My phone is slow and will only work with 3g

i need some help to sort my phone its slow and i cant get it working on my internet connection

Download Firefox 3.6.19:
* http://www.mozilla.com/en-US/firefox/all-older.html
Uninstalling Firefox
* https://support.mozilla.com/en-US/kb/Uninstalling%20Firefox
* DO NOT SELECT TO REMOVE YOUR USER DATA AND SETTINGS
Installing Firefox (3.6.19) on Windows
* https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Windows
Check and tell if its working.

Similar Messages

I've just updated OS to 10.10.1 and Finder keeps trying to open and then closes every 2 seconds with the message Finder is not Available. If Safari is opened full window it immediately closes and will only work with window smaller than maximum.

I've just updated OS to 10.10.1 and Finder keeps trying to open and then closes every 2 seconds with the message Finder is not Available. If Safari is opened with the window full screen it immediately closes and will only work with window smaller than maximum. Driving me mad! Any help please!!

Hi Linc
Thank you for your response.
I'm a bit of an amateur so I hope below is the information you've asked for:
Step 1
23/11/2014 09:19:14.007 ReportCrash[294]: Saved crash report for Finder[4349] version 10.10.1 (10.10.1) to /Users/AAAA/Library/Logs/DiagnosticReports/Finder_2014-11-23-091914_BBBB-MacBoo k-Pro-2.crash
23/11/2014 09:19:14.008 ReportCrash[294]: Removing excessive log: file:///Users/AAAA/Library/Logs/DiagnosticReports/Finder_2014-11-23-091840_BBBB -MacBook-Pro-2.crash
23/11/2014 09:19:14.000 kernel[0]: CODE SIGNING: cs_invalid_page(0x103809000): p=4357[Finder] final status 0x3000a00, denying page sending SIGKILL
23/11/2014 09:19:14.000 kernel[0]: CODE SIGNING: process 4357[Finder]: rejecting invalid page at address 0x103809000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
23/11/2014 09:19:14.454 com.apple.xpc.launchd[1]: (com.apple.Finder[4357]) Binary is improperly signed.
23/11/2014 09:19:14.454 com.apple.xpc.launchd[1]: (com.apple.Finder) Service only ran for 0 seconds. Pushing respawn out by 1 seconds.
23/11/2014 09:19:15.584 Finder[4359]: assertion failed: 14B25: libxpc.dylib + 97940 [9437C02E-A07B-38C8-91CB-299FAA63083D]: 0x89
23/11/2014 09:19:15.000 kernel[0]: CODE SIGNING: cs_invalid_page(0x10bfbf000): p=4359[Finder] final status 0x3000a00, denying page sending SIGKILL
23/11/2014 09:19:15.000 kernel[0]: CODE SIGNING: process 4359[Finder]: rejecting invalid page at address 0x10bfbf000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
Step 2
Process:               Finder [4626]
Path: /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
Identifier:            com.apple.finder
Build Info: Finder_FE-932001003000000~1
Responsible:           Finder [4626]
PlugIn Path: /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
PlugIn Identifier:       com.apple.finder
-0 sec                         CODE SIGNING: cs_invalid_page(0x10c9a5000): p=4626[Finder] final status 0x3000a00, denying page sending SIGKILL
-0 sec                         CODE SIGNING: process 4626[Finder]: rejecting invalid page at address 0x10c9a5000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
-2 sec                         CODE SIGNING: cs_invalid_page(0x10c5b3000): p=4624[Finder] final status 0x3000a00, denying page sending SIGKILL
-2 sec                         CODE SIGNING: process 4624[Finder]: rejecting invalid page at address 0x10c5b3000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
-3 sec                         CODE SIGNING: cs_invalid_page(0x10f4bd000): p=4622[Finder] final status 0x3000a00, denying page sending SIGKILL
-3 sec                         CODE SIGNING: process 4622[Finder]: rejecting invalid page at address 0x10f4bd000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
-5 sec                         CODE SIGNING: cs_invalid_page(0x105ecf000): p=4620[Finder] final status 0x3000a00, denying page sending SIGKILL
-5 sec                         CODE SIGNING: process 4620[Finder]: rejecting invalid page at address 0x105ecf000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
-7 sec                         CODE SIGNING: cs_invalid_page(0x1012cd000): p=4617[Finder] final status 0x3000a00, denying page sending SIGKILL
-7 sec                         CODE SIGNING: process 4617[Finder]: rejecting invalid page at address 0x1012cd000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
--> __TEXT 000000010c966000-000000010ce55000 [ 5052K] r-x/rwx SM=COW /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
    __DATA 000000010ce55000-000000010cf53000 [ 1016K] rw-/rwx SM=COW /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
0   com.apple.finder                                 0x000000010c9a521f 0x10c966000 + 258591
10 com.apple.finder                               0x000000010c9977b5 0x10c966000 + 202677
11 com.apple.finder                               0x000000010c988154 0x10c966000 + 139604
12 com.apple.finder                               0x000000010c987e15 0x10c966000 + 138773
13 com.apple.finder                               0x000000010c987d35 0x10c966000 + 138549
14 com.apple.finder                               0x000000010c987cfd 0x10c966000 + 138493
28 com.apple.finder                               0x000000010c96b960 0x10c966000 + 22880
1   com.apple.finder                                 0x000000010c98a69d 0x10c966000 + 149149
2   com.apple.finder                                 0x000000010c98aba7 0x10c966000 + 150439
3   com.apple.finder                                 0x000000010c9795d2 0x10c966000 + 79314
4   com.apple.finder                                 0x000000010c98aa0b 0x10c966000 + 150027
5   com.apple.finder                                 0x000000010c98a952 0x10c966000 + 149842
6   com.apple.finder                                 0x000000010c98a78a 0x10c966000 + 149386
7   com.apple.finder                                 0x000000010c979496 0x10c966000 + 78998
8   com.apple.finder                                 0x000000010c98a548 0x10c966000 + 148808
9   com.apple.finder                                 0x000000010c98a410 0x10c966000 + 148496
10 com.apple.finder                               0x000000010c983df6 0x10c966000 + 122358
       0x10c966000 -        0x10ce54ffb com.apple.finder (10.10.1 - 10.10.1) <33C3024A-4A16-3485-B2B1-89FA33B9558A> /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
Many thanks
David

I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for

I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for Premiere. I dont have any other serial numbers. What do I do???

Static_Unit
I am getting a bit concerned about what is happening in your situation. Yesterday you posted your question in at least two different forums, one of them being here in the Premiere Elements Forum.
Don't Have Serial Number for Premiere, Only Photoshop?
Wherever you posted, the reply was to contact Adobe via its Adobe Chat. It is the only one who can sort out this matter for you.
In the thread cited above I offered to help you with the difficulties that you were having visualizing the Adobe Chat in its web page. I was waiting for your follow up on that in the above thread. Instead, I find your same question in a new Adobe Premiere Elements Forum thread this afternoon with no refer the prior threads or prior recommendations given you.
I will also mention again...when you buy the Photoshop Elements and Premiere Elements bundled in one packaging and with installation files for each on the same installation disc, each program has its own serial number. The Photoshop Elements serial number does not work for Premiere Elements and vice versa. The serial numbers are on labels on a box which houses the installation disc envelope(s). So, if you purchased both programs and found the Photoshop Elements serial number, then the Premiere Elements serial number should be in a label right underneath the label with the serial number for Photoshop Elements. I recall writing this in your yesterday's thread on this matter.
The moderator will no doubt be along shortly to close or delete this thread. So, just in case, please bookmark your yesterday's thread cited above so that we can continue this communication which is trying to help you.
Thanks.
ATR

I have a new imac with imovie 11 however my hd everio camcorder will only work with imovie 8 or 9 how do i download imovie 9? all i can find are updates and my mac says i don't need it

i have a new imac with imovie 11 however my everio hd camcorder will only work with imovie 8 or 9. i tried to download imovie 9 but my mac says i don't need the update. How can i download imovie 8 or 9 complete not the update?

I really appreciate all your help. Today I spent some time on the problem. First I purchased any video converter from the ap store and then I connected the camera to the mac with the original usb cable that came with the camera. I turned on the camera and selected backup on pc and the logo came up on my home page. I opened it and after several attempts i found the 3 video files that were on the camera. I then converted them from a tod file to mp4 and then transfered them to imovie. Now I have to figure out how to send the video to youtube or move it to an external hard drive which I have not been able to do. So far I am not too fond of imovie 11. If you could send me the download for imovie 6 I then could try that route. When talking to apple support yesterday about the problem they suggested to get Final Cut Express. It's 200 bucks so before i order the install disc i would like to try your suggestion. My email address is [email protected] Again I thank you very much for your help! George

Can I still download Adobe 9 Pro Extended and will it work with Windows 8 64 bit?

Can I still download Adobe 9 Pro Extended and will it work with Windows 8 64 bit?

It is not clear what application you mean when you say Adobe 9 Pro Extended, so it ois not certain if it is available for you to download. If you can diownload it, it will only be valid for a 30 day trial unless you already own it and have a serial number to activate the trial with.
You can search the following site and see if you can find the trial version to download... this site is the only likely place you might find the software available for download.
If you find it there, be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
http://prodesigntools.com/tag/ddl

How can I get a sim card for Japan and will it work with my locked Iphone 6

How can I get a sim card for Japan and will it work with my locked Iphone 6

You cannot use a SIM card on a carrier locaked phone, other than a sim from the carrier the phone is locked to. You must first get the carrier it is locked to, to unlock your phone. Apple does not unlock phones.

I am from turkey and Iphone4 can be used Turkcell and vodafone(carriers) in turkey but i bought my iphone in usa and it only works with at&t.Is there anything i can do to use my iphone with turkcell or vodafone?

I am from turkey and Iphone4 can be used Turkcell and vodafone(carriers) in turkey but i bought my iphone in usa and it only works with at&t.Is there anything i can do to use my iphone with turkcell or vodafone?

No. Return it and get your money back if still within the 30 day return window. All US iPhones are carrier locked and cannot be officially unlocked.

HavI e Photoshop cs6 Extended Student and Teacher Edition/ can it be installed on two pc's and will it work with Windows 8.1

havI e Photoshop cs6 Extended Student and Teacher Edition/ can it be installed on two pc's and will it work with Windows 8.1

Yes

How do I do a defrag? My machine is running slow and defragging always worked with Microsoft. Thanks in advance.

How do I do a defrag? My machine is running slow and defragging always worked with Microsoft. Thanks in advance.

Pat,
Use Activity Monitor to keep an eye on your disk use and memory use. You may hear different figures, but I like to see my free disk and free memory above 25%. Sometimes all it takes is a Restart. Try to minimize the number of browser windows you have open at once. Quit unused applications.
Many of us in this discussion area like to use OnyX periodically. It clears caches and repairs permissions, etc. You can download it from this site. Be sure to download the one for the OS version you are using. There is a script called Automation within OnyX that allows you to start it and come back later when it's done with several actions.
Jerry

Safari is not working and siri only works with the phone not internet related questions.

I have an Iphone 5 and for about 8 months it worked find, then somewhere along the line I think about the time I upgraded to the latest OS, Safari stopped working. That is when I hit a link from email or open safari I get the browser window but nothing works, like its been blocked. Siri of course only works with internal serches, through contacts and such. My other browsers (crome, oprea and mercury) work fine. I have been through all the internal settigns I can find, but nothing has worked. Have cleared history cookes with no suceess. Any ideas?

Hello Mike,
Thank you for providing so much detail about the issue you are experiencing with Safari after upgrading to iOS 7.
The first thing I recommend is quitting and relaunching the applications on your iPhone:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
You can find the full article here:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If you are still seeing the same issue after quitting and relaunching the apps that are open, I recommend restarting your phone and then resetting if it's still not working:
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Note: Reset your device only if you are unable to restart it.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
You can find the full article here:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, the last thing I recommend is backing up and restoring your iPhone:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thank you for using Apple Support Communities.
Best,
Sheila M.

I am using Windows 7 64-bit on a partitioned hard drive on a MacAir. The trackpad will only work with a click. How do I get the full function of tap and scroll?

I am using Windows 7, 64-bit on a partitioned hard drive on a 2012 MacAir. The trackpad only works with clicking. How do I get the full function of tap and scroll? (I have this on a 2011 Mac Pro with 32 bit Windows 7 and it works properly.)

Windows Control Panel>Boot Camp Control Panel>Trackpad.

If I buy an iPhone 5s in America will it work in Ireland , and will it work with the irish 4g

Hi I am going to America next week and want to buy an iPhone and I am wondering if an iPhone 5s bought in America will work with the irish 4g network when I come home? Please help

In general LTE will only work in the world region the device was designed for. And for it to work correctly all of the bands for your region must be supported by the device.
So assume that a North American iPhone will not work on LTE in Ireland, and decide if it is worth the difference in cost. Remembering that the prices you see advertised in the US are subsidized prices, and an unlocked phone costs much more than that. For example, a 5S 16 GB is $649, a 32 GB is $749, and a 64 GB is $849. To this you must add sales tax, typically 8% to 10% depending on where you buy in (NYC is 8.75%).
Then once you get it back to Ireland you must pay import duty and VAT, unless you smuggle it in. If you get caught smuggling it there will be a penalty on top of the duty and VAT, and they may even seize the phone. I have no idea what the chance of getting caught is, but if I were a customs inspector I would watch for things like that.
And finally, once you have it safely in Ireland if it ever needs service you will have to bring it back to the US.

F9 and F10 only work with fn pressed

My F9 and F10 keys only work with fn pressed, whereas all the other top line function keys will work alone.
Is this normal?
Mike

Well for the backlight function I don't believe it can be changed. For Expose´however you need simply to go into System Preferences. There you'll see the control for Dashboard & Expose´. From there you can change the function keys for Expose´ if you want.
Jrsy

MyDAQ fails Self-Test and will not work with any software

I cannot get the myDAQ to communicate properly. I did everything I could to make sure that the device was detected by the computer. It shows up in Device Manager under Data Acquistition Devices as NI myDAQ and in NI MAX as "myDAQ1", but I receive errors when trying to use it with any NI program.
Trying to self-test or reset the device in MAX gives these errors:
-The self test failed. -88705 The specified device is not present or is not active in the system. The device may not be installed on this system, may have been unplugged, or may not be installed correctly.
-There was a problem resetting the device. Error code: 80040383.
It also gives this error when trying to use the Elvis Oscilloscope:
-Error -200324 occurred at ELVISmx_DAQmx Create Channel (AI-Voltage-Basic).vi:1
Possible reason(s):
NI-DAQmx is unable to communicate with the device. Make sure the device is present in and accessible to the system, is not currently being reset, and is not reserved by another driver such as Traditional NI-DAQ (Legacy).
I have uninstalled and reinstalled and repaired all installed NI products twice. I updated to NI-DAQmx 9.8.0 and am using NI Elvis 4.5. I have checked NI Device Loader and mDNS Responder Service in Services and everything is running properly. I have also tried Reset Configuration Data in NI MAX several times. I turned Fast Startup off as suggested in one article. I have tried plugging it into every single USB port on my computer; all 8 of them. The blue led is on when plugged in, but I cannot figure out why it will not work with any of the software. I am running Windows 8 Pro 64-bit. Also, it completely works on the school computers running Windows 7 without any problems. I would like to have it functioning with all the NI software purchased, but all I want to do is use the oscilloscope software for now. It has honestly been way too much work and a huge loss of time for something that should work out of the box. Please help me resolve this, thanks.
Attachments:
ni_support.zip ‏341 KB

Hi chaka123,
I had already read that article so it wasn't anything I hadn't tried. I did, however, uninstall both NI DAQmx and NI ELVISmx, ran the registry cleaner and then plugged my device in. Now it shows up as USB Flash Firmware Updater. This is actually what it showed the first time I plugged this in out of the box. After much troubleshooting I was finally able to get it to at least recognize it as a myDAQ. This is problem I know others have had.
To answer your questions:
Does the Test Panels work at all?
I am not sure, I didn't try it before uninstalling. Now the Test Panels isn't an option because it is recognized as the Flash Firmware Updater.
Have you tried to delete the device in MAX?
Once again, I cannot because it shows up as Flash Firmware Updater.
Which is the color of the icon on the left side of “myDAQ1”?
It was green before the uninstall. Now it shows the USB symbol.
I tried deleting the driver. When I plugged the device back it, Windows started automatically trying to load a driver for it. Now it shows as NI myDAQ with a yellow exclamation symbol. In MAX it shows as NI myDAQ with a USB symbol. Under Driver Details it says "Windows does not have a driver associated with your device."
What folder can I manually point Device Manager to in order to load the correct driver?
Attachments:
devicemanager.PNG ‏40 KB

I use virginmobilebroadband2go on my desktop, ie8 or anything but google so far is too slow. want to change to you guys, but how fast is it and will it work with my bb2go ?

Virgin Mobile Broadband2go usb, ie anything too slow and lags, found google chrome to be good, but they have gone Government on us!!! So i wonder if Firefox is compatible, slow? will it be as fast as chrome before I install? Any problems with using bitcomet or other torrent search things? Thanks... If not can you or will you suggest a simple browser that wont Big Brother us? (watching!)
BTW your Thunderbird is awesome..

All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

My phone is slow and will only work with 3g

Similar Messages

Maybe you are looking for