My phone is still disabled after software update and i cannot seem to reset my passcode someone help me

my phone is still disabled after software update and i cannot seem to reset my passcode someone please help

Does the Ipod see the network?
It sure sound like the drop cause some other internal damage like breaking/loosening the connection to the antenna. See:
http://www.ifixit.com/Teardown/iPod-Touch-4th-Generation-Teardown/3562/3

Similar Messages

IPhone 5c voice dial cannot be disabled after software update. Is there any way around this?

iPhone 5c voice dial cannot be disabled after software update. Is there any way around this?

Hi! It seems you found a bug on iOS 7.1
To disable Voice dials try this, (I saw in an iPhone website here in Brazil):
1. Turn on Siri (settings > General > Siri)
2. go to (Settings >Passcode > Voice Dial) trust me, it appears now
3. disable Voice Dial
4. go back and disable Siri
hope this could help you!!

N97, issues still unresolved after software update

I was happy to see the latest software update from Nokia for N97 hoping it would have solved the issues but I was very disappointed experiencing the same problems that I was getting before and worst part was new problems have also
been experienced.
Old problem which is still not solved
It is still impossible to get the phone working if it switches off by battery getting fully drained. The battery doesn't start
charging even if you put the phone in charging for 24 hours. The charging light blinks but the phone doesnt charge.
New problem after software update
Even if the phone is put on charge for 24 hours, it doesnt get fully charged. Infact the battery indicator doesn't climb up after 2 points and after using the phone for a small time, it says battery discharged and phone switches off.
I have always been stuck to Nokia phones since I've started using handphones but am having the worst experience with
this N97. God knows when the Nokia people will wake up and provide a final solution to this.

Try pulling the battery and leaving it out for 5 minutes. Put back together and commence a recharge. Se if that helps.
Nokia N8 on O2-UK
Firmware 022.014

My phone wont turn on after software update?

i jus recently updated my nokia 5530 xm to the new software update and after updatin my phone just wont turn on. when i try to turn it on it just vibrates and then turns off again???

check this link :
/t5/Pool-of-Knowledge/Recovering-from-a-failed-firmware-update/m-p/398147/highlight/true#M112
-you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
-if my answer was the solution , so click accept as solution button
Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

HT5654 phone in not activate after software update

phone in not activate after software update

Activation issues are typically the result of a device that has been hacked or jailbroken. If that is the case, no support can be provided here.

HT5654 my phone isn't working after software update, what happened??

So I updated my Iphone 4s with the new 7.1.1 software update and now my phone is stuck with the screen showing the itunes logo and under it an arrow pointing at the logo with the power cord underneath. Itunes store says that my phone is currently in recovery mode. ***? I wasn't trying to recover the phone just update the freakin software!!! Getting real close to getting my Samsung S5 now!!

iPhoto 9.5 is free if you are an iPhoto '11 user. To check this, open a Finder window and select Applications in the sidebar. Then, right-click iPhoto, select Get Info and see the iPhoto version. If it's 9.x.x, you are running iPhoto '11.
If you are running iPhoto '11. switch the Mac OS X language to English in System Preferences > Language & Region, and restart. If not, you have to buy iPhoto '11 in the Mac App Store

I updated my Torch to the latest software update and it now locks up, resets and is totally unstable...help

I updated my torch a few days ago and ever since I did it has become so unstable.
I tried redoing the update numerous times and it is not getting better?
Phone was working fine prior to update and it now resets and locks up constantly.
Help .
I can't use it

Hello!
At the top of each device forum, there should be some "sticky" threads that discuss the OS levels available for many models. If they include your model, then please use those as reference as you proceed. Otherwise, you will have to dig through the official download portal for OS packages for your model:
http://us.blackberry.com/support/downloads/download_sites.jsp
From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
You may also want to try this procedure to perhaps narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT1277 i just updated with the new update and now cannot get into my email. please help!

i just updated with the new apple update and now cannot get into my email. i get an error message that i tried to open mail version 4.5 and cannot in apple os x please help!

This happened because if Mail.app was moved from /Applications or placed in a sub-folder there, the update (Security Update 2012-004) couldn't find it and fails for writing new files to Mail. This update updates Mail 4.5 to 4.6, consequently the message that 4.5 is incompatible, since it's looking at the now "old" 4.5 version. See the thread linked below for a fix and some other possible workarounds.
https://discussions.apple.com/thread/4311280?tstart=0
Basically, make sure Mail.app is in the Applications folder inside the Macintosh HD folder, and sitting by itself not in an enclosing folder. Then get the update from Apple Downloads and run that again.

I can not get the phone to turn on after software update iphone 4s. it is showing the itunes and a cable, what should i do?

I cannot getr my phone to turn on after a software update. it is only showing the itunes icon and a cable. What should I do /

Hi patche,
I would recommend you to connect the iPhone to iTunes and follow the steps provided,
Once you connect the iPhone to iTunes you will be able to Set-up your iPhone on the iTunes itself with the available options.
HOPE THIS RESOLVES THE ISSUE.
Regards,
Abhishek D.K

HT4623 phone wont turn on after software update

iphone wont turn on after software update

Same issue so I connected to itunes. Itunes said phone is in recovery mode. I completed recovery process. Itunes then said phone could not be recovered and my screen is stuck on connect to itunes?!?!?!

After software update and restart, acts like it's a new install?

Greetings All,
After doing the recent software update on my son's 20" iMac C2D machine, I did the restart and once it reboots I get the "quick start" page as if it were a new install of Leopard and nothing were no user accounts set up. I can restart in target disc mode and connect to the iMac with my MBP, everything is still there, including all the recent files on the desktop. The Time Machine back up is also in tact.
Why can't it see the account and boot up? Any way to boot from the Time Machine back up? Any help is much welcomed at this point as my son needs to do some school work tonight.

By "quick start" do you mean the Setup Assistant that, among other things, lets you setup the first user account? If so, go with it. When you get to setting up that account, ensure that the "short name" exactly matches the name of the lost home folder. The new account will "adopt" that folder & you should be back in business.
FWIW... an alternative would be to setup a temporary account like "test". Once you have access to the system, you'd go to SysPrefs->Accounts and add a new user whose short name, again, matches the name of the home folder you want. In this case, it will say that a folder with that name exists & ask whether you want to use it. This method is useful if you can't remember the exact name of the folder in question - you can open the Users folder and copy the name letter for letter.

My iPhone 4 is disabled after the update and I don't know the passcode

I left my phone updating through the night. Checked on it at 4.30am and went through the bits and set up a passcode. It seems now that the passcode isn't working and my phone has been disabled.
I've tried to restore and backup but nothing is working.
I'm lost as to what to do next.

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...

Finder freezing after software updates and uninstalling

Help!!!
I updated iTunes,Safri and an secriuty enhancement as the automatic reminder, it hang up at disk optimizing(77% competed) after installation, I had to forcely shut down, then I uninstalled several unnecessary softwares.
Then the finder froze, I failed to open any software, the coloured cursor keeps rolling and rolling.
But the folder operation is functioning.
What should I do?
Help!!
Junxing

I don't have an answer to fix your problem unless you have your hard drive backed up onto another hard drive, but the answer would of course be obvious if this were the case.
I would like to point out that everybody that has a computer, laptop or desktop, should have their entire hard drive backed up onto another hard drive. It should be considered as a requirement, not a luxury.
Next, before ever installing a software update, you should run the "Repair Disk" function and also the Repair Permissions function of the Disk Utility app, from the install DVD. If there is corruption in your disk directory and you go ahead and install a software update, all manner of problems may arise.
I never let the software update Install automatically. I always download the update software, then do the preventive disk repair, permissions repair, then do a fresh backup of my entire hard drive, then run the update software's installer. Now if anything goes amiss, I am not out a thing, and I am in a good position to troubleshoot. So far I have never had any problems with any updates but this method will pretty much make sure that if you do ever have a problem you are not in any trouble. Just restore from your current, fresh backup.

After Software update yesterday, ibook cannot reboot & stay in blue screen.

After yesterday software update, My ibook restart and got stuck in the blue screen with the spinning spiral icon in the middle of the screen.
I try to reset the pram and PMU but in vain.
I also use CRTL-V while rebooting and found the repeating last few lines which the command prompt shown was as follow:
localhost/system/library/coreservices/loginwindow.app/contents/MacOs/loginwindow s:Login Window Application Started
Anyone can assist, thanks in advance.

I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html

Macbook crashed after software update and won't reboot!

I have installed the latest updates on my 2.16Ghz, 10.5 Leopard, 1Gb MacBook through the software updater. There were 10 new udates inluding iTunes, Macbook security update and some for logic Pro.
The machine crashed with the 'hold the power button' type message which i did! after switching the machine back on, it boots into the Mac OSX setup assistant, so i assume i have lost my data? However, even if i enter all my details and complete the assistant, after clicking 'done', the assistant runs again!!!
I have applecare but they're now closed so i thought i'd see if anyone can help me out as i need it up and running asap.
Thanks,
Chris

Boot from your system install DVD, run Disk First Aid from your Disk Utility and repair your permissions.
-Bmer
Mac Owners Support Group - Join us @ MacOSG.com
  Mac611 Mobile Mac Support - about.Mac611.com
   iTunes:MacOSG Podcast | YouTube.MacOSG.com
                   An Apple User Group 
Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'

My phone is still disabled after software update and i cannot seem to reset my passcode someone help me

Similar Messages

Maybe you are looking for