My phone is stuck on recovery mode help!!!!
so i was updating to ios 7.1.2 on my computer then it was updating then out of no where it got stuck updating it wouldn't do anything the bar was stuck so Ithought why not restarted then it says connect to itunes with lightning cable so I did then nothing itunes don't react ot tell me to restore i did there steps in apples website when stuck but my computer just doesn't react and I know it ain't my computer or cable is because It was just working 30 minutes ago and it recongnized it until this incident plus if i leave it plug for a while it shows an error (0xE8000065) help please!?!?!?
If you followed the instructions exactly as in HT1808 without success, the only thing left to try is the DFU mode:
Power down the iPhone and disconnect from the computer. Start iTunes on the computer and connect the USB end of the cable.
Hold the power button on the iPhone and connect the other end of the cable, keep holding the power button for three seconds and then press and old the home button also. Hold both buttons for ten seconds and then release the power button and continue to hold the power button for an additional twenty seconds. Then release.
You could not be in DFU mode and iTunes should see the iPhone.
Similar Messages
-
I tried updating my phone to the iOS 6 software, and my iTunes won't read my phone at all. It keeps saying that "your iphone is in recovery mode and needs to be restored." I restored it for an hour and it didn't work at all. Now my phone is stuck in recovery mode. I'm away at college and I don't know how to fix it. Help!
No, it is my phone that I've had since 2009. I just hate updating it because every time I do something goes wrong. So I put it off as long as possible. I am getting a new iphone, but I read that to have your backup transfer to the new phone, it must be a backup from the current ios.
-
So i tried downloading ios8 and my phone is stuck in recovery mode. i have tried to restore it in itunes and it continues to say itunes does not recognize my phone. i have all my systems up to date and i have tried restarting my computer. help
Me too and I have 4 devices which are now not recognized by iTunes but were immediately before ios8 upgrade
Come on Apple get your finger out and help us here please ? -
Please help. i phone is stuck in recovery mode
its an iphoen 3 and my phone is stuck in recovery mode and when i tried to restore it in itunes it gives me error 1600. i have tried closing and reopening itunes well my phone is plugged in and i have tried new cords (i have four) my usb port is in perfect condition its a brand-new computer
See these tips: http://support.apple.com/kb/TS3694#error1604
-
Can anyone help me with my phone being stuck in recovery mode? I have looked all over the internet and have had no success. I have not tried to restore it with Itunes, because my data is not backed up and I don't want to lose it. Tinyumbrella would not work and the apple support website is completely useless!
Thanks, I figured that out, so I went ahead and restored it, which also didn't work! It gave me an error 3194, which I also can't figure out.
-
started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?
Any numbers or other details on the mesages given?
Did you try to connect in recovery mode again? iOS: Unable to update or restore
In case your network connection timed out, check your security software settings: iTunes for Windows: Troubleshooting security software issues -
I've been lazy about updating my phone. I plugged it into my computer tonight, the prompt came up and I absentmindedly clicked OK, you get the picture. It claims the update failed and now my phone is stuck in recovery mode. I can't believe I didn't back up my phone before I did this - I just wasn't thinking. Have I lost all my videos and pictures?
They should have been part of the backup. If you have already restored from the backup and they are not present on the phone, then they are gone. If you have not yet attempted to restore, just restore already... you don't have any other choice. Debating whether something will be there or not is pointless. It will, or it won't. discussing it won't change that.
-
I attempted to update to iOS 8 and now my phone is stuck in recovery mode, and iTunes will only let me restore to factory settings. My question: Can I restore from iTunes backup after restoring to factory settings?
Hi, kformagg
I would say yes. I once had the same problem (iPhone 5, IOS 7) and first restored to factory settings and after that from iCloud backup.
It worked very well. -
my phone is stuck in recovery mode, am i able to restore without loosing all contacts? p.s i dont have my original computer
Thanks, I figured that out, so I went ahead and restored it, which also didn't work! It gave me an error 3194, which I also can't figure out.
-
my phone got stuck in recovery mode after update to IOS 5.0.1, how can I solve it ?
Read this
http://pathumf.blogspot.com/2011/11/how-to-reboot-stuck-iphone-iphone-4s.html -
i tried updating my iphone 4s to the ios 7 but it said error with the firmware now my phone is stuck in recovery mode and i have no idea how to fix it any suggestions??
Try Restoring it 3 times in a row and see if that works.
If not that error can indicate one of two things: Your iPhone was at one time jailbroken, had the iOS version rolled back, or ran an unauthorized beta and if none of those things are true it is a hardware error. -
I just tried to install the latest software update for an iPhone 5, and now the phone is stuck in recovery mode. Are there any options available to avoid going through with the recovery. This seems really lame.
No.
You must restore. -
""windows has stopped this device because it has reported problems. (code 43)"" it says this when i connect my iphone4 to my laptop, and the phone is stuck in recovery mode, wat can i do???
Read http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/code-43-wind ows-has-stopped-this-device-because-it/b9cf1b3e-2b71-4b54-adc6-2dda9c73cd5a
-
My phone is stuck in recovery mode-when connected to itunes I get 1611 error code
my phone is stuck in recovery mode-when connected to itunes I get 1611 error code
Please see the More Like This section on the right.
-
Stuck in recovery mode - help please
I am unable to upgrade to 4.3 software and my phone is stuck in recovery mode. I've gone through all the support basics and I have the latest i tunes and op system etc. I cannot get past the basic levels although 4.1 and 4.2 were OK. Any ideas please?
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process.
FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue.
If the errors persist on another computer, the device may need service
Maybe you are looking for
-
Hi Everyone, I have created a LSMW using standard RFBIBL00 .In this i want to pass the value of FWSTE(Tax amount) if XMWST i.e Calculate tax automatically is not checked. For this i have assigned the line item structure to BBTAX in structure relation
-
Skype Name Changed (Yes! my Skype name. Not my Dis...
So i attempted to sign in with my original, as i believe, Skype name and password. They were both accurate. (Trust me. The ink was not smudged.) Sign in failed. Repeatedly. i asked for a reset of the password. Followed the procedure and reset my pass
-
Should I complain to Apple?
So this is getting very fustrating. For the 4th time my microphone has stopped working, & I have applecare. But this is the 4th time I'll have to get it replaced & i'm really bugged out. Last time I went to the Service Provider in a town 30km's away
-
Abap utilisation in SD/XI/BW
Hello all, Am an ABAPer with one and half years of experience. 1)Can somebody tell me how and to what extend(Percantage wise) ABAP knowledge will be utilised in each of the SD/XI/BW. 2)Which one of these three is best so that my ABAP knowledge if ut
-
Output determination in Group - VG01
Hi All, I have been analysing this for a while now and I need your help as I have not found any answers. When I create a group in VG01 the output is not getting determined. No determination analysis exists. But when I goto VG02 -> Goto -> Output then