My phone just got voice over back on randomly and i cant get it off or scroll up and down!! help!!!!
my phone just randomly got the voice over back on and wont let me scroll up and down and wont shut off voice over---tried shutting down and back on but didnt help---------------help!!!!!!!!!!!
Try this...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
Restart / Reset
http://support.apple.com/kb/ht1430
Similar Messages
-
i have music on my phone but not in itunes and i cant get it off my phone .I dont know how it got there , but i suspect it came from icloud.
if it doesnt match that means your iPhone is not provisioned for the carrier you are trying to use. Your iPhone would need to be unlocked in order to use on other carriers. You will need to contact your carrier to see if this iPhone is unlocked py providing them the IMEI. If the iPhone is not unlocked you will need to contact the carrier that the iPhone is locked to to see if they will unlock the device to use on another carrier.
-
I have just got a 5th Gen nano. How do I get Radio to show in menu and play ?
I have just purchased a secondhand 5th Gen iPod nano through eBay to replace my "stolen" one. I am can find "radio" under Main Menu headings but am
unable to reposition item in the normal day to day menu between "podcasts" an d "video camera". I have no problems with my other iPod and this
replacement purchase was to act as extra storage space etc. At 77 years of age I think I am missingsom ething simple !! Advice please.The iPod purchased through eBay was advertised as "5th Generation" in fact it was "4th Generation" !!! It has now
returned and purchase costs will be refunded. Thank you for your interest -
I just got my iPod back it about a week ago. It's been about 5 months? I don't have the computer I first synced it on due to the fact the whole thing just broke on me. So I can't restore it that way. On top of that I don't remember any type of passcode/word I had it's just been awhile. I don't have much money to go to Apple if they do charge me to reset it...really I don't have money at all to pay for anything like that. Is there any other way I could reset the whole iPod and start over? Can anyone help me?
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I was looking at the settings and turn on the phone setting where a voice says the fuction and i cant get back to it to turn it off. i cant scroll to get back to the setting to turn it off.
1. Triple-click the line below to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.
Remove the Norton/Symantec product by following the instructions on either of these pages:
Uninstalling your Norton product for Mac
Removing Symantec programs for Macintosh
If you have a different version of the product, the procedure may be different. Back up all data before making any changes.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Consider installing an ad-blocker and/or a selective cookie block such as the "Ghostery" Safari extension. -
i have just got my 3gs back from my daughter and i have put my sim card in and it comes up as emergency calls only. That is my first problem then when i plug it into itunes it only recognises it as her iphone can anyone help my please ?
I agree with wjosten. Sounds like a sim card issue. Was your sim card removed from a working,activated phone? I've switched sim cards in an iphone multilple times and never had a problem. You might try removing the sim card and reinstalling.
-
Just got my computer back from being fixed and can not load Itunes
Just got my computer back from being fixed, they took Itunes off. Now trying to download it again and this is what happens, it says thanks for downloading Itunes, but it never launches nor can I find it anywhere on my computer. It doesnt launch when I plug my phone in either. I did notice that it says it downloaded a Binary file? This is on windows XP and Im not good at this kind of thing. Can anyone please help me.
try downloading a little bit older version of itunes, thats all i got
-
Just got my MBP back from repair, must have serial to open FCE. My box is on the other side of the country. Awesome.
Phone? E-mail?
Your serial usually appears on the splash screen .... if you get to see that.
mish -
Just got my computer back. How can I reset my itunes so it matches my IPod settings? I have my favorites and files on my IPod that I want to keep and when I try to sync it gives me the option to erase and sync with computer. How can I sync without loosing any music or files at all?
- Transfer iTunes purchases to the computer:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- Transfer other music by using a third-party program like those discussed here:
Copy music from Ipod to new computer...: Apple Support Communities
- Make a backup of the iPod by connecting the iPod to the computer. Right click on the iPod under Devices in iTunes and select Back Up.
- Restore the iPod from backup -
I just got my Mac back from Apple repair and I can't burn a disc. What do I need to do to make that happen?
Hello deneye2112,
Thank you for providing the details of the burning issue you are experiencing. I found some resources that I think might help:
First, I recommend resetting the System Management Controller (SMC) on your Mac (I wasn't sure if you had a removable battery or a built in battery, so I listed the steps for both):
Resetting the SMC on Mac portables with a battery you can remove
Note: Learn about removing the battery on MacBook and MacBook Pro.
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Resetting the SMC on portables with a battery you should not remove on your ownNote: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find the full article here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
If you are still having trouble with burning after that step, I recommend reviewing the section titled "Top troubleshooting tips" in the following article:
Disc Burning Quick Assist
http://support.apple.com/kb/HT1152
Thank you for posting in the Apple Support Communities.
Best,
Sheila M. -
my phone just got repaired but i allowed for my niece to play with it but now its say iphone disabled connect to itunes what do i do
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps... -
Just got my MBP back with a new logic board but...
Hello all
I just got my laptop back yesterday. They did the logic replacement due to a bad graphics card (nvidia) I was not under warranty. I was having the Videocontroller error on the AHT. I just ran the AHT today via the apple disc. It came up with 4SNS/1/40000000:TGOD-86.500. I also noticed my superdrive does not accept blank disc media, it spits them out after a few seconds in. It still install and read programs off it. Burning discs is just the issue. I posted that issue here http://discussions.apple.com/message.jspa?messageID=12410595#12410595 But prior to the new logic board, it recognized the discs as "blank"
Please any help would be appreciated.
MarcI had an issue whereby only certain DVDs were usable.....some were, and some weren't.
My MBP went in for repair and the SuperDrive was replaced under my AppleCare extended warranty.
You'll likely need your SuperDrive replaced.
If I didn't have Applecare, I'd be up Shyte Creek by now with some very costly repairs on my September '08 MBP.
BTW, My MBP had two logic board failures in its second year of ownership which were replaced under my AppleCare warranty.
Message was edited by: AnonyMouse -
hey! my i just got my ipad back from having it taken away for a long time and i have know idea what the passcode is ive tried everything and i have no idea what to do
Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here. If you have IOS-7, read this. -
Just got my MacBook back from 2nd repair
I just got my MacBook back today. It just had its 2nd logic board replacement because of the random shutdown issue.
When I picked up my computer, they also replaced the Top Case Housing and the Keyboard. Why would the replace this? Does the keyboard and top housing have anything to do with the random shutdown?
Anyways, I will see if my random shutdown comes back. I surely hope not.Oh ok. I noticed the feel of it is a bit different
than before.
Another question. I have CoreDuoTemp opened, my
computer has been on for 30mins and it only shows
22-27C. Is this correct? Or is CoreDuoTemp
malfunctioning?
At 30mins, my MacBook was at least at 45C always.
It's an Intel processor design fault. I got this info from the Hardware Monitor developer.
Q: I have a Mac with an Intel Core Solo or Core Duo processor.
Sometimes, the temperature readings seems to "hang" and are no longer
being refreshed. Is this a problem with the application?
A: No, this problem is caused by an internal design flaw of current
versions of Intel Core processors. The Digital Thermal Sensors may
stop working when the processor returns from a C3/C4 power saving
state. Intel plans to correct this hardware bug for future steppings
of the CPU.
Intel refers to this hardware problem as Erratum AE18. For detailed
information, please see Intel document 30922204
http://www.intel.com/design/mobile/specupdt/309222.htm
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
An Apple User Group -
HT1688 my phone just shut off and i cant get it back on, what do i do?
my phone just shut off and i cant get it back on....what should i do?
Reset, hold both home and power buttons until the iPhone begins to start, usually takes about 10 seconds of holding both buttons. If nothing, Reset while connected to charger, this can take about 20 seconds of holding both button while on charger.
Maybe you are looking for
-
can i text international from one iphone to another iphone over wifi with other friends that have iPhones who will be with us overseas?
-
Third Party 2 in 1 Camera Connection Kit and iOS 4.2
Has anyone tried the third party 2 in 1 Camera Connection Kit with iOS 4.2? This is the connector that has both the SD slot as well as the USB slot in one unit, rather than the two separate units on the Apple branded one. The third party one is cheap
-
What should be the average battery life of Macbook Pro 13 Late 2011 running on Yosemite now?
I have the mentioned macbook. Its battery lasts about 3.5 hrs on normal use like browsing fb, using keynote and about 1-1.5 hour of youtube. Is it normal for this use or something wrong in my mac
-
Do you know how to delete PW of iMac OS?
Any one know how to delete the PW of iMac OS(Lion Ver.) ? It's necessary to log on iMac OS when I lost PW or Keyboard doesn't work. Please let me know how to initialize the PW(Pass Word) of iMac OS(Lion) without keyboard?
-
Define shipping data for Plants (STO)
Hello! Could someone could help with advice: how to set up shipping data for Retail plant.. It is not possible to add new values in IMG --> Set up stock transport order --> Define shipping data for plants. How can I add retail plant in this activity?