My phone just turned off by itself now it wont turn back on, iv conected it to the computer but it still wont show anything on the screen?

my phone just turned off by itself now it wont turn back on, in connected it to the computer but still nohting happens on the screen?

Im afraid that my phone might have died ;(   it went off by itself  with no reasons, it wasnt exposed to any liquids or anything, it just went off   This is sad
I hope there is a solution for this

Similar Messages

  • I turned on my computer but it doesn't show anything on the screen

    I turn on my iMac, I hear it running, but the screen doesn't show anything and it also doesn't make the 2 beeps it usually makes when I press the power button. There is also slight ringing when it is off and still connected to a power source.
    I've tried disconnecting the power cord for 30 seconds, plugging it back and waiting a few more seconds and turn it on.
    Here are the things it has:
    2.5GHz quad-core Intel core i5 processor
    4GB of 1333MHz DDR3 SDRAM
    500 GB 7200-rpm hard drive
    AMD Radeon HD 6750M graphics processor with 512 MB of GDDR5 memory
    Thunderbolt port
    I have not updated to Mavericks or Mountain Lion OS X
    The Model No. Is A1311

    Hello Salavaur,
    Thank you for contacting Apple Support Communities.
    You can use the following article to troubleshoot the video issues on your iMac:
    Apple computers: Troubleshooting issues with video on internal or external displays
    Regards,
    Jeff D. 

  • My razr m just stopped working turned off by itself and will not turn on

    my razr m just stopped working turned off by itself and will not turn on

    raamw,
    My wife has the exact same phone and I have the razr HD (basically the same, just larger screen etc).
    We have run into the same thing a few times, and as stated above by Callie I have found it is a dead battery issue. BUT unlike my previous phone (Droid incredible) that I could usually plug in, wait a few minutes, then at least turn on and use while plugged in, I have found for the M and mine it really took a bit to get it charged.  Kind of like as long as there is some battery you are ok, but once it dies it takes a bit of charging.
    ALSO - I am going to perhaps not use the right terms or words for this, but  I THINK (emphasize think) at least once it wasn't enough to use one of the lower amp chargers.  at least on mine.  tried to charge and charge and didn't seem to work.  Finally I took a charger that I normally need to use for my daughters tablet and use that then it had enough kick.  I will note I think that was the issue.
    regardless each time yes it took awhile before we could turn them on.  ALSO it seemed like it took a much longer time in holding the power button down.  BUT eventually they started up and we were good to go.
    we love our phones, she especially loves the size of the M.  BUT we have learned in the short 2-3 months we have had them, if possible, don't let the thing drain all the way.  just seems to cause a bit of a hastle

  • Airport turns off by itself and won't turn on back again!!!

    hey there, i am currently facing an issue with the airport as by it is turnning off by itself and i cant turn it back on .. i have to restart !!!
    sometimes when i turn on my mac like just now happened it is off and can;t be turned on.
    please if anyone can help i would really appreciate it
    thank you very much

    Hey, in case you haven't been able to find a solution to your original problem with airport turning off, i seem to have found the solution for my MacBook Pro. I called Apple Care and they had me to shut down my computer. Then, while holding down the four keys: command, option, R and P, push the power button to turn on the computer. Do not let up on the four keys until the start up chime has sounded twice. Then let up on the four keys and the OS will boot up as usual. They said what that does is reset your "sleep" parameters on your computer. This seemed to have solved my problem.

  • My iPhone 5 randomly turned off and it now won't turn back on. It had around 80% battery life left. What can I do?

    I have an iPhone 5 which I got around two months ago now, it has been working perfectly but it has now suddenly stopped working. It has randomly turned off and it now will not turn back on. When I last checked it had around 80% battery life left, and I try to charge it now to see if it will have some life back in it, but nothing happens. What do you think I can do? Thank you.

    press and hold the top power button and home button on the front for 6-8 seconds until you see an apple appear, then let go.
    phone will start up now.
    **Do not do this while plugged in to computer.

  • My iphone 4 turned off by itself and will not turn back on. i have tried to 2 methods of recharge and it will not turn on.  can you please help?

    my iphone 4 turned off by itself and will not turn back on. i have tried to 2 methods of recharge and it will not turn on.  can you please help?

    my iphone 4 turned off by itself and will not turn back on. i have tried to 2 methods of recharge and it will not turn on.  can you please help?

  • My iPhone 5 turns off by itself and won't turn on (Only if I press and hold home on/off buttons for 10 seconds)

    My iPhone 5 turns off by itself and won't turn on (Only if I press and hold home on/off buttons for 10 seconds)

    I have a US iPhone and I am in the UK, I had a problem with the battery and got it replaced in a UK Apple store but then I start having a shut down and reboot ...when I called the customer service they said we can't give the UK options since it is a US product!! And that I have to visit one of their stores to get it either repaired or replaced !!!so, is there a possibility to get it replaced in the UK?

  • My phone will not light up when i receve test messages, calls, or other notifications. i have the sounds all turned on and everything turned on i could in the settings but it still wont  work...?

    My phone will not light up when i receve test messages, calls, or other notifications. i have the sounds all turned on and everything turned on i could in the settings but it still wont  work...? please help!!

    Make sure that you have do not disturb off. If you pull up notification center it will be the crescent moon.

  • I started my itunes account on my first computer and just got a new computer. i downloaded it and authorized my computer but i still cant edit songs on the second computer. is it because of the new update or did i do something wrong?

    i started my itunes account on my first computer and just got a new computer. i downloaded itunes and authorized my computer but i still cant edit songs on the second computer. it also wont save things from my phone like playlists. lastly, it says i cant even play my songs without internet connection. what did i do wrong and how can i fix it?

    Copy everything from the old computer or your backup copy of your old computer, to your new one.

  • My phone turned off by itself and won't turn back on.

    My phone turned off by itself and now it will not turn back on. I have tried both a soft and a hard restart and the only thing I get is the Dual Core Technology logo and it just stays on. I tried to do restart in regular and recovery mode and neither works. Is there a way to restart it without going back to factory settings????

        I'm sorry your phone won't turn on jessesealey! I'm sure this is beyond frustrating. Do you know what function was used just before powering off? (text, email, internet, etc.) Has the phone been dropped or wet at all? Even steam/mist? I know a Hard Reset is an inconvenience, so you can try charging for 3-4 hours and try powering back on. If that still doesn't work, a Hard Reset is what will need to be done. http://vz.to/Yg68Th
    Please keep us posted.
    Thank you,
    VanessaS_VZW
    Follow us on Twitter @VZWSupport

  • My iPhone 4s won't turn on, it turned off by itself now it says plug into iTunes? I don't have a computer is this something I can have fixed at the store?

    My iPhone turned off by itself and says to plug into iTunes and won't turn on. Is this something I can have fixed at te store?  I don't have a computer with iTunes..

    You should be able to restore the iPhone, just connect it to the computer and open iTunes.
    Make sure you have the latest version of iTunes installed and take a look at this, if you run in to a problem.

  • AirPort turns off by itself and won't turn on without restart

    Hi
    I noticed that for a week or so, just few days prior to upgrade to Snow Leopard my (fully updated) MacBook Pro's wireless turns off for no apparent reason. When that happenes I cannot turn it on unless I restart the computer. I tried several solutions, from checking whether this is just an incompatibility issue with one of the applications I have, and non of the ones proved to cause the problem. I erased airport preferences, reset the PRAM, took the battery out and work on direct supply, but no change in behavior.
    Now, if anyone have any idea that might work I'll try some options before taking it to service center.
    Thanks in advance.

    I'm getting this same problem on a 5 day old new MacBook pro 15". However I found the "airport" utility.
    /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resource s/airport
    You can turn on logging by using this command
    sudo /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resourc es/airport debug +AllUserLand +AllDriver +AllVendor +LogFile
    Then any airport events will be logged. I happened to have a quick working and then failing error log after turning it on, and it turns out that the problem happens when the Airport receives a false power down message somehow. My network stopped working at 00:13:50
    Tue Oct 20 23:29:24 <configd[14]> bsd_80211_eventcallback: LINK_QUALITY (en1)
    Tue Oct 20 23:29:29 <configd[14]> bsd_80211_eventcallback: LINK_QUALITY (en1)
    Tue Oct 20 23:29:41 <airportd[22]> _airportdTimerCallback: reached...done
    Tue Oct 20 23:30:44 <configd[14]> bsd_80211_eventcallback: LINK_QUALITY (en1)
    Tue Oct 20 23:30:49 <configd[14]> bsd_80211_eventcallback: LINK_QUALITY (en1)
    Wed Oct 21 00:13:33 <configd[14]> _PMConnectionHandler: caps =
    Wed Oct 21 00:13:33 <configd[14]> _wowEnabled: WoW is active on en1
    Wed Oct 21 00:13:33 <configd[14]> _apAppleWoWCapable: AP on en1 does not support Apple sleep notifications
    Wed Oct 21 00:13:33 <configd[14]> wowCheck: Setting maintenance SSID for en1 to 'LookBehindYou'
    Wed Oct 21 00:13:50 <configd[14]> _PMConnectionHandler: caps = CPU Video Audio Net Disk
    Wed Oct 21 00:13:50 <configd[14]> _PMConnectionHandler: Applying power pref for en1
    Wed Oct 21 00:13:50 <airportd[980]> airportd started
    Wed Oct 21 00:13:50 <airportd[980]> _APXMIGwakeupAirPortdServer: received 'DLIL callback'
    Wed Oct 21 00:13:50 <airportd[980]> processdlilevent: Interface transitioning from down to up. Applying power pref (on).
    Wed Oct 21 00:13:50 <configd[14]> psCallback: powerSource = AC Power
    Wed Oct 21 00:13:50 <configd[14]> psCallback: set powersave disabled on en1
    Wed Oct 21 00:13:50 <configd[14]> bsd_80211_eventcallback: LINK_CHANGED (en1)
    And a lot more power messages at 00:13:50
    Then "airport -I" said that "Airport: off" however the Network Utility said that Airport "Link Status: Active"
    And iStat Menu showed some bytes going Out, but none coming in.
    In my "All Messages" section of "Console.app" at the time of the breakdown I got these messages:
    10/20/09 11:59:59 PM Alarm Clock[838] Updating menu items at day change
    10/21/09 12:00:00 AM Alarm Clock[838] Updating menu items at day change
    10/21/09 12:13:32 AM Alarm Clock[838] kIOMessageSystemWillSleep
    10/21/09 12:13:33 AM [0x0-0xa00a].com.digitallity.alarmclock2[838] 2009-10-21 00:13:33.145 helper[975:903] Adding power event: 2009-10-21 05:00:00 -0700
    10/21/09 12:13:33 AM kernel hibernate image path: /var/vm/sleepimage
    10/21/09 12:13:33 AM kernel sizeof(IOHibernateImageHeader) == 512
    10/21/09 12:13:33 AM kernel Opened file /var/vm/sleepimage, size 4294967296, partition base 0xc805000, maxio 400000
    10/21/09 12:13:33 AM kernel hibernate image major 14, minor 2, blocksize 512, pollers 5
    10/21/09 12:13:33 AM kernel hibernateallocpages flags 00000000, gobbling 0 pages
    10/21/09 12:13:35 AM kernel NVEthernet::setLinkStatus - Valid but not Active
    10/21/09 12:13:35 AM kernel vmmon: powerStateDidChange flags=0x4 (state 2)
    10/21/09 12:13:35 AM kernel System SafeSleep
    10/21/09 12:13:50 AM kernel hibernatepage_listsetall start
    10/21/09 12:13:50 AM kernel hibernatepage_listsetall time: 169 ms
    10/21/09 12:13:50 AM kernel pages 401556, wire 83533, act 64662, inact 732, spec 65, zf 80, throt 0, could discard act 38740 inact 62254 purgeable 3092 spec 148398
    10/21/09 12:13:50 AM kernel hibernatepage_listsetall found pageCount 149072
    10/21/09 12:13:50 AM kernel IOHibernatePollerOpen, mlget_interruptsenabled 0
    10/21/09 12:13:50 AM kernel IOHibernatePollerOpen(0)
    10/21/09 12:13:50 AM kernel writing 147884 pages
    10/21/09 12:13:50 AM kernel image1Size 110966272
    10/21/09 12:13:50 AM kernel PMStats: Hibernate write took 5517 ms
    10/21/09 12:13:50 AM kernel all time: 5517 ms, comp time: 832 ms, deco time: 0 ms,
    10/21/09 12:13:50 AM kernel image 221455872, uncompressed 606031872 (147957), compressed 220188000 (36%), sum1 abeec56f, sum2 473ad370
    10/21/09 12:13:50 AM kernel hibernatewriteimage done(0)
    10/21/09 12:13:50 AM kernel sleep
    10/21/09 12:13:50 AM kernel Wake reason = EC LID0
    10/21/09 12:13:50 AM kernel System Wake
    10/21/09 12:13:50 AM kernel vmmon: powerStateDidChange flags=0x82 (state 4)
    10/21/09 12:13:50 AM kernel Previous Sleep Cause: 5
    10/21/09 12:13:50 AM kernel AirPort: Link Down on en1. Reason 4 (Disassociated due to inactivity).
    Etc...
    What's interesting is Alarm Clock is working fine doing its normal thing, and then it gets the system will sleep message. So it sets a power event like it normally does (and this works fine usually when I close the lid and Airport comes back up) but this time I didn't close the lid.
    Also the last message of 00:13:35 says "System SafeSleep" so the OS is obviously sleeping
    It says that "Wake reason = EC LID0", which sounds like it thinks the Lid (screen) was lifted. And it also says "Previous Sleep Cause: 5".
    I wonder what 5 means?
    Does anyone else with this issue get similar logs?

  • IPod 80gb turns of by itself and won't turn on, iPod 80gb turns off by itself and won't turn on

    My iPod is acting a little weird lately. It completely turns of all by itself and won't turn on back again. It turns on only when I connect it to the PC. I taught it was the problem with the battery but, it happens even when it is fully charged. I was watching some videos right after I had it fully charged and all of a sudden it turned off. I tried turning it on but, it didn't work and I connected to my PC, the apple logo showed up slowly and started working as usual. Please help me to sort this out.

    Try a hard reset the next time this happens to see if that helps.  To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    Otherwise, you may want to consider restoring your iPod via iTunes to rule out software corruption.
    B-rock

  • My ipod turned off by itself and won't turn back on!

    It was charged and nothing happened to it. I tried holding down the home button but that didnt work. Please Help!!

    - Try charging it for at least and hour and the resetting it:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next connect it to a computer. After charging it for at least an hour see if you can restore it via iTunes.  If iTunes does not see the iPod try placing the iPod in recovery mode.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    If it still doe not show in iTunes try placing it in DFU mode and restoring it.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Last, make an appointment at the Genius Bar of an Apple store.

  • I have only had my iphone for about 2 months, and i was talking on it and it just shut off. It has been charging all night, because i thought it was dead. But, it still won't turn on and i have tried pressing the lock button. Help please!

    I really want to know what I should do. I don't have insurance on my phone, am I still under warranty?

    You should still be under warranty.  First try rebooting the iPhone by pressing and holding both the Home and Sleep buttons at the same time until the Apple symbol appears, ignoring the power off slider.  You should get indications of life within about 10 seconds while holding the buttons.

Maybe you are looking for

  • Capture refernce PO number in BADI ME_GUI_PO_CUST

    Hello all, I am workinmng on purchase order screen enhancement Using BADI ME_GUI_PO_CUST new custom fields are implemented and it is working fine. when i create new PO using reference PO ( dragging from document overview), need ot capture the referen

  • Quickly reconnecting large numbers of photos in PSE 6 and 7

    [This is a significant revision of my message posted here on 2/8/2008 and in the Photoshop Elements 6.0 FAQ forum on 2/9/2008. It is split across two messages.] Part I of II When you move photos from one location to another using Windows Explorer or

  • PS cs5 x64 install shows in info as x32

    After installing photoshop cs5x64 on my win 7 64 bit laptop when the check the help about it says versiion 12.0.1 x32. Does this mean the 32 bit version is installed? When I go to update it says it is updating photoshop 64. ahhhh Im confused.... Than

  • Remove missing file warning

    I have some photos I want to edit - sequence, reject, sort etc - but not develop. The full catalog is on my desktop at the studio. I'm travelling right now with my laptop and have exported a catalog with those images to work on. Of course, when I ope

  • Transformation in matching mode in data manager

    Hi , Can anyone tell me when should we do trasformation in data manager (matching mode)? How can we do it? Can any one provide me example? Thanks