My phone keeps failing to read the Micro SD card

Hi, I own a Nokia N82. I took the card out to transfer some data from my computer to my phone. But when I put it back and I went to 'memory card', it said 'No memory card inserted' and all my files that were in the memo card have been lost. I need help please.... Thanks!
Message Edited by Starlight42 on 08-Jan-2010 08:18 PM

Thanks again for your support, really appreciate this! I send you two other pictures with the details I have found. Instead of exFat the info shows MS-DOS (FAT). However, if I change the volume into 16 partitions than the structure changes into MAC-OS Extended (Journaled). Is this perhaps the key to the solution?!
And yes this card is being used for three computers totally: one Mac, Macbook Air and Pro and a camera as well. This goes for all our SD-cards which we use by the way.

Similar Messages

  • Stream 7 not reading the micro SD card

    Hello,
    I've just inserted a micro SD card and my Strem 7 won't read it. I restarted the device, and still the same thing..
    Help!

    Size isnt the issue. I have a 128gb micro sd and it is working fine.
    most likely it is a formatting issue or a bad card.

  • My phone keeps dropping calls.  The phone reads call failed!

    my phone keeps dropping calls.  The phone reads call failed!  (as this is how I find out where I am working each day.  I am losing money Help!)

    Settings > General > Reset > Reset Network Settings
    If the issue persists, contact the carrier.

  • I can not open Firefox. Keep getting the error message "Failed to read the configuration file. Please contact your system administrator." What do I do?

    I can not open Firefox. I keep getting the message "Failed to read the configuration file. Please contact your system administrator." I have tried uninstalling Firefox and then reinstalling it but without success. What should I do?

    Which Fx version? When you uninstalled Fx, did you <b>reboot</b> computer before reinstall?
    Also, check for / delete any leftover files in the Fx programs install folders, before reinstall?
    Is your profile in the default location or custom location?
    Have you tried creating a <u>new, <b>completely</b> clean profile</u> - to test (then make sure to select that profile to start Fx - from the Profile Manager)? (no addons or plugins installed).
    Does the user acct (that Fx fails under) have access ("rights") to all locations - especially for Fx profiles location?

  • I have installed Firefox but I keep getting the following message, "Failed to read the configuration file."

    Firefox has stopped working. I have uninstalled it and reinstalled it and it still will not work. It tells me that it installed successfully but when I launch it I get a window that says, "Failed to read the configuration file." and it will not open. Please help.

    Do a clean reinstall.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/Profile_backup

  • TS2755 Hi All - I sent a text using my iphone 5 - It is PAYG and had no money in it. It tried to send as an SMS but gave the 'green button reject message'. After deleting the convo, the phone keeps trying to send the deleted text via SMS and wont stop not

    Hi All - I sent an sms using my iphone 5 - It is PAYG and had no money in it. (stupidly)
    It tried to send as an SMS but gave the 'green button reject message'.(no money)
    Step 2 in this stupidity - the phone keeps trying to send the deleted text via SMS and wont stop notifying me of this. Totally ruining the functionallity of my phone, and more so totally annoying. All I want to do is stop the constant re-trying of sending the deleted SMS.
    Any ideas?
    Many Thanks!

    Hi, many thanks for your help - Pressing and holding sleep/reset hasn't worked, the msg is still continually reporting it is failing to send. I can restore to a previous version however I'll lose my paid apps. Is there any way to work around this. I'm only concerned about one app - Epocam HD which I purchased last month. My last backup on PC is 4 March 13 - before I bought the paid app - Itunes advises me I'll have to re-pay to get my apps (app) back. Even though it advises that icloud backed up this morning at 1:30 am (which although it is before the text, I cannot manually select this restore).
    What a mess!

  • HT1420 I have set up iTunes Match on only 3 devices (my Windows 7 desktop and 2 iPhones) and am now trying to authorise my new Windows 8 (Toshiba) laptop but I keep failing to authorise the laptop using my one-and-only Apple ID. Does anyone have advice to

    I have set up iTunes Match on only 3 devices (my Windows 7 desktop and 2 iPhones) and am now trying to authorise my new Windows 8 (Toshiba) laptop but I keep failing to authorise the laptop using my one-and-only Apple ID. Does anyone have advice to solve this problem?!

    Hi all.  I can’t tell you how to solve your iCloud 3.x issues.  Heck, I don’t think they’re even solvable.
    But if you had a previous version of iCloud that was working correctly then I can definitely tell you how to solve the “iCloud Photo Stream is not syncing correctly to my Windows 7 PC” problem.  …without even a re-boot.
    Log out of iCloud 3.0 and uninstall it.
    Open My Computer and then open your C:\ drive.  Go to Tools/Folder Options and click on the View tab.  Select the “Show hidden…” radio button and click on OK.
    Open the Users folder.
    Open your user folder
    Open ProgramData (previously hidden folder)
    Open the Apple folder – not the Apple Computer folder.
    Open the Installer Cache folder
    In Details view sort on Name
    Open the folder for the newest entry for iCloud Control Panel 2.x – probably 2.1.2.8 dated 4/25/2013
    Right click on iCloud64.msi and select Install.
    When finished, the synching between iCloud and your PC will be back to working perfectly as before the 3.0 fiasco.  The pictures will be synched to the same Photostream folder as before the “upgrade”.  Now all you need to do is wait until Apple/Microsoft get this thing fixed and working before you try the 3.x upgrade again.
    I think the iCloud 3.0 software was written by the same folks who wrote healthcare.gov with the main difference being that healthcare.gov might eventually be made to work.
    For those of you who hate to go backwards, think of it as attacking to the rear.  Which would you rather have, the frustration of no synching or everything working on an older version?
    Good luck…

  • My phone keeps on looping with the apple logo after the blue screen.

    I tried to up date my iPhone 5s thru iTunes and got error statin iTunes has detected an iPhone in recovery mode. you must restore  this iPhone before it can be used with iTunes. Saw a video on you tube to use rec boot. So I downloaded rec boot v1.3 to try and kick it out of recovery mode and my phone keeps on looping with the white screen and black apple logo after the blue screen. I tried kicking it out with tiny umbrella and nothing happens. I was able to put the phone back in recovery mode and try using tiny umbrella while still connect to iTunes and hit exit recovery mode. under log tab it says sending exit recovery request to model # of the phone and nothing happen. My last option is to restore to factory settings which I don't want to do cause I would loose every thing. Can some one tell me I'm doing wrong or how to fix it. I would be greatly appreciate it the help. Thanks in advance. 

    Its looping because the iOS is not bootable which is why the iPhone booted to the ROM recovery mode.  Try using iTunes 12's 'Update' option when the iPhone is in recovery mode.

  • I never setup an iCloud ID and password. However, my phone keeps asking me for the passoword.

    I never setup an iCloud ID and password. However, my phone keeps asking me for the password. Can anybody help me get past the requirement?

    Sounds like someone else used the phone.  You won't be able to use that phone until and unless the previous owner either gives you the passcode, or removes that device from Find my Phone from their iCloud account.

  • What does this Adobe Muse error message mean: MuseJSAssert: Error calling slector function:SecurityError: Failed to read the 'contentDocument' property from 'HTMLIFrameElement': Blocked a frame with orign "null" from accessing a cross-origin frame.

    So what is up with this error message in Muse?
    MuseJSAssert: Error calling slector function:SecurityError: Failed to read the ‘contentDocument’ property from ‘HTMLIFrameElement’: Blocked a frame with orign “null” from accessing a cross-origin frame.

    This is a genuine security error generated by the browser when viewing a page with iFrame content locally.
    Please refer to Zak's reply in the following thread: https://forums.adobe.com/message/6496180#6496180
    Cheers,
    Vikas

  • Failed to read the configuration file. Fresh install on windows 7

    I have just downloaded and installed firefox on my windows 7 computer. No errors on the install. When I try to launch Firefox I get this dialog box. Configuration Error - Failed to read the configuration file. Please contact your system
    administrator.

    Check for the presence of a mozilla.cfg file in the Firefox program folder to initialize some prefs.
    This also involves the presence of a .js (JScript) file, probably in "defaults\pref" folder, that specifies to process this mozilla.cfg file.
    If you have .js files apart from the channel-prefs.js file, that sets app.update.channel, in the defaults\pref folder then open this file in an editor like Notepad and please post its content.
    Also please post the content of the mozilla.cfg file.
    There shouldn't be a mozilla.fcg file present unless you've created it yourself to initialize some prefs.
    If you have this mozilla.cfg file then best is to do a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
    *http://kb.mozillazine.org/Preferences_not_saved#Other_solutions

  • Failed to read the table scslmthresh: error = 113

    I'm continously getting the above error (Failed to read the table scslmthresh: error = 113) on a new sun cluster 3.2 on two T5240s with a 2540 as their storage. I've searched for this error but I cannot find any information on it. Anyone know what this is??
    java[1935]: [ID 513556 daemon.warning] Failed to read the table scslmthresh: error = 113
    I do have the cluster telemetry services running and a few storage resources, but nothing big yet. This error happens about every 2 hours, but the timing is not exaclty consistent.
    thanks for any insight.

    I figured out that this error definitely has to do with reading/writing information to the telemetry resource/data service, so I removed mine completely and re-installed it using the clsetup (option 8, then option 2). That seems to have removed the error. I'm guessing a Java patch changed something that the telemetry service didn't like.

  • DLL is failing to read the text file on RTOS

    I have created a DLL using Fortran Microsoft Power STation 4.0.  The DLL reads data from text files.  A vi is created to call this dll.  This vi is working fine in winodows.  It is reading from the text files and manipulates.
    When this vi is donwloaded to RTOS Labview 7.1, it fails to read the file and the RT reboots.  The error message is "file not found (filename)".  The file is present is the current directory of DLL.
    Please assist me in solving this problem.  My email Id is: [email protected] or [email protected]

    Hello GTRE,
    It seems like something isn't letting you access that DLL.  Do you have the DLL moved onto the RT target?  What is your real-time target?  Does the DLL require access to other resources?  What specifically does the error message say?  Does it contain an error code?
    Answering these questions will allow us to narrow down the problem - thanks!
    Janell R | Applications Engineer

  • HT201401 I am using iphone 3s after updating my phone it is not reading the sim i tried with different sim's but none worked can you please help me

    I am using iphone 3s after updating my phone it is not reading the sim i tried with different sim's but none worked can you please help me

    There is no iPhone 3s.
    What is displaying on the device?
    Has the device ever been hacked or jailbroken?

  • Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.

    Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.
    I REINSTALL 10 TIMES SO DON'T TELL ME THAT!!!
    I'm piss because i need firefox working again so i can finish reseaching my speech in 5 days.

    Which files do you have in the defaults\pref folder in the Firefox program folder?
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    See also "Other solutions":
    *http://kb.mozillazine.org/Preferences_not_saved
    Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 22.0: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Maybe you are looking for

  • Transport

    Hi All, I have completed of creating objects and testing in development for a project. I have created infoobjects, infosources, ods's and cubes and now i have to send them to quality system. i have a task before sending them.It is to organize the obj

  • IMPORT FROM DATABASE doesn't work in Web Dynpro

    Hi all, I want to use the code at the bottom to get the last packages visited by a user I specify. But I'm getting this error: IMPORT var_1 ... var_N FROM DATABASE is not supported in the OO context. Use IMPORT name_1 TO var_1 ... name_n TO var_n FRO

  • Mass Delete Purchasing Info Records

    Is there a way to flag a standard info record EINA-LOEKZ in mass maintenance MEMASSIN for several materials across several different vendors? I can select EINA-LOEKZ in MEMASSIN then choose selection fields and pull down the material and vendor.  But

  • PO partners is blocked from purchasing but PO is created successfully

    Dear SAP, We have VN(Vendor), PI(Invoice Presented by) or OA(Ordering address) partners in PO. If VN is blocked from purchasing, system will generate error message (Vendor is Blocked) and stop user from creating the PO. However, if PI and or OA is bl

  • Web Service Proxy Generation from tModel

    Hello,    I have created a Business (Web) Service in the UDDI supplied with the NW04s Java Stack SP06, under a new Business Entity. I have also created multiple tModels each corresponding to unique Web Service Descriptions (WSDs) of the same Web Serv