My phone keeps flashing up with 'this device is not accessorised for this i phone and its not plugged into anything, can anyone help?
my iphone 4 keeps flashing up with 'this device is not accessorised for this iphone' and its not plugged into anything, can anyone help?
The most common reason for this message is, the iPhone dock port needs to be cleaned, use a clean dry tooth brush. See if this helps. If you keep getting the message, then clean the dock port again very carefully with isopropyll alcohol, expecially the pins which are on top of the dock mid rib. If still problems make appointment with Apple Genius.
Similar Messages
-
Need help with this book problem...Pig game...can ANYONE help!??
I need help with the following book problem...could someone write this code for me?? Thanks!!
First design and implement a class called PairOfDice, composed of two six-sided Die objects. Using the PairOfDice class, design and implement a class to play a game called Pig. In this game, the user competes against the computer. On each turn, the current player rolls a pair of dice and accumulates points. The goal is to reach 100 points before your opponent does. If, on any turn, the player rolls a 1, all points accumulated for that round are forfeited and control of the dice moves to the other player. If the player rolls two 1s in one turn, the player loses all points accumulated thus far in the game and loses control of the dice. The player may voluntarily turn over the dice after each roll. Therefore the player must decide to either roll again (be a pig) and risk losing points, or relinquish control of the dice, possibly allowing the other player to win. Implement the computer player such that it always relinquishes the dice after accumulating 20 or more points in any given round.
I realize this is a long code, so it would be greatly appreciated to anyone who writes this one for me, or can at least give me any parts of it. I honestly have no clue how to do this because our professor is a dumbass and just expects us to know how to do this...he doesn't teach us this stuff...don't ask. Anyways, thanks for taking the time to read this and I hope someone helps out!! Thank you in advance to anyone who does!!!Nasty comments? It's not a matter of not liking you, it's a matter of responding to the
"I'ts everyone else's fault but mine" attitude of your post.
If you are genuine, the program is very easy to write, so, your Professor is correct when he said you should
be able to do it. I'm still very much in the beginner category at java, and it took me only 20 mins to write
(+5 mins to design it on paper). 2 classes in one file < 100 lines. Most of the regulars here would do it in half the time / half the lines.
All of the clues are in the description, break them down into their various if / else conditions. Write it down on paper.
Have a go. Try to achieve something. Post what you've tried, no-one will laugh at you, and you will be
pleasanty surprised at the level of help you will get when you've "obviously" made some effort.
Again, have a go. If you don't like problem-solving, then you don't like programming. So, you gotta ask
yourself - "what am I doin' here?" -
I am having major problems with my track pad on my macbook pro. Even though my settings haven't changed...my trackpad is no longer responding as it did before. The left hand corner no longer clicks when I press it and my personal commands which I set up in preferences no longer seem to be workin. Please help!
Some websites have an internal mute or volume setting. If that's not the issue, see below.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
▹ System Preferences… ▹ Flash Player ▹ Advanced ▹ Delete All...
In the sheet that opens, check the box marked
Delete All Site Data and Settings
then click Delete Data. Close the preference pane. -
I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing". Can anyone help with this?
It keeps telling me to reinstall iTunes, but it continues to come back with the same error message.
-
I have iOS 7. When I go to the itunes store on my ipod touch it gives me a blank screen with nothing on it. I restarted my ipod touch and it didn't work. Can someone help me with this?
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>iTunes and App stores and sign out and sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Want to install Skydrive on my mac, but the app store wants US billing information and I am in Gibraltar. Can anyone help me with this?
Yes, if this is a permanent change. But you still have to have all the other changes - billing address, credit card, residence, etc. See Manage My Apple ID.
If you can't remember answers to security questions:
The Three Best Alternatives for Security Questions and Rescue Mail
1. Use Apple's Express Lane.
Go to https://expresslane.apple.com ; click 'See all products and services' at the
bottom of the page. In the next page click 'More Products and Services, then
'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
ID security questions' and click 'Continue'. Please be patient waiting for the return
phone call. It will come in time depending on how heavily the servers are being hit.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID. -
When I power up my Mac-Pro I only get a flashing file folder with a ? inside the folder. I suspect my hard drive is maxed to capacity can anyone help me as to what I should do?
Whatever the problem is you no longer have a bootable system. You need to try reinstalling OS X.
Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
I'm looking for a good note app with pen function for taking notes ( in English and German ) during business trips. Can anyone help?
Really sorry to hear about this, particularly when you're putting your life on the line. But Apple cannot track your iPhone in any way unless you had set up Find My iPhone prior to it being lifted.
It's possible that AT&T might be able to do something, but it's probably that they cannot track it, or will not without a request from an authorized law enforcement agency, but rather would only disable the device. You'll have to try and find a way to contact AT&T directly and ask if they can do anything to help you; the chances of any AT&T employee in a position to help you spotting this thread it pretty small.
Good luck, stay safe, and come home soon.
Regards. -
I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed it but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?
Please take each of the following steps that you haven't already tried. Test after each one. Back up all data before making any changes.
1. Make sure that the right volume is selected in the Startup Disk preference pane.
2. Disconnect all wired peripherals except those needed to start up. If there's no change, reconnect them
3. Reset the System Management Controller.
4. Reset the PRAM.
5. Start up in safe mode, then restart as usual. If you can't start in safe mode—for instance, if FileVault is active—then triple-click anywhere in the line below on this page to select it:
/var/folders
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with an item named "folders" selected. Move the selected item to the Trash. You'll be prompted for your administrator password. Restart and empty the Trash. -
Every time I start my PC it says Procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll It also keeps freezing on Itunes and I cannot sync. Please can anyone help?
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
i keep trying to restore my iphone 3G but a error keeps poping up . its called "unknown error 1015" can anyone help?? i just got the iphone.
More Like This
upgrade and restore error
Does anyone know how to fix "error code 1015" ?
What is the cause of "error 1015" when trying to restore and update an iPhone 3gs?
unknown error 1015?
how can I fix my iphone with error (1015)
you can find this on the right side of this page, many people have had this problem and there is no reason to repost this becuase you can find an answer by just searching for it. -
I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?
The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check. -
Hello. I have an iPad2, and iMovie software. My main problem, for the moment, is the length of the videos: I can´t create a video with more than 56 seconds. When I try, the app shuts off... Can anyone help me?
Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
Take it to whoever replaced the screen and see if they can help you.
iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked. -
Cannot download new U2 album. Says purchased on my account but no evidence anywhere and I definitely did not purchase it. Can anyone help with what is going on?
It was given free to everyone on tuesday as part of the iPhone 5 event/announcement, so it will show as purchased in the store.
If this is on your iPhone then either turn Settings > iTunes & App Store > Music (under 'show all') 'on' - it should then show in the Music app with a cloud icon against it for downloading.
Or go to the Purchased tab in the iTunes store app, select Music, and it might then show under 'Various' - when downloaded it should correctly be under U2 in Music.
If you are using your computer's iTunes then you should be able to download it into your library by ticking the 'show iTunes in the Cloud purchases' tick box on the Store tab in Edit > Preferences (iTunes > Preferences on a Mac) - it should then show in the Music part of your library with a cloud icon against it for downloading (downloading the booklet for it this way may not work, you may get a 'corrupt file' message when trying to open it).
Or go to the Purchased link under Quick Links on the right-hand side of the iTunes store homepage and you should be able to download it from there.
A third option on a computer is to sign out of your account (Store > Sign Out menu option), find the album in the store and then click on its free 'price' button - you should then be prompted to sign back in and the album should download. -
I am using ipad mini ... I was unable to access facebook since long time... Its shows error could not communicate with the server.... I had install it but result was same. Can anyone help me???
first off , from the wired computer access the router using http://192.168.1.1 .. check the firmware version .. go to www.linksys.com/download and check the latest firmware available...if the router does not have the latest firmware , upgrade it first. .. after the firmware upgrade , reset and reconfigure the router
if the router has the latest firmware , then reset the router for 30 seconds .. do a power cycle...access the router ui ..default password is admin..click on the "mac add clone" subtab , enable it and click clone....save the settings and do a power cycle..ensure that the wired computer is online
on the router web ui , click on the wireless tab ..change the ssid - any non-linksys name , channel - 11 , security mode - wpa , beacon interval - 50 , fragmentation threshold - 2306 , RTS threshold - 2307 ..
let me know if this helps you..
Maybe you are looking for
-
Interactive Report Column Formating '%' symbol
Hi, I have an intercative report that shows a column displaying a number and and the sysmbol %. The source query is similar to: SELECT my_number||'%' as display_percentile FROM dual; Because of this the interactive report will only show this column a
-
Calendar events do not appear in List view
My events do not show up in List view, but are there in the Day and Month view. What could be causing this problem? (I used to be able to see all my events in List view.)
-
Policy Agent 2.0 redirect after auth
Versions: Solaris 8 Identity Server 6.0 Policy Agent 2.0 Web Server: iWS 6.0 We are having a problem with redirecting users to a specific page after authentication. Here is our scenario: When a user tries to access a URL on our WS with the Policy Age
-
hi guys, Do you use any tools to handle your coldfusion application testing? if yes, what do you use? I'm trying to find something that i can for testing that will not involve the developer team
-
QR Code - Two dimensional barcodes - in XML reports
Hi All, I have a requirment to generate QR Code for some given values in my xml report (with RTF template) I needs the qr code font file(.ttf) and Java encoder classes and java file ( As these are advanced fonts these need encoders to encode the give