My phone keeps showing the hot temperature message every 1o minutes. What should i do?

y phone keeps showing the hot temperature message every 1o minutes. What should i do?

does the phone feel hot? Are you using ANY kind of phone case ?
If NO to the above and you think it might just be a weird error, you can try resetting the device by pressing the top power button and the home button at the same time until you see an apple appear then let go. your phone will restart.
If it keeps giving you the same error after that, call Applecare.

Similar Messages

  • I have tried downloading ios7 but my phone keeps showing the usb sign and i tunes sign

    i have tried downloading ios7 but my phone keeps showing the usb sign and i tunes sign

    That is almost always because the phone was hacked to unlock it from the original carrier.

  • My iCloud is not syncing between my mac and my iPhone and shows the following error message CoreDAVHTTPStatusErrorDomain error 501. what does this mean?!

    I have recently upgraded to an iphone 5S 4G and also updated my mac with the latest software so that i can use the icloud to back up all my stuff. It doesn't seem to be working with my contacts at all and recently added ones are disappearing, old ones are duplicating etc. The contacts icloud has the following error message CoreDAVHTTPStatusErrorDomain error 501. and I have no idea what it means. Can anyone help?

    I had this problem before. I like to disable extra services to speed up my computer and I disabled the Apple Mobile Device service and had to re-enable this.
    You can do that by going Control Panel>Administrative Tools>Services. Once you have gone to the services window, look for Apple Mobile Device and right-click. Select "Properties". There should be some information about the service as well as the label "Startup Type" with a drop-down menu beside it. If it says "disabled", that is your problem; Change the selection to anything except disabled (Automatic is easier and ensures that you can sync as soon as itunes opens).
    If this doesn't work, I would look into your anti-virus' settings. Good Luck!

  • Mac mini keeps displaying shut down message every 10 minutes help?

    My mac mini 320 gb machine with the cd drive in it from the 2010 model keeps displaying the shut down message every time minutes and I don't have enough time to check everything and i need some help. Thanks

    Here is a link to a system preference you can check.http://support.apple.com/kb/PH4014?viewlocale=en_US
    It is a security feature.
    You did not mention it but are you using a movie player other than the provide DVD player or iTunes.  For example VLC.  If you are, for some reason OS X does not know what is going on, i.e. watching a movie, so it thinks you left.  So, after 10mins it trys to log off.  The annoying part is that it will not do a force log off if there are programs running.  Well atleast it is annoying to me.
    Good Luck,
    C.

  • Why does my iPhone keep showing the Apple logo, dimming, then showing the logo again?

    Trying to update to iOS 8 and the phone keeps showing the Apple logo, then dimming after a number of minutes then showing it again.

    Hello cgb1508,
    Thanks for using Apple Support Communities.
    From your post I understand that your iPhone will not boot past the Apple logo.  To troubleshoot this issue please follow the steps in the support article below.
    iOS: Not responding or does not turn on
    Take care,
    Alex H.

  • I keep getting download error and it does not want to download.  I tried deleting anything that might have creative suite links and reloading but I keep getting the same error message.

    I keep getting download error and it does not want to download.  I tried deleting anything that might have creative suite links and reloading but I keep getting the same error message.

    Well... what IS the error message?
    Please read https://forums.adobe.com/thread/1499014
    -try some steps such as changing browsers and turning off your firewall
    -also flush your browser cache so you are starting with a fresh browser
    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
    http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • I interrupted my iphone upgrade to ioS 6 and now my phone just keeps showing the apple. it wont restart or show up when I plug it into itunes!!!!

    Help! i accidently interrupted my iphone upgrade to ioS 6 and now my phone wont turn on completely. it just keeps showing the apple. it also wont register with itunes...i have tried turning it off and restarting it multiple times but nothing is working. HELP!

    hey man, i feel your pain... here's my story and i'm pretty sure this will work for you... on the 19th of september i went to upgrade ios 6 and paused it about 1/10 through... when i plugged my phone up at night the screen was at the normal lock screen.. when i woke up at 10:30 am i went to check my phone and the screen appeared as an apple logo with a progression bar about 6/10 full.. it didn't seem to be progressing any more, but i guess that was only because it was so slow trying to download over wifi because it had all night to finish downloading.. anyways i needed to check my texts and the time so i held down the lock button and the phone turned off during the download.. when i tried to turn it on the apple logo would appear like normal trying to boot up.. then it would fade away and cut off.. then seconds later try to turn on again, by itself, repeatedly for hours on september 20. i tried restarting it (holding lock and home button down 10-15 seconds) but the problem with that is that the phone was already trying to turn on itself so it never would restart correctly... (continued turning on and off by itself).. i went to verizon and they said my phone is screwed.. go to apple if you wanna pay.. i called apple support and a lady helped me out here's the solution that worked after hours of thinking my phone is totally screwed.. when the phone is dark and cut off.. press and hold the home button before you plugin your sync cable to your usb port.. (have itunes up and ready) continue holding the home button and plugin the sync cable.. still holding the button, wait for a message from itunes appear that says it recognizes your device in recovery mode.. press ok.. the screen on your iphone should be a snyc cable and and arrow pointing to an itunes symbol... from there it is pretty self explanatory.. you will need to restore and update your phone from there which should be an option after you press ok... it takes awhile.. your phone will then go through one, or maybe a few progression bars (it may vary, not sure).. while your itunes will be restoring software & firmware.. when everything is done on itunes and your phone.. your phone should boot right up!!! reply if you have any more questions.. i'm so glad i resolved my issue today.. good luck!

  • HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

    after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
    Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
    The SIM works on a different phone I tested it.
    Any ideas?? TKS Sandro

    “Could Not Activate EDGE” error message Update ...
    Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
    After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
    AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
    When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
    I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
    By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
    Thanks
    Joe

  • TS3694 I tried to get rid of my jailbreak things like restoring my whole phone. It didn't work. Now it keeps showing the photo to connect to itunes so I did. It said to restore so I did. and it keeps doing the same thing over and over and over and over ag

    I tried to get rid of my jailbreak things like restoring my whole phone. It didn't work. Now it keeps showing the photo to connect to itunes so I did. It said to restore so I did. and it keeps doing the same thing over and over and over and over again. How do I fix it?

    Your phone is toast.  Contrary to what the lovely folks in the jalibreaking community say, attempting to restore the iPhone to "factory" condition does not always remove the jailbreak.  You'll need to contact those bozos and see if they can help you.
    Hint:  start saving for a new phone.

  • My phone has been set up previously for itunes on my lap top but my phone now shows the connect to itunes message even though the phone is connected....Ive tried every thing I can think of ...now I cant use my phone ..please help ?

    My phone has been set up previously for itunes on my lap top but my phone now shows the connect to itunes message even though the phone is connected....Ive tried every thing I can think of ...now I cant use my phone ..please help ?

    Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.
    Unfortunately, the data on your phone is already gone if you're seeing the connect to iTunes logo.

  • My phone keep blinking the screen and the unlocked...

    hi everyone,
    my phone keeps blinking the screen and locked the phone automatically. I tried to use unlocked key to unlock it, but it seems like doen't work.  I happened this after updated the new firmware (v30 one) . during the update process, it didn't come out any failure message. however, when it got into the restart process , the phone starts the problem.  
    plz help!!!!!
    I removed the battery , sim card, and memory card already,
    Attachments:
    10000541493262.gif ‏804 KB

    try code number 2, make sure you back up all your data and stuff, read carefully if this does not work the only option for you is to take it to nokia care to have them have a look. 
     1. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
    Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for ALL operations listed here is 12345
    2. *#7370# - Reformat your phone (out of the box, tho keep in mind that most newer nokia phones at least n series, e series and s60 based phones have udp - user data preservation so not ALL data may be lost. still it is a good idea to always do a back up of your stuff.)
    3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
    hard reset - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons ( for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. )
    If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance. 
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • In Mail, one mailbox for Recovered Message (AOL) keeps showing 1 very large message that I cannot delete. How can I get rid of this recurring problem, please?

    In Mail on iMac, successfully running OS X Lion, one mailbox on My Mac for "Recovered Messages (from AOL)" keeps showing 1 very large message (more than 20 Mb) that I just cannot seem to delete. Each time I go into my In Box, the "loading" symbol spins and the message appears in the "Recovered Messages" mailbox. How can I get rid of this recurrent file, please?
    At the same time, I'm not receviving any new mails in my In Box, although, if I look at the same account on my MacBook Pro, I can indeed see the incoming mails (but on that machine I do not have the "recovery" problem).
    The help of a clear-thinking Apple fan would be greatly appreciated.
    Many thanks.
    From Ian in Paris, France

    Ian
    I worked it out.
    Unhide your hidden files ( I used a widget from http://www.apple.com/downloads/dashboard/developer/hiddenfiles.html)
    Go to your HD.
    Go to Users.
    Go to your House (home)
    there should be a hidden Library folder there (it will be transparent)
    Go to Mail in this folder
    The next folder ( for me ) is V2
    Click on that and the next one will be a whole list of your mail servers, and one folder called Mailboxes
    Click on that and there should be a folder called recovered messages (server) . mbox
    Click on that there a random numbered/lettered folder -> data
    In that data folder is a list of random numbered folders (i.e a folder called 2, one called 9 etc) and in EACH of these, another numbered folder, and then a folder called messages.
    In the messages folder delete all of the ebmx (I think that's what they were from memory, sorry I forgot as I already deleted my trash after my golden moment).
    This was GOLDEN for me. Reason being, when I went to delete my "recovered file" in mail, it would give me an error message " cannot delete 2500 files". I knew it was only 1 file so this was weird. Why 2500 files? Because if you click on the ebmx files like I did, hey presto, it turned out that they were ALL THE SAME MESSAGE = 2500 times. In each of those folders in the random numbers, in their related message folder.
    Now remember - DONT delete the folder, make sure you have gone to the message folder, found all those pesky ebmx files and deleted THOSE, not the folder.
    It worked for me. No restarting or anything. And recovered file. GONE.
    Started receiving and syncing mail again. Woohoo.
    Best wishes.

  • I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected.  Contact your support personnel or package vendor."

    I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected.  Contact your support personnel or package vendor."

    Yes, I had found a similar solution also.  I'm running XP Pro, SP3.  I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair.  Then run the 10.5 exe.
    While the programme updated from version 8 of iTunes, my new iTunes is now a mess.  Not all of my music was in the same folder previously but it all showed up on iTunes.  Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing.  I haven't begun to work on that.

  • I have been unable to download the iphone software v5.1.  I keep getting the timing out message.  Is there someway to set my network connections to allow the download?  Can I get the update some other way?

    I have been unable to download the iphone software v5.1.  I keep getting the timing out message.  Is there someway to set my network connections to allow the download?  Can I get the update some other way?

    The Huntress is correct, I have missed that you have an iPhone 3G
    Usually iTunes will tell you in that case, that iOS 4.2.1 the newest version for your phone.
    If you don't have an iPhone 3G, network connections timing out can be a security software problem:
    iTunes for Windows: Troubleshooting security software issues

  • My iPhone 6 keep showing the blank white screen

    Today my phone is totally out of battery, when I charge it, it turns on like five mins later after I connect to the cable, and it shows the blank white board and at the bottom it says "slide to upgrage" then it seems upgrading but later it turns blank grey and keep grey in 5 mins later it start over again and shows slide to upgrade again, no many how many times I try it keeps showing the same steps like this, I cannot get into the homepage totally.
    what can I do to solve it?

    Take it in to the local Apple Store and get it serviced.

Maybe you are looking for

  • Error while loading data from R3 to BW

    Hi, After mapping my DataSource created in R/3 system to my Infosource, I was taken to the maintenance screen of the transfer structure. I proposed the transfer rules. But my traffic signal of my transfer rule is not turning green. If I continue to a

  • Help with SecureSocket connections..

    I'm writing an Air app and debugging it in FlashCS5.5.. I'm using https://paypal.com just as a sample, but it's returning an invalid cert? What's going wrong here? public function mySecureSocket() { _paymentSocket = new SecureSocket(); _hostName = "h

  • I can't open my document on Page 09 (too old !), so what ?

    I can't open my documents on Page 09 (too old !), so what ? I just buy a new imac and grrrrr

  • Mark and unmark every line of the list in alv

    Hi experts please help me for the following requirement. The report must issue a list with the following fields: u2022     Sold-to (VBPA-KUNNR u2013 VBPA-PARVW = u2018AGu2019) u2022     Name of sold-to (VBPA- ADRNR u2013 VBPA-PARVW = u2018AGu2019  A

  • Supported LTE bands vs networks

    As you may have noticed, iPad Air 2 supports virtually all LTE bands, available on iPhone 6 and below - and yet, it does not support some LTE networks that work fine on iPhone 6, 5S and 5C (China Unicom being such); similar story with iPad Air (A1475