My phone only works on speaker

I cannot hear when someone calls or I make outgoing calls.  I can hear on speaker. I can hear on headphones.   I restored my iphone and that did not help. Any suggestions?

If you have Warranty or AppleCare Coverage take iPhone to Apple for resolution of this problem.

Similar Messages

  • My phone only works on speaker phone when trying to make calls, why?

    My phone only works to make a phone call when it is on speaker phone, any idea why?? The person on the other end can hear me but I cannot hear them unless it is on speaker..help
    I have an Iphone 4

    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    More info here  >  iPhone: Can't hear through the receiver or speakers

  • I have a Lucid by LG. The Phone only works on Speaker now. When someone call you can not here them until you turn on the speaker phone. How do I fix it.

    This is a new phone we just got from insurance replacement. It did work but now only works on speaker phone.

        Hi LuckyPhillips,
    That's not good! We want all parts of your device to work properly. Has there been any liquid or physical damage to the new phone? Have you tried powering the device off/on? Are you using a headset with the device?
    Thanks,
    PamelaF_VZW
    Tweet us @vzwsupport

  • Phone only works with speaker on

    my iphone5 only works with the speaker on. otherwise we cannot hear each other

    One thing i notice is that when i adjust the volume on the side of the phone the screen says that volume changes are being made for the ringer (headphones).
    So my phone thinks there are headphones connected when there aren't.
    How disappointing this update it starting out to be. People are calling and I can't talk to them without headphones or the speaker on.

  • My phone only works with speaker or headset

    When I answer my my i can not hear anyone.  It only works when I use the spealer or headset.  Whats the fix?

    WIth phone on and unlocked when you adjust the volume does it say Headset?  If so, it thinks the headset is still in.  Just plug in and out the headset repeadly for a bit until it realizes it is out (adjust volume with it in and out till it finally shows it is out when it really is out).

  • My mic for my iPhone 4S only works on speaker phone and doesn't work for Siri. What can I do?

    My mic on my 4s only works on speaker phone in calls. It also doesn't work for Siri or voice memos. Is there any way to fix this without having to buy new parts or exchange it?

    Hello there, mbrda92.
    The following Knowledge Base article provides some great, in-depth steps for troubleshooting your issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Particularly of note:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Phone calls only work on speaker phone, phone calls only work on speaker phone

    my phone calls are not working regularly they are only working on speaker phone

    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • I have problems with outgoing call no audio, only works with speaker. I bought my iphone on december 2011.

    I have problems with outgoing call no audio, only works with speaker. I bought my iphone on december 2011.

    Had the same problem, no audio on incoming or outgoing calls and only could hear the conversation of the call if I put on speaker. It seemed to start after I did a recent IOS update this past month. I tried restart, reset and restore of my iPhone but nothing changed. It appears not to be a software issue but a hardware problem. I got my phone this past summer so it was still under warranty and got it replaced.

  • People are unable to hear me when calling only works on speaker iPhone 4s AT

    I once made a called and my friend said that he was unable to hear me so I tested my iPhone by using voice memos and it couldnt find my voice, it only works on speaker.

    Bring your phone in for evaluation

  • Device not showing in iTunes for 'Wi-Fi Sync' and 'Sync Now' on phone only works(appears dark) when plugged in via USB so kinda defeats object. Any ideas please?

    Device not showing in iTunes for 'Wi-Fi Sync' and 'Sync Now' on phone only works(appears dark) when plugged in via USB so kinda defeats object. Any ideas please?

    Had the same issue. Tried everything that was posted for troubleshooting bye apple and on the discussions.
    Finally, tried something that solved it and it works flawlessly now. I changed my wireless router.
    I was using my ISP's supplied ZyXEL PN660 ADLS2+ with Wireless N. Swtiched to an older Linksys WRT160N and it is working beautifully now.
    Take a look at your router, make sure the firmware is up to date, and that UPnP is enabled, and if all is correct, and you have done everything else, try another Wireless router if you can.

  • HT201320 My ear phones only work on one ear for my iPod touch

    When I use my IPod do listen to music my ear phones only works on one ear

    - You have verified that the problem is the iPod and not the headphones, right?
    - Try inserting/removing the headphone plug a dozen times or so. Try cleaning out/blowing out the headphone jack.
    Try the following to rule out a software problem
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. Likely a bad headophone jack.
    - Apple will exchange your iPod for a refurbished for this price. They do not fix your iPod.
    Apple - Support - iPod - Repair pricing
    A third-party place like the following will replace the jack for less. Google for more places.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • NO CARRIER - Phone only works in 3G mode, and periodically loses signal

    Hi.
    Recently my iPhone 3GS has stopped working on the 2G network and has become somewhat unstable on the 3G.
    After traveling i found my phone rendered semi-defect.
    After a travel through 2 countries my phone stopped working on 2G network.
    to be able to connect to a "roaming" provider the phone had to be in 3G mode.
    the 2G mode is now not working at all.
    Once in a while the 3G also sets out, and i have to put the phone in flight mode and back to be able to get a connection to the carrier. (this could be caused by a non 3G zone i guess).
    I have done the following steps to try and resolve the issue.
    1) do a general network reset (no resolve)
    2) do a general phone reset (no resolve)
    3) do a iTunes restore, where the phone was updated, and blanked (no resolve)
    continue and restore the previous backup (no resolve)
    phone is running OS 3.1.3
    I have tried the SIM card in another phone, and the 2G works fine on the carrier side, so i dont find the SIM defective.
    somehow i thing the phone has totally flipped the 2G settings, and i dont know how to resolve it.
    anyone?
    Message was edited by: moosematic

    The internet isn't the problem. The phone really only works when I am in Wi-Fi. The data is the issue. Yes I have tried all of these resets, lost all of info on the phone and I am very fed up. This has been going on ever since the wonderful roll out of ios7. When I 1st did the upgrade it deactivated the phone, I had to go to the store, luckily they were able to fix that. Ever since then though the phone is worthless. My question at this point is more related to this being a phone issue or a Verizon issue. I live in 80207 (denver) and work in 80202 (downtown Denver). I would really just like to know if this is a network issue here, or if Apple just ruiend a perfectly good phone to get me to "upgrade."
    Is this a Verizon issue or Apple issue?

  • My phone only works on the charger..

    My Blackberry Curve only works when it is plugged in on the charger and if its not on a charger it will restart and not turn back on. Do I need a rew battery or what?

    It does everything its supposed to do sort of. But it wont let me make or recieve calls... there is no wifi connection or anything. The touch screen is still working somewhat but in some places its a little difficult. It works when it is plugged into the wall charger but when I plug it into the USB it only flashes the apple logo like I said. Thanks for replying!

  • Sound only works on speaker

    The sound on my iphone only works on speakerphone or headphones - other than that I can't hear callers (though they can hear me). Have tried turning it on and off but that doesn't help. Any ideas?

    It is a known hardware issue
    http://www.beijingiphonerepair.com/fix/diy-repair-iphone-4-people-cant-hear-me-i -cant-hear-other-people/

  • Ipnone 4 only works with speaker phone

    I receive calls but cannot hear the caller unless I use the speaker phone
    I have rebooted and just reinstalled the latest software and tried plugging and unplugging the headphone jack.
    Has anyone experienced this problem and found a fix?
    Phone is still under warranty but such a pain as it has to be sent away if its a hardware problem

    My fiance is having the same problem. We both got new iPhone 4's from Verizon less than 3 weeks ago. Now her speaker stopped working! She can only talk on speakerphone. Verizon is not allowed to try to fix or replace it and both Apple Stores are over 45 min away!!!!! Makes me happy my laptop is a PC. Appointment at Genius tomorrow. This is a huge inconvenience.

Maybe you are looking for

  • A paying customer who's fed up with your 'customer service'

    Let me see - I'm paying customer trying to renew a subscription that was a reduced rate (hence why I'm not doing it online) - and sometimes I actually want to speak to a human being for a sales transaction.  I'm also a customer who's purchased your p

  • Aren't some templates included in the CS4 Premier/Encore Package

    These templates would be used for the Flash output and other content produced in Encore.  I have none available to me in Encore.  Are they hidden or not available with the package? Thanks!

  • How to change username and password for already running mappings

    Hi Gurus, We have created so many mappings(more than 200) in owb 11g and deployed them into production and all are running without any issues. Now we are in big problem and the reason is our internal team is asking us to use the new user and password

  • Problem with ni9505

    When i use NI9505 to control step motor, use example code(closed loop), motor can run, but can not stop. for example, i want run  1000 steps, motor run and the encoder value may be a value close to 1000, but can not stop, why?

  • RowId In Form

    Hi, I have a multiple views some views can retrive the value of RowId and others can't Why? Regards, Edited by: kingadmin on Feb 5, 2011 6:23 AM Edited by: kingadmin on Feb 5, 2011 6:23 AM