My phone recognizes that the charger is plugged in, but will not charge.

I plug my phone in, using the usb cable and charger provided with the phone. The lightning bolt shows indicating is sees the ac charger, however, the battery screen shows "not Charging". I power cycle the phone and it still happens. I turn the phone off, and the battery indicator shows that it is plugged in, but the charge percentage never changes. Any assistance with this issue would be greatly appreciated!

Let's give you back the power to power your phone, kwtoman! Thanks to Ann154 for getting the conversation going! While it is always good to use the original charger, have you tested another approved charger? Did this start after installing a new app or update? How long have you had the device?
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

Similar Messages

I recently dug out my old 160gb iPod Classic. Every time I connect it to iTunes, the program freezes and/or crashes. My computer recognizes that the iPod is plugged in, (it's accesible under "My Computer") but iTunes doesn't acknowledge it, at all. Help?

I recently dug out my old 160gb iPod Classic. Every time I connect it to iTunes, the program freezes and/or crashes. My computer recognizes that the iPod is plugged in, (it's accesible under "My Computer") but iTunes doesn't acknowledge it, at all. I've tried every single solution I've seen, and none of them work. I know the Classic is outdated, but my other iPod doesn't have nearly as much room. Can anyone help with this?

See Corrupt iPod classic.
tt2

HT1688 Just bought a 5c and when I connected to our desktop it doesn't recognize that the iphone is plugged in. We have tried multiple usb ports and nothing.

Just bought a 5c and when I connected to our desktop it doesn't recognize that the iphone is plugged in. We have tried multiple usb ports and nothing.

Hello csmithhisler,
Congratulations on your new iPhone 5c! I am sure you are eager to get your new iPhone set up, but sounds like your iPhone is not appearing in iTunes. I recommend following the steps in this article to troubleshoot the issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M.

Im using an iMic to record but now it all of a sudden won't pick up anything played through it, yet if i turn on garageband it works. logic pro does acknowledge that the imic is plugged in but still won't pick up any sound, even with audio input : imic

Im using an iMic to record but now it all of a sudden won't pick up anything played through it, yet if i turn on garageband it works. logic pro does acknowledge that the imic is plugged in but still won't pick up any sound, even with audio input : imic and audio output : external speakers. is this just logic pro not working properly?

Same problem - happened after recent logic update.

I tried to restart my iPad due to problems with a Pinterest app that took up a lot of storage in the cache...now the apple logo comes up but will not start...it has recently been charged

I tried to restart my iPad due to problems with a Pinterest app that took up a lot of storage in the cache...now the apple logo comes up but will not start...it has recently been charged

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
 Cheers, Tom

I was updating my iphone 4s on my computer and there was an error and my phone has the connect to itunes symbol but will not connect to itunes on my computer. I am unable to use my phone and im not sure what to do..

I was updating my iphone 4s on my computer and there was an error and my phone has the connect to itunes symbol but will not connect to itunes on my computer. I am unable to use my phone and im not sure what to do..

See this support document for help. You may have to do this more than once. http://support.apple.com/kb/HT1808

My ipad has locked in the on position--shows icons but will not function or close down --can anyone help

My Ipad has locked in the on position --shows icons but will not function--cannot turn off either---battery is fully charged--can any one help please

Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet.

My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet. I tried to repair connection, tried to reboot modem several times, I even updated my computer. Nothing. All it says is that it does not detect modem. Why?

Welcome to the support community group.
First, are you sure that your AirPort Extreme has been configured correctly and is properly connected to your modem?
Begin by telling us how you have things connected and if the Airport Extreme is replacing a previously owned router or is this an entirely new installation?
First be sure that your modem is working and properly connects you to the internet using an ethernet cable directly connected to your laptop. Once you're sure that's working, reset the AirPort to factory defaults by disconnecting it from power and pressing and holding in the small reset button on the back for 15 - 20 seconds while you reconnect it to power. Then turn everything off for 5 minutes. Connect the Airport to your modem with and ethernet cable to the Airport WAN port on the back (check the user guide to make sure you connect the cable to the correct port) then connect a second ethernet cable between the laptop and one of the LAN ports on the AirPort Extreme.
Then power up the modem first, wait 5 minutes and then power up the Airport, wait 5 minutes and finally power up your laptop.
Then run the airport configuration utility from your laptop. Since you're not using an Apple computer, be sure that all of your firewall, and virus blocking and checking software is disabled before you run the airport configuration utility. Once you run the utility, it should detect your AirPort and allow you to use the configuration wizard to set things up.
Check back if you're still having problems.

How do I eject a DVD that just keeps turning in drive but will not eject?

How do I eject a DVD that just keeps turning in drive but will not eject?

check out Kappy's user tip:
Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this:
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following: /usr/bin/drutil eject.
If this fails then try this:
Boot the computer into single-user mode. At the prompt enter the same command as used above.
To restart the computer enter "reboot" at the prompt without quotes.

My phone will not charge. it will turn on when plugged in but will not reset or charge

My Iphone 4s is dead. I plug in it to the charger and the battery pops up on the screen, after a couple minutes it powers in but will not charge I ttmried to reset it and it powers off but will not power back up the battery pops back up...---HELP!!

Hello there, kendrafromgeneva.
Great job with the troubleshooting you've done so far. The following Knowledge Base article offers up some great steps to review for further troubleshooting of your issue:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge until your device turns on. This could take between 10 and 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue persists, please contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I just bought the 100-400 IS II. The lens hood mounted correctly but will not come off.

I just bought the 100-400 IS II through Amazon. The hood clicked in place nicely, but will not come off. Yes, I am pushing the button. I hate to send it back. Any suggestions?

Try turning the lens gently, at the base of the lens, clockwise, to loosen the pressure...when pushing the release button. I assume you mean the lens won't turn, when you push the release button..

I am trying to set up an email account on my iphone4s. I keep getting a message that the password id incorrect. It will not allow me to set the address up

I am trying to set my email up on my iphone 4s. I keep getting a message that the password is incorrect. and i cant set the email up

Then maybe you should ask your e-mail provider what's wrong.

How do I access an external hard drive that shows up in Disk Utility but will not show up in finder or on my desktop?

I have an external hard drive that just stopped showing up one day. Is there a solution to this problem that allows me to secure the data on the drive before reformatting?

I'm having the same problem bpay14, but with a CalDigit VR2 6TB RAID0 external hard drive.
One day it was showing on my desktop, the other it wasn't. And I still didn't update my Mavericks to 10.9.3 (still with the 10.9.2).
It shows up in the disk utility, and I can even Verify the disk and Repair it (but I don't wanna start repairing
something that probably doesn't need to be repaired, so I haven't clicked the Repaid button, only the Verify button) and it says its working just fine.
But it doesn't show in the Finder or the desktop for that matter.
And even if I force disconnect the cable, I get the usual "this disk was not ejected properly" notification
presumingly the disk was mounted on the desktop and I forced eject by unppluging it...
I found a way to force open the disk, through Disk Utility that's by clicking with the right mouse button
on the disk icon, and chosing OPEN "CalDigit AFRICA 6TB"... (see picture 1)
But... after that, it open a Finder window showing all my internal and external drives, but that drive's
name is in washed grey, like if it was unmounted (see picture 2).
When selected, I can see everything and work normally on the harddrive, even opening FCPROX projects or Libraries, copying from it and writing documents into it... just normal... (see picture 3)
BUT IT DOES NOT SHOW IN THE DESKTOP...
that's my problem...
I even did a Command+i for Info on the hard drive. (see picture 4)
Can anyone shed some light on this issue?
I would be eternally grateful!
Thanks in advance!!!
Cheers!

My phone says i am hooked up to wireless. but will not load anything.

Do you have a seperate AP providing your wireless or are you using the wireless built into the AT&T router? If seperate, you will need to re-configure the AP to the new equipment AT&T sent you.

Got a new modem today and now my phones will not load anything. Says i am hooked up to wireless. But cant load games,Facebook and well everything.please help.

My apple pad 1 has voice that says to slide to unlock but will not let me out in my pass code

my apple i pad I has voice message that says to slide to unlock but it will not let me put in my pass code. I tried to go into i tunes but i need the passcode to due that.

If it's saying what is on screen then you probably have VoiceOver (one of the accessibility features) 'on'. Try triple-clicking the home button and see if that turns it off, and if it does you can then change what a triple-click does via Settings > General > Accessibility > Accessibility Shortcut (or Triple-Click Home depending upon the iOS version on your iPad).
If that doesn't turn it off then you can either turn it off directly on the iPad (you need to use a tap-to-select and then double-tap to activate/type process and 3 fingered scrolling) to go into Settings > General > Accessibility and turn VoiceOver 'off', or you should be able to do it by connecting to your computer's iTunes (after typing in your passcode via the tap/double-tap process) : http://support.apple.com/kb/HT5018

My phone recognizes that the charger is plugged in, but will not charge.

Similar Messages

Maybe you are looking for