My phone thinks its constantly plugged into a dock connector and i cannot hear music/alerts/anything, what can i do?
i have restarted the phone and reset the settings.
Is there any debris/lint/etc in the docking port?
Similar Messages
-
Just installed new update to phone 5s this morning, now its saying plug into itunes but itunes doesn't recognize device.
when the files were being extracted my pc stopped any idea of a fix?
or can i remove the update from the program files and re-download it for my phone to be functional again?Hello giz mckenna,
The article linked below details a number of steps that can help get iTunes to recognize your iPhone.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
http://support.apple.com/en-us/TS1538
Cheers,
Allen -
My Iphone 4s shut down by itself after a phone call and I cannot turn it on. I took it to istore and they said it was unrespinsive and there is nothing they can do? Anyone has a clue what can be done? When I connect the phone to itunes it indicates that the phone should be restored, however when i try to restore it, it says the "software for this iphone is not currently available" Is there anything I can do other than put this brand new iphone in the grabage?
On computer, at the top of this page is a Tab for iTunes, click it, make sure iTunes is up to date. Also make sure computer Fire Wall and Anti Virus do not interfere with iTunes, turn them OFF to be certain.
-
Hi, anybody can help me please?
Call AppleCare and ask to be transferred to the Account Security Team.
-
my iphone 4 keeps flashing up with 'this device is not accessorised for this iphone' and its not plugged into anything, can anyone help?
The most common reason for this message is, the iPhone dock port needs to be cleaned, use a clean dry tooth brush. See if this helps. If you keep getting the message, then clean the dock port again very carefully with isopropyll alcohol, expecially the pins which are on top of the dock mid rib. If still problems make appointment with Apple Genius.
-
I lost my contacts on my 3gs and was not doing anything with the phone.. it was plugged into the wall charging... can anyone help??
cannect it to a computer and let it sync through iTunes. Contacts are a broad problem. You need to state where your contacts are located i.e. do you use yahoo mail? do you sync to iCloud? there are alot of answers for you problem but you need to be a little more detailed
-
I tried to update to ios7 but it said to plug into itunes. I've plugged it in several times but the update fails everytime and my phone continues to say plug into itunes. Any help is greatly appreciated
Your iPhone was hacked at a "small phone unlocking shop "
Only the carrier who locked the iPhone from new can unlock it no-one else
Anything else is hacking which forfeits any help from Apple and this forum
I also doubt that Orange will touch it
For an understanding what hacking does see here
http://support.apple.com/kb/HT3743..
Since all the UK carriers ( I assume you are in the UK )
offer unlocking you have trashed a perfectly good iPhone -
I am wondering if I need to eject my iPhone from iTunes or if it is fine to unplug the phone without ejecting.
If it's connected to your computer and synced with iTunes you should eject it. If it's only plugged into a wall outlet and not your computer, just unplug it (since there's nothing to eject it from).
-
updated iphone 4 to iso 7 and now my phone tells me to plug into itunes
http://support.apple.com/kb/ht1808
-
My phone is stuck on "plug into itunes". How do I fix it if it isn't being registered on Itunes on my laptop?
Hello there, gellarn.
The following Knowledge Base article offers up some great steps for troubleshooting your iOS device not being recognized in iTunes:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Once your device is recognized, feel free to follow this article if you are still seeing the connect to iTunes screen:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
No sound - iPad thinks it's plugged into dock
Using a 16GB Wi-Fi iPad 2. Been working fine since Friday. Today, I noticed it had no sound. Read all the threads about this, but all my sound settings and lock switch are set correctly. That is NOT the issue.
It was then I noticed when opening the iPod app, it shows "Dock Connector" in the top-left where the volume control normally is. Um, it's not plugged into a dock.
I did a full reset, which didn't help. I then did a full restore (redownloaded iOS 4.3) and it still shows it's connected to a dock.
So, just for grins, I plugged it into my car dock in my truck. It plays music/sounds through it just fine. When I unplug it, I get volume control back. However, as soon as I sync it or plug it into the charger, I lose sound again and iPod just shows it once again being plugged into a dock.
Cleaned out the connector to make sure nothing was in the jack and tried 3 different sync cables. I'm syncing to a mid-2010 27" iMac i5 quad core. It sync perfectly, but just kills the volume controls when I do.
Anyone have any suggestions before I send this back?Wow, the same thing just happened to me on my iPad 2. Going to try ALL the things you tried and see if I have any luck. I searched other Mac/iPad forums and didn't find anyone with this problem until now.
-
Hi
I have my iPhone 4s plugged into a dock and the dock connected to an amplifier with 2 speakers and a bass, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhone´s volume bar disappears and im not allowed to change the volume and its very loud. how can i change the volume? is there an app? any ideas??(my dock doesnt have infrared remote controller )
TY!!!!Kline25 wrote:
So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
Apple does not repair devices beyond replacing the screen on some models or a battery replacement. They replace the ENTIRE device.
For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device. Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
Apple will not touch the device now. They will know that it was opened elsewhere and that the replacement screen is not original. -
updated to ios6 on my ipod touch 4g when i try to turn it on it doesn't, it just comes up with the itunes symbol and the usb, so i plugged into laptop opened itunes and it says to restore back to ios5 i pressed restore and it cant connect to server? help?
Maunally restore it. In order to do this:
-Download the iOS 5.1.1 firmware from here http://www.redmondpie.com/download-5.1.1-ios-for-iphone-4s-4-3gs-ipad-ipod-touch -direct-official-links/
1. After downloading the firmware from the given link, open iTunes and click on your device.
2. Now press SHIFT on your keyboard and while pressing it click on "Restore".
3. A dialog box will appear.
4. Select the firmware you downloaded and click ok.
5. Done!!! Your iPhone will now be restored to 5.1.1 and if you had backed up your iPod before, then you can put all its settings afterwards. -
I'm travelling and trying to back up my new iPhone to iCloud. I have sufficient storage, am connected to wifi and it's plugged into a power source and yet it doesn't seem to work at all. I'm currently in India. Could that be the cause or can anyone suggest any reason why this wouldn't work?
"gets stuck" - are there any error messages?
If you get the error "Backup not successful" and you've tried deleting the last backup and trying to back up manually without luck, try the following test: Go to...
Settings>iCloud>Storage & Backup>manage Storage, tap your device name in the Backups section, then look under Backup options. Turn off all apps from backup and then do a manual backup. If that doesn't work, then this post will not help. If the backup works, then go back to the app list and turn some on and try another backup. If successful, keep repeating these steps. If it fails at some point, then try to zero in on the one app that seems to make the backup fail. (I had this problem and found one app failing, probably due to a corrupt data file.)
This process will take time, but if a backup works with no app data being used but clearly fails with the original settings, then somewhere in the mix of apps is a "bad" one. -
I just bought MacPro 15", i7, Quad-Core, upgraded to 8GB RAM. Its responding to slow to poen any applications e.g. word, ppt, chrome etc. reboot is too slow. Dont think its working so fast. Dosenot seems to be worth to money paid. What to do? Not happy with Mac.
Sandeep Goyal
Jul 8, 2012 2:26 AM
Is is possible to install Win 2007 in MacPro (retina display) with USB (2.0 or 3.0) as new Mac retina display lacks DVD.
MacBook Pro with Retina display, Windows 7
They have been calling their notebook a MacPro for a year. Or is it this?
https://discussions.apple.com/thread/4463661
Maybe you are looking for
-
Re: Satellite A200 unable to connect phone - No Bluetooth
Some years back I bought a Satellite A200 (PSAF6A-OWOOIN) running Vista, which my daughter has since upgraded to windows 7. Previously the notebook had Bluetooth connectivity to my mobile phone (not that I ever used it), however (now that I do need i
-
Can I use my macbook with a mac mini
can I use my macbook with a mac mini
-
Create a PDF file that can be opened in PS
Hello, I a cartographer that is creating a map with thousands of contour lines (among many other layers) in .ai. Unfortunately, I can't open this map in PS. PS will think for upwards of 10 hours trying to rasterize this file (and at that point it w
-
Best practice for updating ATWRT (Characteristic Value) in AUSP
I've notice that when we change the Characteristic Value of a Classification, that it does not update in the MM record. We have to go into MM02 for each material number that references Char Value and manually change it for row in AUSP to get updated.
-
Plaf: Using multiple Look'n'Feels at the same time
Hi in our application we use different color schemes. I know have a bug that forces me two provide two different UI implementations for the same class (JTextField). One UI in the normal context (grey) and one in a special edit context (kinda yellow).