My phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?

my phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?

Hi, Just put phone in the recovery mode and restore to the factory settings. It should work.

Similar Messages

HT201263 I tried to update software on my i phone 4s and the phone will not restart past the apple logo? The logo keeps flashing up but wont go further.. please help!

I tried to update software on my i phone 4s and the phone will not restart past the apple logo? The logo keeps flashing up but wont go further.. please help!

Place the phone in recovery or DFU mode (search Google) and restore.

Satellite L500 will not load past the 'welcome' screen

Hi,
My Toshiba Satellite L500 laptop will not load past the 'welcome' screen. The cursor thing just keeps going around and around but won't go to my desktop.
Last night it went into some temporary profile and it had a message saying 'your other profile cannot load at this time please try again later'
Any help would be greatly appreciated.
Thanks,
Kara

The error message is not known to me and also searching in google didnt get any hints.
Possibly your Windows OS is muddled up.
Did you try to boot Win 7 in safe mode?
Try this. Restart your notebook, tap the F8 key.
In advanced boot options choose the option called Safe Mode.
If the notebook does not allow booting in Safe Mode, try the option Last Good Known Configuration.
If this didnt help, try Repair my Computer. Here you can choose between different settings.
The one which could solve this is HDD recovery which helps you to set the notebook to factory settings. But this means also that your HDD would be formatted!
So be aware of this!

My MacBook pro will not load past the grey screen with the spinning wheel. What do I do?

My MacBook will not load past the grey screen with the spinning wheel of death. Anyone have any solutions?

Invoke Safe Mode by holding down the shift Key as you restart. This will do a Disk Utility "Repair Disk" as it starts up (so it takes a few minutes longer) and then load with minimal extensions loaded, and request your login username and password, even if you normally do not use them to log in.
Safe Mode runs the screen using simple, unaccelerated commands. Most things are available in Safe Mode, but things that rely on extensions will not be.
Acomputer that works in Safe Mode, but fails again after you restart, often implicates your extensions and add-ons.

Windows XP, will not load past blue error screen

Hi, been wondering for a while if anyone can help me...
My xp system will not load past the blue error screen which appears after the computer has shut down suddenly or improperly.
Regardless of what actions you choose to take (safe mode, most recent settings...etc) the system simply goes past the blue screen, onto the windows logo loading page, where the loading bar moves for around 10 seconds, before returning back to the blue loading page.
So far I have tried leaving the computer for as long as a month unused whilst I was abroad, removing the battery for various amounts of time, and leaving the computer running for as long as a day.
In the absence of a recovery disk, I have no idea how to get it back to form, and would welcome any hints or suggests, bearing in mind I am no computing genius (If you had'nt guessed). Preferably, without loosing my irreplacable pictures and videos stored on the hard drive, however that is only preferably,
Thanks, Jay

Hi Jay,
i know what it's like to not able to boot even into safe mode command prompt.
In your case I would do either of below:
Download a bootable CD ISO called "HDD Regenerator" or [Hiren's BootCD|www.hiren.info/pages/bootcd] which includes many other great tools. Burn the ISO image onto CDR.
1. Use the HDD Regenerator to boot the PC and use it to scan the whole HardDrive from 0, it will scan and fix all the bad sectors which may cause Windows failing to boot as systems files are corrupted. You will be suprise how great this tool can fix bad sector HDs.
2. If above does not work, the the Hiren's BootCD to boot the PC, navigate to Symantec Norton Ghost or Acronis True Image to Clone you hard drive, you can use USB external harddrives.
Then you can rebuild the PC with second partition large enough to store the HardDisk-IMAGE, use Ghost Explorer/etc to restore your personal files.
I have been dealing with lots of this issues as well. Let me know if you need more help.
Good luck!
Patrick

My 4S phone will not load itunes

My phone will not load itunes, just spins on blank page. Any suggestions?

Hello Toniamato,
It sounds like your phone is not charging or charging very slowly. I would use these troubleshooting steps from the following article:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue is persists, please contact Apple Support.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Re: PC will not load past splash screen.

Re: PC will not load past splash screen.Pavillion p7-1235, win 7 home. Cannot get to bios, or safe mode.
loaded Linux Mint on a new hard drive. went back to win 7 and problem started. thanks for any help

Hi snakeman:
I regret that you are still having issues. I am sending links to documents that I hope will assist you Windows 7 Does Not Start click here ,Troubleshooting System Recovery Problems (Windows 7) click here. and Testing for Hardware Problems Using Hardware Diagnostic Tools (Windows 7) click here.
I hope you find these useful.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

IPhoto project will not upload even in safe mode when trying to buy book, any suggestions on how to complete the "BUY BOOK" process. Christmas gift, really need to get this done, have worked MANY hours on putting it together. Please help!

Iphoto book will not upload even in safe mode when trying to buy book, any suggestions on how to complete the "BUY BOOK" process?

Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the fix below:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
After each run thru the repair process see if you can create a PDF file of the book as described in this Apple Document: iPhoto '11: Preview a book, card, or calendar before you order or print it. If you can try ordering the book. If you can't finish trying all of the otpions and then boot into Safe mode and try there.
OT

HT2801 cd will not load in mac book pro. Tried different cd's, tried same cd on other mac and it goes in okay. Any ideas?

CD will not load in mac book pro. Tried different cd's, tried same cd in different mac book but it works on other mac book but will not work on initial mac book. Tried pressing command/option/esc. Tried restarting and shutting down computer but still will not load cd. It goes in but pops back out. Any ideas?

lorenzod3046 wrote:
I have already tried compressed air. No luck. How will I be able to get the cleaning disk in to load if I can't load a regular cd?
How will i be able to get the business card in far enough to reach the inner area where the optics probably are located?
Cleaning discs will load. On a MBP that has never been cleaned, run the cleaning 2-3 times. If you use the slot a lot, use the cleaning disc about every 3 months.

Attempted to create a slideshow (version 9.3) and get the dreaded twiling ball that will not go away; iphoto locked up when open. how do I get rid of the ball. Have forced quit seveal times and opens with the ball p

Attempted to create a slideshow (version 9.3) and get the dreaded spinning ball that will not go away; iphoto locked up when open. how do I get rid of the ball. Have forced quit seveal times and opens with the spinning ball.

Make a temporary, backup copy if you don't have a backup copy of the library (select the library and type Command+D) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4
Launch iPhoto and try again.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

TS2845 Receiving Your Apple TV is not authorized to play this content when trying to Air PLay from IPAD 2 to the apple TV. This only applied to renting a movie.

Receiving Your Apple TV is not authorized to play this content when trying to Air PLay from IPAD 2 to the apple TV. This only applied to renting a movie.

I get the same error on some video content (specifically from the iTunes Library on my Mac). Netflix is fine. Movie previews are fine. I didn't rent/buy anything since this issue came up. I reset the AppleTV (20 minutes of re-entering everything). I am going to try another HDMI cable but the error does not say HDCP as shown in other google searches regarding this issue ( http://www.tuaw.com/2010/10/05/hdcp-may-spoil-your-apple-tv-fun/ ).
Was able to play movies rented from the Mac a few weeks ago
Have not tried to re-authorize
AppleTV does not show under devices in iTunes - but I don't ever remember seeing it before
AirPlay'd movie from iPad1 - sound came thru no video (luckily I had a iPad to HDMI cable that was in my work case that worked otherwise movie night with the family would have been tragic)
I'm interested to learn how to fix this without having to waste 30 minutes fooling with three devices, four different wire configs, and a few swear words all while people sit on the couch and laugh at my earlier pronouncements of Apple being the best.

My Macbook Pro will not load past grey Apple screen...

Last night my Macbook Pro froze so I closed it and went to bed. Today when I opened it, it was still frozen, so I held down the power button and rebooted it. It got as far as the grey Apple screen with the spinning wheel and will not load any further than that. I've rebooted a couple times since and it continues to do the same thing, stays on the grey screen forever.
I searched this problem on the Apple Support Communitites and none of suggestions (holding Shift after the startup tone, holding Command+R) have worked so far. Is there any way to fix this problem without losing my data or having to pay to talk to Apple Support? PLEASE HELP! :(

Zzoozu wrote:
None of that made sense to me or helped me. Anyone else? Maybe someone who has answers dor someone not a computer genius?
Then we can't help you as we need you to be able to help yourself and the instructions are complicated and long to paste here over and over again for the same proceedure.
Hire the services of a local Mac computer repair before you delete your data by accident.
You can jump down and do #8, that might clear the issue right away, but some programs are not going to work and require updating or reinstalling again.
..Step by Step to fix your Mac

HT1420 How do I get my iphone 4s to load everything onto itunes to do a master reset when it will not allow me to charge it when it is turned on. When I plug the cable into the usb on the computer and the phone at the same time nothing happens.

My phone will not back itself up to icloud because it takes too long and the battery dies before it can complete it . Its been months since it backed itself up and I cant get it to charge when it is plugged in and connected to wifi. I do not want to loose my pictures. This is sooooooo frustrating .

Hello Toniamato,
It sounds like your phone is not charging or charging very slowly. I would use these troubleshooting steps from the following article:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue is persists, please contact Apple Support.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Phone will not load contacts

I just got my new phone after making an insurance claim, and i synced my google account yet my backed up contacts will not load on my phone. I really dont want to go in to the store and have them move them all over. Can anyone give me some things to try?

Hi there HeatherMO! The first thing I recommend you try when syncing your contacts is to make sure that Google/Gmail has been set to be the default backup client. Go into Contacts> Menu> More> Settings> Contacts Storage. Make sure the green button is next to Google. If you've tried this but it hasn't worked, please let me know. Thanks!
Dion M.
VZW Support
Follow us on Twitter www.twitter.com/vzwsupport

IPad will not load past Apple Logo

My iPad froze, so I rebooted it by holding the home and power button for 10 seconds. Now, it won't even load past the Apple logo. Please help me!

If the reset don't work then I think that you may need to contact Apple

My phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?

Similar Messages

Maybe you are looking for