My phone will not reset because it fell in the toilet
my old iphone will npot reset since it fell in the toilet and i have to reset it before i send it back
When an iPhone get submerged in water the last thing you want to do is try to turn it on. The water could cause the electronics to short out and permanently ruin the iPhone. Most people that drop their iPhone in water try to fully dry out the phone by fist trying to remove any water by airing it out and pouring it out. Then they place it in a bag with rice and let it remain there for at least three days. Then, and only then would you want to try and turn the iPhone on. Many times it will then work, but unfortunately also frequently it still will not work properly and need service or replaced.
Similar Messages
-
I turn off the phone will not turn to dear, I need the photos...
I turn off the phone will not turn to dear, I need the photos emergencies because there I have very important information. That I can do to recover photos. I understand that you had downloaded the iCloud but when I Icloud not appear on photos.
Through iTunes, plug it in and you should be able to do a iCloud restore
-
I was transferring information from my old iPhone to my new iPhone 5S via iTunes and I have completed the process but my phone will not restart, it is stuck in the "Connect to iTunes" screen. Any ideas?
See this article to assist you with your restoring your device once the device is left in recovery mode.
http://support.apple.com/kb/ht1808
good luck -
my phone will not let me purchase things from the app store and it says I should contact support when I try
Then you should do what it tells you to do and contact Support:
https://getsupport.apple.com/GetproductgroupList.action
Cheers,
GB -
Phone will not reset
do oyu mean restart?
IF so then
Restart iPhone: Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart. -
my phone will not reset
In your profile you indicate a jailbroken device. If that is in fact true, it cannot be discussed here on the forum. That is a violation of the TOS you agreed to. Jailbroken devices cannot be discussed here, it violates the software agreement of your device and voids your warranty and any support from Apple or the forum. You will have to seek help elsewhere.
-
When my iPhone 5c is in the autolock position all incoming calls go straight to my voice mail. the phone will not ring. When the autolock is turned off the phone will ring. Any suggestions? thank you
You are great. it works. thank you.
-
It will not recognise sound and if I take it off the charger, it immediately switches off. I've installed iOS8 previously but nothing is working. Please help!!
There's only one thing you can do: make an appointment with Apple genius at the Apple retail store for a out of warranty replacement.
-
Help reset username and password on my phone. Already reset password on account.
For iOS 6
• Settings/iCloud
• Select account
• scroll to the bottom,
• select Delete Account.
Then Log-into your other iCloud account.
Just as I said/Just as wjosten said. -
My Icloud will not backup on my iPhone. What do I need to do about this?
http://support.apple.com/kb/HT4859
-
Some of my songs will not play on my new I5 phone. I see them on the playlist but when I try to choose them it skips to the next song
First... Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Next.
It could be a corrupt download of those songs...
If you live in a Region that allows re-downloading Music...
Delete the Song(s) and re-download...
See Here > Download Past Purchases
http://support.apple.com/kb/HT2519
If not... Contact iTunes Customer Service
Apple Support iTunes Store Contact Us -
TS3992 my phone will not complete a back up to the cloud
I have tried and tried to do a backup to the cloud and my phone never completes the backup. I have 25GB cloud storage which is more than plenty. My phone is a 16GB 4s. I can start the back up before i go to bed and it still never completes
If you get the error "Backup not successful" and you've tried deleting the last backup and trying to back up manually without luck, try the following test: Go to...
Settings>iCloud>Storage & Backup>manage Storage, tap your device name in the Backups section, then look under Backup options. Turn off all apps from backup and then do a manual backup. If that doesn't work, then this post will not help. If the backup works, then go back to the app list and turn some on and try another backup. If successful, keep repeating these steps. If it fails at some point, then try to zero in on the one app that seems to make the backup fail. (I had this problem and found one app failing, probably due to a corrupt data file.)
This process will take time, but if a backup works with no app data being used but clearly fails with the original settings, then somewhere in the mix of apps is a "bad" one. -
I am trying to run an update on my iphone and I received an error saying the firmware file is not compatible. What does that mean?
Navigate to this folder and delete any and all .ipsw files you find. You will have to turn on "show all hidden files & folders" to see them:
OSX:
~/Library/iTunes/iPhone Software Updates
XP:
C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPhone Software Updates
Vista & 7:
C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates
Turn off or disable ALL security software & any firewalls. Make sure you're using a high powered USB port directly on your computer...no hubs, if a desktop use a port on the back of your computer. Disconnect ALL other USB devices.
Try again. -
8900 System upgrade, now phone will not wake up unless I press the standby key.
Yesterday I endured the lengthy recommeded system upgrade on my 8900. Unfortunately, the upgrade did not go perfectly. It was unable to reinstall my chat logs from BB messenger, but I wasn't all that concerned about it.
However......now, when the backlight in the screen times out, I can only wake up the screen when pressing the standby button. No other key will wake up the screen. I checked my settings for screen and keyboard in the options folder, but there is no "default" key choice to wake up the screen. When the screen is black, and I press the "lock" key, it will lock, but the screen also does not "wake up" to show me it has been locked. Apparently only the standby key is being acknowledged once the screen is blacked out.
Is this a "default" setting for the new OS? Or, did the OS just install badly? I have also been told that if you cover the led indicator with your finger, the trackball ring and keys should light up....this also does not seem to be working.
Anyone have any idea what hte formal changes are to the new system upgrade, or is this a bad install, or worse, a bad phone that otherwise worked perfectly BEFORE the upgrade?
Any suggestions would be appreciated.
Cheers!go into sys. preferences > energy > UNcheck 'put hard disk to sleep' on both tabs for charge and battery
-
iphone 4s need help battery not workin since uptade of ios7
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
Maybe you are looking for
-
Selecting data in the table control
Hi Friends, I have final data in my table control now the user wants to select only few records from the displayed data, for that I kept a check box for selection, But my question is I am unable to read the selected data. Actually user requirement is
-
How to count words in a text ?
Hi all, can anyone show me how to count the number of words in a text. thank in advandce, Toan.
-
Where are OCI headers for Oracle 10g XE Linux
I installed both oracle-xe and oracle-xe-client on ubuntu 6.06 linux via apt-get. It runs good. However, I can not find the oci header files needed for building programs in C. Where can I find these header files?
-
Hi All, I have implemented a VPD and added policies to Table_A and Table_B. The policy function of Table_A returns a predicate like this: EXISTS (SELECT 1 FROM TABLE_B WHERE TABLE_B.COLUMN_1 = TABLE_A.COLUMN_1) And the policy function of Table_B retu
-
Macbook Pro with retina display : GPU bottleneck?
The new exciting MPB with retina doesn't offer any upgrade for the most powerful Nvidia Geforce GTX 680M. Do you think the actual 650M would be a bottleneck? Just checked some benchmarks at http://community.futuremark.com/hardware/gpu/NVIDIA+GeForce+