My phone will not turn on along with its mophie case, which I believe is due to water damage. When it did resppnd, it cited error 1608. Is there a way around this
My phone will not turn on along with its mophie case, which I believe is due to water damage. When it did resppnd, it cited error 1608. Is there a way around this?
Thanks,
Raphael Minot
A way around what?
Similar Messages
-
When I try to buy ibooks from my ipad, the virtual keyboard is not the same as my computer keyboard, and since my password consists of letters, numbers and symbols, the ipad keeps displaying "incorrect password". Is there any way around this please anybody?
katykittenoid wrote:
the virtual keyboard is not the same as my computer keyboard
Are you using the virtual keyboard to input your password and you cannot see/find the characters you need on that keyboard?
Or are you trying to use a bluetooth keyboard and pressing the printed key does not produce the right character? -
I have just updated my iPhones 5s with and my phone will not turn on one now please help
I have just updated my iPhones 5s with las test update ios 7.0.5 and my phone will not turn on one now please help
Try a Hard Reset,
press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
if that doesnt work you may need to do a restore
http://support.apple.com/kb/ht1808 -
My i phone will not turn on this am after I had made a phone call. I have tried to recharge it but no change. I need to know whether or not I can remove battery and if so how do I open the case ?
Just read the solution from raymze so thank you this has worked - I held the home and sleep button together and it has rebooted. Many Thanks.
-
HT1414 on my phone it has a itunes (on top) with a cord plug under it and phone will not turn on
on my phone it has a itunes (on top) with a cord plug under it and phone will not turn on. How do I restart phone??
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
My phone will not turn on, therefore I have received a replacement phone but am wanting to reset my old device. It is not locating it because it says it is offline however I cannot turn it on at all. Can I start with my new device and not reset the old? Any help would be greatly appreciated. It's been a week without a phone
That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.
-
My phone will not turn on. I did a hard reset but all that my screen will show is a picture indicating I should connect the power cord to iTunes (power cord symbol with an arrow iTunes icon).I don't know my serial # and I do not have acces to my laptop.
The serial number has nothing to do with this.
YOur phone is in recovery mode.
You will need access to a computer with itunes on it to restore your phone.
http://support.apple.com/kb/HT1808 -
Phone will NOT turn on after synching & updating (or trying) to ios 6. ? ..... Is it REQUIRED to "restore" to factory setting? When researching, I read that you will get an option to restore from back up. I am not receiving any options on iTunes.... restore only & basically it is telling me I will lose everything.
I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?
-
My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.
Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors -
My phone will not turn on after downloading ios 8
I updated to the IOS 8 this morning and now my phone will not turn on, it just keeps directing me to itunes and every time I try there is some kind of error, what do I need to do?
If the screen is showing you the USB wire pointing to iTunes it is telling you it has entered the recovery mode, and you have to use the instructions in http://support.apple.com/kb/HT1808 to connect to iTunes. In summary:
-
I have a n IPhone 4S. I upgraded to IOS7 and then tried tp go back to my prevous IOS and now my phone will not turn on at all.
I tried to do the same, but couldn't find ios 6. I even tried the APPstore, to download the last IOS6 version.
The most problem is the running out of the battery.
I've checked each app who is "eating" the most power.
The battery stoped runaway, when I closed the weather service....
So for now, I will use regular internet service, and probbaly will do to more app.
Until, finaly, I will find my self with all the applications closed....:-)
That will be the sign, to replace my phone to anderoid....:-)
Till now, there is no any sign from Apple to have a glance to our complanes. -
HT4061 my phone will not turn on
i cant get the serial number .. my phone will not turn on
Then see this support document and try that. http://support.apple.com/kb/TS3281
-
I downloaded the ios7 update and my phone will not turn on
I downloaded the ios7 update and my phone will not turn on
1. Charge with AC adaptor for at least 30 minutes
2. Reset the phone (no data loss): press both the homeand power buttons for at least 10 seconds, releasing when the Apple logo appears. -
My phone will not turn on, is showing a sign of "loading", what should I do?
My phone will not turn on, is showing a sign of "loading", what should I do? I put it to charge but will not turn , help me please !
There are only a few things that prevent an iOS from charging When using the charger that came with the iPhone and having that plugged into a wall outlet.
1. No power in the outlet.
2. Bad charger. Try a different charger.
3. Bad cable. Try a different Apple branded or name brand cable.
4. Dirt, lint or fuzz in the connection ports. Check and carefully clean with a wooden toothpick if necessary.
5. Software glitch. First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
6. Hardware failure. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. -
My phone will not turn on after downloading software
I just downloaded ios5.1 to my iphone 4 and restored my previous information and now my phone will not turn on.
You don't download IOS onto your iPhone.
Use computer iTunes with your iPhone connected and selected.
Select Summary tab in iTunes and click the Check for Update button.
Maybe you are looking for
-
Need to validate a existing field in the table maitainence Generator events
Hi EXPERTS, There is one Z-table and for that TMG also there. There is custom transaction for sm30. Now I need to validate one field BNAME for new entries I have created event -05(creating new entry) it is validating correctly. But now another requir
-
How to insert Serialised Object(XML DOM) into Oracle Table(as BLOB or CLOB)
we need a urgent help. How can we insert and retrieve the XML Document DOM Object into Oracle Table.Actually we used BLOB for insert the DOM Object,its inserted finely but we have a problem in retrieving that object, we got error when v're retrieving
-
Here are the logs: [2010-12-22:08:30:03] Runtime Installer begin with version 2.5.1.17730 on Windows Vista x86 [2010-12-22:08:30:03] Commandline is: [2010-12-22:08:30:03] Installed runtime (2.0.3.13070) located at c:\Program Files\Common Files\Adobe
-
Error 500.00 just with Azure, locally working well
Hi, how are you? I'm testing the deploy via Visual Studio 2003, but when I deploy I got the error 500.00. If I run via Visual Studio (Locally) works fine but using Windows Azure I get this error Module ManagedPipelineHandler Notification Execut
-
when i create my new apple ID account i recive a message that told me This Apple ID has not yet been used in the ITunes Store and when i tap review it tells me that i must have a visa or master card or ITunes Gift Cards and i do not have anything, wh