My phone will only show the apple sign when i switch it on .... what do i do

My phone wont start ... when i turn it on, i get the apple sign, it stays for about a minute, then the phone switches off again ... what do it do?

Sounds like you'll need to restore it via iTunes.
http://support.apple.com/kb/ht1414

Similar Messages

  • My itouch only shows the apple sign but wont actually turn on, what do i do?

    My itouch only shows the apple sign but wont actually turn on, what do i do?

    Try here
    iOS: Not responding or does not turn on

  • My ipod video will only show the apple sign

    i got a 30 gb ipod video from someone because they cant get it to work. he said if i could get it to work i could have it so i bought a charger and plugged it into the computer. it said very low battery please wait right at first and had a little circle thing that showed it was loading. now it will only show an apple sign on the screen no matter what i had it plugged in over night i tried reseting it but it just went right back to showing the apple sign is there anything else i can do without sending it to apple because it is not under warranty anymore.

    See if these help.
    iPod shows only an Apple logo and doesn't start up.
    Only the Apple logo appears when turned on.

  • My phone will only show the apple icon and shut off.

    My phone will only turn on for like 30 seconds, and then shuts off, and it won't sync to iTunes. When I took it to an AT&T store, they told me it just needed updated, but iTunes is not finding my phone when I plug it up. Does anyone know how to fix this problem?

    Mine is doing the same thing - started two days ago. Yesterday it came back by itself literally whilst sitting on the table, but slow, finally returning to normal speed after about 3 hours, then locked and reverted to the apple symbol, where it's been for 24 hrs. Have tried all the things on the previous post's link. At a loss!!!!!

  • Dropped my iPhone in snow and now it will only show the apple logo when plugged in

    I dropped my iPhone4s in the snow the other day, consequently it got wet. I could see the condensation in the camea and flash and the screen turned black however the phone still worked as when my friend called me it vibrated but I couldn't answer it because of the screen. The flash also was constantly on so it seemed like everything was working inside the phone but just not the screen.
    As soon as I got home I left the phone in rice for 2 days.
    I got the phone out and plugged it in to charge. The apple logo showed up and the phone vibrated but en the apple logo disappeared and the screen turned black again. I unplugged the phone and plugged it in again and the same thing happened with the logo again but no vibration.
    If I take the phone out of the plug it will just stay as a black screen.
    Any suggestions as to what is ring with it or what I could do to fix this?

    You've most likely cooked it. Make an appointment at the genius bar. Take the phone and your credit card with you. An out of warranty replacement will cost you $199.

  • HT4623 my phone will only show the apple icon for about 15 secconds and then goes dark. what do i do?

    what do i do?

    Sounds like you'll need to restore it via iTunes.
    http://support.apple.com/kb/ht1414

  • How do i fix my phone it will show the apple sign when i put it on the charger it will show the apple sign and it wont charge and it will not come on how do i fix my phone i have the iphone 4s

    how do i fix my phone it wont charge it will show the apple sign when i put it on the charger and it will show the apple sign and then it will shut right back off and it wont come on and i have the iphone 4s how do i fix my phone

    Check the USB port and the USB cable for any kind of lint, debris or bent pins.
    Try another, working USB cable.
    If still no luck, get it checked by visiting an Authorized Apple Service Provider or contact Apple Support to get it serviced:
    iPhone - Contact Support - Apple Support

  • My ipod won't start. It only show the apple sign for a second than restart

    Hi i have a ipod classic 80 gb
    I try to sync it to my itunes but i just won't start, also i don't thing my ipod is charging anymore.
    It only show the apple sign for a sec. than restart again and again,

    Hi PBAYARD,
    I see that you are experiencing an issue with your iPod classic. Here is an article for you that will hep you through some troubleshooting steps regarding this issue:
    iPod: No power or frozen - Apple Support
    https://support.apple.com/en-us/TS1404
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • My ipod classic wont start it only shows the apple sign and wont sync ? can anyone help

    my ipod classic wont start it only shows the apple sign and wont sync ? can anyone help

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPod won't turn on
    http://support.apple.com/kb/TS1383
    -Griff W.

  • My iPod is only showing the apple screen when reset it turns its self back on any ideas how to fix it?

    My iPod wont switch on its only showing the apple sign I have tried resetting it multiple times but it only switches its self back on again it's not showing up when plugged into the computer either can anybody give me advice on it? ( it's over a year old so not under guarantee anymore either) 

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT201210 the screen on my ipod touch will only show the apple icon it will not turn all the way on

    the screen on my ipod touch only shows the apple logo.it will not shut off or turn all the way on and when plugged into itunes it will not allow the newest update

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Will only show the apple logo thats it I can do noithing else

    my ipod only shows the apple logo and willl not do anything else how do i fix it?

    Try to Reset your device. 
    Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off that shows up first).

  • My Ipad device is only showing the apple icon nothing else is happening..what's wrong

    How do I get my screen to come back on, it is only showing the apple icon.

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, if you have IOS-7, read this.

  • IPad 2 is won't start only showing the apple sign

    Hi,
    my iPad2 died on me. It was very low in battery, so I started charging it. Everything looked fine until the apple sign came up. And that is it. It won't start. It doesn't connect to iTunes and re-start doesn't work either. Any suggestions? Thanks for all help!

    BTW - it doesn't seem to charge either. Apple sign only comes up while connected to power output (and trying to re-start), when I disconnect and try to re-start I get the "low battery - connect to power" sign - even though the iPad has been connected for several hours.

  • My iPad 2 has frozen - it will only show the Apple logo. Any help?

    My Ipad 2 has frozen andjs shows the Apple lgog. Ant thoughts?

    Hold down the on/off  and the home button for about 30 sec, if should restart.

Maybe you are looking for

  • Block the goods receipt against a purchase order without a record condition

    Dear I need to block migo against a po if FRB1 record condition price have price value 0 I need to block only MIGO not the creation of the purchase order. How can I do this ? Thanks.

  • I'm having trouble connecting as well.  HELP!!!

    Here is what I get when I run diagnostics. I have flushed my DNS settings, made sure iTunes could get through my firewall, turned off the pop-up blocker. I don't know what to do: Microsoft Windows 7 x64 Home Premium Edition (Build 7600) Hewlett-Packa

  • JNDI definition for database functions in transformation

    Hi, I'm new to BPEL and I need to use it for data transformation from MS SQL 2000 DB to CSV file. I have created synchronous process with relevant partnerlinks for the SQL DB (read) and CSV file (write). During creating the MS SQL DB partnerlink I cr

  • How to restrict printing of once printed A/R Invoice

    Hi Experts, In India it is Legal requirement of Excise duty authority that once an A/R invoice is printed then it should not be allowed to print again. Is it possible in SAP Business One ? If not then anyone has idea how to do it? Any work around / s

  • Possible Pixel Aspect Problem - PE7

    I'm a newbie to video editing. Widescreen (16:9) DVDs that I create with Premiere Elements look correct when played on my PC with the Intervideo DVD player but are horizontally scrunched to 4:3 when played with my DVD player on my widescreen TV. In b