My phone won't even turn on after ios7

I downloaded the new software and now my phone keeps telling me to plug it into itunes. When I do that it wants me to restore to factory settings because there was a problem with the download, but then itunes gives me an error. I have tried rebooting my phone and everything but nothing works. I don't know what to do. Can anyone shed light on my situation?

Try following the steps in this article: http://support.apple.com/kb/HT1808

Similar Messages

Phone won't go to sleep after ios7 update

My phone won't go to sleep after the ios 7 update unless it is on auto lock which I do not want it on. Can anyone help me with this problem?

could you fix the problem? I have set mine to all the different time restrictions for it to sleep, and it isnt happening. Consequently, my iphone has been overheating at night when I dont manually put it to sleep. By now Im thinking the battery life has been diminished since it is not lasting as long as when it was brand new (iphones 5s)

MacBook won't even turn on after attempting to Install Windows XP with Bootcamp

Help?!

The new ram doesn't fit. The laptop won't turn on with old ram. It worked before I removed it now it doesn't. It's I'm there tight so don't tell me to put it in with pressure because I did

MacBook won't even turn on after installing new ram

I am using the 2010 MacBook (white 13 inch) I bought ram (two 2gb modules) and was going to install it. I removed my Original ram, but accidentally powered it on it the process (no ram was inside). I got a longed beep. I held the power button and shut it off. I then put the ram back in and it won't turn on. I don't hear any parts moving, no power, nothing. Yes I put the ram in right, an it's tight as can be. Its pushed in well. Help! I never put the new ram in!

The new ram doesn't fit. The laptop won't turn on with old ram. It worked before I removed it now it doesn't. It's I'm there tight so don't tell me to put it in with pressure because I did

My Macbook Pro is about 4 to 5 years old. I've noticed the last few months that speed was becoming much slower. It slowed to a crawl last week and won't even turn on now. Where do I take this to near Jackson, Michigan for service?.

My Macbook Pro is about 4 to 5 years old. I've noticed the last few months that speed was becoming much slower. It slowed to a crawl last week and won't even turn on now. Where can I take my Macbook Pro for service near Jackson, Michigan?.

Things You Can Do To Keep Your Computer From Slowing Down
If your computer seems to be running slower here are some things you can do:
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

My Sony Xperia Z won't start /turn on after failed update attempt

Try this connect your phone to the wall charger > press andhold power & volume up > let it charge for 1 or 2 hours > after 2 hours > repair your phone with SUS Update Service (SUS) http://www.sonymobile.com/gb/tools/update-service/ http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe PC Companion (PCC) Bridge (for Mac) Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355

A similar problem to the other posters, my Sony Xperia Z won't start after a failed update attempt. Following the support suggestions on the Sony website (http://www.sonymobile.com/sg/support/faq/w8-walkman-phone/update-software/software-update-failed-ps101/) failed. Solutions posted on this forum thread (http://talk.sonymobile.com/t5/Xperia-Z-ZL-ZR/My-Sony-Xperia-Z-won-t-start-turn-on-after-failed-update-attempt/m-p/401787#M20133) have also failed. When I plug the phone into the wall charger, the LED comes on red, the SONY logo appears on my screen, followed by a message indicating that "The Software update failed. Make sure that your phone is connected to the computer and try again.", and then the phone turns itself off. The cycle repeats itself with no indication that my phone's actually being charged. Since it is unable to charge, plugging the phone into my computer does not trigger the update process to start, so I can't "try again", as the message so helpfully suggests. The computer also does not recognise my phone as being connected despite following the PC Companion's instructions to 1) unplug the device, 2) remove and replace the battery (which I can't do, because the battery is built in), and 3) turn it back on (which, again, I can't do, because the phone won't charge in the first place), before 4) plugging it back into the computer. Please help... Thank you.

I've followed all the instructions in order to restore my ipod touch yet it won't even turn off or show the red slipper to shut down. I've tried holding down both buttons each at a time it doesn't do anything. Anybody ever experience this? If so help?

I've followed all the instructions in order to restore my ipod touch yet it won't even turn off or show the red slipper to shut down. I've tried holding down both buttons each at a time it doesn't do anything. Anybody ever experience this? If so help? Should I just go to the apple store?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I bought an external hard drive in June (this yr) and it suddenly stopped appearing on the desktop. Disk Utility could see it. It wasn't the cord - now that I've tried that, the ext won't even turn on. I need that data off the drive BADLY! Help!!??

The drive stopped showing up consistently at first, then stopped all together. Disk Utilities could see it, verify it but not repair. I need it backed up. I took it to a local computer shop who tried a different cord. Nothing. When I got home, I read through several support forums dealing with this issue. One said I needed to zap my PRAM on my MacBook. I did so. Now the external won't even turn on! Any hope of getting the data off that drive? It is still under warranty but undoubtedly the firm will NOT attempt to back up the drive before issuing a new one. I downloaded something called TestDisk 6 that another forum suggested but no one offered any clue how to use it. I cannot figure the first thing to do with it! It appears to may be a Windows formatted program, anyway as most of the instructions end in the suffix .exe. I'm at a total loss...both personally as well as having already lost a complete week of business. Any suggestions would be appreciated but please note - I am NOT that computer literate. Just telling me to download something won't help me if I can't figure out what to do once it is downloaded. Also, taking this hard drive apart will void my warranty. Not that that is the biggest of my worries at this point but I wouldn't have the first clue anyway! I live in an area where we have something called Mac Authority in the mall and a Best Buy. Those are the only 2 connections to Mac-related stuff I have access to. Help!!! Please?

If your external drive does not have an independent power supply, you may wish to consider a couple of lower-cost options before tossing the drive. Bus-powered drives have no external power source and must get all their power from the computer. They can exceed the computer's USB energy budget.
Cheapest option:
1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
This gets power from two of the computers USB porst sna can provide enough power to wake up an under-performaing bus-powered drive.
If you don't have enough ports to use this, try the next cheapest option:
Newer Technology 7 Port Hi-Speed USB 2.0 Hub with Power Adapter for Mac & PC
Such a hub has a an independent power supply to make up for wahat the comptuer fails to provide.

My ipod touch was dropped on the ground, screen is cracked, won't even turn on when it's being charged, what to do?

my ipod touch was dropped on the ground, screen is cracked, won't even turn on when it's being charged, what to do?

What gen and GB is it? Replacements start at 99 for 8GB 4th Gen, Accidental damage is not covered under hardware warranty, thats not a hardware defect.

I just had 2 MacBook pro's stop working completely. No previous issues. Won't even turn on when plugged in.

I just had 2 MacBook pro's stop working completely. No previous issues. Won't even turn on when plugged in. Any ideas?

See if a SMC reset will breath life into them:
https://support.apple.com/en-us/HT201295
If not, make an appointment at an Apple store genius bar for a FREE evaluation. Warranty status is irrelevant.
Ciao.

My iPod just stopped working, it won't even turn on ... what should I do?

My iPod just stopped working, it won't even turn on ... what should I do?

i book has froze,
following these steps and the ipod should reboot.
1>press and hold both power and home buttons up to 30sec till the apple logo shows let go of both buttons.
2>let ipod reboot.
3>once it reboots press and hold the power button and slide to turn off.
4>give it 30sec's and turn back on.
5>connect to computer and sync
hope this helps

Water got on screen, now ipad won't even turn on, is this fixable and at approximately what cost?

Water got onto screen of ipad, now won't even turn on. Is this fixable and at approximately what cost?

Apple does not repair iPads, but will replace the entire iPad for a flat fee; see the Repair Pricing section here:
http://www.apple.com/support/ipad/service/faq/
There are independent iPad repair services that may be able to replace the screen for less. Do a web search for "ipad repair".
Regards.

My imessage doesn'twork at all...won't even turn on?

I downloaded the update for my iphone4 and now I can't send or recieve texts. The messaging won't even turn on. Can anyone help?

Hello, michellefromafrica.
Thank you for visiting Apple Support Communities.
I see you have already looked at the section related to error 2006 in the second article below and the device is still unable to be restored. I would recommend trying the steps in the article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Cheers,
Jason H.

After updating to 5.0 my iphone4 crashed and won't even turn on

I updated my software.. using itunes.. everything worked fine before..
after udpating, it did the restore, then the screen went blank, and now my phone is completely DEAD~~!! I tried doing a restore from itunrs, but it won't even do that.. has anyone else experienced this problem?? What do I do... now I have no phone at all!!

Error 9: This error occurs when the device unexpectedly drops off the USB bus and communication stops. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB isolation troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Try restarting your Apple Mobile device support....http://support.apple.com/kb/ts1567
Or reinstalling the drivers....http://support.apple.com/kb/ts1538 (located in the 3rd step)

HT4623 My Apple 4s phone is frozen up and I can't do anything on it. I was updating my IOS to IOS7 as prompted to on the screen when I reached the part where it asked for an backup E-mail address. I supplied this and it froze up and won't even turn off

I received a prompt on the screen of my Iphone 4S to update my IOS to IOS7. I clicked on "Start" and went thru and supplied all the requested info. It asked me for an alternate back-up E-mail address, I entered this on the screen and when I clicked on "Next" it would go no further on this setup. Now I can't do anything because it's like it totally froze up. I can't even turn my phone off nor go forward or anything. What can I do to turn my phone off and totally stop this update???

Hi Genoc728,
Thanks for visiting Apple Support Communities.
If your iPhone is unresponsive and can't be turned off, you can reset it. See this article for the steps, and other helpful troubleshooting tips for an unresponsive device:
http://www.apple.com/support/iphone/assistant/phone/#section_1
Regards,
Jeremy

My phone won't even turn on after ios7

Similar Messages

Maybe you are looking for