My phone won't power up, and buttons at bottom of screen flashing on / off
My phone was low on charge and shut off on it's own. I did let it charge up for a while, I did not turn it on. Then later tried to power on, but it did not respond. Tried holding in the power button to power it on repeatedly to no avail. Re-plugged into the charger, and the bottom buttons began to flash on about every 4 seconds. Tried unplugging, and removing the battery, re-inserting battery. got No response when attempted to power up, but figured battery may have been too low. Plugged in - flashing. unplugged, removed battery and then replugged in - started flashing again.... screen remains off, only the 4 'buttons' at the bottom are flashing (white)
Anyone have this problem before? I will try to leave it plugged in, thinking maybe when charge is brought back up, perhaps it will work???.... but it concerns me that it continues to flash...
Any suggestions?
Thanks
Judy
Ahh! Let's ensure your device completes the power up, Judy521. How long were you allowing the device to charge? Is the device able to power up in Safe Mode? http://vz.to/19woIwa
YosefT_VZW
Follow us on Twitter @VZWSupport
Similar Messages
-
My iPhone prompted me to download the latest version of iOS7. I did, and now my phone won't power on. It just shows an iTunes icon on a black screen. When I connect my phone to iTunes on my laptop, the only option it gives me is to restore my phone's factory settings. But won't this erase all my photos, contacts, etc? Any suggestions?
It's in recovery mode. You don't have a choice. You have to restore the phone. Anything that was on it is already gone.
If you've been backing up/syncing on a regular basis, you won't lose anything except what's changed since the last backup. -
My phone won't power on. I tried holding down the power & home button for minutes at a time. Tried charging with multiple charges from multiple outlets and sources. The apple advice is telling me to upgrade the software on my phone. How am I supposed to do this if the phone won't turn on? Am I missing something here?
If the iPhone doesn't power on when connected to multiple different chargers and computers and using different USB cables, the iPhone has a hardware problem.
-
I have cisco 6945 phones connected to two Catalyst 6513-E switches in a VSS pair.
This morning, 3 phones went offline on one of the blades on switch two (they went dark).
When I do a show module, everything checks out fine --no errors on the blade. Diagnostics pass. If I connect a laptop to the ports having the issue, the system connects, fetches an IP and everything is fine. Tried different phones, cabled in directly, etc. -phones won't power.
Here is the power info for the port(s) and blade/switch:
sho power inline g2/2/15
Interface Admin Priority Oper Power(Watts) Device Class
(enabled ) From PS To PD
Gi2/2/15 auto low off 0 0 n/a n/a
Interface AdminPowerMax Police ActConsumption
(Watts)
Gi2/2/15 30.0 off n/a
Interface: Gi2/2/15
Inline Power Mode: auto
Priority: low
Operational status: off
Device Detected: no
Device Type: n/a
IEEE Class: n/a
Discovery mechanism used/configured: Ieee and Cisco
Police: off
Power Allocated
Admin Value: 30.0
Power drawn from the source: 0
Power available to the device: 0
Actual consumption
Measured at the port: n/a
Maximum Power drawn by the device since powered on: 2.6
Absent Counter: 0
Over Current Counter: 0
Short Current Counter: 0
Invalid Signature Counter: 0
Power Denied Counter: 0
UIC-DIST6513-02#sho power switch 2
Switch Number: 2
system power redundancy mode = redundant
system power total = 3795.12 Watts (90.36 Amps @ 42V)
system power used = 2560.74 Watts (60.97 Amps @ 42V)
system power available = 1234.38 Watts (29.39 Amps @ 42V)
Power-Capacity PS-Fan Output Oper
PS Type Watts A @42V Status Status State
1 WS-CAC-4000W-US 3795.12 90.36 OK OK on
2 WS-CAC-4000W-US 3795.12 90.36 OK OK on
3 none
4 none
Pwr-Allocated Oper
Fan Type Watts A @42V State
1 WS-C6513-E-FAN 375.06 8.93 OK
Pwr-Requested Pwr-Allocated Admin Oper
Slot Card-Type Watts A @42V Watts A @42V State State
1 WS-X6148E-GE-45AT 112.56 2.68 112.56 2.68 on on
2 WS-X6148E-GE-45AT 112.56 2.68 112.56 2.68 on on
3 WS-X6148E-GE-45AT 112.56 2.68 112.56 2.68 on on
4 WS-X6148E-GE-45AT 112.56 2.68 112.56 2.68 on on
5 WS-X6148E-GE-45AT 112.56 2.68 112.56 2.68 on on
6 WS-X6148E-GE-45AT 112.56 2.68 112.56 2.68 on on
7 VS-SUP2T-10G 435.54 10.37 435.54 10.37 on on
8 (Redundant Sup) - - 435.54 10.37 - -
Inline Inline Inline Inline
Pwr-Requested Pwr-Allocated Local-Pwr-Pool Power
Slot Card-Type Watts A @42V Watts A @42V Watts A @42V Status
1 WS-F6K-48-AT 3.78 0.09 4.20 0.10 34.44 0.82 On
2 WS-F6K-48-AT 80.64 1.92 88.20 2.10 34.44 0.82 On
3 WS-F6K-48-AT 91.98 2.19 100.80 2.40 34.44 0.82 On
4 WS-F6K-48-AT 88.20 2.10 96.60 2.30 34.44 0.82 On
5 WS-F6K-48-AT 76.86 1.83 42.00 1.00 34.44 0.82 On
6 WS-F6K-48-AT 91.98 2.19 100.80 2.40 34.44 0.82 On
system auxiliary power mode = off
system auxiliary power redundancy operationally = non-redundant
system primary connector power limit = 10920.00 Watts (260.00 Amps @ 42V)
system auxiliary connector power limit = 10500.00 Watts (250.00 Amps @ 42V)
system primary power used = 2560.74 Watts (60.97 Amps @ 42V)
system auxiliary power used = 0 Watt
Inline Inline-Pwr Inline-Pwr VDB
Pwr-Limit Used-Thru-Pri Used-Thru-Aux Aux-Pwr
Slot Card-Type Watts A @42V Watts A @42V Watts A @42V Capable
1 WS-F6K-48-AT 1066.80 25.40 38.64 0.92 - - Yes
2 WS-F6K-48-AT 1066.80 25.40 122.64 2.92 - - Yes
3 WS-F6K-48-AT 1066.80 25.40 135.24 3.22 - - Yes
4 WS-F6K-48-AT 1066.80 25.40 131.04 3.12 - - Yes
5 WS-F6K-48-AT 1066.80 25.40 76.44 1.82 - - Yes
6 WS-F6K-48-AT 1066.80 25.40 135.24 3.22 - - Yes
Totals: 639.24 15.22 - -
What could be happening here?Just want to put it out there that I am no "expert" on what a 61XX line card can/can't do.
Can you try to run a TDR on the line?
1. Command: test cable tdr interface g2/2/15;
2. Wait for 61 seconds for the test to run;
3. Command: sh cable tdr interface g2/2/15; and
4. Post the output to #3.
NOTE: Yes, it takes 61 seconds to run a TDR on a chassis-based system. -
my iOS6.0.1 software update was interrupted and now my phone won't switch on and it's permanently stuck on the start up apple. help please?
Connect and select iPhone in computer iTunes, in Summary page click Check for Update button.
-
Help Needed please: Phone won't power up...
Hello all. I am new here and I have a Nokia N96 which I purchased from Asia, so Nokia USA will not service my phone. I was updating firmware last night and everything froze. I patiently waited for around two hours before I disconnected the phone. Now the phone won’t power up. It vibrates a little and the light on the square control pad goes on. That’s about it. Screen and everything else is off. I tried what other people have suggested such as taking off the battery, pressing combination keys, etc. Any more suggestions or solutions for my problem. Thank you in advance for your kind assistance.
What you are thinking of doing will invalidate your warranty and as a result cannot be discussed here.
The only option available to you which won't invalidate your warranty is to send it to a Nokia Care Point which will fix it for you. Unfortunately, it will mean having to send it to Asia.
I know you have started multiple threads on this issue but telling you anymore then we already have will break the forum rules and be deleted by the moderators. You could however try asking the same question at some of the other unofficial boards. -
Since iOS 7.1 my phone won't turn on and is asking me to connect to iTunes. I connect to itunes and it says it needs to be restored. Not sure why. I try to restore it and then it says something went wrong and it won't work. So I've been without my phone for a couple days now. It gives me error code (29). The phone almost reboots and then 3/4 of the way through it gives me the error message.
If using windows...
Temporarily disable your firewall and antivirus software and try again...
http://support.apple.com/kb/TS1379
See iTunes Connection Issues here...
iTunes for Windows: Troubleshooting security software issues
NOTE:
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download -
I currently have a DROID RAZR M and I'm 1 year into my 2 year contract. Since the Kitkat update, the phone won't stay charged and it's very buggy. I know this is not Verizons fault but it's also not mine. I would like to change my phone to an iPhone 5s and keep my same plan but switch to the Edge program. Is this possible? I don't think I should have to pay an early termination fee or anything like that since my phone has become almost unusable. I know under normal circumstances you have to wait 2 yrs to upgrade but due to the update and the poor service I'm now getting I hope Verizon can make an exception. Thank you.
How recently did you switch? If it's less than 60 days, then Verizon simply reinstates your previous account. The fact that you were on the EDGE plan and mailed the devices back, and they apparently are somewhere in the system, could cause complications, and it might just work out that you just go back on the same plan and they set you up with the same devices. I'm not sure how it will go - but since you are still being billed for the devices...
-
Why did I lose my end call button at bottom of screen after last update ? I have to end a call by pushin button at top of phone
Hi dave2370,
Welcome to the Support Communities!
I'm sorry to hear you are having issues with your iPhone. The red End Call button should still be working.
For initial troubleshooting, I would suggest restarting and resetting your iPhone, and also updating it to the latest version of the iOS software, which is iOS 6.1.4.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Note: Reset your device only if you are unable to restart it.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
iOS: How to update your iPhone, iPad, or iPod touch
I hope this information helps ....
Have a great day!
- Judy -
After setting up my shaw email account on my phone, i go to mail and the Welcome to Mail screen opens with the icloud, exchange, google, etc shows. How do i get past this screen to see my actual email?
Yeah, I've done that. And the I click the mail app to try to check my mail, and that screen that I described above shows up.
-
HP Photosmart A516 keeps trying to power up and displays 07564DD6 on the screen
My HP Photosmart A 516 keeps trying to power up and displays #07564DD6 on the screen.
sunny_67 wrote:
When I press the on switch slider, the notebook shows lights then CPU fan begins to spin. It immediately slows down then stops. Power light stays on, but nothing else happens. No startup screen, nothing. To do it again, power cable must be disconnected then reconnected. Does anybody has any idea? Please help.
Once you get it to turn on, I would check to see if there is a BIOS update available for your machine. -
My Desktop Mac won't startup, it turns on to the grey screen flashing question file. I have been able to startup from the snow leopard install cd but once I try to repair within DU the disk never appears in the side panel. The only thing there is "Media"... What can I do? Help!
If Disk Utility cannot see your drive it doesn't look good.
You could try DiskWarrior. It is expensive but can often fix directory structures where DU cannot.
Replacing the drive is also a strong likelihood. If you don't have a fairly recent backup, then it might be worth buying DiskWarrior
additonal notes;
Gray screen appears during startup -
My ipod touch 4th generation has frozen whilst being turned back on. The apple logo has been on the screen and ever so often the screen flashes white and then black. How do I get it to unfreeze at this stage?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Can I recover data if my phone won't power up?
So my iphone 6 accidentally went through the wash on Monday night. I immeadately tried to dry it out in a pyrex dish of rice with a heating pad covering the dish. It was in rice for 36 hours and still won't power back up. I knew it was a long shot, but it previously worked for a iphone 3s and 4g. Any suggestions on possibly recovering this hardware or how to recover the data (no icloud storage) w/o the abilty to power the device on?
Not really - that data is gone unless the phone somehow wakes up
The conventional wisdom for the rice is 5-7 days though -
T|X won't power on - and loses time/date settings
I just bought a Palm T|X. After charging it, I set it up and then unplugged it. The problem is, it won't power up unless it's plugged in. When it does power up, the time and date settings have defaulted to 1/1/2005 00:00. However, it did keep the third party programs and contact data.
Any ideas?
Post relates to: Palm TX
This question was solved.
View Solution.One thought: Return it immediately to the store where you got it, if you just bought it, and get a replacement or your money back. .
If you can't, call Palm and send it in for repair, or if you can, replacement. Palm has a couple of bugs, one is the start button. If you can't get it to start, then it doesn't work. For what you paid, it should. The reboot (which is what is resetting your time and date) may indicate a short or other non software problem. Don't fiddle. Get rid of it, get it replaced or get it fixed.
Post relates to: Palm TX
Maybe you are looking for
-
How to add a SPACE as suffix to the last field in the downloaded text file?
Hi Experts, By using GUI_DOWNLOAD am saving the data(only 3 fields) in a text file on my desk top. fine. example current record1 : 010001 354.999 26.000 here, after 3rd field 26.000, immediately the cursor is jumping t
-
Photo albums not syncing correctly
I recently got the iPad 2 and have been setting things up and syncing everything to it tonight. My photo albums aren't syncing for some reason. I have a specific folder in my photos called "iPad" which contains subfolders with all the photos organize
-
Hi, In my application, im sending emails and in that im giving link to one of my webpage. Along with the link im passing one name as a query string. Using JavaMailAPI im setting the mail content like this MimeBodyPart mbp1 = new MimeBodyPart(); mbp1.
-
Apple has a recall on my mac's hard drive. They have asked me to back up my hard drive before they replace it.. The problem is i have never done a backup, Can anyone explain to me what it is i need to do exactly? Please be as specific as possible
-
Waiting error with BPC for Excel on Citrix
Good day, We are currently running SAP BPC 5.1 SP 7 (release 5.0.508.03) On Production and Staging , users running BPC client on our Citrix environment are experiencing a "WAITING" message when submitting on input schedules on BPC Excel after working