My phones IMEI Changed after updating firmaware wi...

Phone Name : C2-01
Product Code - 059D664
Now the Phone IMEI is 12***********?
Perfect Update was done as per the process.
What could be the solution ?
Why Nokia Can not provide Pure stuff to users..This IMEI should be hard coded in system somewhere.
Really disgusting OS Design by Nokia..
Please Provide Urgent Resolution on this.
Moderator's note: We have edited this post. IMEI was removed. It is unwise to publish this kind of information in a public forum.

Hi Sachin33,
As part of the Forum guidelines, IMEI's and other personal information are not allowed to be published. I would suggest sending us a picture of the phone with the IMEI number displayed on the screen via private message. In this way, we can further check on your concern and forward it to the relevant department for investigation. Thanks for understanding.

Similar Messages

  • Why my iPhone imei change after send repair

    Why my iPhone imei change after send repair

    They send you back a different one, a refurbished model. Your exact phone was not repaired, but instead replaced.

  • HT4972 my phone has locked  after updating , what should i do now to unlock ? now i don't live in  usa ,i live in Bangladesh and i don't have that sim that i used to . i want to use Bangladeshi sim .

    my phone has locked  after updating , what should i do now to unlock ? now i don't live in  usa ,i live in Bangladesh and i don't have that sim that i used to . i want to use Bangladeshi sim .

    The phone was hacked to unlock it. It relocked when you updated. ONLY the carrier it is locked to can authorize unlocking it. If you are not/never were an AT&T customer and you do not have an original store receipt from either an AT&T or Apple store in the U.S. for a no commitment AT&T iPhone, they will NOT unlock it.
    Buy a new phone.

  • Re: Personal Account number changed after update

    Personal Account number changed after updating Virtualstore and now I can't login with my current account information. Changed from 35482 to 35555

    i have created already an account after reset but then asked for an update. I did it and now asks for username and password :) still says incorrect username/pass

  • My phone was locked after updating ios 5.0

    my phone was locked after updating ios 5.0 can i get backto normal

    Charge it with a wall charger for at least 30 minutes.  Then, hold the on/off switch and home button together for at least 15 seconds untill you see the Apple Logo.
    Hope that works.

  • HT4623 What do I do to fix my phone that crashed after updating?

    What do I do to fix my phone that crashed after updating?

    Try placing the iPd in DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    And then, if necessary try:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    or
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • Phone not working after update volume. Battery life resets on own

    Ever since last ISO update phone not working right. Looses volume. Shuts off   Battery life went out to lunch. Texting slow. Any fix yet I see lots of issues. And tec support wants to charge as phone is off warranty. Was working finè before update.
    Very sad customer

    Hello 2canoes and welcome to the BlackBerry Support Community Forums.
    Sorry to hear you're experiencing issues with your device after updating your software.
    It's recommended you contact your mobile service provider for investigation on this matter and to open a support ticket with BlackBerry technical support.
    Thanks!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Language change after update to Lightroom 3.2! Help asked!

    I use Lightroom from the first version and love to work with it. I always work with the English version of it - for several reasons - even when my Windows XP version is in Dutch.
    By upgrading to Lightroom 3.2 I selected the English language. After the update my version of Lightroom 3.2 however was in Dutch. I tried to change that to English following the help file, but that does not work
    This unwanted change gives me a lot of trouble now as I normally import my pictures with a filename in the date-number format. But the date format in the Dutch version is day-month-year, as I however want to use - and used for over 50.000 pictures!!! - the year-month-day format. I had no trouble with it in Lightroom 3.0. My trouble began after updating to Lightroom 3.2.
    Can anyone help me here, as I cannot import pictures I made in the right format now!!!
    Ton Soneveldt

    The answers is in this thread: http://forums.adobe.com/message/3042985#3042985.

  • Screen brightness not changing after update to windows 10

    Hello, After updating to windows 10, I am no longer able to adjust the screen brightness at all.  It is stuck on the brightest setting at all times; which is inconvenient when I am on battery power and need it dimmed. The f2 and f3 buttons are not working to adjust the brightness, and I am unable to change it in power/power plan settings. I attempted to search for a possible missing driver that I had maybe lost upon updating, but there are yet no drivers for my product on the HP website for this purpose. Any help on this matter is extremely appreciated, as it is rather frustrating that I can't change my screen brightness. Thanks.

    How about using the snipping tool to create an image of what you do see and posting it here.  The snipping tool is what I used to create the image that I posted.  What version of Windows 10 is installed?  I upgraded to Windows 10 Pro on the Omen 15 and have the Enterprise version on one of my desktop systems. I have not yet used the HOme or Education versions, so I do not yet know which features they lack. 

  • Hda and hdb changes after updating

    Hello,
    i've reinstalled my "main computer" a few weeks ago after using it for a year or so with OpenBSD. The System is an old IBM Server which i got used a year ago.
    I've installed archlinux on an SCSI disk which hangs on an onboard-LSI-Controller.
    There is also a bit SATA-Disk which hangs on an PCI-addon-SATA-Controller with an SIL chipset.
    Yesterday i've updatet my System with pacman -Syu, and shut it down yesterday evening. This morning my system won't boot, fsck said "Bad Superblock" or so on sda3 which contains my / filesystem. After a few tries i found out that sda which was my scsi system disk and sdb which was my "big" sata drive switched the letters, so after changing the letters in the fstab, everything works fine now, but i'm a bit confused, as i had never such an issue after updating before.
    Is this perhaps a bug that i should post anywhere? Or have i missed a threat or a news anywhere that announced this behavior?
    Thanks a lot!

    The advice these days is to use uuids which are unique to each volume to avoid these types of problems. the wiki on fstab tells you how. No idea why you experienced this though.

  • My phone not active after update

    my phone not active after update

    The servers are getting slammed. Bunch of people trying to download iOS7 at the same time.
    There is a chance activation servers might be down/slow for now. Just keep trying throughout the day. Some other forum users are experieincing similar things.
    You can also try the apple document for activation issues, but I'd assume its server issues. http://support.apple.com/kb/ts3424

  • IEME number of Nokia Asha 501 changed after updati...

    hi...i updated my nokia asha 501, but after udating my IEME number is changed...plzzz tel me the solution

    Hamadhasan89,
    Can you please counter-check then present IMEI shown on the phone and on its retail box?
    IMEI values may show two different sets.

  • Language Changed after update

    I've seen some really competent people in this forum and I decided to submit my problem.
    I've just updated my phone software with the nokia utility software but now the language is changed. I can only choose between English, French and German on both menu and writing.
    The problem is that I'm Italian, the previous software version was italian and of course I've bought my Nokia 6680 LEGALLY here in Italy (in a "nokia point" by the way).
    I can easily manage an english language phone, of course, but some of my friends will have some hard time translating my english, T9-provided short messages.
    Phone details:
    Model: 6680
    Type: RM-36
    Code: 0520999
    FCC ID: PDNRM-36
    Any suggestion?

    If you lost the language, it was still an unauthorized/illegal import, as the update updates the phone with those languages that were put on the phone when the phone was manufactured.
    In other words, the "nokia point" got that phone from somewhere else than ordering it from Nokia directly (otherwise they would have gotten devices with Italian that retained Italian after using NSU).
    You could go back there and ask them to fix the phone, or give you a new one with Italian.

  • Time format change after update to 4.0.7577.250 on aastra 6725ip

    Hi,
    i make an device update on my aastra 6725ip to version 4.0.7577.250.
    After that update the time format is changed. I found in the changelog that this should be fixed?!
    What todo?
    regards,
    Frank

    Whats the format changed to?
    Can you use settings to change the format? Or do factory reset on phone (hold 4 and 6 while booting).
    Andrew Morpeth
    Lync Server Specialist - Auckland, NZ
    Check out my blog

  • 6300 Contacts cannot be changed after update to fi...

    Hi, I updated the firmware and since then I cannot change an existing contact.
    Has anybody else experienced that problem?
    Best,
    schottide

    Hi,
    I found a solution myself. Now my contacts can by synchronized.
    Here are the steps I made to get rid of "corrupt" contacts:
    - udate firmware to version 5
    - make sure you use the phones memory for contacts
    - look at: Contacts -> Settings -> Memory in use
    - move all contacts from phone to SIM card
    - Names -> Options -> Mark all
    - Options -> Move marked
    (If you have more than 100 contacts its ok, only 1000 will be moved)
    - change phones memory for contacts to SIM
    - Contacts -> Settings -> Memory in use -> Sim Card
    - move all contacts from SIM card to phone
    - Names -> Options -> Mark all
    - Options -> Move marked
    - change phones memory for contacts to phone
    - Contacts -> Settings -> Memory in use -> Phone
    After I did that, I can now sync my contacts...
    Disadvantage: If you have more than one telephone-number associated to a contact it will be split into several contacts. E.g. Tom Miller will bei Tom Miller1 Tom Miller2. But this can be easily changed on the pc afterwards...
    schottide

Maybe you are looking for

  • CIN related error at the time of GRN

    Hi experts, We have recd an imported consignment for one item - qty 130 MT.  Initially the qty was shifted to custom bonded warehouse.  We are receiving it partially in Lots at our plant as per our requirement.  The invoice no. is 1284 .  We have rec

  • Problem with printing ever since I've changed the yellow cartridge ink

    Hello, I have the new printer - HP Ink Advantage 3525 that was working great. I got a message on my PC which says that I need to change the yellow cartridge one, so I did it very easily, but even since I get tons of problems with my printer. The comm

  • Using variable in KM configuration

    Hi, I am using LKM that uses sqlldr oracle utility to load data. I don't want to use hard coded path in LKM configuration. e.g defalut directory = /root/home/ I defined a variable V_SQLDR_DIR to store this path. The value for variable is not resolved

  • Error type 2002300

    Hi.  I've got my program working fairly well in labview, but when I build it I'm having a problem.  In the built software(exe), one of my VIs will not run.  Everything else runs fine.  When I open it's front panel, it has a broken arrow and if I pres

  • How to saperate 543 and 101 while doing GR against subcontracting PO?

    Hi all,      As you know,while doing GR against subcontracting PO ,the Mvt type 543 will be following  with 101. My requirement is that, when doing GR, i want the Mvt type 543 not post with 101. Of course, if i don't active  the checkbox of the compo