My Photo Booth is not working. There is no connected camera. Help, anyone?

I have been having this problem for weeks now and I hope some people here will be able to help me.
I just bought my MacBook Pro 13" about 6 months ago and I rarely use it because I still have my old MacBook with me. Recently, my Photo Booth won't work. It says, "There is no connected camera." Can anyone help me? Is there something to do with iSight? Tell me what should I do?
Help is much appreciated. Thank you.

Use the suggestions here:  http://support.apple.com/kb/HT2090
The SMC reset often fixes your problem.  Be sure you follow the instructions for your particular Mac model.

Similar Messages

  • My camera not working.i can't open photo booth it says that there is no connected camera

    my camera not working.i can't open photo booth it says that there is no connected camera

    Use the suggestions here:  http://support.apple.com/kb/HT2090
    The SMC reset often fixes your problem.  Be sure you follow the instructions for your particular Mac model.

  • Photo Booth flash not working in Maverick or Yosemite

    I have noticed that the photo booth flash in Maverick on my Macbook Pro and in Yosemite on my iMac is not working Screen flash is enabled on both.
    So this is happening on two different computers. Does anyone know how to fix this? All my photos are so dark on both of my computers using Maverick and Macbook Pro.
    It works fine on system 10.6.8 though.
    Has anyone else had this problem too?
    Martha

    In case anyone is interested in your screen flash not working in the Yosemite or Maverick photo booth application, I finally called Apple today and he kept insisting it was working on his - I asked him to take a pic with the screen flash enabled and then disable it and he said it came out the same. And rationalized that it was because he was in a well lit room. I kept telling him in my old photo booth from system 10.6.8 that my face was lit up and my husband had reflections from his glasses so we went from him wanting me to reinstall my software (I refused since both computers were having the same problem - one using Yosemite and the other using Maverick)  to him finally going into HIS partitioned disk that has system 10.6.8 on it to discover that the flash there reflected off HIS glasses too. Bottom line is he admitted there has to be some flaw that prevented the photo booth flash from working for Maverick and Yosemite. Whew, finally validation!
    Martha

  • Photo Booth Effect not working

    I upgraded to 10.4.8 and 75% of my Photo Booth effects stopped working. There is only a blank screen instead of a camera image. Has anyone else experienced this problem. Photo Booth worked great before the upgrade. I have a 20" iMac intel. Any suggestions would be appreciated!
    iMac   Mac OS X (10.4.8)  

    Hi OH~IO,
    Welcome to the Apple Discussions
    First try Repairing Permissions, with the Disk Utility in Applications/Utilities. This will read your Receipts folder for the latest Permissions based on the Updates.
    Next, if that does not work try deleting com.apple.Photobooth.plist for your Home/library/Preferences Folder and restarting Photo Booth.
    6:25 PM Wednesday; November 22, 2006

  • Photo Booth backgrounds not working

    My backgrounds in Photo Booth don't seem to be working right, assuming I'm doing it right. I can't find any kind of tutorial on it on the Apple web site. When I choose the background, and it says to step out of the frame, I do so, but then when I return to the frame, my face is totally pixelated and some of the surrounding background bleeds through. What I am doing wrong?

    Everyone is having this problem.
    Yes the demo on the apple website looks perfect, but not for us who try it.
    It doesn't matter if you have bags of memory, fast processor, everyone still gets this problem. Some have improved the situation by moving and changing lights to different positions or put a plain background behind them. But overall pixelated and holes appear. Hopefully there will be a fix for this.

  • Photo Booth backdrops not working?? Help

    My Photobooth that was built into my Macbook Pro and it was working perfectly at first. I got my Macbook for christmas, it was brand new and one day the backdrops stopped working for some reason. I will use a back drop and get out the frame as it tells you to do and it will say background detected straight away. They when I step back into the frame it will not detect me? It just has the backdrop of what have chosen and no me? I have had a plain background behind me, no mirrors and relective stuff around me, I just want to know how I can get the backdrops back to normal. If you could help that would be great x

    Save your photos you have in thumbnails to another folder.
    Quit Photo Booth.
    Go to your Finder "Go" menu hold the option key to choose "Library" (this reveals the hidden user library in Lion)
    Then go to Preferences/com.apple.PhotoBooth.plist and drag that file to your Desktop.
    Relaunch Photo Booth.

  • Photo booth does not work in mountain lion?

    When I try to run the photo booth app. It will not load in mountain lion, the camera light comes on and sometimes it opens with a red screen. Any one else have this issue?

    This is what I get in the console...
    08/11/2012 18:18:44.200 spindump[7458]: Saved hang report for Photo Booth version 5.0.1 (307) to /Library/Logs/DiagnosticReports/Photo Booth_2012-11-08-181844_Macintosh.hang
    08/11/2012 18:18:50.977 Photo Booth[7475]: Initializer-based scripting additions are no longer supported. "/Library/ScriptingAdditions/LCC Scroll Enhancer Loader.osax" not loaded.
    08/11/2012 18:18:50.978 Photo Booth[7475]: Error loading /Library/ScriptingAdditions/QXPScriptingAdditions.osax/Contents/MacOS/QXPScript ingAdditions:  dlopen(/Library/ScriptingAdditions/QXPScriptingAdditions.osax/Contents/MacOS/QX PScriptingAdditions, 262): no suitable image found.  Did find:
        /Library/ScriptingAdditions/QXPScriptingAdditions.osax/Contents/MacOS/QXPScript ingAdditions: mach-o, but wrong architecture
    08/11/2012 18:18:51.305 Photo Booth[7475]: *** EXCEPTION IGNORED: -[QCParameterInfo initWithType:size:]: Argument "aSize" does not verify "((aSize > 0) && (aType != kQCProgrammableType_Skip)) || ((aSize == 0) && (aType == kQCProgrammableType_Skip))"
    08/11/2012 18:18:51.306 Photo Booth[7475]: *** Failed creating composition from "/System/Library/Compositions/Mesh Bulge.qtz"
    08/11/2012 18:18:51.996 quicklookd[7477]: [QL] Can't get plugin bundle info at XTUM/ -- file://localhost/private/tmp/
    08/11/2012 18:18:52.583 Photo Booth[7475]: *** EXCEPTION IGNORED: -[QCParameterInfo initWithType:size:]: Argument "aSize" does not verify "((aSize > 0) && (aType != kQCProgrammableType_Skip)) || ((aSize == 0) && (aType == kQCProgrammableType_Skip))"
    08/11/2012 18:18:52.613 Photo Booth[7475]: *** Failed creating composition from "/System/Library/Compositions/Mesh Jiggle.qtz"
    08/11/2012 18:18:52.620 Photo Booth[7475]: *** EXCEPTION IGNORED: -[QCParameterInfo initWithType:size:]: Argument "aSize" does not verify "((aSize > 0) && (aType != kQCProgrammableType_Skip)) || ((aSize == 0) && (aType == kQCProgrammableType_Skip))"
    08/11/2012 18:18:52.620 Photo Booth[7475]: *** Failed creating composition from "/System/Library/Compositions/Mesh Noise.qtz"
    08/11/2012 18:18:52.626 Photo Booth[7475]: *** EXCEPTION IGNORED: -[QCParameterInfo initWithType:size:]: Argument "aSize" does not verify "((aSize > 0) && (aType != kQCProgrammableType_Skip)) || ((aSize == 0) && (aType == kQCProgrammableType_Skip))"
    08/11/2012 18:18:52.627 Photo Booth[7475]: *** Failed creating composition from "/System/Library/Compositions/Mesh Twist.qtz"
    08/11/2012 18:18:52.631 Photo Booth[7475]: *** EXCEPTION IGNORED: -[QCParameterInfo initWithType:size:]: Argument "aSize" does not verify "((aSize > 0) && (aType != kQCProgrammableType_Skip)) || ((aSize == 0) && (aType == kQCProgrammableType_Skip))"
    08/11/2012 18:18:52.632 Photo Booth[7475]: *** Failed creating composition from "/System/Library/Compositions/Mesh Wave.qtz"
    08/11/2012 18:18:52.690 Photo Booth[7475]: CoreAnimation: warning, deleted thread with uncommitted CATransaction; set CA_DEBUG_TRANSACTIONS=1 in environment to log backtraces.

  • Can you help? photo booth effect not working properly.

    The pop art effect is no longer working on my mom's G5. It only shows a pic in the upper left rahter than the four it used to show: upper left, upper right, lower left and lower right.

    parp,
    You don't mention which model of G5 your mother has.
    However, you need to install a "fresh" copy of the Photo Booth application from the install DVD or a working copy from another machine.
    Mine POP ART effect stopped working like you mentioned with only the one photo in the upper left. I deleted that copy of the Photo Booth application and installed a fresh one. Now all 4 or the photos are showing.

  • Photo Booth is not working

    I have used photo booth in the past but now when I click on its icon in the dock, nothing happens. Any ideas please?

    Thankyou for your reply. I followed your advice and downloaded pacifist and then went in search of the missing files. They were found and I installed them BUT, when I restarted my computer, I had encountered a major problem. The computer continuously flashed the finder and desktop windows and was totally unresponsive to any commands. The only way to stop was to hold down the power button. On restart, the same problem existed - weird! In desperation, I reloaded Mac OS and the problems have gone. I even have PhotoBooth back.
    One final question. Can I now delete the 'Previous System Folder' that was created during the reload of the system software?
    Thanks again to you and Aqua for your support and patience.

  • Photo booth flash not working on mavericks

    the flash is not working please help out

    yes and i am able to see the flash on the screen (as it goes white) but not in the pic.........and yeah your way didnt work......but thx for the rply

  • I asked you last week how i can remove my foto's from the first IPad model,your answer is:connect the IPAD with your pc etc....but that's not working there is no connection,i dont find the IPad in my "computer"( as an extern object) but in my"printers"  .

    hello ! message to APPLE 
    sorry for my englisch,I speak Netherlands......
    I did everything what you told me in your last mail.......but it's not working,my laptop cannot find the IPad in the "my computer" program;but it finds an "not known I Pad" as on "strang object " in the  map for :  "apparaten and printers" !!!!
    my laptop does not reconigze my IPad !
    It is a big problem ,that nobody in the 3 years that I have thid IPad.....can help me  iiiiii
    I ask this now the last time I think......and maybe I can write to a journalist to put this in the newspaper,........maybe so comes help from the media
    anna-louisa

    We are fellow users here on these forums, you're not talking to iTunes Support nor Apple.
    How did the photos get onto the iPad ? An iPad will only show in Windows Explorer if there are photos on it that were taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites - if the only photos on it were synced to the iPad from a computer then the iPad will not show in Explorer.
    That is the computer that the iPad is synced to ?
    If they were originally synced to your iPad from a computer then to remove them from your iPad connect your iPad to your computer and select it on the left-hand sidebar of your computer's iTunes under 'devices' (you can enable the sidebar via control-S on a PC)
    And then use the Photos tab on the right-hand side of the screen to remove them
    To remove all synced photos select an empty folder on that tab and sync that.

  • Photo booth doesn't work, the built in web cam stopped functioning

    hey guys
    i've just purchased macbook pro and the built in camera stopped working, when i open the photo booth application, i see a green screen, and the photo it takes is all green.
    it worked yesterday, and now it doesn't
    i've searched the entire system for a solution but couldn't find any
    if you know what to do - please please help me
    this is so depressing
    thanks in advance
    and have a great day
    Gianfranco
    macbook pro Mac OS X (10.4.10) 17"
    macbook pro   Mac OS X (10.4.10)  

    Try this
    http://docs.info.apple.com/article.html?artnum=93240
    and try a reboot.
    Best of luck.

  • Facetime and Photo Booth will not work in my regular user account.

    The camera is not recognized.  In Facetime preferences is greyed out.  If I switch accounts it works fine. What now?

    If it works with the other account, the Flash Player is installed and able to work properly.
    There's something with the admin account that's blocking it.
    What that could be, is not possible to troubleshoot in a forum environment, unfortunately.

  • I installed Lion and now photo booth does not work

    It says I have to reinstall it again. How do I do that?

    I am also having continual issues with my WiFi connection using my MacBook after installing Lion.  It will work sometimes, for a while, but will drop connection unexpectedly.  It worked fine with Snow Leopard and my husband has no problem connecting to our network with his PC running Windows 7, so I know it's not our router/modem/internet provider.
    I installed the latest OS update that claimed to resolve Airport issues, but it actually appears to have more dificulty connecting than before.  What the ****, Apple?  I use my computer for school and business; not having a reliable connection to my wireless internet is a HUGE inconvenience, disappointment, annoyance, and problem.

  • Photo booth is not working properly,

    when i first started up it the video moves really slow, then it just freezes on a certain fixed image.. or it just opens with a black screen not even showing any type of video

    Restart Mac.  If problem persists, try  all applicable suggestions in http://support.apple.com/kb/HT2090
    If ALL apps are running slow, check hard disk space available (you need many GB free) and use Disk Utility to "repair permissions" & "verify disk".

Maybe you are looking for