My photo is awful in photoshop CC and alright in lightroom? WhY?

When I'm in lightroom and ask to modify in photoshop CC the photo in photoshop is very awful and a lot of noise? I don't understand. It is happened after the new update. But I needed this update for my canon 7D mark2.
what can I do now.. I also updated camera raw. I asked friends and they didn't have this problem.

I did the last update for PSCC, LR, Camera raw. I wanted to update the creative cloud because I don't know what is ARC and don't find Bridge. So I thought that if I update all creative cloud i will be ok. But when I try to update CC I always have a code error 50

Similar Messages

My photos all open in bright red and green only. Why?

My photos all open in bright red and green only. Why?

Well, you didn't give us much information.
Operating system, Windows or Mac?
Which version of Elements?
What happens when you open a picture file in another application?
Have you edited there picture files?
What are the file types that you opening, JPEG, PSD, TIFF, PDF?
Go to Image Menu in Editor>Mode. Is RGB Color ticked?
Anything else that you tell us?

Problems with running Photoshop CS6 and Bridge with Lightroom 4 also on the same PC

I was running Photoshop and Bridge, then purchased Lightroom 4. Before installingt 4 I had no problems with Bridge, but since installing 4 all of the photo's that were held in bridge are now gone, but they are in Lightroom. With Lightroom, you are able to edit photos out of Lightroom and into Photoshop when necessary, save and close and it automatically changed the Lightroom picture.
I have two PC's, one has Bridge on it (this one) and the other without, but both have both editing prgrams installed. On the other PC I can switch between Lightroom and Photoshop with no problems, but when I try to switch with this PC, the one with Bridge installed, it will open Photoshop, but the photo will not transfer. If I close Photoshop program and go back to Lightroom, it will tell me that the picture could not be transfered to Photoshop because it would not launch. If I close that message window, it will then launch Photoshop and the picture transferes over allowing me to edit and save as normal.
My question is; does anyone know if Lightroom and Bridge should run side by side, or should I delete Bridge from this PC and see what happens. Bridge is just a holder and organizer of photos, wherease Lightroom does the same, but also has post editing capabilities. The two programs seem redundant, but if your running Photoshop, it's hard to get files out of Lightroom. It seems that you need to open Lightroom first, then you can view and chose a photo to work on, then move it back and forth between the two programs. This seems to make Bridge redundant.
Thanks for any help or suggestions.
he_b_gb1947

Hi, Yes, but that actually wasn't the problem. I start out in Lightroom,
then move to Photoshop if I have something that can't be fixed in
Lightroom. The problem was that when I tried to edit, out of Lightroom and
into Photoshop, I was getting an error message that Lightroom couldn't
prepare files for transfer because Photoshop wouldn't open. But, it had
opened, the picture just wouldn't transfer. If I closed Photoshop,
Lightroom would try again and it would open and transfer the second time. I
ended up going to the Adobe help, chat line, and they looked into my PC and
located the problem, it's now working fine. Thanks to everyone for your
inputs. Most appreciated.
Gary

Photos look awful in Photoshop & Bridge but fine in all other programs; how can i fix this?

I just got a new windows 7 64-bit laptop (Sony Vaio vpcf226fm/b) and installed photoshop cs5 extended on it and began to look through some of my photos with Bridge and notied that they were all very washed out and desaturated. In addition, certain parts of some of the pictures were very low-resolution...I'm not exactly sure how to describe it, but darker parts of the photos would have the same sort of effect you get when saving an gif image at very low quality. Id take a screenshot but unfortunately am not at home right now. Anyway, I thought the laptop might be messed up but the same pictures look fine when viewed in any other program...its just photoshop and bridge that they appear so poorly in. I messed around with the color settings but couldn't make much progress...finally the only thing that I found to work was, with an image open, to go to View - Proof Colors and that would make the photo appear the same as in the rest of the programs, without the washed out/desaturated look and without the lo-resolution areas. I can't find a way to make that stick, though, or a way to apply it to Bridge.
So what can I do? And what's likely to be causing this in the first place?

Alright, I'm back home now.
Here's what I mean about the major difference in saturation...the top photo is a screenshot from Canon's Zoombrowser software and the bottom photo is a screenshot of the same photo in Adobe Bridge CS5:
As you can see, there's also a greyish/bluish tint when viewed with Photoshop/Bridge as well.
And here's what I mean about parts of some of the photos being very low-resolution...you can see it especially well in this underexposed photo (the lower left and right corners and the edges of the clouds), again Zoombrowser on top and Bridge on the bottom:
What are your Edit > Color Settings? (A screenshot might be more convenient than typing it up.)
Have the images been saved with the ICC-Profiles embedded or not?
Here's a screenshot of the color settings:
Also, the images haven't been saved by anything else before, they're straight off the camera, unedited.
How have you calibrated your display? And have you changed your display controls since it was calibrated?
Basically, this is a symptom of your display profile not matching your display, and it'll only affect color managed applications that rely on the display profile.
I haven't calibrated the display and wasn't really planning to since it's a laptop and is going to be used mainly for photo and video viewing rather than editing; my desktop is what I do almost all my editing work with, but since this laptop is new and much faster I was planning on using it to sort through and organize all my hundreds of thousands of photos, then transfer that selection to my desktop for post-processing. However, it's still important that I have a fairly accurate display on the laptop since I don't want to delete something that looks bad if it turns out that it only looked bad because of the laptop's display.
I put the new laptop next to my desktop's monitor and then borrowed two other laptops and put those on the same table too and had all four computers display the same image; the laptop was clearly the odd one out both when viewing the image in Photoshop as well as when viewing it in Zoombrowser. In Zoombrowser it was far more bright and saturated than the other 3 displays and in Photoshop it was far less saturated than the other 3, plus it had low-resolution areas like in the second screenshot whereas the other 3 did not...so I'm not sure what to do now. The non-color managed photos are apparently being displayed inaccurately by being overly bright and saturated and the color-managed photos are being displayed inaccurately by being too desaturated plus having lo-res areas. Any help?

Photo tag hierarchies in Photoshop Elemets and Express

Hi,
I'm looking for a software to use to reorganise my photos using a tag hierarchy, but need something that will be useable on pcs, iPads, iPhones.
I have read that Elements allows you to set this up, but can anyone tell me if this functionality is carried across to Express for use on iPads/iPhones?
Many thanks

Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements

Why is "Photos" so awful? iPhoto was simple, intuitive, easy to organize and use. Photos is the opposite of that.

Why is "Photos" so awful? iPhoto was simple, intuitive, easy to organize and use. Photos is the opposite of that.

pjonesCET1 wrote:
You can't once installed you can't use iPhoto, anymore in fact I think it is physically removed when you install the 10.10.3 Update.
Incorrect. iPhotos is not removed at all. It can still be used as long as you have kept your Software up to date. Otherwise
Is Iphoto gone ? i want it back!
Pete

In the past I was using Photoshop 7 to make Web Photo Gallery. My friend could right click on the pictures from my website and save it in their computer. Recently I have bought and registered your Lightroom 5 and have updated it to 5.6. But can not progr

In the past I was using Photoshop 7 to make Web Photo Gallery. My friend could right click on the pictures from my website and save it in their computer.
Recently I have bought and registered your Lightroom 5 and have updated it to 5.6. But can not program it to create Photo Web Galleries that after uploading to my website would allow my friends to down load the pictures from the album to their computer. How could I do it? Please step by step. Thank you M. Mehdi Akhavein

Are you producing HTML galleries with Lightroom (not Flash galleries)?
Lightroom Help | Create web galleries in Lightroom

I'm new to Photoshop Elements and just getting started. While in the organizer I have one group of photos up to learn with and now it says Edit in Progress with a padlock icon. How can I remove this so that the photos will be restored to normal?

I'm new to Photoshop Elements and just getting started. While in the organizer I have one group of photos up to learn with and now it says Edit in Progress with a padlock icon. How can I remove this so that the photos will be restored to normal?

Go back to the editor and close the photo there.

I have photoshop cc and a mac book pro. I cannot access my photos from photoshop. I can go to iPhoto and click edit to edit them in photoshop, but photoshop won't open them. I want to do a collage, so I need to get to more than one photo.

I have photoshop cc and a mac book pro. I cannot access my photos from photoshop. I can go to iPhoto and click edit to edit them in photoshop, but photoshop won't open them. I want to do a collage, so I need to get to more than one photo.

See if exporting them helps:
Exporting From iPhoto | Apple Support Communities
Gene

I was loading a big file of photos from iPhoto to Adobe Photoshop CS3 and it keep collapsing, yet each time I reopen photoshop it load the photos again and cal laps again. is there a way to stop this cycle?

I was loading a big file of photos from iPhoto to Adobe Photoshop CS3 and more then midway it keep collapsing, yet each time I re-open photoshop to load a small amount of photos, it load the previous photos again, and again it collapse. is there a way to stop this cycle and start a new?

http://helpx.adobe.com/photoshop.html

Am I correct that Photos does not support external editors? i.e., in Aperture, I click Photos Edit with.... and can open in Photoshop or various plug-ins. Changes are then automatically saved back to Aperture. Nonexistent in Photos?

Am I correct that Photos does not support external editors? i.e., in Aperture, I click Photos > Edit with.... and can open in Photoshop or various plug-ins. Changes are then automatically saved back to Aperture. Nonexistent in Photos?

Thanks Larry. That certainly gives me some understanding. Can't imagine I'm the only Aperture user with that concern, so I certainly hope Adobe and others will fill the void. Without that feature, Photos is pretty much a non-started for me.

Wanting to use Photoshop CS6 to open images directly from iPhoto 11. Using OSX10.8.2 and iPhoto 11. Just installed Photoshop CS6 and want to open images directly from iPhoto. Before I installed PS I was not able to edit photos in iPhoto 11. Nothing

Wanting to use Photoshop CS6 to open images directly from iPhoto 11.
Using OSX10.8.2 and iPhoto 11. Just installed Photoshop CS6 and want to open
images directly from iPhoto. Before I installed PS I was not able to edit photos
in iPhoto 11. Nothing happens when I click on ‘edit‘ it is blank.
And now it will not work using Photoshop CS6 either.
From Help Center I have gone to iPhoto/Preferences/ Advanced and chosen Photoshop CS6 to Edit Photos but then cannot find an 'Open' to click? Perhaps this is the problem?
When I select a photo in iPhoto and click the Edit button - nothing happens.
Please advise. Glenys

This may be of help to you:
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT

My brushes won't work - they stay attached to the cursor and won't stay on the photo. I have Photoshop Elements 13 and have had varous problems since installation. Anyone have any ideas re my 'brushes'?

my brushes won't work - they stay attached to the cursor and won't stay on the photo. I have Photoshop Elements 13 and have had varous problems since installation. Anyone have any ideas re my 'brushes'?

<moved from Downloading, Installing, Setting Up to Photoshop Elements>

I am willing to buy a i mac 21" ,i will use it to edit photos using photoshop cs6 and lightroom 4 is the graphic card 512mb will be enough for my work ? wich one ishould go for thanks

i am willing to buy a i mac 21" , i will use itfor photo editing using photoshop cs6 and adobe lightroom 4 , is the graphic card will be enough ? any recomandation , wich i mac should i buy ,thanks for your help.

Mercury Graphics Engine
The Mercury Graphics Engine (MGE) represents features that use video card processor, or GPU, acceleration. In Photoshop CS6, this new engine delivers near-instant results when editing with key tools such as Liquify, Warp, Lighting Effects, and the Oil Paint filter. The new MGE delivers unprecedented responsiveness for a fluid feel as you work.
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq.html

Im trying to use magic bullet photo looks with photoshop CC and everytime i use photolooks photoshop crashes and closes

Im trying to use magic bullet photo looks with photoshop CC and everytime i use photolooks photoshop crashes and closes

If Photoshop runs OK otherwise, then the problem is with the plugin
Red Giant - Products - Magic Bullet PhotoLooks 2.0 - Compatibility

My photo is awful in photoshop CC and alright in lightroom? WhY?

Similar Messages

Maybe you are looking for