My photos look terrible in the library module after editing in the develop module. They look nothing alike. How do I solve this issue? Using Lightroom 5.
anyone have any ideas? The only way I can get around this is export the photo back into iPhoto and try to edit out the mess.
The waves you are seeing on your monitor must be more pronounced than what I'm seeing in the posted screenshots. The Library module uses Adobe RGB AND 8-bit JPEG preview images, which can cause banding in fine gradient areas (compared to Develop view), but I'm not seeing a huge difference in your screenshots. Here's a screen shot with my non-wide gamut monitor calibration profile. If my screenshot shows less banding than what you are seeing with the original images it indicates a monitor profile issue as described by twenty-one. A hardware calibrated monitor is recommended to prevent these types of issues.
The Library image also appears lighter in the shadow area, which probably indicates more Luminance NR needs to be applied or perhaps less sharpening. Try it and see if that helps with the issue.
Similar Messages
-
Hi, I am using "Avenir Heavy" font in my iOS 6 app but when I run it on iOS5 the label on which I am placing Avenir fonts changes lot and I am not getting proper look n feel. How can I solve this issue ?
Post your question on the Developer forums: http://devforums.apple..com
-
I have deleted all my videos songs and photos from my iphone 4 but when i connect to itunes it still shows 17gb free. how can I solve this issue without restore. Total storage of my iphone is 32 gb.
I don't see an issue, but if you mean why didn't you get most of your memory back you need to see what else is using storage. Go to Settings/General/Usage. Wait a bit for it to calculate storage allocation, then when it finishes you can see how much storage each app uses.
-
I'm trying to sync a new iphone into i tunes. I'm getting a message that says that this iphone cannot be used because the apple mobile device service is not started. Any idea what I can do to solve this issue?
See Here...
AMDS for Windows
http://support.apple.com/kb/TS1567
AMDS for Mac
http://support.apple.com/kb/ht1747 -
I was updating my ipad2 to iOS.5 version, and somehow the iPad turned of and the update was not finished. When i turned on the iPad the computer nor iTunes could recognize the iPad. I have windows xp. How can I solve this issue?
Try throwing it into recovery mode and starting over.
http://support.apple.com/kb/ht4097 -
when i connect my ipad to my Mac to update the ipad to IOS7 nothing happen. how can i solve this problem Many thanks, Paul
Can your iPad be upgraded to iOS 7? If so, what are you doing that isn't working?
See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1.x
iPhone 4 iOS 7.0.x
iPhone 4S iOS 7.0.x
iPhone 5 iOS 7.0.x
iPhone 5c iOS 7.0.x
iPhone 5s iOS 7.0.x
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1.x
iPod Touch 5 iOS 7.0.x
iPad 1 iOS 5.1.1
iPad 2 iOS 7.0.x
iPad 3 iOS 7.0.x
iPad 4 iOS 7.0.x
iPad Mini iOS 7.0.x
iPad Air iOS 7.0.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS to Version 6.0.x from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
Hi, I created a new user on mac, Admin but I can't use adobe CS6 while the original user is admin too and all programs are running normal. How can I solve this problem?
Hi Amanda,
Software applications are usually installed in the Applications folder on the Macintosh HD and are accessible to all users.
I would advise you to check the Applications folder and see if your software is in there.
Next step would be to Control Click or Right Click on the application and choose "Get Info" and make sure the permissions are set to "Read & Write" for all users. The article below provides more details:
Troubleshooting permissions issues in Mac OS X
http://support.apple.com/kb/ht2963
You may need to contact Adobe Support if this does not resolve your issue:
http://helpx.adobe.com/photoshop.html
Hope this information helps!
- Judy -
The Yahoo password in the mail setting on all my apple devices - iPad, iPhone 5, mini iPad - has permanently reverted to an old version. I have tried all the suggestions provided by the community so far but nothing works. When I delete the account and re-enter the details, the updated password is recognised and seems to save but, when I go back into the account, the old password is the one that is there.
I am desperate! How can I solve this issue please?See:
How to use multiple iPods, iPads, or iPhones with one computer
What is the best way to manage multiple...: Apple Support Communities -
What is this Configuration Error: 1 = I must reinstall the AI every time again and again and loose so much time! How can I solve this error?
please answer on my email too
[email protected]Nobody can tell you anything without proper system info or other technical details. The simply answer probably is that you are running your system with insufficient user privileges and system restore or some security tools are blocking stuff/ erasing your install.
Mylenium -
I`ve just bought a Mac Book pro 15", did the required updates and since two days ago it freezes. Now I can´t even start the computer. the screen is allways white. how can I solve this issue??
The same thing happened to me... Since two days the ******* thing keeps freezing after a while. Then I try to reboot and the screen goes white and it doesn't boot. If I wait like half an hour it boots again.
I thought it was a hardware problem, but the Apple Hardware Test founds nothing at all. I think it has to do with the software update I performed 2 days ago.
(MacBook Pro 15" Early 2011) -
when I try to boot my macbook pro the startup manager doesn't show any drives. How can I solve this issue?
Please confirm what version of OS X you are running - I doubt it is the ancient OS 10.1 !
-
I only use photobucket so I can post photo's on forums, the way to do this is by using the dropdown menu's below the photo's I have uploaded to photo bucket .
I have installed firefox 7 as my browser today and now those menus dont work any more how do I solve this problem?Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") -
My Game Centre was disabled. I was advise to login to my Game Center to enable my achievements. But everythime I login in to my Game Center, it take ages for the loading to process and just hang there. Can some one help me to solve this issue?
If the problem persists, you'll probably have to make another apple id, it wont take off any games or music or apps or anything you've bought it will all stay there, i have two apple id's and i don't have a problem with anything.
-
I am using the version 10.0.9 which might have been an automatic upgrade from my original version.
The majority of my connections between library items has been lost. The items show up as missing files both in the library and when I run my project. How can I re-estabish these connections?Did you try using the relink function?
-
it has each track repeated on just 5 of my albums
the rest are fine
ive tried re syncing and removing but nothing changes this
please helpWhen you connect the iPod to the Mac, what do you see on the iPod screen?
Is there any message from iTunes?
Check and enable that the iTunes Alert is not switch off.
refer to this Apple support article on alert switch.
http://support.apple.com/kb/HT2527?viewlocale=en_US
Have a nice day!
Maybe you are looking for
-
Copying files denied: the file name was invalid or too long
hi there i keep getting the above error message pop up when i try to consolidate my library. basically im trying to move my music from its current location to a new computer via external hard drive following the itunes directions but this error messa
-
Hi, I am wondering if (or how) it is possible to have messages in the Kudo activity list arranged according to the date posted? Right now one might find a list such as Thanks! PS: A different topic: In the editor, after inserting the image and center
-
R/3 Looking for generic RFC to post internal table as CSV to SAP XI/PI
Hi everybody, does anybody know a RFC to send a internal table to XI/PI? Thanks Regards Mario
-
Error loading essbase data into flat files through DIM
Hi All, While running the session in DIM 8.1.1 which will load data from Hyperion essbase (11.1.1.3) to flat file it fails. From the log file it shows failes to load the HASReader plugins. All the environmental variables are properly set. Still I am
-
Can I save my iPhone sound preferences?
When I am away from home with only my iPhone as my connection to home, I need to keep my ringer on at night but don't want to be disturbed by other phone sounds while I am sleeping. So each night I individualy turn off the sounds for emails, texts &