My photoshop cs5 will not recognize raw photos from my canon eos 70d

my photoshop cs5 will not recognize raw photos from my canon eos 70d

No.  DNG is a RAW format.  There are a few small manufacturer specific items that are left out when converted to RAW (for example, Nikon's Active D lighting) that aren't maintained, as well as some Meta data and focus points, etc.  Personally I never noticed the difference, but perhaps some do.  There is no impact to the image quality, you have just as much post production freedom with DNG.
I did it for a couple years before upgrading to CS6.  It's an extra step, but you get used to it and it's not a huge deal.  I would put my card in my reader, and download to a temp file.  While that downloaded I would go to the fridge and grab a beer [Edit - you can substitute the beverage of your choice ].  Then I would run the RAW to DNG converter, and drink my beer.  It was usually done before my beer (if not I got another).  I saved the CR2 files as a backup at first, but once I got comfortable trusting DNG I stopped doing that.
Another option is to get Lightroom and use that for your developing.  You can then send over a TIFF file with the edits.  But in this situation you couldn't send the image over as a smart object (I think, I assume this would use ACR?).

Similar Messages

  • Photoshop CS5 will not open raw files from Nikon D810. What do I need?

    Photoshop CS5 (bought in 2011) will not open raw files from Nikon D810 (bought in 2014). Is there a patch?  Is there something I can do? 

    YAY!!! Success. Thanks Jim.  I have the raw file for this image. ABC OPEN: Dancing water spouts in severe weather   I'm such a noob, I hadn't even set up the correct date on the camera.
    ABC OPEN: Dancing water spouts in severe weatherFran McFadzen captures a once in a lifetime photo of two dancing water spouts near Rockhampton.
    View on open.abc.net.au
    Preview by Yahoo
          From: JimHess <[email protected]>
    To: Fran McFadzen <[email protected]>
    Sent: Monday, 26 January 2015, 10:20
    Subject:  Photoshop CS5 will not open raw files from Nikon D810. What do I need?
    Photoshop CS5 will not open raw files from Nikon D810. What do I need?
    created by JimHess in Adobe Camera Raw - View the full discussionThank camera requires Camera Raw 8.6 which isn't compatible with Photoshop CS5. But you can download DNG converter 8.6 or newer and create digital negative (DNG) copies that will be compatible with Photoshop CS5. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7130665#7130665 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7130665#7130665 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Adobe Camera Raw by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Elements 10 will not recognize RAW files from new Canon 70D

    Do i need to spend more money at upgrade to Elements 11 or 12(once released?

    fotoman1951 wrote:
    Do i need to spend more money at upgrade to Elements 11 or 12(once released?
    Only if you want to get the new version but there is a solution to your problem.  The solution is to use DNG converter and to use this video as a learning tool:
    <http://www.youtube.com/watch?v=0bqGovpuihw>
    Hope this helps.

  • Photoshop CS4 does not recognize raw photos taken with newer cameras. Anyone else have this problem?

    Photoshop CS4 will not recognize RAW2 photos taken with my new Panasonic Lumix FZ100 camera. This camera is listed in Adobe's 6.2 Camera Raw update for Photoshop CS5 but cannot be loaded in CS4. I paid a lot of money for CS4 and don't want to buy CS5 just because I bought a new camera, but it appears that Adobe no longer updates Camera Raw for CS4 or with newer cameras. When I called the Help Desk to find out if there was some kind of patch I could get to make CS4 compatible with my new camera a gentleman in New Delhi informed me that he couldn't even answer my question until I paid $40 since answering questions about CS4 was a "paid service." I hung up in a rage. Does anyone else have this problem and is there a solution?

    This camera is listed in Adobe's 6.2 Camera Raw  update for Photoshop CS5 but cannot be loaded in CS4.
    Adobe does indeed not update obsolete versions of Camera Raw for new camera types.
    And guess what: It’s the camera producers who seem to like to change their raws – so how about spreading some of your indignation their way?
    I paid a lot of  money for CS4 and don't want to buy CS5 just because I bought a new  camera
    The upgrade is cheaper than buying the full version.
    Anyway, you could try the free DNG Converter which should be able to handle everything the most recent version of Camera Raw can handle.
    Edit:
    http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh&promoid= HTENC

  • Elements 11 - why does it not recognize RAW photos from Canon 70D?

    Elements 11 - why does it not recognize RAW photos from Canon 70D?

    Hi,
    The 70D requires Camera Raw 8.2 which is not compatible with Photoshop Elements 11.
    Your choices are
    1) Upgrade to Photoshop Elements 12
    2) Use the Canon DPP application to convert the CR2 files to TIF files and then import the TIF files into the organizer
    3) Use the free download of the Adobe DNG converter to convert the CR2 file to DNG files and then import the DNG files to the organizer.
    Note: if you are running on XP or Vista, you need version 8.3 of the converter - the latest (8.4) will not work.
    DNG  Converter 8.4
    Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5739
    MAC: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5738
    DNG Converter 8.3
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5694
    Brian

  • Elements 11 will not recognize raw files from  Nikon D610

    Elements 11 will not recognize raw files from Nikon D610. I have downloaded ACR 8.2 and DNG converter to no avail! Any suggestions? It does recognize files from my D600.

    Support for the D610 was added in the latest release candidate version of Camera Raw, 8.3 RC. You will need to install that version or wait until it is officially released. Your choice.

  • Hi cannot import RAW photos from my canon eos 5d mark 3 to iphoto 9.6 with iOS  X Yosemite. Fotos are black. Did you have a solution for that?

    hi cannot import RAW photos from my canon eos 5d mark 3 to iphoto 9.6 with iOS  X Yosemite. Fotos are black. Did you have a solution for that?

    Thanks. Once ImageCapture had accessed the photos, THEN iPhoto began to pick up the data, so I was ultimately able to do both. It only worked with the cable, though, not the card readers. Weird.
    And I really appreciate the ImageCapture tip. Any idea why it worked?

  • Photoshop CS4 will not read Raw files from Nikon D60. [was: No automatic updates for my PS CS 4  on windows (for reading .Nef files)?]

    Hi
    I have been using PS CS4 for several years.
    Yesterday, I went to PS CS4 help and selected "updates", but I get the message "There are not updates available at this time; Please note that some updates for the following products cannot be determined at this time: Adobe Updater".
    I need the updates because I just purchased a Nikon D60 and my Photoshop does not read the .NEF files produced by the camera.
    any idea, please?
    thanks

    I need the updates because I just purchased a Nikon D60 and my Photoshop does not read the .NEF files produced by the camera.
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    Do you really mean the Nikon D60 which shipped in 2008? Was it purchased secondhand?
    The Nikon D60 was first supported in Adobe Camera Raw 4.4.
    Photoshop CS4 ships with Camera Raw 5.0 so it can read D60 NEF files out of the box. No updates required.
    If you do mean the D60 then something else must be going on. e.g. are you using Nikon software to transfer files from camera to computer?

  • Aperture doesn't recognize RAW pics from the Canon EOS Rebel t2i

    I just bought a Canon t2i, and Aperture. I shot a few pics in RAW, in order to learn how to use both the camera and the software. When I plug in the camera, I can see all the pics, however once I upload them into Aperture, they appear to have no image. Does Aperture not recognize these because the camera is new? Am I missing something here? I'm new to this whole process... Any help would be appreciated...

    Companies like Apple and Adobe have to reverse engineer the RAW formats produced by the camera companies. Therefore, there's some lag time between the release of a camera and support for that camera. The amount of time varies, but Canon cameras usually get support fairly quickly. Just use Software Update to keep your computer up to date. Note: these camera RAW updates usually come in the form of an OS update.
    Welcome to the forum.
    DLS
    list of supported cameras
    http://www.apple.com/aperture/specs/raw.html

  • Lightroom 3 will not recognize raw files on my canon 6d-.

    My question is… Do I need to upgrade to LR4 or newer?  I currently use LR3. I just upgraded my camera to Canon 6d from 60d and really don't want to have to pay to upgrade.  I downloaded the Adobe DNG Converter but even that won't let me convert the 6d raw files. 

    Camera Raw plug-in | Supported cameras
    The link above will show when support was introduced. 6d support LR 4.3
    The latest DNG converter is version 8.5 which is equivalent to LR 5.5. The converter is a stand alone product. After installing the program open it, then select a folder that contains the raw files you wish to convert and proceed from there.

  • Why doesn't CS5 Bridge see my RAW photos from my Canon 7D?

    I just got a new Canon 7D. I can't open Raw files in CS5 Bridge...it only sees jpgs.  Is there a setting I need to change?  I have updated CS5 to latest updates.

    7D support was introduced with ACR 5.6, which was an update for CS4.
    Have you tried opening a 7D raw with Photoshop directly (File > Open ...)?
    Are you using a non-standard raw format (I dunno, I don't shoot Canon, but I believe there are alternative raw types)?
    Can you confirm that ACR is correctly installed? Photoshop > Help > About Plugin... - there should be one copy of Camera Raw, currently version 6.4.
    It should be physically located at:
    Windows: C:\Program Files\Common Files\Adobe\Plug-Ins\CS5\File Formats and/or C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats
    Mac:  /Library/Application Support/Adobe/Plug-Ins/CS5/File Formats
    and nowhere else!

  • I purchased photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in december 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can

    I purchased Photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in December 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can someone please tell me how i process canon 7D mk11 photos ?????. (is it possible to bypass camera raw and open the photo straight into CS5 without using camera raw first. if so how do i do that. if not how do i process pictures).
    Thank you.
    Brian in the UK.

    Photoshop by itself cannot process raw image data. That is why the Camera Raw plug-in was developed. You could try the DNG converter and convert your images to the DNG format and then the Camera Raw that you have would be able to open them. I can't recommend Lightroom because you are using Vista, and Lightroom 5 cannot be used with that operating system. It may be time for you to get a new computer and upgrade your software.

  • Photoshop CS5 will not open

    My photoshop CS5 will not open either from the desktop or from the program list. I can open Bridge but when I then try to view a photo in photoshop I get a message that says Bridge has stopped working and will have to close down.

    Please read below item and provide relevant information.
    http://forums.adobe.com/thread/419981?tstart=0
    Boilerplate-text:
    Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

  • As of today photoshop 11 will not recognize my scanner.

    As of today, Photoshop 11 will not recognize my scanner.  It was working fine before.  My scanner is connected via wifi.  Yesterday I lost the wifi connection so i reinstalled the scanner (cannon printer MG6120).  Now it prints photos ok but I can not scan.  It gives me an error that says I must connect my scanner to the computer.

    Brian, Thank you for your help.  I went to preferences and changed to a different printer and know it works.  Thanks again.
      From: LittlePaleFace
      To: [email protected]
      Sent: Friday, January 25, 2013 1:42 PM
      Subject: As of today photoshop 11 will not recognize my scanner.
            Re: As of today photoshop 11 will not recognize my scanner.
            created by LittlePaleFace in Photoshop Elements - View the full discussion

  • Photoshop CS6 will not open raw files even after I downloaded a DNG converter help please!

    Photoshop CS6 will not open raw files even after I downloaded a DNG converter help please!

    We are pleased to announce the Adobe Camera Raw 8.7 RC is now live on Labs! See the links below.
    Technology pages:
    CC - http://labs.adobe.com/technologies/cameraraw8-7-cc/
    CS6 - http://labs.adobe.com/technologies/cameraraw8-7/
    Download pages:
    CC - http://labs.adobe.com/downloads/cameraraw8-7-cc.html
    CS6 - http://labs.adobe.com/downloads/cameraraw8-7.html

Maybe you are looking for

  • Problem with backspace on JFrame

    Hello, I have a problem on a JFrame. Indeed, I add a keyListener to the frame, but the "Bakcspace" don't work. There is anything when a I press on Backspace (with KeyTyped, KeyReleased and KeyPressed). All other keys are working. Thanks.

  • User exit in PO

    Dear friends, I need to do user exit in transaction ME21N and ME22N in which I need to validate material group with that of material group in services tab for BSART = 'DDS'. Its a table control and I need to validate as soon as the user presses enter

  • Lookup into XML file in Lookup Transformation

    Hi, I am wondering if it is possible to do a lookup transformation where the source is an XML file, if so, what are the steps? thanks in advance paburgos

  • TV@nywhere - no video

    I have a TV@nywhere 8876 and get sound but no video in MSI PVS. I am connecting to the card by coax. When I first installed WinDVR and the drivers I got only garbled sound on some channels. I downloaded the updated WinDVR and drivers from MSI and can

  • How to bound the reources to a material?

    How to bound the reources to a material? For example, Material A -> Route A-> Operation A (ResourceType A) - Operation B (ResourceType B) Material B -> Route B-> Operation B (ResourceType B) - Operation C (ResourceType C) It means in Operation B, we