My Photoshop CS6 is creating some problem.

My Photoshop CS6 is creating some problem.....whenever I am opening it, the software is crashing, showing " Adobe Photoshop CS6 stopped working ".....What should I do ?

Look in your Windows Application Event Log and see what the Faulting Module is that causes the failure. That may give additional hints as to what's wrong.
Crashes can occur because of outdated display drivers, bad 3rd party plug-ins, or even corrupted preferences. A look at the Faulting Module path/name is a good first step.
-Noel

Similar Messages

Photoshop CS6 has encountered a problem and needs to close

I just download cs6 photoshop, I can successfully download the program but when I try and open it up I get an error that tells me "Adobe Photoshop CS6 has encountered a problem and needs to close. We are sorry for the inconvenience." I uninstalled photoshop and re installed it hopping this would work but it didn't. This is the error signature that is pulling up. also ran adobe support advisor and it found no problems. My system is xp version 2002 with service pack 3

Not much luck I'M afraid tried to understand all that was there this is all I could come up with, dose it help at all?
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 70 68 6f   ure pho
0018: 74 6f 73 68 6f 70 2e 65   toshop.e
0020: 78 65 20 31 33 2e 30 2e   xe 13.0.
0028: 30 2e 30 20 69 6e 20 70   0.0 in p
0030: 68 6f 74 6f 73 68 6f 70   hotoshop
0038: 2e 65 78 65 20 31 33 2e   .exe 13.
0040: 30 2e 30 2e 30 20 61 74   0.0.0 at
0048: 20 6f 66 66 73 65 74 20    offset
0050: 30 31 32 33 37 38 62 62   012378bb
0058: 0d 0a                     ..
Just came up with this also;
OS Name
Microsoft Windows XP Home Edition
Version
5.1.2600 Service Pack 3 Build 2600
OS Manufacturer
Microsoft Corporation
System Name
HAYWOOD
System Manufacturer
Compaq Presario 061
System Model
PX786AA-ABA SR1500NX NA530
System Type
X86-based PC
Processor
x86 Family 6 Model 10 Stepping 0 AuthenticAMD ~1999 Mhz
BIOS Version/Date
Phoenix Technologies, LTD 3.14, 3/9/2005
SMBIOS Version
2.4
Windows Directory
C:\WINDOWS
System Directory
C:\WINDOWS\system32
Boot Device
\Device\HarddiskVolume2
Locale
United States
Hardware Abstraction Layer
Version = "5.1.2600.5512 (xpsp.080413-2111)"
User Name
HAYWOOD\Compaq_Owner
Time Zone
Eastern Standard Time
Total Physical Memory
1,024.00 MB
Available Physical Memory
352.92 MB
Total Virtual Memory
2.00 GB
Available Virtual Memory
1.96 GB
Page File Space
2.26 GB
Page File
C:\pagefile.sys

Photoshop CS6 transparent mask causing problems when saved as RGB Tiff and placed into CS5 Indesign

Is anyone aware of a gray/black halo around feathered transparency objects. The halo occurs where the solid area of pic feathers to the transparent.
NOTE: Image looks fine in Photoshop(CS6) but when placed as an RGB TIFF into Indesign (CS5) a black halo appears on page. See visual explanation below.
This only happens when image is an RGB Tiff and layer mask is used to create transparency. If image is saved as .psd then it is fine. Also when RGB tiff is converted to CMYK then this is also ok.
Is
I look forward to anyone's suggestions.
Ideally I could just start using psd format, but I have to handle alot of images that are already in RGB tiff and it is time consuming to have to open and re-save all of these.
Adobe Photoshop CS5 RGB tiffs are still working fine.
Thanks.
Colourjam.
(Pre-Press Production Digital Image Operator)

Yes the halo is does appear on the final PDF used for printing, and therefore does unfortunately print.
Why would RGB Tiffs in Photoshop CS6 suddenly cause this to happen. If we revert back to placing Photoshop CS5 files into Indesign, all is good.
Also it is not just an isolated event as my colleague has the same thing happening on his workstation.
Could it be that that Indesign 5 cannot colour manage the new CS6 RGB Tiff files?
CMYK tiff works well, as does PSD (CMYK and RGB)
Also please note, that if you were trying to recreate this to see if you get the samed problem, the halo occurs as soon as you create transparency with a layer mask and feather the edge of mask, and then save as RGB tiff. It will not be visible if you have a hard line or a vector edge.
Just for the record here is our set up.
Indesign CS5 (PC)
Photoshop CS6 (PC)

Photoshop CS6 on Yosemite make problems

Hello, I've Photoshop CS6 running on Yosemite und use a Wacom Cintiq as a second monitor. Often I can’t use shortcuts keys only after changing the tool.
Now I've installed the WhiteWindowWorkaround Plugin and this problem is fixed. But now I can't open, save and close with shortkeys anymore. Is there any solution, too?
I will be for any help thankful.

To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Note: If this process doesn't work for you while you're using a wireless (Bluetooth) keyboard, attach a wired keyboard and retry.
Important: If you re-create the preferences by deleting the Adobe Photoshop CS6 Settings file, make sure that you only delete that file. If you delete the entire settings folder, you also delete any unsaved actions or presets.
Reinstalling Photoshop does not remove the preferences file. Before reinstalling Photoshop, re-create your preferences.
NEW Video! Julieanne Kost created a video that takes you through two ways of resetting your Photoshop preferences. The manual preference file removal method is between 0:00 - 5:05. The keyboard shortcut method is between 5:05 - 8:18. The video is located here.
Mac OS
Important: Apple made the user library folder hidden by default with the release of Mac OS X 10.7. If you require access to files in the hidden library folder to perform Adobe-related troubleshooting, see How to access hidden user library files.

Adobe Photoshop CS6 and Canon printer problem!!

Use Photoshop CS6 to edit and print (try to print) to a new Canon Pixma Pro-100 printer. Photoshop is up to date and the Mac runs OS 10.8.5 - Canon printer driver is current at ver. 11.7.1.
When I print from Photoshop to the Pro-100 (let's say a 4X6 landscape snapshot to 4X6 borderless paper) the printer starts up and moves the paper out about 4 inches and then prints the
first two inches of the image, stops and ejects the paper!. I've tried different versions of printer the printer driver and made sure every things is up to date. However, I can print from MS Word,
Nikon Capture NX2, or Canon's own Print Studio Pro and it works fine. Canon is no help because if it works OK with their Print Studio Pro then it's not their issue - I tend to agree with them.
The same thing happens print from Photoshop to 5X7 or 8X10 paper - it gets ejected so far and then only prints part of the image. I've searched the Internet and posted in Forums but can't find
where any one would have the same problem. What I'm hoping for here is someone at from Adobe who's knows Photoshop tech stuff will post here with suggestion because there is no more
phone support for Photoshop CS6. I'd like to really keep this printer and get Photoshop to work with it but if I can't I'm going to offer it up free to a good home! JM Davis

Thanks for your answer, indeed this fixed the problem. Quite stupid I did not see this myself

Re-installing Photoshop CS6 on new iMac problem.

I transferred my Photoshop CS6 to a new iMac Retina running OSX 10.10.1, having taken care to deactivate on the old Mac first and then reactivated on the new. Photoshop comes up with an error message now each time I launch saying that "One or more files in the Adobe Application Support folder, necassary for running Photoshop, are missing. Please run the Photoshop installer and re-install Photoshop." So I did just that with my original installer disc. At the end of that process it said that there had been some errors and referred me to a log file which said:
Despite all this Photoshop seems to be working, but every time I launch it I get the same error message. I've not used it enough since the move to the new Mac to discover if any other faults have developed. As well as using my original install disc I also tried downloading the CS6 installer from the adobe.com site but exactly the same thing happens. I would welcome suggestions for a fix...

Alas, this did not work. I first of all tried the reinstall in Safe Boot mode and at the end of the process exactly the same install error message as shown above. I then moved to the part of those instructions that said to ditch Adobe AIR and reinstall it. AIR was not visible anywhere on my machine, nor did that folder /Volumes/Adobe Master Collection exist. Maybe there's a difference between what CS6 installs compared with the CS5 your instructions refer to (?). So I went back to the Adobe.com downloads page, got Adobe AIR and installed it - during that it told me it was upgrading my AIR (wherever that was hidden - Find file could not see it) to version 16. Otherwise no reported errors. I went a step further and used the Uninstall tool to remove the existing CS6 installation, then tried reinstalling Photoshop - again same issue, same error. So I'm no further forward after several hours of trying different things.
Any more ideas please?

Photoshop CS6 extended creates 65,000+ tmp files

Can anyone help with a tmp file problem? After the last update for Photoshop CS6 extended, I get 65,000+ .tmp files (all 0k size) each time that I save a jpg or targa file. It doesn't matter if I save to the local drive or a network drive. It also takes almost 20 minutes for the save to finish. It then takes 15-20 minutes to delete all of them. Images are 1.5-2mb files.
System is running Windows 7 64bit pro with 4gb of ram. Local disk is 500 gb 7200 speed with 45% free. Servers are both Dell PowerEdge with two separate Raid 5 each server with 4 1tb 7200 speed drives per raid. Servers have two Intel Zeon processors and dual gigabit network cards.
thank you
Brian

Monitor the file I/O with tools like Sysinternals' System Monitor and check what's causing the problem. Could be a mundane permissions problem with your temporary folders or otehr resource problem.
Mylenium

Photoshop CS6 Brush Preset Picker Problem

Hello
I'd like to know if it's possible to tidy up my PSCS 6 Brush Preset Picker? Please see image.
My brushes are installed here: C:/Program Files/Adobe/Adobe Photoshop CS6 (64bit)/Presets/Brushes
I can't seem to find any other location that would be causing this issue. It's only happened since I installed CS6.
Thanks for any help or advice
Diane

Thanks for the response. I realise there are duplicates. My question is how do I delete the duplicates from the picker? They're aren't duplicates in the actual folders. I've also organised the brushes into folders, restarted photoshop, rebooted and the problem is the same.
Anyone know where the duplicates might be located on my pc? Or how to delete them in the picker?
Thanks

Adobe Photoshop CS6 won't run, problem with Application Manager

I've now got three Adobo Photoshop CS products on my MacBook Pro, the latest is CS6 which won't run.
I own Photoshop CS3, I just happen to install the CS5.x suite today, which runs during the trial period (30 day, today is day #1).
I then see that PSCS6 is out so I install that and get an error dialog.
Adobe Photoshop CS6
Adobe Application Manager, required to verify your license, is missing or damaged.
Please download a new copy of Adobe Application Manager from http://www.adobe.com/go/applicationmanager.
I go to that URL, run the new application manager and get that same dialog box when I try to run CS6.
When I did the CS6b install it asked for my Adobe ID/password and I entered that and the install completed. So I'm not sure what's going on.

Hi, Using OSX Lion...was getting the same AAM errors.
I hope my "fix" is of help:
During one installation attempt I noticed that it was using an Adobe Application Manager here:
~User/Applications/Adobe/OOBE/PDApp/core/Adobe Application Manager
It is version 6.0.236.0 and the installer deletes it after the install. The download page only has version 2.
So during my last install attempt, I grabbed a copy of that OOBE directory -- to catch the support files -- before deletion.
Did not work in user Applications folder, but when I copied it in the location of AAM 2, it works.
The full location is as follows (I renamed the original OOBE folder as a back-up):
HD/Library/Application Support/Adobe/OOBE/PDApp/core/Adobe Application Manager
Authorization works, and software update seems to...however, uninstall can't use this method.

Adobe Photoshop CS6 Offline Trial Installation Problems (Request Code)

I have been trying to install Adobe Photoshop CS6 Trial offline because it says "my computer isn't connected to the Internet" but i cant figure out how to generate a request code. See screen shots. These are my EXACT Steps. I don't know where to go from here. Thank You!
Step 1. I click "Sign in now"
Step 2. It loads for about 2-3 minutes
Step 3.This screen appears and I press the link that says http://www.adobe.com/go/getactivated
Step 4. This screen appears and I press "Generate a Response Code"
Step 5. This screen appears and I have no idea how to get a request code.

Please also see Sign in or activation errors | CS6, CS5.5 Subscriptions, CS6 Perpetual - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html which discusses how to resolve the difficulties you are currently experiencing.

Photoshop cs6 extended trial download problem

i want to download photoshop cs6 extended trial version, but Download Assistant is only showing downloading option for photoshop cs6 standard.

Installation files of Photoshop CS6 and Photoshop CS& Extended are always the same. So just download the Photoshop CS6 through the Download Assistant.
If you buy Photoshop CS6 it will hide all Extended functions, unless you bought Photoshop CS6 Extended ;-)

Photoshop CS6 13.05 Update problem

Hi. I am trying to update Photoshop CS6 to 13.05. I get
"Installation failed. Error Code: U44M2P7"
Help please.

Hi kpot007, this error message is usually caused by a missing application file. To fix this it is recommended that you run the CS6 installer to repair or replace Photoshop CS6. When you have done this, then you should be able to update Photoshop.
Let me know if that helps.

Photoshop CS6 Nudging 10 pixel problem

Hi.
I have identified a major problem using CS6.
When nudging folders (filled with layers) around in Photoshop. Holding the shift key at the same time as pressing an arrow usaully nugdes content 10 pixels. However, pressing the arrow key in quick succession, for example 4 times, it will only nudge content 39 pixels or 41 pixels. Pressing the arrow key, say 10 times, quickly would result in only a 95 pixel movement.
Opening the same (80mb) file in CS5 and performing the same test, nudges a ... perfect 10 everytime..
I am a ux visual designer working on major household clients and my PSDs need to be pixel perfect before passing to development. Anything out of place would be highlighted and ultimately would make me look like a novice.
The files are not big. They are for the web. I use CS6 (v 13.0.4) and a 2.7 Ghz Intel Core i7 Macbook Retina with 16GB RAM and SSD. Currently the fastest Macbook you can buy!

ROFLMA
The best laugh today, so far!
station_2 blunt_meanswell wrote:
"You are delusional if you think I have any intention of paying attention to your remarks."
Delusional?
You're not only paying attention, you're replying!
ROFLMA

Can a broken SDRAM memory create some problem?

I just discovered that the amount of memory installed in my laptop is no longer the one I am supposed to have.
This is what I have installed (from About This Mac, More Info...)
SODIMM0/J20STANDARD:
+Size: 512 MB+
+Type: DDR SDRAM+
+Speed: PC2700U-25330+
+Status: OK+
SODIMM1/J23REVERSED:
+Size: 256 MB+
+Type: DDR SDRAM+
+Speed: PC2700U-25330+
+Status: OK+
And I'm sure that the reversed memory should be 512 MB.
from the diagnostic I can read this:
+Power On Self-Test:+
+Last Run: 10/25/08 9:41 PM+
+Result: Failed+
+Failure type: Memory+
+Memory slot: SODIMM1/J23REVERSED+
I don't know how long this has been the situation. But I know that recently I had some operating system problems, 3-4 times during regular browsing with safari, the black screen that tells you to restart the computer appeared.
I think that the last time this (probably) caused major problems to the internal Disk... please see this discussion:
http://discussions.apple.com/forum.jspa?forumID=758&start=15
I wonder if these issues were caused by this broken memory.
My questions:
Can this memory issue cause other problems?
Should I keep working with this existing condition or it will be better to remove the "broken" SDRAM "broken" and replace it.

Hi there,
Can this memory issue cause other problems?
Yes, +untold problens+.. just one bit being off could be the difference between read a file and deleting a file!
Should I keep working with this existing condition or it will be better to remove the "broken" SDRAM "broken" and replace it.
Remove it or replace it, then Verify/Repair the HDD at the very least.

Adobe Photoshop CS6 png image transpercy problem

Hello,
On our site we used a lot of transparent png images.
The images show up fine however they are not transparent as in Photoshop.
Now the transparent areas are white where they are transparent in Photoshop.
Can anybody explains me what I'm doing wrong ?
For example the logo at the top above antivirus.
Example 1 Antivirus logo
Example 2 Antivirus norton product page overview.
Exampe 3 Antivirus prijs in product overview.
Thanks for the support.
Could this have something to do with how I save the png images ? For example I can save as PNG 24 and several other PNG types.
Message was edited by: BRDigital

Thanks for your answer, indeed this fixed the problem. Quite stupid I did not see this myself

My Photoshop CS6 is creating some problem.

Similar Messages

Maybe you are looking for