My Photosmart 3210 will not change its IP address. It is always 0.0.0.0. even after a Manual setup

My printer has become disconnected from my Network. The first time I removed all the software and re-installed it / rebooted and it seemed to be ok. However, after 4 or 5 pages it stopped and HP Solution Centre showed the printer as Disconnected. Device Manager showed the device as disabled so I enabled it but no change. I then checked the Network set-up and the IP address was shown under the Manual set-up as 0.0.0.0. and I could not reset it to the correct value. I added the correct numbers but when I pressed OK it reverted to 0.0.0.0. everytime. I could set the Submask and Gateway to the correct value but not the printer. Is this a 'dead' machine ? I have tried removing power and restarting......

The router is a 2-Wire model supplied by BT and shows the network correctly - and with the correct IP address for the printer, but it is shown as disconnected. I've tried changing it using the printer front panel and add the IP i want manually and as soon as I OK to store the info if reverts to 0.0.0.0. I can change the Subnet Mask and the Default Gateway and they will stay but as soon as I set the IP address again it all reverts to 0.0.0.0.. I guess the network card is dead and I have now set the printer up using the USB connection..... and my last USB socket on the computer .....

Similar Messages

The URL does not change in the address bar, it always shows the initial URL of the project.

Is it possible to show the exact link when a topic is opened? I only found a workaround by opening the topic in a new tab, clicking the show ToC option and copying the link, but I would not suggest that method to our customers.

Have a look at this thread & its references - http://forums.adobe.com/message/6138628#6138628

HT5622 My wife and I shared an Apple ID, have closed out iTunes on her iPhone and iPad but will not allow her email address to be associated with a new account even though it does not appear anywhere in my information. Any suggestions.

My wife and I shared an Apple ID, I have closed out the iTunes on her iPhone and her iPad. While trying to set up a new iTunes account when I enter her email address it says we have to select a new email address. I have checked and her email is not associated with my iTunes account and really do not want to establish another email account. Any suggestions?

Hi Stateler74,
Thanks for using Apple Support Communities. You might be able to find the Apple ID that her email address is associated with by following this article's instructions:
Apple ID: Finding your Apple ID
http://support.apple.com/kb/HT5625
Cheers,
- Ari

TS1702 When I go to update an app, it says that it will not work, click retry or cancel. So I click retry and even after I do that, it won't update

iPad mini

What app is it you are trying to update? Also have you tried resetting your device by holding down the home and power button for 15 to 30seconds until you see a silver apple then let your device start normally. And attempted to update the app again?

HP Photosmart 5510 will not print Black Ink!! - Time to "break-up" with HP

I came upon this forum by doing a google search for the issue I'm having which is my HP Photosmart 5510 will not print black ink. The printer is a year and a half old and is used only for home office use (not a heck of a lot of printing being done)
It started right after I installed new ink cartridges (all four of them) I want to mention hear that I ONLY buy genuine HP ink cartridges from Staples and when I replace my cartriges I replace all four at the same time even if one ink level is not considered "replaceably" low. When the issue started I thought I must have gotten a bad black cartridge so I went out and bought another one but was still having the issue. So that's when I did my google search.
I tried all the suggestions (several times) on this post (which did not reslove the problem) : http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-Photosmart-5510-will-not-print/m-p/1...
and I tried a "Hard Reset" as suggested here (again did not resolve the problem) : http://h30434.www3.hp.com/t5/Ink-Toner-Cartridge-Printhead-Issues/Photosmart-5510-Will-not-print-in-...
After trying all of these my color ink is less than half full....remember....I started with 4 brand new ink cartridges...so now, I'm out roughly $85 in ink just trying to resolve a problem that should not have happened in the first place!! Shame on HP for makeing such poor quality products. I gave up on HP computers years ago and now I'm giving up on their printers!! This HP Photosmart 5510 All In One printer replaced an HP Color Laserjet CM1312nfi printer (which cost approximately $400) that only lasted about 3 years. Sorry HP but that's it....I'm moving on! Consider this our "break-up" letter.

Hi TisKate, sorry to hear that you are having printing issues when it comes to printing in Black. I am also sorry to hear that you are breaking up with HP. I would like to offer a couple more troubleshooting steps before we say our fond farewells. Now this might sound silly but really it isn't. If you have the power cable connected to a Power bar/strip, please remove it and connect the power cable directly to a wall outlet. HP printers already have a built in surge protector and if you have it in a strip/bar, the printer will not get all the power needed to function properly. This can cause printing issues or false error messages on the printer display screen. Here is a document that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
The other step I would like to take is on the printers display touch screen. Please use the right arrow key and go to the Wrench icon. Press the wrench and go to the Tools menu. Once in the Tools menu, please select Clean Printhead. Use the cleaning utility 2-3 times or until you see a change in the print status reports. It might take a few cycles but I am confident that it will make a difference.
I hope you and HP can still be friends( friendly humor).
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

My Ipod touch will not change songs or shuffle

My I pod touch will not change or shuffle songs. Everything else seems to be working correctly. Any suggestions?

While playing any song on your iPod, tap the artwork to bring up the scrubber bar and additional controls. On the left hand side is a option for repeat. You want to make sure this icon is white (meaning it is set to Off). If it isn't tap it either one or two times to change its current setting.
Any luck there?
B-rock

My 3210 will not print in pink/magenta. photos and other pictures print in green tones.

my 3210 will not print in pink/magenta. photos and other pictures print in green tones. i've seen posts clear back from 2011 with no replies or solutions. if this is hp's definition of product support, i will be sure to choose a different manufacturer when purchasing my next printer ... which will be SOON.

Hello @justjen ,
Welcome to the HP forums.
I understand that your Photosmart 3210 stopped printing magenta.
I would like to help.
Try going through the steps in the following document.
Printed Colors Are Not the Colors Expected
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Mouse cursor will not change to brush cursor in photoshop cs6

Hello can I ask for your help please.
My mouse cursor will not change to a paint brush cursor. I have tried the preferences/cursor selection but it still does nothing, I have also tried resetting the brush tool and still nothing.
I am also using a wacom but I don't think its my tablet, I am using a IMac.
Thank you.

Is the Caps Lock on?

Hp photosmart 5515 will not print black.

hp photosmart 5515 will not print black, but will print colors (cyan blue yellow). Printer shows full inks on all colors.
This question was solved.
View Solution.

No solution. Power cycled several times, power cycled computers, modem, router, performed all recommended cleanings, changed all ink cartridges, checked it over several days - no go. Then, suddenly, after weeks, it started printing again. That's one hell of a gremlin. Throughout all of this time, my inexpensive Canon printer never faltered.

View only works in one direction,will not change when I turn the phone

view only works in one direction,will not change when I turn the phone

Is the rotate lock on?
http://appletoolbox.com/2013/03/iphone-ipad-or-ipod-screen-will-not-rotate-fix/

My HP Photosmart 8250 will not print in black.

Hi,
My HP Photosmart 8250 will not print in black. I saw previous posts stating that it will not print in black if any of the color cartridges are empty, but all of the cartridges have ink. Thank you!

Hi rine051662hart,
Welcome to the HP Forums.
I see that you are having an issue when attempting to print in black ink.
Please click on the following link that deals with when the Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages
Please feel free to write me back if you have additional questions or you can contact HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Photosmart C7250 will not install with Windows 7

I have bought a new computer wth Windows 7. My Photosmart C7250 will not install on this operating system wirelessly or by USB. The driver will install so that I can print only when I plug it in, but I cannot achieve full functionality. When I try to install it over the wireless network,, it gives me a fatal error (code 14116417). The printer does connect to the wireless network, though. I have uninstalled and reinstalled numerous times, and have run out of options. Any ideas, besides buying new??? I really like this printer!!! And thank you in advance!

I is likely not your printer. Here are a couple of things to check:
1. Disable your security system's firewall.
2. Reboot your router and try again.
Tell me about your network - router brand/model, encryption type (WEP, WPA, etc) and ISP type (DSL, Cable, etc).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Finder Icon will not change! Please help!

I have been customizing the look of of my dockbar on my imac by giving all of my apps new ios 7 style icons.
Yesterday I changed my Finder icon with no problem at all by going to:
System→Library→Core Services→(right click 'Dock'→Show Package Contents)→Contents→Resources.
And replacing the two png files (finder.png) and ([email protected]) with my new images. Yesterday I did this all perfectly fine and it changed to my new icon.
However today I found a better finder icon and decided to change it again to this new version. However what ever I try it will not change to this new icon.
I have followed the exact same steps as before, I have replaced my two png files from yesterday with my new ones and I have checked and re-checked that I am naming the files correctly, and that they are the right format etc.
I have even deleted my original icons that I changed it to yesterday and emptied them from the trash but it is still there even after restarting and shutting down and rebooting.
I have also tried going to terminal and typing 'killall Dock', it still returns with the same icon that I changed it to yesterday, even though I have deleted them from my hard drive.
Please help me this is so frustrating and have wasted many many hours on this.
(I am on mavericks btw)

(I am on mavericks btw)
iMac, OS X Mountain Lion (10.8.4)
Then, update your profile/product info. BTW, I have nothing for the icon problem.

Statistic report with figures that will not change when rerun months later

Hi,
Is there any good practices that we can follow to create statistic reports with figures that will not change even when rerun after few months later?
My scenario is my statistic report is generated based on data that is "alive" which means the record will get change after a period of time. So, if you generate the statistic report in for January 2006 in the month of January and regenerate in May for the January 2006 statistic, the figure is different. But what I want is to be able to get the same figures.
I know in this case looks like we need some sort of summary tables, so posting this to get advice on the best way to design such summary tables. Please comment if there is other ways of doing it.
Summary tables may work for statistic report, but how to support detail report listing where the records are required to be the same when it was generated few months ago.
Please advise.
Thank you.

What happens, when you execute a report today is the following: a select statement is fired at the data base and the result set is displayed in the report. The data can change after the moment you launched your report. What you could do to keep the result set the same, is implementing a user parameter that fills your date discriminator.

In the advanced tab of languages and Region the time and date formats will not change

For a certian Application I am using I need to change the format of the Time and Date. I had no problems in Mountain Lion. In the advanced tab of languages and Region the time and date formats will not change. I need the date format to read as 01/01/14 and time format to read 13:00. As I said this was easily done in Mountain Lion and all previous Apple OS. I suspect it's an issue with in the OS.

You're right, it has been that way for a long time. I've never bothered reporting it as a bug since it's simple enough to deal with, but reporting it would be a reasonable thing to do.

My Photosmart 3210 will not change its IP address. It is always 0.0.0.0. even after a Manual setup

Similar Messages

Maybe you are looking for