MY photosmart B 210 is not printing with the black ink at all. Pages are coming out blank

Print report says ink is low in the colours but they do appear on the sheet but no black ink at all
It is a relatively new cartridge and genuine HP ink. Stopped suddenly
Pages from print or copy are coming out blank.
Tried  to clean print heads and it says
Print System Failure : Oxc19a0003
and tells me to switch printer off and back on which I have now tried but getting the same message!
What does this mean?

Hi @BrendaMC,
Welcome to the HP Forums!
I noticed that your HP Photosmart B210 printer is not printing black ink, and that the pages are coming out blank. I am sorry to hear this, but happy to help!
I would suggest to go through the following guides:
Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Photosmart Plus e-All-in....
'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error M.... 
Ink Usage in Inkjet Printers.
Hope these guides are helpful, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

  • How do I setup my printer to print with only black ink in a pages document

    How do I setup a document to use black ink only in Pages?

    This is a Printer setting, rather than a Document one.
    For my Canon Inkjet, it's done in the Print Dialogue:
    As you can see from the second pop-up menu, I have saved this setting as a preset.
    The setting itself has only a single change from the supplied "Standard" setting—checking the Grayscale Printing checkbox.
    Going by appearances, the printer uses only the Black cartridge when printing in this mode, unless I have set "Use color cartridge" in the printer's utility software, a setting intended to allow you to print using only one cartridge when the other is out of ink. Greyscale printing using only the colour cartridge has less contrast, and usually shows a colour cast. Setting the printer utility to specify using only the K cartridge shows results essentially the same as those done in grayscale using the Print dialogue setting and not bothering to change the printer utility setting.
    Regards,
    Barry

  • How can I print with the black and white cartridge only?

    I am trying to print using the black and white cartridge only because magenta is out of ink but I'm getting the following error message in HP Photosmart C7200 series print dialog:
    The printer is out of ink.
    The following ink cartridges are empty: Magenta. Replace these ink cartridges to resume printing.
    How can I print with the black and white cartridge only?
    Mac OSX 10.7.3
    HP Photosmart C7280 (7200 series)
    This question was solved.
    View Solution.

    I am absolutely disgusted by this; clearly a scam from HP to make more money by selling extra ink cartridges!!  I will make sure to never buy any products from the shoddy rip off merchants at HP ever again!!
    You should be ashamed!!

  • How to De-authorize an older PC running Windows 2000 with iTunes 7?  My itunes will not connect with the iTunes store to all the de-auth request.

    How to De-authorize an older PC running Windows 2000 PC with iTunes 7?  My itunes will not connect with the iTunes store to all the deauth request.

    The "Deauthorize All" command is only available if iTunes thinks you are currently using 5 authorizations. 
    Otherwise, you can only deauthorize the old computer by using "Deauthorize this computer" from the computer itself.
    If the old computer is no longer operable, you can't deauthorize it, but that is not a problem.

  • Cannot print with just black ink with a epson 9600

    The printer works great but I have a color tint i my greyscael images. I would like to print only usig the black inks. when I go to
    print
    print setting
    Choose my paper type from the drop down
    the ink  and color dropdowns are grey and inactive
    i have tried photoshop manages colors as well as printer manages colors
    i have reloaded the drivers
    it works fine out of preview and lightroom
    help please
    Dan

    Print mode should give you choice of Color or Black. Black means black ink only.
    This will not give you a good looking print as it will be grainy and hard to control.
    Consider using Quadtone RIP which will incorporate all needed colors to create a proper grayscale print with proper tones.
    Quadtone RIP will probably offer the needed settings for this but it might require finding some files on the net.
    Imageprint RIP is very good for this but is quite expensive.
    Barry Rudick
    Aker Imaging

  • Firefox 5.0.1 would cause my Free Download Manager to be disabled because it is not compatibl with the new version. What ones are compatible and free?

    I have received a pop-up advisory from Firefox several times, saying that my Free Download Manager is not compatible with the recommended 5.0.1 upgrade and wold have to be disabled until the compatibility problem was corrected.
    (I think that I did download it, and that was when I got the first warning. I visited my download m manager shortly afterward, and all my download history had disappeared. I think that I then reversed the upgrade.)
    Since then, my emails will load only in Basic HTML, which I have several problems with. I don't know if that is a Google or a Firefox problem.
    So, my initial problem is that I need a reliable and easy to use free downloader before I can upgrade and get my Standard HTML back.
    What free Download Managers are compatible with Firefox 5.0.1?
    While we're at it, is 5.0.1 Beta? And what is Beta?

    Solution: (Free Download Manager)
    Go here: http://codecpack.co/download/Free_Download_Manager.html and download Free Download Manager 3.8.1067 Beta 3, it works perfectly with Firefox 5.0.1
    Solution: (to Google mail aka Gmail)
    I have had this problem for a while since I did a previous Firefox update, where I had to force Gmail to load in Basic HTML else it's next to impossible to use it. The solution is this: simply update your Java, and Gmail will work without a problem using Standard HTML. To update your Java go here: http://www.java.com/en/ and select "Free Java Download".
    And beta normally, universally, means "the not quite there yet version of the version we're aiming for" NORMALLY used during production and testing of a type of software.

  • Print with a black border to show page "edge"?

    I'm printing a letter size document from illustrator at 50% size. All pages have a white background so I would like to have the document print with a black rule/ border around it so I can tell what it will look like. Is there a way to do this without manually putting a rule around all 25 existing artboards? Or is there a way to do this in the Acrobat pdf I'm outputting from this doc?(CS5) - many thanks!

    if you want to make a border around your artboards, try the script on this post
    http://forums.adobe.com/message/4604605#4604605

  • Photosmart 3210 not printing with full black cartridge.

    My photosmart 3210 has had 2 new black cartridges installed and the display acknowledges they are full. However, it refuses to print in black. I have cleaned the heads, successfully aligned the printer but black is still missing from anything I print including test pages. All the printer does is print the black bits using a combination of other inks, which usually results in a in a wine colour. Please could somebody help me.

    JenBrock...did you ever get a solution?  I am having the same problem and have tried all the same troubleshooting options with no sucess.  I also tried to calibrate the color and the background color on the grey squares did not print nor did the black numbers that corrispond to each square print.  Help please...Anyone?!!!

  • Officejet 4620 not printing with the new black ink cartridge installed

    I installed all new cartridges yesterday and the black will not work.  All the other colors work great but the black will not work at all.  Please advise!!!

    Hi Meganrvt,
    Welcome to the HPCommunity, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that you are having some issues with your new black cartridge. I will be happy to help. I have included an HP document below for just this issue.
    Printer Does Not Print Black Ink or Color Ink or Print Blank Pages
    If that doesn't work you should contact HP Total Care as ink has its own warranty. HP Total Care can be reached at 1-800-474-6836 in North America or visit this link if you live outside of North America.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Printing with only black ink

    when i bought the hp 8600 officejet pro plus,  i was toil that you didnt have to replace the empty color catridges to print in black ink only.  i have jsut found out that is not true.  is there a way to make printer print without replacing collor cartridges?

    Most likely the confusion is caused because the Office Depot sales person and the bushiness associate did not distinguish between the different kinds of printers.
    There are generally a few different technologies used for inkjet printers - those like the Deskjet 6940 that have printheads and ink supplies integrated together are called Integrated Print Head (IPH) printers.
    Another style has separate individual ink supplies and printheads.  This style has printheads that may be permanent and non-replaceable, or they may be replaceable after some number of ink supplies.  These are called Individual Ink Cartridge (IIC) printers.   An Examples are the Photosmart C7280, which has permanent non-replaceable printheads and the Officejet 8600 and 6700 which have replaceable printheads.
    Most IPH printers will happily print with one (or even both) cartridges low on ink or empty.  Recent models will often allow printing even if one of the cartridges is removed completely, switching automatically to "reserve mode" or "ink backup mode". 
    IIC printers have long life printheads and generally have plumbing to connect the ink supplies to the printheads.  These printers (whether from HP or other manufacturers) generally require ink available in all colors to prevent air bubbles in the plumbing ar printhead.  Some ink is also required to keep the nozzles from clogging.  Even in the case of printing black only the color printheads are waving around in the air and may dry out.  Some ink is required to keep the printhead from drying out.
    The document here has some information on how ink is used.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Photosmart C5180: How do you print coupons in black ink only?

    I have a Photosmart C5180.  When printing coupons from the web, I don't get the print dialog box...it just goes straight to printing.  I do not want to print them in color, but the default, preference, setting, whatever is set such that I am printing in color.  I want to know how to alter this so that I do not waste color ink.  Any ideas?

    You need to change the printing preferences. The easy way, when you press 'print',  in the dialog box that pops up,  press the preferences bottom,  and select print in 'grayscale' in the color tab.
    This will work only with this one printing, for a permanent fix, you must change the 'printing preferences' in the printer's properties. You  can get  there from the Control Panel>Printer & Faxes>Right click on your printer name>preferences.
    elaiva47

  • Printing from Photoshop to EpsonR3000 on MacOSX.8.5 on photoshop manages colors I cannot print with matte black ink

    Because it doesnt recognise the matte paper selection and defaults to glossy. If I select matte black ink at the printer manually and send to print, it will not print amd asks for black ink to be switched to photo black. Help! I've spoken to Epson and switched the printer once and they have demonstrated it works in Preview and say talk to Adobe.

    Tom-Rockwell wrote:
    I think you need to re-install the Epson print driver. I've seen this issue with upgrades to Lion, too.
    Yup, its the Gutenprint driver that replaced the Epson driver. As you say, reinstall the correct driver from Epson. Then NEVER let Apple’s Software Update ever update drivers (that’s the kiss of death).

  • My HP Envy 4500 does not print text in black ink

    I bought my printer this summer, it is only 5 months old.
    Now it does not print black ink. Text in black does not appear when printing, every other colors appears.
    I've cleaned printerhead with software installed (HP doctor), but it did not solve the problem...
    I used the CD when I installed the printer/drivers, and I have updatet software when asked by "update manager".
    I have not had this problem earlier, it has just occured last weeks...
    What can be missing here? Can someone help?
    If the printerhead is broken, can I have a replacement sent to me, or can I pick one up at the store I bought the printer?

    Hi @jb-thom69 
    i appreciate the efforts you have made to resolve the issue. At this point, I suggest calling HP.
    If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
    HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check. 
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Why does my Blog not publish with the rest of my new pages and photos????

    Much more work was done on my iWebsite today and I even made a rudimentary beginning of a blog.
    QUESTION:
    Why does my blog not publish?
    Lorna in Southern California

    James, the blog is on Safari now. I am embarrassed to say that I had already forgotten that I needed to make a link to the Site Menu. Since I had done all of that in a tear of activity previously, it's as though the process did not stick in my head. Sort of like forgetting to plug in the computer. 8-(
    I did not even realize what I had done wrong until I made a hyperlink from that site to my site menu and checked to see that the blog became visible. It's disconcerting to think that this kind of thing could happen to me again. 8-(
    I would be very interested in seeing people's blogs and how they use them. I've seen blogs used as news reports, blogs with music videos, blogs with photos. I earlier thought that a blog was like a diary: Words only.
    Lorna in Southern California

  • I have just got the new version of iTunes. It does not seem to be recognising either my iPhone 5 or iPhone 4. They do not appear in the device list at all, they are clearly conencted to my computer as they are charging off it, but I can't sync them.

    They were both functioning fine yesterday, but after the v.11 download today they aren't being recognised. Can anyone help me to get them syncing again? I am using an iMac, Mac OS X v.10.7.5, if thats of any significance.

    Disconnect your devices then reboot your computer.
    Before connecting your devices again reboot your devices. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Maybe you are looking for

  • New table in database

    I have creator-2004q2-windows-ml.exe. 1) how can I make new table in Pointbase from JSC or Application Server or comand prompt? I'm new in JSF, JSC, Sun AppServer and Piontbase. I still learning and I need to add few more tables in any existing datab

  • Corrupted Frame files not importing correctly to RoboHelp and can't save MIF as FM

    Hi, I have Adobe Technical Communication Suite 3.0, which has FrameMaker 10.0.2.249 in it. I created a user guide in FrameMaker, some of the chapters for which I imported from Word, and little bits of text here and there of which I copied and pasted

  • How to relocate control file?

    I want to relocate my control files to a new location.. I want to know my options on how to do this (apart from shutting down db). Users are logged on most of the time. Oracle version is 9i.

  • Add-ons getting installed when i have add-ons update unchecked

    In the Options-Advanced-Update I have Add-on UN-Checked to not install add-ons. The last few times I've started Firefox, the Add-on window appears to inform me that new add-ons were installed. Why is this happening when I have this option turned off

  • E71 problems: camera

    E71-1, firmware version 100.07.76, 08-06-2008, RM-346 1. With the default settings, the camera takes pictures with a faint purple tint. This can be corrected somewhat by manually selecting the appropriate white balance. 2. There may be a delay of upt