My photosmart c410 pauses ~ 1 minute before finishing the last page of a job - also on a single page

I have a photosmart c410, set up as wireless. On the last page of a print job, printing stops with about 1-2 inches to go on the page, then waits around 1 minute and finishes. A single page job does the same thing. During this time there are no errors visible, the printer and print queue indicate the job is printing. When finished, the print looks fine.
Is there a way to get it to finish without the delay? I tried the print diagnostic utility. It says jobs are stuck in the print queue during the delay time. The "fix" can't clear the problem and just says "reboot". After the print job completes, every thing reports as OK.
UPDATE: 11/9/11 - HP Customer service (on chat screen) walked me through diagnostics, identification and solution to problem. The person was extremely patient and helpful - it took almost an hour, but the printer is working properly now.

I've kept investigating this further.
I've now found that this is a cache management issue.
I found that the cache options (Tools-Options-Advanced-Network ).
The Cache file on Firefox was set to a limit of 350 MB and the Cache was using 350 MB of storage.
I tried clearing the cache.
After I cleared the cache I found that when I had loaded a web page after I shut down Firefox and restarted and went back to the tab it loaded the web page as it had been the last time I visited.
This suggests that the problem I was encountering was that the cache was full and that rather than clearing out old content from the cache that once the cache filled up Firefox stopped writing new data to the cache.
I also note that the button labelled "Override automatic cache management" was ticked. That would tend to suggest that Firefox was being told not to delete old content when the cache filled.
I've now unticked the "Override automatic cache management" box and will see how I get on.

Similar Messages

My Photosmart C410 won't automatically connect to the Network

My Photosmart C410 won't automatically connect to the Network, I have to put in my password for the router every time I turn on the printer from the printer keyboard. Is there anyway that the printer will automatically connect to my network?

Tell me about your network - router brand/model, encryption type (WEP, WPA, etc) and ISP type (DSL, Cable, etc).
When you turn off your printer, are you totally removing power from it (like shutting off a power strip)?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

2013 MBP 2.5 i5 4Gig 500MBHDD boots slow. It finishes post in the same time as an identical MBP, and then hangs for 30 seconds on one of the ethernet adapters, before finishing the boot. Once booted it is normal.   Turning off airport changes nothig.

2013 MBP 2.5 i5 4Gig 500MBHDD boots slow. It finishes post in the same time as an identical MBP, and then hangs for 30 seconds on one of the ethernet adapters, before finishing the boot. Once booted it is normal.   Turning off airport changes nothing. Hardline adapter is not plugged in. Thunderbolt adapter is not used. Bluetooth is off. Did this out of box. Identical MBP boots to login screen in 36 seconds. Disk repair, permission repair, and safe mode boot have
already been done, no change. Boot time is consistent. Hangs at the same place each time. Right after post. Bad adapter?
Comments, solutions please.

... and so ... now a few days later, success.   I ran
your software but it told me nothing I hadn 't seen
in verbose boot.
Consistently, following good post, the boot hung
for 30 seconds on the adapters, (cards, chips, NICs.
Ethernet cards, whatever you prefer to call them)
either the airport card or the hard line. It would then
proceed at normal pace to the login screen.
Since it came out of the box that way, software
conflict was not a go. I guessed glitched driver or
fetch instruction. I zapped the PRAM (cleared
NVRAM) and reloaded the OS, updates, Garage Band,
iPhoto (one of Apple's true dogs in an otherwise
rare arena) iMovie, Photoshop, Lightroom, their
updates, and my files.   MBP pro now boots to login
in 31 seconds. Note I have turned off as much gee
whiz, rubber band scroll, global swiping and other
hubcaps and hood ornaments as befits how like
things ... and turned off all the Asian and other fonts
I will. ever use.
Best guess ... corrupt driver or corrupt fetch script ...
bad server squirt at factory load.
Thanks for your help, Cheers!

My music app shows it's still playing a song but it's playing next song without finishing the last song.

Since I had my iPhone 5S (I now have a 6 plus), I've had a problem with my iPhone Music app showing that it's playing certain songs but towards the end, it jumps to the next track, but without finishing the one it was playing. The music bar doesn't change - it shows as if it was still playing the former song. It happens randomly with certain songs and it appears all my playlists have been affected by this. I've restored the phone and restored both an iCloud backup (to rule out software issues that iTunes is copying over into the phone) and an iTunes restore from backup. I've also deleted entire albums and redownloaded them right onto the phone, hitting the exact same snag. I've also restored the phone and started it as a new install and hit the exact same snag. Any help would be greatly appreciated!

OK. Since no one replied I restored my Nano 2. It still does this. Can anyone say theirs doesn't? Stop the music halfway or anyplace inside a track. Let the iPod rest for a few hours. Hit Play again. You see the song you were on and the place where you were. It is in Pause mode. Hit Play again to continue the song. At this point mine skips to the beginning of the next track. If I left click the wheel, it skips over the previous to the one before that.
This does not happen with my 80G Video iPod. It holds it's place and the music continues.
This is an 8G black Nano.

How can I finish the last step in the 2 Day Plus Appl Express Developer

Hi,
I try to follow doing the steps the Chapter 8 How to Upload and Download Files in an Application of the 2 Day Plus Application Express Developer, after I had finished
the input to Oracel XE (all steps in this chapter and the procedure in 'Downloading Documents from the Custom Table'), I open the "run Page 1 icon" , the procedure seems no running and cause the error 'Page cannot be found'.
I doubt the type is wrong or correct "#OWNER#.download_my_file?p_file=#ID#".
Are there any one can tell me ?
Regards,
Simon Wong
Message was edited by:
user505611

Simon,
here is the full example. Please follow the steps closely. Input exactly what is written in bold characters (without the line numbers though).
Here we go (in a dos command box):
C:\WINDOWS\system32>sqlplus system@xe
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Aug 13 12:48:24 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
*** Show more detailed error information in the browser ***
SQL> exec dbms_epg.set_dad_attribute('APEX', 'error-style', 'DebugStyle');
PL/SQL procedure successfully completed.Now try to run the following url in the browser: http://127.0.0.1:8080/apex/hr.hello_world
This will give you the following error message:
hr.hello_world: PROCEDURE DOESN'T EXIST
DAD name: apex
PROCEDURE : hr.hello_world
URL : http://XDB HTTP Server:8080/apex/hr.hello_world
PARAMETERS :
===========Now continue with the sqlplus - session :
*** Switch session to user HR to create procedure hello world ***
SQL> alter session set current_schema=HR;
Session altered.
SQL> CREATE OR REPLACE procedure hello_world
2 is
3 begin
4 htp.p('hello world');
5 end;
6 /
Procedure created.
*** check to see whether the procedure was created properly ***
SQL> desc hr.hello_world;
PROCEDURE hr.hello_world
*** grant execute on procedure to account ANONYMOUS ***
SQL> begin
2 execute immediate 'grant execute on hello_world to anonymous';
3 end;
4 /
PL/SQL procedure successfully completed.
*** Switch to user FLOWS_020100 ***
SQL> alter session set current_schema=FLOWS_020100;
Session altered.
*** for testing, disable the security mechanism ***
SQL> CREATE OR REPLACE function wwv_flow_epg_include_mod_local(
2 procedure_name in varchar2)
3 return boolean
4 is
5 begin
6 return true;
7 end;
8 /
Function created.Running the url again should work now, the security mechanism is disabled.
If this works, we can enable the security mechanism again:
*** now create the function again, checking for the proper procedure name ***
SQL> CREATE OR REPLACE function wwv_flow_epg_include_mod_local(
2 procedure_name in varchar2)
3 return boolean
4 is
5 begin
6 if upper(procedure_name) in ('HR.HELLO_WORLD') then
7 return true;
8 else
9 return false;
10 end if;
11 end;
12 /
Function created.
*** remove the debugging information ***
SQL> exec dbms_epg.delete_dad_attribute('APEX', 'error-style')
PL/SQL procedure successfully completed.You don't need to restart any services inbetween the outlined steps and you shouldn't have to change any security settings in your browser. It is all done in the database.
If it still doesn't work, please post your error messages from the browser here.
Regards,
~Dietmar.

Firefox 32.0.1. Win7. When I click on a tab Firefox immediately refreshes the page. Before this the last copy of page stayed until I manually refreshed.

In the last couple of days since the last upgrade to Firefox I've noticed a major change in behaviour.
It used to be that when I started Firefox and clicked on one of my tabs I would be presented with the web page as it looked the last time I looked at it. I then had the option to refresh the web page either by forcing it to load again or by selecting an option within the web page.
Since the last automatic upgrade in the last couple of days ago when I click on a tab after starting firefox it's immediately going off and reloading the web page from the html address.
This has two problems:
On some sites I have configured information within the page about my preferences. Normally I click buttons within the page to go forward or back a page. With the new bejaviour I'm takne to default page and have to manually re-enter all my preferences and filters again.
Second problem is on many sites I can a list of where I was at the last time. I then know which articles I;ve already looked and can then remember where I was at the last before updating. With the new behaviour I don't know where I was.
How can I get the old behaviour back ?
I'm running Firefox 32.0.1 on up to date Win7 .

I've kept investigating this further.
I've now found that this is a cache management issue.
I found that the cache options (Tools-Options-Advanced-Network ).
The Cache file on Firefox was set to a limit of 350 MB and the Cache was using 350 MB of storage.
I tried clearing the cache.
After I cleared the cache I found that when I had loaded a web page after I shut down Firefox and restarted and went back to the tab it loaded the web page as it had been the last time I visited.
This suggests that the problem I was encountering was that the cache was full and that rather than clearing out old content from the cache that once the cache filled up Firefox stopped writing new data to the cache.
I also note that the button labelled "Override automatic cache management" was ticked. That would tend to suggest that Firefox was being told not to delete old content when the cache filled.
I've now unticked the "Override automatic cache management" box and will see how I get on.

I just bought my iphone 4s and i am having problem with the message tone,it hangs before finishing the tone hangs and then finishes,its irritating

i have a problem in my message tone,may be a bug,it hangs and plays itself please help

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Macpro 17inch just shut down while using. Tried removing battery and SMC to no avail. Have had this problem before over the last six months but would always restore. Now you just click on the power button front light stays on for 2 sec

Hi, My 17 inch Mac pro laptop just shut down and I can't get it to turn on again. This has happen multiple times over the last six months. Looked through the forum and tried removing the battery and resetting the SMC control to no avail. I was having issues also with the screen a month ago but that resolved by itself. When I took it into the genius bar for screen problems I was told I'd probably need a new CPU board because the vram may be going bad and they just don't fix that
problem. Have held off because of a potential $500 repair and awaiting ivy bridge technology. Does anyone in the community know how I can restart my portable. Right now you turn on the machine and the front light stays on for 2 sec and you hear the machine click off?

I think you may have already been told what the problem is. However look at this and maybe it will help:
http://support.apple.com/kb/TA25686?viewlocale=en_US
http://support.apple.com/kb/TS1365?viewlocale=en_US
http://support.apple.com/kb/TS1367
http://support.apple.com/kb/TS1587
Probably another genius bar appointment is the best way to exactly define the problem.
Good luck.
Ciao.

Hi, the minute is use the alpha tool, that round colorful ball comes up and pages quits right away

as soon as i use the alpha tool, page quits out of the program

Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About

In trying to download Firefox 4.0, it "paused" at 37% of the way and will not finish the download. Why?

I could not open NY Times articles today because Firefox would not let me. I reported this twice. I received a window telling me to update Firefox ~~ and I'm trying to do this. As I said, Firefox download4.0.dmg paused and will not finish the download. It's been over 10 minutes and I don't know how to proceed.

You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden, so you need to hide the Menu bar to get the new appearance.<br />
If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily.<br />
You can place the Tab Bar on top.
* View > Toolbars : [ ] Menu Bar
* View > Toolbars : [X] Tabs on Top

Photosmart c410 unable to print with Mavericks 10.9.3

up until the latest Mac OS X update (10.9.3 out May 25th 2014), i was able to print (wireless) without incedent. But since that update, i've been unable to print to that printer. My wife's HP laptop (running windows 8.1) prints fine to the printer (HP Photosmart c410). My Macbook Air recognizes the printer and connects without problem but when i go to print, the printer shows "printing...printer in use" but does not awaken the printer.
i have no issue printing to my Epson Artisan 810 so suspect the problem lies with a specific driver issue between 10.9.3 and the HP PS c410. any ideas? (i've deleated and re-added the printer but no change).

Hi Zedman435,
Only having the AirPrint driver tells me that there is something missing. Please complete the steps below.
Reset Printing System
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OKto confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click Utilities.
Double-clickDisk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer and download and install the HP Printer Drivers for OS X.
Now when you add the printer, you should have the HP driver to choose, do not select the AirPrint driver.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can the printer driver
Please let me know how this works out. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Problem using HP Connect with my HP Photosmart C410

I am trying to use HP Connect apps with my HP Photosmart C410 printer. I can add the device, but none of the apps seem to work with my printer It'a not THAT old. Any suggestions?
This question was solved.
View Solution.

HI beachgrl,
Welcome back to the HP Support forums. I understand that you would like to learn what printables are available for your Photosmart C410 printer in HP Connected.
Once you are signed into your HP Connected account, if you type the link listed below into the address bar on your browser it should take you to a page that shows the printables you already have on your printer. Below the "Recommended Printables" section there is a search function. If you type in your printer model it will list the printables available for the Photosmart C410a. The results will be grouped by category. I have included a screen shot.
The address you need to type into your browser address bar is https://printables.hpconnected.com
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

My 3GS crashes during phone calls over about 3 minutes, even after the upgrade to 5.0

My 3GS crashes during phone calls over about 3 minutes, even after the upgrade to 5.o

I've also got this annoying problem, but it seems to vary how long the phone wants to last before crashing - i think the longest conversation i've had with iOS4 is 15 minutes and it was an important phone call (my son was in hospital at the time and i was away on business)
i was hoping that iOS4.2 would fix the problem, but alas nothing but more crashing..
being a user of Apple products since 1984, having this trouble is pretty disappointing as i used to believe that Apple made a quality product..

Podcast Works on a web browser one minute and not the next.

We are having an issue with a Podcast working on Safari/Firefox one minute and not the next. Our teachers add Podcast to their web pages and then post it on our web server. Teachers, using Safari and Firefox, maybe able to open their podcast one day and then not the next. Has anyone had this problem? We have the most up-to-date Quicktime. Any information would be helpful.
We are running 10.4.9 on a Macbook.
Thank you,
Jennifer

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.

Using onestep dvd form movie (which I have done, successfully, many time before but now, the comuter ejects the disk 5 minutes before it is finished, and teh disk is blank, any thoughts anyone?mes before

with i dvd, using onestep dvd from movie (which I have done, successfully, many time before) but now the comuter ejects the disk 5 minutes before it is finished, and the disk is blank, any thoughts anyone?

with i dvd, using onestep dvd from movie (which I have done, successfully, many time before) but now the comuter ejects the disk 5 minutes before it is finished, and the disk is blank, any thoughts anyone?

My photosmart c410 pauses ~ 1 minute before finishing the last page of a job - also on a single page

Similar Messages

Maybe you are looking for