My photosmart C7250 all-in-one used to allow me to print black and white only, now it won't

My photosmart c7250 all-in-one used to allow me to print in black and white only if I changed properties to print in grayscale, black and white only. Now it says it won't print until I replace one of the empty color cartridges. I do no understand why the color cartridges are running out when I only use my black cartridge.

I still don't understand the difference between what I used to be allowed that I'm not allowed now. I was able to bypass the empty color cartridges by changing my print property to "grayscale" and "black only". Now I'm not allowed to bypass???

Similar Messages

Print black and white only, on Hp photosmart 5514.

Hi,
I dont like it at all that i have to contact support forums for something like this.
it use to be so easy to choose color or black and white printing.
Why have you made it so difficult ? Totally pisses me off but i leave that for the feedback section.
I have seen others with the same problem so it is not only me. now it has taken more than 20 minutes and i have to get to work soon.
So, how do I print black and white (or greyscale) using my newly bought hp photosmart 5514 ? ( is it smart ???)
I have been wasting a lot of ink now, very unsmooth not having it available in the ordinary printing window.
Like it matters, i use win 7 blablabla

I also hate that there is NO WHERE to find a simple answer. I have a "HUGE" XL cartridge of black only. Then I have to buy all the stupid little tiny color cartridges AND another little black cartridge.
Here I suppose: when I print in color, I use the color + small black cartridge.
When I want to print BLACK ONLY or GRAYSCALE, I choose that and it only prints using the XL big black cartridge.
WRONG. And no one can seem to answer this correctly, t but I know it does not work.
Remove 1 empty color cartridge whole printer won't work, even if I want black print only.
If all the small "color" cartridges + small blk cartridge is low but the BIG BLACK cartridge is showing full, still won't print BLACK ONLY.
I cannot PRINT with this stupid printer unless all cartridges have ink and are inserted. STUPID
I am now late to work simply because I cannot print a document PERIOD unless I have full color sitting there.
I just tried it multiple ways, grayscale, black only blah blah and it ALWAYS came out too- light, ie the sm blk cartridge was being used and it is admittedly LOW ON INK. WHAT is the big black cartridge doing there, saying it is full and not printing "black only" or "grayscale"?
The only article I could find that halfway enlioghtened me to the problem was HP page stating that "black" is never really black, to improve quality (thanks for making the decision for me) HP adds just a bit of color here and there to make black really black for paper quality paper.
SO SNARLING. Going to *bay to get refilled cartridges so I can print in a week. SNARL

How to force photosmart 6180 to print black and white only

I think the subject says it all. I would like to know how I can force my photosmart 6180 all-in-one to print black and white.
-Rod

Hi Rod
For the PS C6180 you should have an option in the print settings to Print in Grayscale, see step three in the link below
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00721052&cc=us&lc=en&dlc=en&product=1153494&tmp...
Kind Regards
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Photosmart 3210 only prints black and white??

Hi everyone,
I have an HP Photosmart 3210 that I just installed the lastest HP drivers onto my up to date macbook. Once finishing the install and completing the setup, I can only print in black and white / grey scale. Is this driver issue? Has anyone seen this before and can it be fixed?
Thanks!

Yes, this is a color printer and has 5 color cartridges and 1 black. All of them are full except for one which happens to be magenta I believe. Anyway this printer works fine with a Windows XP desktop and prints in color. I'm not sure if it's a driver issue or the fact it is connected to an Airport Express.
As a test I hooked the macbook directly to the printer by a usb cable and it still prints black and white only. I checked the settings and see nothing defaulting to print black and white. Also, now that I have this hooked up to the airport, now the Windows XP box will only print in black and white. This is really weird and think it's either an OS X issue or HP mac printer dirver issue.
Any other ideas?

Photosmart C7250 All-in-one

AFTER CLEANING THE PRINTHEADS, AND PRINTING A TEST-PAGE TO EVALUATE THE COLORS AND ALIGNMENTE, ALL COLORS ARE OK BUT THE VERY DARK BLACK BAND (THE TWO GRAY ONES ARE OK). ANY SUGGESTION OR RECOMMENDATION WILL BE MORE THAN WELCOMED.
jORGE

Hello @Joarlujo,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the black print quality issue that you're experiencing when printing from your Windows 7 computer to your HP Photosmart C7250 All-in-One Printer. Thank you for including the troubleshooting steps you have already attempted prior to reaching out for support. At this time it does sound like you have a defective black ink cartridge, or your HP Photosmart is experiencing a Printhead issue. The Printhead is the part that the cartridges fit into. It controls 'reading' the cartridges and putting ink on the page. If the Printhead is defective than you may experience cartridge detection, or print quality issues. The Printhead is a non-replaceable part within this specific model. Therefore, should the Printhead be defective a whole unit replacement would be needed. In saying that, there are troubleshooting steps that we can attempt to resolve this quality issue. Can I please have you follow the steps below.
Solution one: Use genuine HP cartridges:
HP recommends that you use genuine HP ink cartridges. HP cannot guarantee the quality or reliability of non-HP ink cartridges or refilled HP ink cartridges. If you do not use genuine HP ink cartridges, the steps provided might not resolve print quality issues.
Solution two: Check the ink levels, and then replace the depleted cartridge:
1. On the printer control panel, press the Setup button.
2. Press the Down Arrow button until Tools is selected.
3. Press OK.
4. When the Display Ink Gauge option displays, press OK. The ink gauge displays.
5. Please replace any low or depleted cartridges.
Solution three: Print a self-test report:
Load plain white paper into the input tray.
Press Setup.
Press the Down Arrow () to highlight Print Report.
Press OK.
Press the Down Arrow () to highlight Self-Test Report.
Press OK.
If the test page printed clearly, check the settings and media you are using, and then try to print again.
If the report or printout shows streaks, lines, or missing colors, continue to the next solution.
Solution four: Clean the printhead:
Load plain white paper in the input tray.
Press Setup, press the Down Arrow (), press Tools, and then press OK.
Press the Down Arrow () to select Clean Printhead, and then press OK. A test page prints.
If these steps resolved the issue, you do not need to continue troubleshooting.
If the issue persists, continue to the next solution.
Solution five: Align the printer:
Load plain white paper in the input tray.
Press Setup, press the Down Arrow (), press Tools, and then press OK.
Press the Down Arrow () to select Align Printer, and then press OK. A test page prints.
If these steps resolved the issue, you do not need to continue troubleshooting.
If the issue persists, continue to the next solution.
Solution six: Calibrate the color:
On the Windows taskbar, click the Start icon (), click All Programs, click HP, click the folder for your HP Photosmart, and then click the icon for your HP printer (). The HP software window opens.
Click Settings, click Print Settings, and then click Printer Toolbox.
On the Device Services tab, click Calibrate Color, and then follow the on-screen instructions. The procedure takes about two minutes and requires two sheets of paper.
Try to print again.
- Source
Please respond to this post with the result of your troubleshooting. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

I have an HP Photosmart C7250 All-in-one - Test Report - The wireless radio is not functioning

I have an HP Photosmart C7250 All-in-one and the wireless feature does not work. When I try to go through the Wireless Setup WIzard, the Test Report indicates the following - "The wireless radio is not functioning. Contact HP Support". Can you help me?

Let's reset the printer. Turn it off, hold the # and 6 keys while turning it back on. Go to Setup > Network > Wireless Network Test afterward to see if it worked.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I have an hp photosmart c7250 all-in-one the wireless radio is not functioning

I have an HP Photosmart C7250 All-in-one and the wireless feature does not work. When I try to go through the Wireless Setup WIzard, the Test Report indicates the following - "The wireless radio is not functioning. Contact HP Support". Can you help me?
This question was solved.
View Solution.

Let's reset the printer. Turn it off, hold the # and 6 keys while turning it back on. Go to Setup > Network > Wireless Network Test afterward to see if it worked.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Setup can't detect network printer Photosmart C7250 all in one

I volunteer for our local historical society. The person who did a lot of the computer maintenance work is not active at this time so I’ve begun to look at things.
There is a Gateway PC running Windows 7 64 bit home premium, a Sony Vio laptop running Vista 32 bit home premium, an HP Laser printer and (of most importance here) an HP Photosmart C7250 All in one printer.
Internet connectivity is via a dsl line with a combination modem/router. I think the modem/router is a Westell or an Actiontec through Frontier Communications (formerly Verizon in this area) but I’m not sure and I’m not at the museum now.
A couple of weeks ago I was able to connect the laptop to the network via wifi. My next step is to connect the laptop wirelessly to the printer so we can print wirelessly over the network. The printer was originally set up through a usb connection so I changed it to a wired Ethernet connection. The PC now successfully prints to the printer over the network. I downloaded the software and drivers directly to the laptop from the HP site and began the installation. When it got to the point of finding the network printer the software couldn’t detect it. I then put in the ip address for the printer (from the network info printed out from the printer) and it still couldn’t find it.
This same situation occurred when I tried to set it up on my personal laptop (Win7 , 64 bit) as well. Setup couldn’t detect the network printer, even after searching for the network ip address.
Since the printer is connected to the network (router) via an Ethernet cable, I don’t have the wifi radio turned on in the printer. This shouldn’t make any difference.
I’ve searched the forums and haven’t seen anything that is like my issue.
I don’t what else to do. Hopefully someone will give me some advice on what to do next.

Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
What does it say?
If the network has Wireless Isolation turned on it will prevent wired devices from seeing wireless devices. Do you have access to the router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HOW TO PRINT BLACK AND WHITE ON HP PHOTOSMART 7510 USING MAC?

HAVING SOME PROBLEM TO PRINT BLACK AND WHITE WITH MY HP PHOTOSMART 7510. SPENDING MONEY BUYING EXPENSIVE COLOR INK BECAUSE OF THIS ISSUE. WOULD LIKE TO KNOW WHAT TO DO TO PRINT JUST BLACK AND WHITE PLEASE. I HABE A MAC OS X 10.10.4 THANK YOU.

Welcome , I would be happy to provide you with more information about printing with black only on the Photosmart 7510. First, here is how to make sure you are changing the black only settings; In the software program that you are trying to print from, click File, and then click Print. (or Command+P)I have put a red box around the drop down in the image below, from this menu you want to choose Paper Type/QualityIn the Paper Type/Quality tab, click Color Options, (usually you have to click the little arrow, again outlined in red on the image)If you want color printouts, make sure that Greyscale is selectedChange the Greyscale mode to Black Ink Only or Black Print Ink Cartridge OnlyClick Print to try the print job again. Next you might want to read about how your ink supplies are used; The following information is from this article; Ink Usage in Inkjet Printers - it discusses several aspects of ink usage with HP printers. Ink is used in a number of ways throughout the inkjet printing process. In general, ink in an ink cartridge is used for printing documents, photographs and other such materials. Some ink, however, must be used to maintain the health of the print head; some ink is residual; and some ink evaporates. HP offers two general inkjet print head designs: integrated into the ink cartridge (Integrated Print Head: IPH), and a long-life print head integrated into a printer which has Individual Ink Cartridges (IIC). Just so you know, your printer is an Individual Ink Cartridge (IIC) setup. Some color ink may be used when printing black text-or-graphicsThere are several circumstances when color ink may be used—primarily to improve print quality, and sometimes to improve printer reliability—even if the document appears to be only black text-and-graphics. Many HP printers utilize chemical interactions to improve the quality and permanence of plain paper black text-and-graphics by adding small amounts of color ink to certain black areas. Some dark images which look black may contain a combination of black and color inks. For black and white images and photos, a blend of colors called "composite black" may be used to achieve significantly better image quality and smoother gray tones than can be accomplished with black inks alone. Some inkjet printers utilize pigmented black ink, which is incompatible with some inkjet photo paper. In this case, dark or black areas are made up of color inks. Page yield testing is conducted with all cartridges (black and color) installed in the printer. For more information see Inkjet page yields . For users who wish to print utilizing just black ink (despite the reduced print quality), many HP printers offer options. For example, a driver color setting (by selecting "print in grayscale with the black cartridge only" in printing preferences) specifies printing using only black ink. In addition, many IPH printers can operate in "reserve mode," which allows the user to continue to print with just the black cartridge when the color cartridge is removed or not installed. In HP IIC systems, all supplies are required to be installed in the printer for the printer to function. So your IIC unit will use those colour inks to maintain itself, keep air out of the printhead and keep your print quality legible. Please let me know if these steps resolved your issue, or if there is anything else I can do to help. I look forward to hearing from you! Thanks,

HP 8500 All-in-one printer - how can I print in black and white only (to save color ink)?

I want to be able to select the option of printing in black and white only to save color ink. How can I do that?

What operating system? You can generally find an option for "Print in grayscale" and "Black ink only" in the Color or Advanced tab of the Printer Settings.
Some color ink will still be used to keep the printheads from clogging, see here for information. (The Officejet 8500 is an IIC printer in the vocabulary of that page.)
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to set black and white only on Photosmart Plus B210a

I just buy my HP Photosmart Plus B210a at staples on 25. Usually I will just print some word documents，I want to set to use black and white only (black ink only), but can't find it.

Hi espressoking,
I understand that you are looking to print grayscale from your iPad.
I have included 2 different documents about using Apple's AirPrint. The first one is from Apple and the second one is from HP. If you find that the option to print in grayscale isn't available with AirPrint then I suggest you check out HP's ePrint app. It gives you the options to print 'Color, 'Grayscale', or 'Black Only'.
For further reference I have also included a document about getting started with the HP ePrint app.
AirPrint Basics from Apple Support
http://support.apple.com/kb/HT4356#How_to_Print
How to Use Apple's AirPrint Over a Wireless Network
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02623193
Getting Started with HP ePrint Mobile Apps
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01616126
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Hp photosmart 7150 only prints black and white with mac

My hp photosmart 7150 only prints black and white with mac. I have tried installing and uninstalling, installing drivers, but no change.

Hi,
You did not mentioned your Mac OS X version, however I assume you have one of the latest versions.
The Photosmart 7150 is not supported on Mac OS X v10.6, v10.7, v10.8 or v10.9 and therefore it is more than likely that there are no drivers for your OS and the used Generic Driver only provide B&W printing.
Although it is not officially supported you may check 3rd party solutions such as the 3rd party HP-IJS print drivers which list your printer as supported.
Be sure to install any of the 3 required downloads, then click the plus sign under Printers & Scanners, click the Use drop down and click on Select Printer Software.
Search for your printer model form the list and select the driver, I believe that may work:
http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/hpijs
Although it only list up to 10.8 (Mountain Lion) it should also work on Mavericks from my experience.
Hope that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to print in black and white only on hp photosmart 6520

Cannot find a place to select print in black and white only on my HP Photosmart 6520 printer.
It prints color just fine, but sometimes I do not want to use my color cartridges. I selected B&W instead of gray scale, but cannot stop the color printing.
Thanks

Hi,
Please try (for Windows):
Double click printer icon on desktop,
Clich Set Preferences
Click Advanced
Under Grayscale, select Black ink only
Click Ok/Apply ..
Please note: the printer still need color inks during warming up process.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Printing in black and white only from the internet with a photosmart 7510

Hi
I have and photosmart 7510 and i cant figure out how to change the setting so that when i print off the internet it is black and white only, that way I can save my color cartridges. In particular when i print coupons from the net, I only need them to be black and white.
Thanks for your help!

@432vero,
Go to your printer preferences on your computer.
1. Click Start menu
2. Choose Devices and Printers
3. Right click on the printer
4. Choose printer preferences
5. Choose ADVANCED
5. Choose "Print in all black text ENABLE" or "grey scale"
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

I made some amendments to my colour settings in PS CS5 and now everything prints black and white. Please help me to reset all the settings to default

I made some amendments to my colour settings in PS CS5 and now everything prints black and white. Please help me to reset all the settings to default. This was after I tried to implement the steps set out in Real World Photoshop CS5. I stuggele to match the colours of my two screens, the one a laptop and the other a LCD and the printer, even after calibration with Spyder 3. Really lost at present.

Tap Settings / Wi-Fi. Tap the blue circle with an arrow to the right of your network then tap: Forget This Network.
Restart the iPad. Tap Settings / Wi-Fi. Tap the network name again then type in your password.
If that didn't help, try here > Apple - Support - iPad - Wi-Fi Assistant
And try turning off your router for 5 minutes, then turn it back on. Try typing in the password again.

My photosmart C7250 all-in-one used to allow me to print black and white only, now it won't

Similar Messages

Maybe you are looking for