My photostream stays empty in Apple TV
I work with Aperture3 for photo's.
My photostream in Aperture3 has over a 1000 pictures.
However when I go to photostream on AppleTV, it keeps indicating zero photos.
In Itunes I have homesharing on, also on ApplTV
I assume these photos are over 30 days old. Photo Stream only holds photos on the server for 30 days meaning they got pushed to your mac but are no longer available to be pushed to ATV. Upload a photo to Photo STream now and see if it syncs.
Similar Messages
-
hello my name is kirstie, i updated to firmware 4.2.1 .....my iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat, every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats the same problem?? (if i turn the phone off my pressing the two buttons it wont keep rebooting, its only when i leave it after turning it on)
I have reset the phone, full firmware restore, even downgraded back from firmware 4.2.1 to .3.1.3 official by using dfu mode and still doesnt fix.
(i correctly got out of dfu mode after the downgrade)
i can enter dfu mode and recovery, and update through itunes with no problem, but it doesnt fix the problem,
i have searched and found no answer to this problem, every option availible to try that i know of i have tried and failed. i dont care about preserving my content i just want a fix. i have a good understanding how to operate software on a computer and shouldnt be too confused by any advice given, so plz even if the answer is very complex i wish to try anything, please help me to get my iphone working.Anyone have any suggestions? or is everyone else just as clueless as me !
-
will itunes 11 work with windows xp , I have ended up with this new version after accepting an update and now although I can view my library I can't play anything and since synching my ipod it is empty. Apple support can't seem to get it's head around the fact I'm on a PC keeps asking for an apple serial number, Help!!!
Morning gedeye,
Thanks for using Apple Support Communities.
System Requirements
Windows XP Service Pack 2 or later
32-bit editions of Windows Vista or
32-bit editions of Windows 7, and Windows 8
For more information on this, take a look at this article:
http://support.apple.com/kb/DL1614
Best of luck,
Mario -
my ipod doesn't allow me to do the thiings it used to. It would change the time and date and everytime i'd turn it to the correct date it would go back when i clicked a new app. it wouldn't load apps corectly because of this date and time problem. So i decided to erase everything and start fresh. But now it won't even load properly it just stays on the apple screen with the loading spin thing stuck. someone please guide me into fixing this problem
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
ipad 2 screen is black . when i press the power button it takes a screen shot but i have no functionality . tried holding the home and power button together but the screen just flicker and stay black . no apple icon shows up. help please
Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device -
I can't get the AirPlay alert to stay off my Apple TV. I'm using AirPlay so it's not trying to connect. It's an alert that tells me what AirPlay is. Anyone know how to get rid of this?
Welcome to the Apple Community.
Settings > AirPlay > Conference Room Display > Off. -
I can start my iPod but it will only stay on the Apple icon screen for 5 minutes and then shuts off, what do I do to fix this problem?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Exchange 2013 Recoverable Items\Versions folder stays empty
Hi All,
I need some clarifications on Recoverable Items Folder.
Versions: If either litigation hold or single item recovery is enabled and If a user modifies an item, a copy of the original item is placed in the Recoverable Items\Versions folder, by a process called copy-on-write page protection. This
folder isn’t visible to end users. (Visible via MFCMAPI though)
I don’t seem to be practically achieve this with Single Item Recovery Enabled.
The Versions folder stays empty irrespective of edits(saves) I make on emails located in Inbox, Deleted Items or elsewhere.
I would really appreciate some light here on how to get this going.
NOTE:- Deletions and Purges folder are working just fine.
Regards,
Satyajit
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.Thank you Allen and Shweta for your response.
Sorry for not being clearer earlier. Below are the current settings for the user.
I have already enabled SingleItemRecovery for the user and checking the 'versions' folder using Get-MailboxFolderStatistics cmdlet and MFCMAPI tool.
What I want is to get the versions folder count\size to increase, how can I get that tested.
Please guide me through the steps to make edits on the email items to make this happen.
User details below:
[PS] C:\>get-mailbox testuser1 | fl *Sing*,*retain*
SingleItemRecoveryEnabled : True
RetainDeletedItemsUntilBackup : False
RetainDeletedItemsFor : 14.00:00:00
[PS] C:\>Get-MailboxFolderStatistics -Identity testuser1 -FolderScope RecoverableItems | ft Name,FolderPath,FolderandSubfolderSize,ItemsInfolderAndSubfolders -auto
Name FolderPath FolderAndSubfolderSize ItemsInFolderAndSubfolders
Recoverable Items /Recoverable Items 598.9 KB (613,312 bytes) 46
Calendar Logging /Calendar Logging 0 B (0 bytes) 0
Deletions /Deletions 389.1 KB (398,446 bytes) 28
Purges /Purges 209.8 KB (214,866 bytes) 18
Versions /Versions 0 B (0 bytes) 0
The Versions folder stays empty irrespective of edits(saves) I make on emails located in Inbox, Deleted Items or elsewhere.
Regards,
Satyajit
Please“Vote As Helpful”
if you find my contribution useful or “MarkAs Answer” if it does answer your question. That will encourage me - and others - to take time out to help you. -
HELP!!!
My iPhone stay in the Apple Logo, i already restore it.
i have a iPhone 3GS running on IOS 6
Please help me!!This fixed my 3gs - take screen off un attach screen cable 3, boot phone, if white screen hold lock button and home button together for 10-15sec.
-
i've trying all night long. after i reboot my phone, it can't start up anymore. it just restart for a several times and it stay at the apple logo which is the start up screen. What is happening to my phone???
You need to use recovery mode to restore:
http://support.apple.com/kb/HT1808 -
My MacBook Pro won't start up (stay in the apple with a loop screen)
Yesterday night, I reseted something (OptionCommand+RP) Then, the second time I turned on the mac, it stayed in the apple screen with a loop for 1 hour, then I forced to turn off it. Next morning, the problem still there.
Anyone knows the solution?Boot from your system install DVD, run Disk First Aid from your Disk Utility and repair your permissions.
If that does not work, try an Archive and Install.
Mac OS X: About the Archive and Install feature >>
Dave M.
MacOSG Founder/Ambassador An Apple User Group iTunes: MacOSG Podcast
Macsimum News Associate Editor Creator of 'Mac611 - Mobile Mac Support' -
I want to make a new gamecenter account but I want to stay with my Apple ID
I want to make a new gamecenter account but stay on my Apple ID
In case you're not clear - iPad/iPhone storage, and iCloud storage, are totally separate. Buying more iCloud storage does not give you more storage space on your device. Your device has a fixed storage space for apps and data (e.g., 16GB - which is more like 12GB in real terms). iCloud storage just allows you to store more documents, mail, photos, etc, in the cloud.
Matt -
Ipod touch wont load past apple screen. I have tried resetting by holding home button and on/off but after it resets it still only loads to the apple screen. When I plug the device in It stays on the apple screen and itunes does not recognize it? I fear it may be stuck in some sort of reset loop which is stopping itunes from recognizing it. How do I go about the process of sending it in to apple if I cannot find a fix? Thank you in advance, it is greatly appreciated!!
- See if placing the iPod in Recovery mode will allow a restore.
- If not successful and you can't turn the iPod fully off (that is required to place in recovery mode), then let the battery fully drain. After charging for at least an hour try the reset, restore again
- Then time for an appointment at the Genius Bar of an Apples store. -
My ipod stays at the apple logo whenever i try to turn it on and Itunes doesn't recognize it when i plug it in to the laptop. What do i do?
Try This...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy...
Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
HypRetrieveRange toggles POV on, Sheet Type stays "Empty"
Hello,
i used the following code to test this issue:
Sub Example_RetrieveRange()
sts = HypRetrieveRange(Empty, Range("C1:R47"), "R_PL_Main")
End Sub
Result:
1. The data is refreshed successfully
2. The POV is toggled on and on pressing the POV botton the first hidden row is not shown again
2. no Smart View Named Range is created
3. The Sheet Type stays empty
4. manual refresh of the Sheet does not work
Does anyone of you face the same issues? I think with Version 11.1.2.5.200 this was still working.
I am using Version 11.1.2.5.400 on Office 2013
Many thanks for any help. :-)
DavidAkos,
I used the Dynamic Link View functions in an Excel 2003 add-in early last year (I don't remember the release of SV) and although my data source was Essbase, not HFM, Dynamic Link View functions didn't work for me, either.
Hyperion's tech support organization was still extant, so I could log issues -- I think I received eight defects that went along with DLVs (I wanted to use HypGetColItems, HypGetPOVItems, and HypGetRowItems and then use the Set functions).
Some of the bugs were really out there, e.g., they depended on the dimensionality of the database and the location and number of nested columns and rows. I think that might have been a bug with HypRetrieveRange and the fact that there wasn't an enabled connection on the sheet (sheet was connected through HypConnect, had to use HypSetActiveConnection, but that too was buggy).
What I ended up doing in the end -- and it was definitely a kludge -- was to rotate everything on to the sheet and then use HypOtlGetMemberInfo to return dimensionality into an array which I could then interrogate and figure things out. You can guess that this wasn't too fast (to put it mildly). Unfortunately, that might be your only option.
I'm on the road now, so I don't have access to my files, but if you really want them, I have the defect "prizes" at home and I can post them over the weekend. It is also possible that Oracle identified the bugs in Metalink/the read me(s).
One other thing you might try would be to get the very latest and greatest version of SV and see if that fixes some of your bugs -- there shouldn't be any issue with a new version of SV against an older version of APS.
Regards,
Cameron Lackpour
Maybe you are looking for
-
Discoverer report parameters stored in EUL_US
Is there any table where discoverer stores the parameters for each run? e.g. EUL5_QPP_STATS stores the run timings. We want to analyze the user trend of information retrieval. Knowing these stats would be a great help.
-
when i try to get a print out for excise invoice ..........nothin is happ..........i have checked settings in NACE i have assigned output J1i0 in vf02 and tried to get the print out from j1ip pls assist Regards Maddy
-
Are there any scanners that work on a MacBook Pro with Mac OS 10.7.5?
I was using a CanoScan Lide 35 scanner on my laptop just fine until a couple of weeks ago and now it is hit and miss with it. I was looking for a scanner that would be compatible with Mac OS 10.7.5 and I haven't found anything that looks like it wor
-
HI, is it necessary to "clean" your Mac? I'm not sure what that means or what it does but I've been getting ads that offer to clean it. Would doing that make surfing the web faster? Thanks!
-
I having a problem where my iMac will randomly shut down without warning. Doesn't matter what app I'm using. The weird thing is that it ONLY happens after it has gone through a sleep/wake cycle. It doesn't happen after doing a cold start. The random