My Pictures have stop loading or not showing up??

Hello Community
I have a question about Safari
Pictures are not loading anymore??
Blue Question marks are in place of pictures.
For example apple.com has no pictures at all or Facebook
I would like to have this working.
I have looked on youtube and the web but can solve the problem.
My Safari is Version 6.0.4 (8536.29.13)
My Mac is running OS X

This looks like a network issue.
Power off the router. Unplug it from the main. Wait few minutes.
Plug it back. Power it back on. Wait until all the lights are lit properly.
Restart the computer. Now try. If this does not help, contact your ISP.
"One more thing" to consider.
http://support.apple.com/kb/TS3408
Best.

Similar Messages

HT1351 The music tracks I have up loaded to icould shows up on my ios devices but I cant play them ? Has anyone had a similar problem / knows a solution.

The music tracks I have up loaded to icould shows up on my
ios devices but I cant play them ? Has anyone had a similar problem / knows a
solution.
The same tracks play fine on apple tv

Done that . Been using paid service for a long time . Works for all my content just not working for 3 albums I added recently .
they show up on all my devices But just can't play them . Any suggestions ?

TS1702 IBooks has stopped loading files. Shows them and then they disapear .

IBooks has stopped loading files. Shows them and then they disapear .

Well, you can try this: right click the file, go down to encode file, and reencode it for the Mac.
Hugh

Full picture photo shooting details does not show up

Hi everyone,
Normally when I shot a photo and in the photo viewing mode I can select "details" to see the full details of the captured photo such as shutter speed information. However, recently I found that the information does not show in full like in the past. The shutter speed an some other details are diappeared.
How can I bring this back
Methee
Solved!
Go to Solution.

@alexdon thank you for your advice
I have tried it in safe mode but still the details of the captured photo does not show in full. I have attached a screenshot with this post which you can see that the details are very short.
Also, I have tried also a factory reset but it does not work at all. Possibly the PC Companion repairing that I did it last time might had some unknown error due to my home Internet connection was not stable. So, the PC companion repairing version of software might be permanently modified into the factory software. So the the factory reset does not work.
Anyone has the same problem like me? or it is normal with the current Sony updated software. I am sure last 2 months ago when I bought Z3 it was not like this. And this is an annoying problem for me as I always use Z3 camera in manual mode and always make use of the first picture shooting details such as ISO, speed shutter, etc for re-shooting a second better photo.
Anyway, I will do a PC companion repairing again tomorrow morning, then I will post a result
Below is the screenshot that I shot a photo in safe mode using manual camera mode at 20.7 MP, auto ISO
Then I openned the gallery in safe mode and see the details of the captured photo. You can see that there is almost no important details.
There are only the width and height and then the flash is on or off.
Thanks Alexdon
And soory if my English is not good!
Methee

LR3 camera profiles loaded but not showing in develop

I checked in - documents and settings\all users\application date\adobe\camera raw\camera profiles and Nikon D700 and many more seem to be loaded. However these do not show up in camera profiles in "develop". Anybody any idea why not ?

Hi Beat. I am shooting with a D700 in raw. In the develop area of LR3 and under "calibration" there is "profile: ". In the drop down menu I currently see ACR 4.6 / Adobe standard/ Camera D2X mode 1,2 and 3. It also incudes Camera landscape neutral / portrait / standard / vivid. I normaly use Camera standard as this gives me about what I want, but I have only had LR3 for a couple of weeks now and am experimenting.
If you go into the Adobe LR3 programme under documents and settings and get to camera profiles you see two options under "camera profiles" -- ADOBE STANDARD / CAMERA
CAMERA is from Adobe shipped with LR3 which has 61 cameras showing which are Canon/ Nikon (to include D700) / Pentax and Leica.
IF as you say LR3 knows I am shooting with a D700, why does the camera profile for D700 not show in LR3 in develop and in the area stated in my first line above, or am I misunderstanding somethig here ?
All the best Alan
London UK.

HT1212 How do i restore my iphone 4 when it does not have current IOS and i have forgotten passcode. Not showing in itunes but has connect to itunes logo on screen???

I previously had an iPhone 4 which has since been put away in a drawer now that I have an iPhone 5. I would like to give my iphone 4 to someone else to use but could not remember my passcode - have tried a few times (I believe I have one more try before it gets disabled - so I have stopped trying). Read somewhere that you can just restore your phone which works for me as I wanted to clear it anyway. When I connect my phone to itunes and clicked on restore it said update and restore which I clicked on and left it to do its work. However, a while later an error code popped up saying that it could not update or back up the phone as the phone was locked . Now my phone just has the itunes logo on it but when I connect the phone to the computer and I manually open itunes, my phone is not recognised.
What can I do? Please help!!!

Hi Shelley1284,
If you are having issues restoring your iPhone, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden

Acrobat Plug-in loading but not showing in menu

I had developed an small plug-in in C++ using Acrobat XI SDK for Adobe Acrobat X pro.
the plugin works 100% in my development machine.
But when I copy the api file into other users computers the plug in does not show in the menubar.
when I generate a system report in Acrobat, the plugin is showing as loaded, but it doesn't show in any menu.
any idea?
someone told me that I need to register a prefix for my plug in, but I cannot find any location to register.
thanks
Oscar

Certainly you need to register a prefix, or you may duplicate the plug-in ID, menu ID, and selector and tool IDs from samples or other plug-ins.
But you can quickly test for this problem by removing all other plug-ins.
Check the "only registered plug-ins" option is off.
I can't advise using the Acrobat XI SDK for making Acrobat X plug-ins. Traditionally, uplevels SDKs will make plug-ins that don't load in older versions of Acrobat.

There are songs that I have purchased that are not showing up in my iTunes or in my cloud.

I purchased these songs a couple years back maybe in like 2010 maybe even before that. When I brought a new iPhone and Mac I assumed all of my music would be in my iCloud but there are multiple sons that I have purchased that are not there. When I look on the ITunes Store it will say that they have been purchased but doesn't give me then download option. What should I do?

also these do not even show up in the "purchased" folder in my library. How do i resolve this problem?

Pictures on web pages do not show up in Firefox

I've created several iWeb pages with images and movies. I have an uncle who lives 1700 miles away who has an older iMac running Panther 10.3.9 and he is using Safari (apparently Panther cannot run the latest version 3 - he's either running version 2 or 1, whichever newest version Panther can support) - his iMac is a 700 mhz G3 model from 2001.
He cannot see any images in any pages I have created. No movies either. He has Verizon fios as his internet connection - very fast and robust - but I wonder if his system is too old to handle a lot of sites such as iWeb created sites.
I also have discovered that Firefox cannot display the images at all either!
Anyone know of these limitations?

Pictures have always been visible in Safari version 3 and, yes, they are JPEG.
I noticed that Firefox 3 cannot display the pictures but Firefox 2 does.
Same results with older versions of Safari (no pictures)
So the problem browsers so far are Firefox version 3 (beta) and Safari version 1.
I'll have to try Seamonkey, Camino, Opera, etc. to see what Safari 3 and Firefox 2 have that the others don't. Could it be a Java thing?

Why are some of my songs that i have downloaded into itunes not showing in the cloud?

why are some of my songs that i have downloaded into itunes not showing

If you have content eligible for icloud then you can stream it directly. Of course any local content requires your computer on and running iTunes to be able to see your library.

I have iPhone 4s but not show face time logo on my home screen and my settings.. Plz help me..

my face time app is not waiting and not show in my iPhone 4s and in settings.. What can I do ... Plz help me

Do as the image on the screen suggests, connect the device to a computer running iTunes and restore.

A webpage suddenly stops loading and just shows 'connecting...'. Opening new webpages in new tabs in the same window or in a new window gives same problem, while IE does not have any such problem opening the same page simultaneously

this issue is not limited to one website, it seems to be problem with the browser or possibly any plugins but not any specific webpage

The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
Try to decrease the value of the pref <b>network.http.max-connections</b> from 255 to a setting like 30 as used in Firefox 3 versions.
*https://support.mozilla.com/kb/Firefox+never+finishes+loading+certain+websites

Windows Service Manager 32-Bit Has Stopped Responding/iPod not showing up in iTunes

Hello,
I've scoured this forum for answers but I cannot find any result that works. I have an iPod classic that I've connected to my Gateway running Windows Vista for over four years without issue. When I was using iTunes 9 the other day, I plugged my iPod into my computer, but it only connected to My Computer and didn't connect to iTunes and update my iPod accordingly. So, the iPod is charging and the iPod is showing the "Connected, Eject before disconnecting" screen, but it isn't adding new music (which kind of defeats the purpose of buying new music). I thought it was because I was using 9, so I downloaded iTunes 10, but the issue still popped up.
This hasn't pop up today after I installed 10, but back when I was using iTunes 9 the following error came up on my computer: "Windows Service Manager 32-bit Has Stopped Working." Now, no error messages pop up, even though the problem persists.
I've tried suggestions in this post as well as in this post. Also, with the fix being recommended in those threads to change the code in Notepad by clicking "edit" under the System tab under My Computer? There's one problem - there is no edit button on my options. I've included a screen grab to prove this.
I don't know if the relative age of the discussions makes any difference - maybe a new fix has com up and i'm just not finding it? Plus, since this issue began with iTunes 9, I can't help but feel like getting rid of iTunes 10 is going to help the issue, either.
This is incredibly frustrating, not being able to add new music to my iPod, so if anyone can help me out, I would greatly appreciate it, as previously recommended ones aren't useful.
Screen grab of iPod connecting to My Computer, but not iTunes:
Screen grab of the lack of an "Edit" button in the place to edit codes as recommended in previous topics:

One again shamelessly asking for help

Interactive Report Loader symbol not showing in M$ IE

Hi all,
I came across a strange problem:
Using APEX 3.2, I created a page that contains an interactive report plus a second region below where I display additional info depending on which row of the report has been selected. All working fine so far. In the mentioned additional section, i placed some buttons triggering on-demand processes which take sometimes some seconds to return. To show that the process is running, I want to display some kind of "sand glasses" and came across the APEX IR Loader animation.
The javascript function triggered when pressing the button show something like this:
function doSomething(pThis, pValue)
$x_Show('apexir_LOADER');
StartOnDemandProcess(pThis,pValue);
$x_Hide('apexir_LOADER');
return;
This is working fine when using FireFox 3.5: The animation gets displayed when the process is starting and hides when it is finished.
Strangely enough, when viewing the page with Internet Explorer (v8), the animation is not shown here, but is when pressing the standard "next page" button of the interactive report.
Also, if I put a window.alert() right before the StartOnDemandProcess - line, the image is shown, but freezes immediately when the MsgBox has been clicked away.
To me, it looks like that I missed something in trying to mimic the showing of the Loader image.
Any hints how to force IE to do the same as Firefox here are welcome!
Regards,,
Dirk

Hi Simon
When we move the report to the new server it only shows the browser scroll bars. It doesn’t show the report scroll bars.
We actually redeployed the reports to the new server.
We were investigating this a bit further this morning and discovered something interesting. On the New Server, when we access our reports using the ip address we have this problem
but if we use the web address it works fine. On the old server when we access the reports using both the ip address and web address they are both fine. Hope this helps.
Unfortunately I'm on leave now until Tuesday, so I will be unable to do any more testing until then.

The Stop button does not show except when I'm customizing settings

I have just upgraded from FF 3.6 to FF 8. The Stop button (X) does not appear between the Reload and Home buttons.
However, if I right click the menu bar and select Customize... , the X appears as it should, then disappears again when I close the Customize... box.
Thanks for your assistance. This may be tied to the other error I'm receiving:
[https://support.mozilla.com/en-US/questions/894055 TypeError opening FF 8]

Thanks, SafeBrowser. Step 3 did the trick!

My Pictures have stop loading or not showing up??

Similar Messages

Maybe you are looking for