My "pictures" in the movie have text-I want them to scroll slowly from upside to downside-
My "pictures" in the movie have text…
I want the pictures slowly scroll over from upside to downside
so that one is able to read the text.
I made this happen before in an other I movie project, but I don't remember HOW!!!!
Who is able to help?
AppleMan1958 and Klaus;
Your information wasn't usefull untill now; I understand what you meant to say. But this isn't the problem.
Perhaps you can help me anyway:
Here you see one of my dia's (it's an example, the most have a picture and text together)…
perhaps you'll understand the problem now:
the picture/dia in itself has text.
When I made the Dutch version I succeeded to make the pictures scroll slowly from the upside untill the downside of the image, so that anyone is able to read the whole text.
Now I'm preparing to publish the English version but I completely have forgotten HOW to get the pictures/dias scrolling down slowly in the same way.
In my present movie they fade away or come to me from the centre of the images/pictures and in that way one can't read the text.
I remember it was really simple to change it…but…I really can't find it back…
I sincerily hope you will be able (even with a big smile, because I must be a dummy ) to help me!!!!!
Similar Messages
-
What do I do if the audio is off from the picture, during the movie that I downloaded from Itune
Depending upon what country that you are in (films can't be re-downloaded in all countries) then try deleting the film from your iTunes library and redownload it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes.
If you aren't in a country where you can re-download films or if it re-downloads with the same problem then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
When I connect my iPhone (5s) to my computer it says that it's storage is full and that I have over 4,000 pictures even though I have deleted all of them. It won't allow me to add music or anything else either because it says my phone is full. I have restarted my phone and the computer multiple times, but it still tells me that my phone is full.
iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup?
-
Hi Mark
I have downloaded 449 songs and i can not seem to get them all on my i pod it will only download 150 and the rest all have exclamation marks against them, could this be from my old i pod and how can i get to themThe exclamation mark means the file is no longer where iTunes expects to find it. This can happen if you or some other software moves, renames or deletes the files. Select an affected file and press CTRL-I to Get Info. Look at the summary tab and the entry near the bottom that says Where: This will start file://... and gives the last known/expected location of the file. The last part of that path will be of the form <filename>.<ext> where the <filename> is typically <track no.> <track name>. Search your computer for the specific filename to see if you can find where the file has been moved to. Ideally just move it back to where iTunes wants it to be. With luck you'll find that a bunch of folders has just been moved to the wrong place and you can move them back as a job lot.
tt2 -
My imported movie shows up in the event library under 2006 date, month of march, the movie name. I want the movie to show up in the event library under the date I choose and the movie name. How do I do this?
rogerhermans wrote:
I did change the name of the event. I cannot change the date of the event in the Modify command. The date and month was selected by the system as I did not name my event to start with. I now want to change the date (from 2006 to 1987) , delete the month and show the event name. I want the event library to post all my events by year (specified by me) and name of event.
you can change the date, so that FCPX categorizes it properly. First delete the clip(s) from FCPX, but not from your computer entirely, make sure you have the originals somewhere.
Open a terminal window and use the following command:
touch -t 198711280800.00 <path/filename of clip>
Where the format is: (use leading zeros if necessary for date & time)
first four digits: year
next four: month and day
next four: time of day (in 24 hour format)
next 2: seconds as a decimal (this is optional, if you leave it off you will get 00 seconds)
The above example will change the file date to Nov. 8, 1987 08:00:00 AM
This will change the created, modified and last access dates of the clip/file.
Then reimport the clip(s) and FCPX should categorize it properly. -
I HAVE A SOURCE TABLE WITH 10 RECORDS AND TARGET TABLE 15 RECORDS. MY QUESTION IS USING WITH THE TABLE COMPARISON TRANSFORM .I WANT TO DELETE UNMATCHED RECORDS FROM THE TARGET TABLE ?? HOW IT IS ??
Hi Kishore,
First identify deleted records by selecting "Detect deleted rows from comparison table" feature in Table Comparison
Then Use Map Operation with Input row type as "delete" and output row type as "delete" to delete records from target table. -
Since yesterday my Apple TV will not load the movies or tv at all. I select it from the home screen, it goes black, tries to load then goes back to the home screen. YouTube and Netflix works though. I've reset the Apple TV and the modem. No change. Any ideas what the problem is?
Apple TV: Unable to access Movies, TV Shows, or other iTunes features after updating
http://support.apple.com/kb/TS4526 -
How do I get iTunes to recognize a new device if I accidentally did not hit new device when I first hooked it up? I hit the button that said I wanted to back it up from my old phone. The new phone is my husbands and I don't want to back up my phone info on it. I re connected it hoping it would prompt me with the option again and it doesn't , it just shows up as a back up to my phone. How can I get it to give me that option in the beginning again
First of all, I think the first time you sync an iPod that's formatted for Windows on a Mac, the sync process reformats it for Mac. You can check what it is now by looking for the iPod with Disk Utility. If it's Mac OS Extended, it's formatted for Mac already.
Also, there is no current iPod updater app these days. iTunes handles it through the Restore button. If you are not able to use the latest iTunes because of your Mac, I can understand. The latest version of iTunes should run with 10.3.9 or later, if the hardware can handle it.
You said the battery was low so let it recharge for a while.
You should also reset the iPod. It's part of the 5Rs, which you should go through as the starting point for iPod trouble-shooting.
http://www.apple.com/support/ipod/five_rs/wheel/ -
Husband and I used to share an iTunes account when we exceeded our device limit I started a new account he has 2 movies I purchased I want them he does not - can he transfer - give them to me somehow?
Items purchazed under one account cannot be transferred to another
-
essentially i click on a movie and it seems to go onto the play screen ok, however the screen it black. when I click along the movie I can see specific frames that the cursor hands on but the movie will not play.
Is there a way I can fix this myself?I have had the same problem since the latest Adobe Flash update. I have the same problem in IE too. I also have the problem with some YouTube videos at times and a certain video at another website. These are ones I can remember and it didn't start until I updated Adobe Flash. Google Chrome uses it's own flash, so when I use that browser, no problem. So it must be Adobe Flash update being flawed. Maybe it can be rolled back to an earlier version? For doing that, try this link. I haven't fully check it out yet, just found it at the same time I came across this thread.
[http://forums.adobe.com/thread/1022066 How to roll back Adobe Flash to earlier version.] -
HT4613 Why don't all the movies have CC?
I am frustrated that while Apple has great products, not all content is captioned or subtitled... Any idea when that will happen??
Welcome to the Apple Community.
It's not Apple's decision, they get the movies the way the studios prepare them. -
I am trying to create a PDF of a Mac Word document. In the conversion process text seems to shift - what was on the bottom of the first page in the word document shows up on page 2 of the pdf. Any thoughts?
Hi svht,
Would you send your document to [email protected] as an email attachment?
I will check it from my end.Please add the link to this forum post for reference.
Regards,
Florence -
Please help me. I know I can place them on the desk top, and return each file one-by-one, but is time consuming. My time machine was backedup back in september, and I don't want to lose pics I took and saved since then. Please let me know if thre is a "restore" or "put back" feature on the Mac OS X 10.5.8.
Kind Regards,
SteveI don't think "Put Back" is available in 10.5. Might try Cmd-delete (but if Put Back is not available, I guess the shortcut won't be either.) If the shortcut works, you must restore them one by one.
If they are not from your user, you do not want to move them first to the Desktop and then move them to their original locations. Doing so will complete screw up their Permissions. If these are not from your home folder and If Put Back is not available, you must use what will be the very tedious sudo mv command in Terminal for each. But sounds like they are from your user, since they are pictures. -
I have a mac OS X, version 10.9.3 with Pages 5.2 (1860). When I create several shapes or text boxes on the page and try to click on just one, a blue box surrounds every item on the page so I can't edit the one specific item. Why?
Hello betsywetsy
It sounds to me like you have the shapes grouped together. Select them and either look in the Arrange pane of the Format inspector and towards the bottom you should see a Group and Ungroup button. Also you go to the drop down menu Arrange > Ungroup to do the same effect.
Layer, group, and lock objects
http://help.apple.com/pages/mac/5.2/#/tan5eab46568
Regards,
-Norm G.
Maybe you are looking for
-
Firfox refuses to open new tabs. Pushing ctrl-t or the + next to the tabs doesn't do anything, neither in the menu. Opening a link in another tab by right clicking is no problem.
-
Example application to connect to BI system
Hi, Can any one tell me how to connect to BI system In web dynpro java And create chart and table. Regards, H.V.Swathi
-
Urgent!!! - Serial numbers in ORDERS (ORDERS05) idocs
Hi, I have to extend the idoc ORDER05 with one additional segment in order to use it for serial numbers in the inbound IDOCs comming from a non-SAP system. Can anyone give me an idea how to process these serial numbers in the sales order?
-
ZenDM7Sp1 Inventory Rollup NFG.
Hello: I have a Zen7 SP1 DM Deployment with dedicated Zen Servers. 1 Root Server with Database and workstations Connected at one site. 2 leaf servers w/o dB and workstations connected at WAN sites WAN sites are 1) 100Mb FDX and 2) a Full T1 to the ot
-
PyPanel: Clicking task doesn't restore focus
When I click a task in the PyPanel bar, it doesn't have focus restored to it. It gets brought to the front of all my windows, but without focus. My .pypanelrc has def taskButtonEvent(pp, button, task): """ Button event handler for the panel's tasks "