My PIXMA MX472 skip printing texts

My PIXMA MX472 skip printing words in the TEXT portion of "Directions" obtained from the MAP feature of the MSN page. I am using Internet Explorer 10. Any suggestions please?.

Hi, carmonsr!
So that the Community can help you better, we will need some more information. Are you only having problems printing these maps, whereas all other documents print okay? Have you also tried printing your map from another web browser? That information and any other details you'd like to give will help the Community better understand your issue!
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

Similar Messages

My pixma printer skips lines/text only in black

My pixma printer skips lines/text. Color prints fine. Anything printed with PGBK (5) does not. I have cleaned the printer head by removing the carriage that holds the cartridges and using a Q-tip. That did not work. It seems that many people have this problem, but nobody can solve it. Note, the problem is in the printer, not the computer, as the test sheet does not print the PGBK correctly (skips some of it). I almost suspect that the printer prints fine when the cartridge is going in one direction, but when it comes back, it doesn't print at all as the pattern is very regular. Like this:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Has anyone solved this?

Hi, ChesterJ!
So that the Community can help you better, we will need to know exactly which printer model you're using. That, and any other details you'd like to give will help the Community better understand your issue!
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

Error code 5100 PIXMA MX472 printer

HELP!!! ASAP!!!
PIXMA MX 472 printer error code 5100.
What do I do?

Hi hump1276,
To try and resolve the error, please follow these steps:
1. With a flashlight or other bright light, please check the paper feed area of the printer and verify that there are no paper jams or obstructions in the printer that may be causing the error.
2. Look inside of the printer where the inks are located and ensure that there are no obstructions in there that may be causing the print head not to move freely.
3. Remove and reseat all of the ink cartridges in the printer.
Once the above steps have been performed, if you still experience the error, please try cleaning the encoder film of the printer by following the steps located at the link below:
PIXMA MX472 Cleaning the Encoder Film
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Setting to enable Pixma MP560 to print colour text?

     Hi!
     Hope I am in the appropriate section for this problem. I am unable to get my Pixma MP560 to print colour text. Ink levels fine. Is there a setting for this when I click print?
     Regards,
     DG.

It has to be something in Page Setup.
Or when the print dialog box comes up there must be a Printer properties dialog button. Open that and make sure it is set to print in color.
In the System Preferences Printer & Scan is there any settings for the printer.
As usual working with a Windows PC seem much easier.
EDIT:
When you go to Print in the print dialog window is there a Presets section? If there is for your printer click on that and at the bottom there should be "Show Presets..
Open that and select a color preset or some that doesn't say B&W.
Message was edited by: Shootist007

MP600 Stopped Printing Text

Installed a new PGI-5BK in the MP600 about 5 months ago and only printed about 30 pages.
Printed 4 pages, perfectly, a few days ago, but when I tried to print today, only the image on the page printed, ... no text at all.
Tried printing a text-only page and it came out blank.
Printed a Nozzle Print Check page and the first row was totally missing.
Removed the PGI-5BK, and pointing the ink port down, squeezed the sides, but no ink appeared in the port. (Is this normal for a presumably mostly full cartridge?)
Thoughts?

Hi geovic,
We recommend performing at least one cleaning and two deep cleanings on the printer with the PGI-5BK ink tank installed to try and get the ink to print. To do this, please follow the steps located at the link below:
PIXMA MP600 Performing Print Head Cleanings
Hope this helps!
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to print text vertically in smart forms

hi,
Can any one tell how to print text vertically in smartforms
ADVANCE THANKS
GUHAPRIYAN

HI,
Chk out this thread.Maybe it proves helpful.
Re: vertical writing in smartforms
Regards,
Gayathri

Print Text File in NW 3.12?

I have to admit some ignorance regarding NetWare printing, so my
apologies in advance...
I work for a document management company, and am trying to find a
solution for a customer running a fairly archaic, DOS 6.22-based
application that utilizes a NetWare 3.12 server for file and print
services. My need is to retrieve print output from their application,
in the form of a text file, and then reprocess it for automated faxing
through a fax server device.
My problem is this: their application seems to print directly to a
printer by defining what it calls a "network port" (which seems to map
to a spooler, 0 through 5) or LPT1, and by referencing a printer
definition. As far as I can tell, the files that are deposited in the
print queue are byte streams, i.e., they're not human-readable (they
have extra characters that I'm assuming are control characters). They
therefore aren't usable by my print distribution software.
I've tried using CAPTURE to send to a text file, but the application
seems to conflict with the command. If I set CAPTURE, then start the
application and send a job to LPT1, the application returns an error
that the printer is unavailable. Upon exiting the application the port
is no longer being captured (although I've tried all of the options I
can think of to keep it so). Oddly enough, the application does
successfully print a text file to LPT2 (for a barcode printer), which
is CAPTUREd via a command in the system autoexec.bat. This is done a
different part of the application.
If anyone can help me figure out a way to generate a text file in this
environment, or to work with the print file that's currently being sent
to the queue (e.g, can it be translated somehow to a simple text file?),
that would be much, much appreciated. This customer is in a tight spot,
with an unsupported application that they can't presently afford to
upgrade. My solution would save them enough money over time to replace
the system.
Again, thanks in advance for any help!
wynand32

If the Dos app has no print drivers included, then indeed it is relying
on NW and PRINTDEF/PRINTCON to do the formatting stuff. That must have
already been set up for it to be successfully printing now, it's just a
matter of adding a definition that doesn't do anything to the print text.
>In fact, given my ignorance of the NetWare environment, I'm not sure
how the term "driver" even applies, unless it would refer to the
printer definition.
I was referring to a driver within the Dos app, nothing to do with
NetWare. For instance Word Perfect for Dos came with Dos drivers for all
sorts of printers, one of which was a generic text driver.
>I wonder: is there a setting in PRINTDEF that could be changed for one
of the printer configs that would influence the output? Or, would
PRINTCON apply in this environment?
Not supplied, AFAICS, but either one of the simpler print drivers
supplied such as Diablo will do, or you'd need to set one up. Hopefully
http://www.novell.com/documentation/...a/fm19724.html
will help you enough as it's been too long since I did it to remember
the details.
Andrew C Taubman
Novell Support Forums Volunteer SysOp
http://support.novell.com/forums
(Sorry, support is not provided via e-mail)
Opinions expressed above are not
necessarily those of Novell Inc.

How to print text/data in flex 3 using printer???Plz help...

   Hi,
          plz tell me the way to print text/data using printer in flex. I tried the FlexPrintJob class. but it takes object of a container to be printed & prints the visible content of that container(along with scrollbars), bt i want to print all contents of the container(including invisible).
      I have tried to print bitmap image through FlexPrintJob but it takes lot of time for spooling... So plz help me out in printing(fast with all content) in flash
I am using flex 3 (flex Builder 3 IDE).
Thanks in advance!!!

Hi Sagar,
Don't worry You can use the below work around to print all the contents of the Container including the invisible contents under scrolll with out scroll bar..
So what the idea here is we are seeting the container height to full size with out scrolls before sending the container object to printer and as soon as you print the object you are restoring it to the original height with scrolls...so that you can print the full contents without scrolls...
You may have doubt that by chnaging and restoring the size the user may see momentary resize of the container but it is not so as it is a fraction of a second and user cannot notice this change... Give it a try ..I had already run into this problem recently and I have found a work around for this which is as below:
// Here mainContainer is the container or box id the contents of which you want to print
   private function doPrintContainer():void
    var printJob:FlexPrintJob = new FlexPrintJob();
    if(printJob.start() != true) return;
    try
     var mainContainerHeight:int = mainContainer.height;
     //Increasing the height of the desired component to be printed.
     mainContainer.height = mainContainer.measuredMinHeight;
     mainContainer.verticalScrollPolicy = "off";
     //Adding the resized Component to our FlexPrintjob and then sending the print request
     printJob.addObject(this,FlexPrintJobScaleType.MATCH_WIDTH);
     printJob.send();
     //Resizing the component back to normal size
     mainContainer.height = mainContainerHeight;
     mainContainer.verticalScrollPolicy = "auto";
    catch(error:Error)
                 trace("Error : " + error.message);
If this post answers your question or helps, please kindly mark it as such.
Thanks,
Bhasker Chari

How can i print text messages from my htc amaze to my deskjet 3050A

how can i print text messages from my htc amaze to my hp deskjet 3050A

Hi,
I believe the phone uses Android OS, v2.3.4 (Gingerbread) therefore you can use one of these applications:
http://www.printeron.com/apps/androidprinting.html
https://market.android.com/details?id=com.pauloslf.cloudprint&hl=en
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Not printing text-only graphics on Canon. Not printer problem-print ok on Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Not printing text only on Canon--grahics print ok. Not printer problem. Prints ok on a Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Without your printer model numbers, readers can only give you vague general directions.
System Preferences > Print&Fax > ...
... shows a list of all set-up printers.
If you are having serious problems, it makes sense to "Reset the Printing System" (which also removes all printer set-ups) and add back each printer. It only takes a few minutes.
Mac OS X 10.6 Help: Resetting the printing system

How to print text on container using oop on alv list

Hello Guru's,
         pl guide me how to print text on container using alv list-display which have interactive events using     oop classes/methods ...
                I want to print hard coded text on coantainer , on double clicking it will call another screen.
Pl Help..
Message was edited by:
        paresh sonavane

Hi Paresh,
       1.      Go to the Layout and Create One custom container box and give name it.
        2. Custom Container is the one type of tool and its used for Displaying the Reports
            with the use of ABAP Objects.
        3. Go to se38 and Write The Following Code.
tables ZTEAM_GD.
DATA : OBJ TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
       OBJ1 TYPE REF TO CL_GUI_ALV_GRID.
DATA IT_TEAM LIKE TABLE OF ZPLAYER_BAT_DET       .
SELECT * FROM ZPLAYER_BAT_DET INTO TABLE IT_TEAM.
CREATE OBJECT OBJ
EXPORTING
    CONTAINER_NAME              = 'ALV'.          -
> Give ur Container Name
CREATE OBJECT OBJ1
EXPORTING
    I_PARENT          = OBJ.
CALL METHOD OBJ1->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
    I_STRUCTURE_NAME              = 'ZPLAYER_BAT_DET'
CHANGING
    IT_OUTTAB                     = IT_TEAM.
*CALL METHOD OBJ1->SET_DROP_DOWN_TABLE
EXPORTING
   I_STRUCTURE_NAME = 'ZTEAM_GD'
CHANGING
   IT_OUTTAB        = IT_TEAM.
CALL SCREEN 9000.
*&      Module USER_COMMAND_9000 INPUT
      text
MODULE USER_COMMAND_9000 INPUT.
CASE SY-UCOMM.
WHEN 'EXT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_9000 INPU
Thanks.
Reward If Helpful.

Print text file with labview 2011 and windows 7

I am having some strange problem, hope someone out there knows the solution.
We have a labview program running under windows xp, the program runs some test and print label from a local label printer. Last week, I have to upgrade the computer to windows 7 and all the sudden the printer will not print any more.
The print vi is very simple. I am using the report function and I am attaching the diagram of that vi below.
If I use windows notepad to open that small text file, I can print fine. This means the printer driver itself is OK. However, if I print the same text file through Labview printing vi, from the printer's task list, I can see it does not recognize the char. From the attached png file, the top one is the task from notepad, it shows 2 pages and the bottom one is from the labview, it becomes 33 pages.
For the printer part, I use Generic / Text Only printer driver which comes from windows itself. And I am aslo attaching a sample of the text file, there are quite a lot of special char, it is for print bar code. When I tried to use labview print text vi to print general text from my computer to a regular printer, the vi works. So it seems Labview print can not handle the special char? Although it worked many years under windows XP in the past.
Welcome to any suggestions!
Thanks
Attachments:
print vi.gif ‏9 KB
labview print bug.png ‏26 KB
SerialLabel.txt ‏1 KB

DGU wrote:
where to check RAW or TEXT? the print report vi only asks for file name and printer name.
When I print from notepad, everything just goes by default. This is a label printer, so I never need to specify printing parameter such as size, orientation, etc in the past
Famous last words go something like this: "...never had to do that before." Maybe you have to do that now. It's worth at least comparing the defaults settings for bothe generic drivers. It could save you a lot of headache if you notice something different.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Can't print text documents

For a little over a week I have been unable to print text documents from either of my printers (Lexmark Z-23 and HP PSC 1410). I had noticed that the sharpness of text had been declining-but I was in denial, sort of. Now, when printing text documents from the computer, the printout is garbled, streaked, and unreadable. Sometimes the first half of printed document will be okay but the second half will be all garbled and streaked.
I have tried to print from Pages, Appleworks, and TextEdit. No success in any of them. I have converted a page of my word processing document to pdf format, but it does not print out properly in pdf, either.
Here's the weird part: the HP will produce good copies (copy function) I am able to print out beautiful iCal (calendar) pages; some web-based information (like maps with directions) comes out great; and even "screen-shots" (or pictures) of text documents are fine; I just can't print text-based documents.
So far, I have cleaned and calibrated the printers; they have enough ink. I have uninstalled then reinstalled the software and drivers.
Help?
~~PM
iMac G5 2GHz PPC Mac OS X (10.4.8) still miss my Indigo G3

my guess is, it's not your printers that are the
problem but maybe a font problem.
Have you done anything with fonts lately?
Why, yes.
Just today, in FontBook I validated fonts and
resolved duplicates, whatever that means. I also
"turned off" a bunch of fonts that I never use. Then
I restarted, reset PRAM, and repaired permissions in
Disk Utility.
I still have the problem.
What other kinds of things can you do with fonts?
~PM, wife of GM
Glenn-- Here is a great article written by a fellow apple forum frequenter:
http://www.jklstudios.com/misc/osxfonts.html
Maybe you can read it or weed thru it and make sure you haven't turned off any necessary fonts that you don't use but the system finds necessary. Especially "TextEdit" uses I think exclusively system fonts and if you've turned them off... It's just good to know which fonts are for what before you disable certain ones.
I believe fonts can definitely cause these sorts of problems, especially if you've disabled system fonts.

How to print text on back and back of page in smartforms

How to print text on back and back of page in smartforms.

Prince,
in page's output option you can set D for double-sided.
Default: No change of print mode
S     Begin new page in SIMPLEX mode (single-sided)
D     Begin new page in DUPLEX mode (double-sided)
T     Begin new page in TUMBLE DUPLEX mode (double-sided)
Amit.

How to Print Text in WAD 7.0

hi
i have created a web template using WEB APPLICATION DESIGNER
now i have added few custom texts in it like
Report name,Cost centers ,Plant Names
now if i use Export to command to create print , it is not printing this custom texts
it is only printing Query Result.
If i use File -> Print
this print texts but cannot print WHOLE QUERY DATA
it only prints what is visible (e.g. if the report is wide with 20 Columns, it cannot print 20 columns.)
how to resolve this ??

Hi kartikey,
just select a text item and enter the text at the last parameter TEXT_CONTENT, that´s it. You may change the style and so on. It is also possible to bind the data provider and display the query title or other generic text.
Look up the SAP help here:
http://help.sap.com/saphelp_nw70/helpdata/en/8c/d9413a3ace7022e10000000a11402f/frameset.htm
regards
ARNE

My PIXMA MX472 skip printing texts

Similar Messages

Maybe you are looking for