My pixma mx922 is printing orange throughout the page. why?

every time we print something in color, it has an orange hue throughout.
Solved!
Go to Solution.

Hi sbsproperty,
You can print a nozzle check pattern from the printer to see if all of the inkjet nozzles are dispensing the ink correctly.  To do this, please follow the steps located here.  Once the pattern is printed, please examine it and compare it to the correctly printed nozzle check pattern here.  If the nozzle check pattern did not print correctly, performing at least one cleaning and two deep cleanings may resolve the issue.  To do this, please follow the steps located here. 
Should you still experience the issue after performing the cleanings, the printer may require servicing.  Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • My report is printing half of the page when I print the report Hp psc 1315

    My report is printing half of the page when I print the report in this printer
    Hp psc 1315 all in-one and when the operating system is windows xp , but when
    I run the same report in windows me , and the same printer it is running well
    And my report version is :
    Report Builder 6.0.8.23.0
    ORACLE Server Release 8.0.6.0.0
    Oracle Procedure Builder 6.0.8.20.0
    waiting for your valuable answer .
    Best regards
    Jamil alshaibani

    i would like to now if there is any additional software required for the windows xp and oracle report to solve this problem
    please help
    betst regards
    jamil alshaibani

  • Why aren't my pages printing to fit the page? HP Officejet 4622

    When printing from cell phone with hp eprint app, or ipad2 with hp eprint app and/or airprint, the pages printed are much smaller then 8" x 11".  I have checked all the settings (actual printer and phone/ipad app settings) and everything says it is set to print on 8" x 11" which is the same size paper i have in the printer. However the pages are only being printed out at about 6" x 8". The text is very small and the whole page is about 3/4 as small as it should be. I have already changed the settings to print on legal size paper and still no difference
    EDIT: i would also like to add that these are attachments im opening up through email into adobe pdf format. i have been playing around with the settings within adobe on my desktop and its still printing much smaller. i select the "Fit to printable area", and played around with the "Choose paper source by PDF page size" and still no difference

    I will need a little more information. What type of document are you printing? ePrint prints actual size. Is it an image of a document that you are printing?  Have you tried resizing the document? 
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • TS1135 Low quality warning on a photo in a photobook. I understand the warning but I still want to go ahead with my design, will it get printed or will the page be deleted?

    Low quality warning on a photo in a photobook. I understand the warning but I still want to go ahead with my design, will it get printed or will the page be deleted?

    Sorry 1 further question please..
    the  pixel width is 1,076 and heigth is 793 and I want to have this photo as a background in a 13 x 10 inch book
    Will this be ok?
    Thanks

  • Hi, My printing has suddenly changed in adobe to a large scale, as in, what should be one page of print comes out as 24 pages?   I havent changed anything, its happening on more than one document also, I have to stop my printer before all the pages spew o

    Hi, My printing has suddenly changed in adobe to a large scale, as in, what should be one page of print comes out as 24 pages?   I havent changed anything, its happening on more than one document also, I have to stop my printer before all the pages spew out. I have tried printing 'one single page' and it does exactly the same? Help?

    Is the Poster Print feature turned ON?

  • Page -1 of 1 printed on all the pages when report is exported as txt

    We developed all the reports in Crystal Report XI.
    When we export the reports in pdf or word doc the page no at page footer is printed correctly, but wen we export the report in as txt file the "Page -1 of 1" printed on all the pages, is there any issue on Crystal Report regarding this.
    Please provide me the solution for this.

    Hi,
    This is a known issue with crystal report which has been identified earlier, can you verify by printing page number in your report or export the report to a word document and verify whether it prints properly.
    Regards,
    Vinay.

  • My hp 100 mobile printer will only print one page then quits. will not print all of the pages.

    my hp 100 mobile printer will only print one page then quits. will not print all of the pages.  i have rebooted, new install, and reset. still the same thing. when i look it shows that it is printing but there is nothing happing. i use this with my lap top.

    Hello colt1,
    Are you using Bluetooth or USB cable to connect to the printer?  Did you install from the disc, or from the online program?  When it sits there and doesn't print, does it eventually give error messages, lights flashing, etc.? 
    Thanks,
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • PIXMA MX922-Envelope Printing

    I am trying to print a commercial size 10 envelope from Word 2013 document. The envelope contains a table created in Word that extends the full height and width of the envelope with .5 margins on all sides. This printed fine on my HP LaserJet 5 but when I try to print it on the Pixma, the right margin switches from .5 to 1.48" when I go to print and as a result truncates the table. I saw in the fine print that the Pixma 922 does not support borderless envelope printing so I'm thinking maybe there is a built in larger border for envelopes. Has anyone figured out a work around? I attempted to avoid using the "envelope" settings by creating a custom document both in Word and for the printer that is the same size as the envelope. But the same thing happens - the table is truncated. I also attempted to just type text, thinking maybe there was something finicky about the table. But even the text is truncated and the margin overrides whatever I put in to change to 1.48" Very frustrating!

    Click Start
    Type: 'Print Management'
    In the left pane navigate to: Print Servers | PC Name (local) | Drivers
    Delete the faulty print driver, or if you're not sure, delete all of the Print Drivers listed. 
    Restart and download another or updated driver for your printer from the Canon's web site.
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 9, Lightroom 6

  • PIXMA MX922 stopped printing

    Have been using it for a couple of weeks.  Today printer is on, it is the default printer in Windows 7.  Sent documents to print; they appear in the printing queue, then it gives "error printing" message.  Went to Canon utility, sent test page, same result.  No error codes showing in printer display.  Printer status is "Ready" when I check it in Devices and Printer.  Turned everything on and off, same results.  
    In summary, printer is connected, no error messages, but no print output.  
    Please help!
    Solved!
    Go to Solution.

    Click Start
    Type: 'Print Management'
    In the left pane navigate to: Print Servers | PC Name (local) | Drivers
    Delete the faulty print driver, or if you're not sure, delete all of the Print Drivers listed. 
    Restart and download another or updated driver for your printer from the Canon's web site.
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 9, Lightroom 6

  • Photosmart C6180 All-In-One...Black Ink will not print...the page is almost blank

    The Printer seems to work correctly, but the page is almost blank.  The only exceptions are a few faint characters, and sometimes a light line down the side of the page.  Can you please help?  The printer has not had much mileage.
    Thanks,
    Ross

    I ran all those tests and did all the upplugging, turning off, etc.  Do not think is a software / connection problem.  Somehow I think the issue is in the black print head.  All ink levels are very good.  In the past, I have been running the printer with the print settings in the software at ... print  in Greyscale / Black Only.  Though the old black cartridge showed plenty of ink, I put in a new black cartridge and that is not the problem.
    Even when I put a paper on the glass to copy and use the black copy button, it prints very faintly...almost not even there.  Yet when I copy by pushing the Color Copy button on the printer and use a color original, colors seem to show up better.
    I have used the tool, clean print heads, several times.  There is a lot of ink in the squares, but it is all color.  My gut is somehow the black print head is still plugged, or something like that.  Though it says to use the "clean print heads" sparingly because it uses up ink,  I saw in the self help to do this 3 times or more.
    What can I do to get the black print head to print?  I appreciate your comments.  My wife is ready to toss it and move on.
    Hope you have a good weekend.
    Thanks,
    Ross

  • My HP 309c is only printing on half the page.

    When I print from a web page, my HP309C only prints on the lower half of the paper.  This causes a 2 page document to print on 4 sheets.  Printing from Word works normally.  I have reloaded the driver (full install of software) direct from HP with no affect.  Running Windows 7 home and all patches.  IE 8 and 9 both affected.

    Please read this post then provide some details. What printer model? What operating system? What program are you printing from?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • When printing from firefox, the page address prints in an illegible font. Same font also appears in certain field windows in the browser.

    Why would the fonts in the page address print in an illegible font? It's a black background bar with a white jumbled cartoon-style font. The same font is present in certain field windows when filling out forms. I checked the fonts in preferences and it all seems to be correct and normal. Could this be a Mac issue?

    There is a known bug involving printing in beta 12 that has been fixed in the Firefox 4 release candidate which is due out soon.

  • Printer printing single page as multiple pages and on sometimes only print part of the page

    The problem may not be with the printer it could be with the computer instead and I would think that maybe that is the problem.  The computer is an HP 255 as well, and both units belong to my school so I don't have administrative functions. The computer runs Mircosoft windows 7-professional version 32 bit.  I used to be able to print normally with no problems.  However, recently I tried to print my paystub and it blew it up so wide and long that it only printed a third of the page down and half the page across.  Today I tried to print out some other paperwork and for a single page it was printing as three pages but some pages it printed in their entirety with no problems.  I've tried to run the diagnostic check and it downloads but refuses to let me open it no matter what program I try to use.  I've tried to check the printing perameters but it tells me that it's set at 10 by 11 with no margins and is set to portrait.  If I try it on my Asus desktop, it seems to print things just fine so I'm inclined to believe it is the computer but I have no idea what's wrong or how to fix it.  Thanks.

    BMack,
    Have you thought about having a 2-page document where the second page is a duplicate of the first page?
    Jerry

  • Why does my 11x17 spread start printing 6" into the page? HELP!

    I am trying to print a book dummy using InDesign. I have set my paper to 11x17. The printer seems like it's about to print and then pulls the page in 6 inches and begins printing 6 inches into the image. I've tried printing something on 11x17 paper in Photoshop and it doesn't do this. In print settings I have paper size Defined by Driver. Can anyone PLEAE help me?

    It pays to play.
    I always play with any equipment I have to work with so if these things come up I can fix them or prevent them come a deadline.I always look online at fourms like this for things I need to figure out to keep up-to-date on what to expect and were to go if I need any help for things I can't figure out.
    If the boss or client wonders why I'm not working on his/her project I show them the kind of output/screen representation/error message I get when I try to do something with their setups. All you need in order to get a solid understanding of such is go to a conference or convention and have to help someone give a demo and you are the one setting up the slide show or demo. If you are not totally prepared the worst will happen, inevitably.
    In your case you are correct in trying other avenues but you now have a deadline and your only solution is to use the notebook or take the file to a service bureau for output.

  • When printing a web page the type is spaced out all over the page, why?

    when I try and print a web page out on firefox it spreads the words out all over the page so it is unreadable. I never had this problem until recently.

    This is a regression that was introduced in Firefox 4.0 beta 12. It is fixed in 4.0 release candidate 1, which is now available. Go here: http://www.mozilla.com/en-US/firefox/4.0rc1/releasenotes/ and click on the green button "Firefox 4 rc free download". Note that you should do a custom install and change the install directory to the directory where your beta version is located. Alternatively, you should receive a notification that an update is available from within the beta version. Follow the instructions to download and install the update, and once you are running the release candidate, your printing problem should be fixed.

Maybe you are looking for