My Pixma Pro 9000 won't print on an A1 envelope 3 3/8 x 5 1/8

Has anyone had trouble printing on a smaller size sheet. Mine will not print on an A1 envelope 3 3/8 x 5 1/8. I plan on calling customer service to see if I can get anywhere, but figured I would try here too. I am running Mac OS X Version 10.8.5 and using Illustrator 6.
Thanks a million,
Margaret

Is this kernel panic occurring after your boot into Safe Mode?
I'm not sure what you mean by "mountain lion attempt" - did you, in fact, upgrade to Mountain Lion and let the installation complete?
Clinton

Similar Messages

Canon Pixma Pro 100 won't print

Hopefully someone can help. I just purchased a new Pixma Pro 100 and diligently set it up using a USB connection to my laptop (Windows 8, 64 bit). The printer printed the alignment page fine, but won't print anything else (including a Test Page from the device Properties box). I immediately get an on scree error message when trying to print.
Any thoughts out there?

Unplug the printer for 15 minutes. Unplug it from everything. Don't use My Image Garden. Use Easy Photo Print EX (came with your printer) or some other program.
EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

Printing Issuse From Lightroom 4 To Canon Pixma Pro 9000 MK II

I have been trying to print from Lightroom 4 to a Canon Pixma Pro 9000 MK II. Whenever I try to print via the front try (for canvas) I get an error message (code 1281) and I cannot print. I have tried a few different papers as well as canvas and all of them give the same error code.
I have also tried printing from Elements 9 with the same problem.
I can print via the front try using Canon's own software, Easy Print Pro, but I cannot soft proof the image first and I cannot the the correct size of image either.
Does anyone have any idea how I can get round this problem?
I have spoken to Canon and they have passed the buck saying that as I can print using thier software it is an Adobe issue.
Printer: Canon Pixma Pro 9000 MKII
Software: Adobe Lightroom 4
Operating System: Lion OSX

The final answer was as per Rikk Flohr's instructions,
Lightroom>Print Module
Print Settings button Bottom Left-hand Panel
Set the Center Pull-down to Quality and Media
Paper Source: Front Tray
I was having difficulty finding these previously, thanks Rikk.

Compatibility with Canon Easy PhotoPrint Pro - Pixma Pro 9000

Hi,
I have just downloaded and installed the trial version of Photoshop CS5, only to discover that in the Automate (Under Files) option, Canon's Easy PhotoPrint Pro is no longer listed.
I would be interested to know whether this is a Canon, or an Adobe problem
I found that with Photoshop CS3, this method of printing, provided most accurate colours
I would be interested in other subscribers, who print with the Canon Pixma Pro 9000, how they get best results from their printer - What options do you select in the print dialogue box, etc.
Brian

This sounds like a question about general Photoshop CS5 use. This forum is specifically for people using the Photoshop CS5 FXG feature with Flash Catalyst.
I recommend you post this question to one of the more general Photoshop forums:
http://forums.adobe.com/community/photoshop
Your question will get much wider exposure there, and you are more likely to get an answer from the Photoshop community.

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

Hi,
Can you confirm that you have an Officejet 8500a or Officejet 8500? On the 8500a model, you can set the networks proxy address and port setting from the front panel of the printer (setup>Webservices setup>proxy). If you are unsure what your proxy settings are you'll need to contact your network admin. If your network uses a proxy users name and password for all devices, you need to enter this information along with the proxy address and port in the printers embedded web server. Type the products IP address into an internet brownser window (printer must be connected to the same network as PC). Select the network tab, and than look for the proxy settings option. Enter in the information and click apply. Once the networks proxy information has been correctly inputed into the embedded web server, try printing again. If unsuccessfully, you might try reinstalling the printer software after uninstalling it. Hope this helps!
I was an HP employee
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

Managing Color with LR and the Canon Pixma Pro 9000 10.1.2.0 printer driver

I would like help understanding how to manage color in LIghtroom with the Canon Pro 9000 10.1.2.0 printer driver. When I ask LR to manage color in the Printing Module Color Management Profile, it warns me to turn off the printer managing color. But I cannot find where to do this in the driver.
The Color Options menu in the driver gives an additional choice for "Color Mode", but there are no choices here except "Standard", "Linear" or "Tone". The only Canon documentation I can find shows a choice to turn off printer management here, but this driver doesn't give me that choice.
If I look in the driver's "Color Matching", I see only two choices: ColorSync or Vendor Matching. ColorSync brings up Canon profiles like "Pro9000 Fine Art Photo Rag", but selecting one of these gives a warning of unexpected results. This pushes me back to Vendor Matching. But is this turning off the printer driver and leaving it to Lightroom?
Right now, I am getting the best results from choosing "Managed by Printer" in LR's Color Management Profile, and setting "Color Matching" in the Canon driver to "Vendor Matching". If I instead choose one of the Canon profiles in LR's Color Management Profile (and it tells me to turn off the printer managing, which I cannot do), then my prints have a slightly bluer color cast.
Is there a way to turn off the printer managing color in this driver and turn this over to LR, or am I getting the best results possible with the printer managing color anyway?
I am using a 2.4 GHz Intel iMac with OS 10.5.4, 2 gigs SDRAM, standard ATI Radeon HD 2600 Pro video card. I downloaded the Canon printer driver from their website, so I assume this is the latest. there is another driver available at their website, but for a lower bit depth. Should I abandon the 10.1.2.0 for this other one? I work with Nikon D300 NEFs, and I assumed the higher bit depth printer driver will work better with these images.
Any help will be greatly appreciated!

Dear DYP: Unfortunately, those choices are not available in the 10.1.2.0 Canon Printer driver. There are only 2 radio buttons, ColorSync and Vendor Matching. ColorSync then provides a drop-down menu, with no choice for turning off the printer driver.
But I think I found the answer. I found a deeply buried FAQ on the Canon site (no direct URL; sorry!) Here it says:
"Issue: How do I disable the printer driver color correction when using the CUPS driver in Mac OS X 10.5.x?
Solution: Change color management options for printing (Mac OS X 10.5.x)
Change color management options for printing
Open the document you wish to print.
Click 'File' and then click 'Print.'
Note: If the Print window contains only two pop-up menus, click the triangle beside the Printer pop-up menu for expanded options.
Select 'Color Matching' from the Print Options pop-up menu.
Select 'ColorSync' if you want the application you are using, and not the printer driver, to control the color management of the printed output.
Note: If you are using Adobe Photoshop CS2 or CS3 and have selected 'Let Photoshop Determine Colors', the 'Color Matching' from the Print Options pop-up menu is automatically set to 'ColorSync.'
Select 'Vendor Matching' if you want the printer driver to control the color management of the printed output."
I tried it, and chose "Automatic" as a choice in ColorSync. The choices under "Color Options" are then greyed out, implying that the Canon driver is now turned off.
The prints came out great, with no color cast, and a little brighter than the printer managed prints.
So, Vendor Managed means printer manages, ColorSync means LR manages.
Thanks, everyone, for keeping me going on tracking this down!

Pixma Pro 9000 printer: correct settings to use Epson Ultra Premium Presentation Paper Matte?

Epson Ultra Premium Presentation Paper Matte formerly known as Enhanced Matte paper; Epson instructions advise setting for "Enhanced matte paper, "Matte paper Heavyweight" or :Archival Matte paper". What setting should I use for my Pro 9000?
Thanks!

Welcome Texcollins!
Not a great answer, I know, but I think you might have to try some trial-and-error with the different matte options. Its hard to say for all the different paper out there which one will be the best.
I don't have the options for the Pixma Pro9000 in front of me right now, but a few weeks ago I had to try some matte 3M photo paper and there wasn't an exact setting for it, so I tried the ones that sounded the closest and and to judge by eye (and touch) which one was most accurate and dried correctly. Your Epson paper could be similar or completely different; its a toss-up.

I purchased a Pixma Pro-100. My prints do not reflect the edited images from CS6/LR5.

I just got a Canon Pixma Pro-100 printer. I'm running CS6 and LR5. My monitors are calibrated, my color space is Adobe RGB (1998). I want the Photoshop /LR to manage my color. I (believe) am using the correct profile for the Canon paper (Pro Luster). However, my prints do not reflect the edited versions I am viewing on my monitors. The colors are darker, dull, a bit on the reddish side, and not as vivid as what I am expecting. Is there anyone out there who can guide me to the proper way to set the up my printer and color space? I this is very confusing to me.

You don't need any additional gadgets to set up your monitor(s) and the printer. Mostly you will just frustrate yourself and waste a lot of ink and paper. Stop wasting your time with them, too.
You do need to get three things set carefully. You need the brightness, the contrast and the grey-scale set right for the printer.
Big point to remember you are dealing with two completely different types of color. One is light and the other is dyes. They will never match exactly except for maybe one or two colors at a time. I generally shoot for flesh tones as that is what people notice mostly.
Always check the details and never let the printer do any color managing. All Canon printers I have worked with have a reddish bias. You can not or at least it is very difficult to get rid of it. Canon engineers seem to prefer a warm tone in their printers.
I curently use three of the Canon Pro printers form the 9000, 9500 II amd the 100. All are great printers. But right now what you are seeing and what you are sending to the printer is different. These need to match or you need to know what to adjust in PS to make them match. Don't use LR to print, it isn't as good as PS and it will be different. If you must, stick to either/or but not both. I prefer PS.
Always shoot RAW and use ACR to convert in either LR or PS but I always print from PS.
Let me know how you get along.
EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

PIXMA Pro 10 shows 2 printer queues after installation

I have just installed my newly bought PIXMA Pro 10 printer.
I installed USB direct print mode first, and then I also installed the wireless print option. Now I see 2 printer queues with similar names .. "Canon Pro 10 series", and "Canon Pro 10 series 2".
While I am only using the wireless option now, it seems only the 2nd queue is selectable, while the first one has a grey-round symbol preceeding it, it somehow also says off line.
Does the first queue represents the USB linkage and is offline while the 2nd queue represents wireless connection is workable? Or was it an installation error?
casual than casual

"Does the first queue represents the USB linkage and is offline while the 2nd queue represents wireless connection is workable? Or was it an installation error?"
Yes and yes! It won't hurt but you should decide which you want to use and stick with it.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 9, Lightroom 6

HP Officejet Pro 8500 won't print yellow. No error message. Cartridge not out of ink.

Printer won't print yellow. No error messages. Cartidge not out of ink, but did put in a new one and still won't print yellow.

Ok SLU87...here are some steps you can take that should help with your Officejet Pro 8500 A909g not printing yellow:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01980797&tmp_task=solveCategory&cc=us&dlc=en&la...
Let me know if it helps or not.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Officejet Pro 8625 won't print.

Recently purchase Officejet Pro 8625. It won't print from my XP computer, USB interface. I have connected a Vista laptop to it and it prints.
When I send a test page to it, the print dialog box shows the print job status as "spooling", then the job disappears, but it didn't print.
I tried downloading the 8625 basic driver from HP's site. As I walk through the setup, when it asks me to plug in the USB cable, I can't go any further. I don't think that the computer can see the printer. I have another printer, and using the same USB port and cable, I can print without problems.
Thanks for any suggestions!

Hi,
Try following the HP Print and Scan dovtor by selecting Fix Printing and select if that may help resolving the issue:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-135113-1&cc=us&dlc=en&lc=en...
If that does not help resolving the issue, Click on Start > All Programs > HP > HP Officejet Pro 8620 and select Uninstall to remove the software.
Click the Start button and then click on Run.
Type spool into the run dialog and click on OK.
Open the Drivers folder.
Open the w32x86 folder.
Next, open the 3 folder.
Locate the HPBXPSRENDER.DLL file within this folder, right click it and Rename it into HPBXPSRENDER.OLD
Once you are done, download and install the latest software below and check for any difference:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-124140-3&cc=us&dlc=en&lc=en...
Please let me know if that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Canon PIXMA MX712 suddenly won't print or copy anything - no color, no B/W, not even with Deep Clean

Canon PIXMA MX712 worked great, no degradation in print quality (over last 1.5 years). Suddenly won't print or copy anything. Can't print wirelessly (from IPAd or computer) or plugged in with USB directly to laptop. Can't copy. Makes normal print head sounds and "prepares" to print. Sounds like it is working and spits out nothing but blank pages. Tried doing test print and nothing shows up on page. Tried doing a deep clean and still nothing. Tried unplugging and letting it reset and turn back on and still nothing. Tried switching out printer cartridges and still nothing. All lights are on for the print cartridges. The printer says it is ready and never received a print error. Please help me stop getting nothing but blank pages. It would seem normal to start having streaking or blotchy prints, but not just to work great one day and then stop.

I have the exact same problem ... printer is about 18 mths old ... I have done what has been suggested ... any other ideas

Pro 100 Won't Print Borderless

I've tried printing out of image garden, out of InDesign, out of Photoshop, out of Illustator, as a PDF but nothing seems to make my printer want to print borderless.
I've tried A4, 5 x 7, custom paper sizes, images that are exactly the size of the paper but nothing seems to be working.
Am I missing something?

What paper are you using?: From Canon website:
"6.5 or later or Canon ImageBrowser 6.5 or later for "MOV" files, or Canon ImageBrowser EX 1.0 or later for "MOV" or "MP4" files.
Envelopes, High Resolution Paper and certain fine art papers are NOT supported for borderless printing."
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Pixma Pro 100 : Unable to print 13x19" from Apple Macbook Pro

I've got the latest drivers and firmware.
Primarily attempting to print from Apple Aperture; A3 and A3 borderless work fine, but neither use the available space on my 13x19" paper.
Any custom settings for 13x19" result in either A) 3x5 print on 13x19 paper, or B) out of paper alert (1006?).
I also tried printing from adobe photoshop elements 6; there was a "super B" paper size here, but again the prints either printed borderless 13x19" but with poor random cropping, or I got the no paper error, depending on settings. Same results when printing from Apple Preview.
So far the largest print size I've gotten successfully is 11.6x16.6" using A3 borderless.
How can I get a 13x19" print or largest size? Thanks

The fix for mine was to go into system preferences, printers & scanners, then remove all references to the Canon printer. This also removed the apple drivers.
Then, download all drivers from Canon's site to your desktop.
Then in the printers & faxes pane, click plus, and select the printer from there- you may need to select the drivers on your desktop. Somehow this forced install of the canon drivers over the apple drivers, which seem to get priority otherwise.
After doing this, the A3+ paper size appeared in my apps as an option for the Pixma pro 100, and I had the utilities tab appear for this printer in the control panel.
I called Canon tech support to figure this out, they were quite helpful.

My Pixma Pro 9000 won't print on an A1 envelope 3 3/8 x 5 1/8

Similar Messages

Maybe you are looking for