My playbook wont show any wifi after a system update

I did a system update, afterward it didn't connect to any wifi network. I did a reset but still saying connect to wi-fi select a network and no network shows up. any suggestion?

if you want to reset to factory then follow this.
First I would like you to do a Back Up of your PlayBook using your computer and BlackBerry Desktop Software.
This can be downloaded for free from http://us.blackberry.com/apps-software/desktop/
After the Back Up is complete I need you to unplug your PlayBook and then push and hold down the Power Button until the unit Force Powers Off.
Now, while Desktop Software is still open on your computer and the PlayBook Powered Off, Connect the PlayBook to your computer.
You should see and error screen from Desktop Software pop up that has the options to Retry, Update, or Cancel.
QUICKLY choose the Update option.
This will erase all the information off of your PlayBook and Re-Write the Software back onto it. Once it's complete your PlayBook will need to go back through the setup wizard, and you can then perform a restore using Desktop Software to return your information. The only thing that won't come back after the restore are the apps that you downloaded from App World but they can be easily Re-Installed using the My World feature in App World.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Similar Messages

HT4972 i have a 4.21 version and i need a 4.3 version but it wont show any signs of saying software update underneath the 'about' section

i have a 4.2.1 i pod touch and it says i need a 4.3 ios version and it wont show any signs of software update underneath the 'about' area i dont know how to change this

It is likely you have a 2G iPod. Those can only go to 4.2.1
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

Iphoto wont show any photos on Iphone 4 after update to 7.1

Hi, everything was working perfect with my Iphoto and iphone when was the time to import the pic form the phone, but after update my Iphone 4 to ios 7.1 my Iphoto wont show any photos or videos to import from my iphone, please help !!! Im using Mac OS X 10.6.8, Iphone 4 Ios 7.1
Thank you so much !

Exactly the same ting has happened to me over te past few days with my ipad2... I too resorted to setting my ipad2 up as a new device again to get match working... There is definitely something screwy happening on 5.1 I think... It was fine till I updated

TS1398 After updating to iOS 7 my iphone 5 won't show any wifi networks or connect to any wifi even after resetting the network connections. HELP!

After updating my iphone 5 to iOS 7 my phone won't show any wifi networks or connect to any. I reset the network connections and still nothing.

I Just found it on the apple site, it arrived on a cd a few days later and worked just fine again.
i would recommend backing everything up just in case. Better safe than sorry, trust me. I've lost so much when i didnt back up once when re-installing the system.
IT shoulldnt erase everything, bt it might, so back up just in case
should you loose everything, then i have some tips on moving stuff fromyour iphone/ipod to the computer

Playbook wont find any networks

I have a blackberry playbook, i was using it this morning and i put it on standby and after a few minutes, my playbook lost the wifi network and woudnt find any wifi network what so ever. So i decided to security wipe it and then it wont go past the select network page as the playbook cant find any wifi networks.
Please can someone help

Where were you obtaining your wifi signal from, your own router or a neighbours router. Maybe the router shutdown. If you do not have physical access to your router, try an open source at McDonalds or Starbucks.

My ipod touch wont connect to wifi after i reset the network settings

my ipod touch wont connect to wifi after i reset the network settings

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

My iphone wifi problem wont detect any wifi networks and wont detect any bluetooth networks.

my iphone wifi problem wont detect any wifi networks and
wont detect any bluetooth networks.

https://support.garmin.com/support/searchSupport/case.faces?caseId=%7Bb62e0460-4 d48-11e3-f27b-000000000000%7D from the Garmin Support site. The iPhone 4 is not compatible because it does not support the low energy bluetooth transfer that the iPhone 4s and later do.
It should connect properly with your iPad mini, but it requires an App. Also mentioned on Garmins' site.

CAN'T open any applications after mac os update 10.4.11

CAN'T open any applications after mac os update 10.4.11 help

General advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/kb/DL170
And for Intel Macs here: http://support.apple.com/kb/DL172
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was [i]not[/i] a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
[b][i]Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on.[/b][/i] Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

Does anyone know why the sharpness slide control in the edit facility of iPhoto hasn't worked on any iMac after the iPhoto update near the end of 2011?

Does anyone know why the sharpness slide control in the edit facility of iPhoto hasn't worked on any iMac after the iPhoto update near the end of 2011?

Does anyone know why the sharpness slide control in the edit facility of iPhoto hasn't worked on any iMac after the iPhoto update near the end of 2012 ? (not 2011)

Java preferences window doesn't show the tabs after jdk 7 update 7 installations

java preferences window doen't show the tabs after jdk 7 update 7 installations, before the installations of jdk 7 u7 the tabs in the java preferences window were visible

Then, dump Chrome or uninstall Java 7u7 and connect back tol Java SE 6:
Q: Can I restore Apple Java 6 after uninstalling Oracle Java 7?
A: Go back to Apple Java 6 using the following instructions:
Uninstall Oracle Java 7 by deleting the plug-in file. From a Terminal window enter:
sudo rm -rf /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
Create a symlink using the following command, entered on a single line:
sudo ln -s /System/Library/Java/Support/CoreDeploy.bundle/Contents/JavaAppletPlugin.plugin /Library/Internet Plug-Ins/JavaAppletPlugin.plugin

IWork (Pages) does not work after last system update!

since some days (after last system update) iWork programms are not starting any more!
macosx 10.7.5 new update
solution atemd: cancel p-ram and p-list, re-installing iwork from DVD and update it from http://support.apple.com/kb/DL1563
macbookpro 2.53 ghz intel core 2 duo, 8 gb ram
any body an idea what i can do to fix it?

hi - i think you should not use 'xhost +' - it's not secure and you shouldn't need it....
in your .bashrc or .cshrc or whatever, you should have setenv DISPLAY .0 or the equivalent export...
then ssh -Y hostname should be all you need... no xhost, and not setting DISPLAY every time...
could you enter the following command from a terminal window and post back the results?
grep X11 /etc/ssh*_config
cheers

Why does my iPhone 5c not show any wifi/internet when on wifi screen?

When I go to "Settings" and then go to "Wifi" it trys to load the available wifi connections, but it doesn't load anything. I went on a 3-day camp and there was no wifi, so, I put on airplane mode for most of the camp to play my games and then when I go to my cousin's house no wifi shows up. After that, I came home and no wifi showed up again. Then I searched up on how to fix it and I did everything that was listed, turn cellular data on and LTE on, reset network settings, and restore my iPhone to last backup, and nothing happened it still doesn't show up. If you guys know any way to fix this, reply to this thread or discussion please.

No... FaceTime is permanently removed from devices sold in certain middle eastern countries. There is no way to install it regardless of where the device is being used.

My iphone 4 will not show any wifi networks

my phone will not show any wi-fi networks i'm not sure whats wrong, i tried restoring multiple times nothing changed.. im not sure what to do.

I have this Exact same issue, I bought it from a friend though, and it will not show any networks to choose while I am at home and my computer and other phones are connecting perfectly to my wifi. I have tried to reset the network settings, I just restored the whole phone when I transferred my info to it. If anyone knows of anything else please advise.

R12 Invoice Concurrent LOV not showing any Invoice after upgrade from 11i

Hi All,
We had 11i instance and then we upgraded to 12i.
Now one seeded program named "Invoice Print Selected Invoices" has a parameter called "Transaction Number Low"
, having LOV AR_RAXINV_TRX_NUMBER ,
does not show any record in R12.
When i opened LOV i could see following tables:
1. RA_CUSTOMER_TRX
2. RA_CUST_TRX_TYPES
3.AR_LOOKUPS L1
We are using this value set for one of our custom object too.
I was wondering if it is not pulling any data for seeded how it could it pull for custom objects.
I am a newbie in R12.
Any one has any idea why is it so , i can speed up my work and learn from your experties.
Thanks,
Swapnesh Parmar

Hi
Did you get the above sorted ? how ?
I have a similar problem with Selected Invoice Print where the Transaction Type parameter lov doesn't show any values. The seeded value set uses ra_cust_trx_types which (in R12) is a synonym for ra_cust_trx_types_all.
There is data on ra_cust_trx_types_all.
Pam

I have just updated itunes and now it wont show any of my devices to sync to in corner or screen and all the media

i have just updated itunes now it wont show my device to sync to in corner and all the media (mucic, movies) have red text instead of being normal .. whats going on freaking out???

Since iOS 5 has not been released yet, it's interesting you say you've already downloaded it. Trash the file you downloaded and wait for the official release. It will probably drop around 10:00 California time.

My playbook wont show any wifi after a system update

Similar Messages

Maybe you are looking for