My player does not start

Hi,
I have a mx-00 digital mp3 player. when I try to open it, some error messages apear on the screen : "please download -DEFAULT.ROM- file from the CD" and after that "buildUpL2PTable() wrong uiLBadAddress! addr=0x00000000" and then the player shuts down itself.
My computer does not give any reaction when I plug the player to the usb, so I cannot format and install the firmware.
Does anyone know how to fix this problem?

secostu,
Follow the steps in Knowledgebase article to try formatting and updating the firmware. Look under the listing Rhomba and use the method according to the firmware version that your player has.
Jason

Similar Messages

  • CD player does not automatica​lly start

    HP Presario CQ71-140EA;  Windows 7 Proffesional.
    When inserting a CD in the CD drive the player does not automatically start.
    I have to initiate Windows Media Player or iTunes before the CD plays.  Any ideas please??
    This question was solved.
    View Solution.

    Paul,
    Very many thanks for your help.  I have had to use the gpedit.msc file to enable the Autoplay feature on my CD drive.
    I had already enabled the Autoplay feature in the control panel, however this did not work, hence my enquiry.
    I note the comments about the vunerabilities caused by the Autoplay feature!.
    Kind regards.
    adw101

  • Flash Player Does Not Work with IE8 and Windows XP

    I am using Windows XP VR 5.1 with SP3. Flash Player does not function? So videos will not play that use Flash Player. The Adobe Support Site has been 000 Help because it is a free product. Microsoft says it is an Adobe problem. Finger pointing to the nth degree. I have loaded the latest version of Javascript and Flash Palyer.. Any ideas?

    Resetting IE is a shotgun approach, but may be much easier (and faster) for a user than trying to troubleshoot and find exactly which add-on, control, setting is causing issues. For a fast approach, you can reset IE, then start re-installing the add-ons you wish to use. Here is a kb that describes the process and even provides a Fix it: http://support.microsoft.com/kb/923737
    If you’d like to troubleshoot, here are some steps that will fix most issues with Internet Explorer and Add-ons. This can be more of a scalpel approach, and could help you save your cookies, stored passwords, etc.
    1)      Update your Windows software
    a.       Follow the steps below to view updates that are available for your computer.
                                                       i.      Click to go online to the Windows Update website
    1.       Note: If Microsoft Update is not installed, you will be taken to the Windows Update website. See the note below if Microsoft Update is not installed.
                                                     ii.      Click Custom to check for available updates. In the left pane, under Select by Type, click each of the following links to view all available updates:
    1.       High Priority
    2.       Software, Optional
    3.       Hardware, Optional
                                                    iii.      Select the updates you want, click Review and install updates, and then click Install Updates.
    b.      What do I do if Microsoft Update is not installed?
                                                       i.      Follow the steps below to install Microsoft Update and check for updates.
    1.       Click to go online to the Windows Update website
    2.       Click the Go button next to the Get Microsoft Update Today and then click Start Now.
    3.       Review the license agreement, and then click Continue.
    4.       After setup is complete, click Check for Updates.
    5.       Click Custom to check for available updates. In the left pane, under Select by Type, click each of the following links to view all available updates:
    a.       High Priority
    b.      Software, Optional
    c.       Hardware, Optional
    6.       Select the updates you want, click Review and install updates, and then click Install Updates.
    2)      Turn off Internet Explorer add-ons you don't recognize
    a.       When you visit a website, an add-on might be downloaded without your knowledge, or you might be prompted to download an add-on. These add-ons might cause Internet Explorer to run slowly or become unresponsive. You should remove all Internet Explorer add-ons you don't recognize or trust.
    b.      How do I spot malicious add-ons?
                                                       i.      You can usually spot malicious add-ons under the Name column in the Manage Add-ons dialog box. Malicious add-ons might have:
    1.       Blank names.
    2.       Names that include random characters or have a sequence of numbers and letters (for example, fhriduvh.dll or f6rid8vh.exeas as opposed to Windows Messenger).
    3.       A publisher name you might not recognize.
    c.       How do I disable an add-on?
                                                       i.      Open Internet Explorer.
                                                     ii.      Depending on your version of Internet Explorer, do one of the following:
    1.       In Internet Explorer 6, click the Tools menu, and then click Manage Add-ons.
    2.       In Internet Explorer 7, click the Tools menu, point to Manage Add-ons, and then click Enable or Disable Add-ons.
    3.       In Internet Explorer 8, click the Tools menu, click Manage Add-ons, and then click Toolbars and Extension (if necessary). Also note the drop down list labeled “Show:” You are interested in Add-ons and Downloaded
    4.       Follow these steps to determine the version of Internet Explorer you're using:
    a.       Open Internet Explorer.
    b.      Press ALT+H, and then click About Internet Explorer.
    c.       How can I find which version of Internet Explorer I'm using if it won't launch?
                                                                                                                                i.      If you're unable to launch Internet Explorer you can use the following steps to determine the version you're using:
    1.       Click Start, click Run, type %ProgramFiles%\Internet Explorer, and then click OK.
    2.       Right-click iexplore, click Properties, and then click Version.
    3.       Under Item name, click File Version. The version number appears under Value to the right of File Version.
    a.       Note:If the file version number begins with 6, you have Internet Explorer 6. If the file version number begins with 7, you have Internet Explorer 7. If the file version number begins with 8, you have Internet Explorer 8.
    d.      If you aren't using the latest version of Internet Explorer, consider updating.
                                                                                                                                i.      How do I update to the latest version of Internet Explorer?
    1.       Click to download and install the latest version of Internet Explorer        
                                                                                                                              ii.      How can I update Internet Explorer without launching my web browser?
    1.       Click to go online to the Windows Update website.
    2.       Click Custom to check for available updates.
    3.       In the left pane, under Select by Type, click Software, Optional.
    4.       Select the Internet Explorer update, and then click Review and install updates.
                                                    iii.      Click the name of the add-on.
    1.       Click Disable. You might have to restart Internet Explorer for the changes to take effect.
    2.       Why do some add-ons include (Not verified) in the Publisher column?
    a.       If (Not verified) is displayed in the Publisher column in the Manage Add-ons dialog box, the add-on itself is not digitally signed even though the program that installed it might be. A digital signature verifies that a file comes from the person or publisher it claims to be from, and that no one has tampered with it since it was digitally signed.
    3.       How do I disable an add-on if I can't access Internet Explorer?
    a.       Click Start, and then click Control Panel.
    b.      Double-click Internet Options.
    c.       Click the Programs tab, and then click Manage Add-ons.
    d.      Click the name of the add-on you want to disable, and then select Disable.
    e.      When the Add-on Status dialog box appears, click OK to close it.
    3)      Perform a free Full Service Scan using Windows Live OneCare safety scanner (not necessary if you don’t suspect viruses and are confident in the protection you have on your machine).
    a.       Go to the following website, and then click Full Service Scan: Windows Live OneCare safety scanner
                                                       i.      http://go.microsoft.com/fwlink/?linkid=56726
    If you are still experiencing issues, perform these steps. If the issue subsides, you may discontinue the remainder of the steps
    1)      Disable all add-ons (one at a time) until you can no longer reproduce the problem
    a.       Close all Internet Explorer windows.
    b.      Click Start, and then click Control Panel.
    c.       Click Network and Internet Connections, and then click Internet Options.
    d.      Click the Programs tab, and then click Manage Add-ons.
    e.      Click the name of the add-on you want to turn off, and then, under Settings, click Disable.
    f.        Click OK.
    g.       Restart Internet Explorer. Continue using Internet Explorer the same way you did when you received a crash report. If Internet Explorer continues to crash after disabling this add-on, continue with the next step.
    h.      Repeat steps b through g for each add-on listed. When you can no longer reproduce the problem, the most recently disabled add-on is the cause of the problem. Once you discover the add-on that is causing the issues, you can uninstall it (use Manufacturer’s uninstaller if one is provided) then if you wish to continue to use the add-on, install the latest version from the manufacturer’s site.

  • Flash player does not work after I installed it

    Flash player does not work after I installed it

    I'm using Mac Osx and my browser is Safari
    Date: Wed, 5 Feb 2014 00:41:29 -0800
    From: [email protected]
    To: [email protected]
    Subject: Flash player does not work after I installed
        Re: Flash player does not work after I installed it
        created by Mike M in Installing Flash Player - View the full discussion
    This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
    What OS are you using?
    http://mmonlinedesigns.com/images/os.png
    What browser?
    http://mmonlinedesigns.com/images/browsers.png
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Installing Flash Player at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Flash player does not work in Windows 8 tiles

    Flash player does not work in Windows 8 start metro tile applications. Flash player also does not work in Windows 8 start tile internet explorer 10 1n windows 8. Flash player does work in Windows 8 desktop internet Explorer 10. I tried all of the recommended fixes suggested by adobe Flash Player Issues/windows 8 page. I have reinstalled Windows 8 operating system.  What should I try next?

    This is a known issue with Flash Pro CC - GM build.
    this crash has been fixed in the update that was released recently. Please update to 13.0.1.808 version and it should fix this.
    Please reply if it still persists after the update.
    -Sujai

  • Mini player does not work, can only switch playlists by closing and restarting iTunes

    For the last few versions of iTunes, my mini player does not work, only choices are large window and larger window.  Also, if I am listening to a playlist and hit the pause button, then switch to another playlist, the old playlist keeps playing when I hit play.  The only way I can figure out to switch playlists is to quit and relaunch iTunes.

    try rebooting the ipad
    you know holding down the on button and the home button until the slider comes
    and turn it off and start it up again

  • Adobe Media Encoder does not start queue

    Hi, 5 days ago I started having problems with AME 6, just updated version 6.0.3.1 (64 bit). I work with premiere 6  version 6.0.5, windows xp, always worked since this week, AME :doesn.t start the queue. after 2 minutes working you can hear the sheep sound and the report says: unknown error, unable to locate or read original file. I updated everything was available, reinstalled the suite (premiere and encore 6), it's still not working.
    Do you have any idea about the problem?
    thank you
    Francesco

    The status "Waiting" indicates that the job is ready to be encoded. As of CS5.5, AME by default does not start processing the Queue automatically. Instead, it waits for you to start encoding by clicking the Start Queue button in the upper right corner of the window--it looks like the Play button on a media player or editing app. Watch folders are an exception to this rule: jobs that come in via watched folders start automatically by default.
    You have the option of having AME start encoding automatically. To enable this, check the "Start queue automatically when idle for <n.n> minutes" and set the desired wait period.

  • Dvd player does not work after Leopard upgrade

    I installed Leopard, had to upgrade because my printer died and no printers now work with Tiger.  Since the upgrade, my DVD player does not work.  I have problems burning some cd's too.  Is this a known issue?  What is the fix?

    I have read a couple of complaints like that, but not sure it's widespread.
    At this point I think you should get Applejack...
    http://www.macupdate.com/info.php/id/15667/applejack
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 6 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 6 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
    Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
    If that does NOT help, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
    Then move these files to the Desktop...
    /Users/YourUserName/Library/Preferences/com.apple.finder.plist
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    /Users/YourUserName/Library/Preferences/com.apple.desktop.plist
    /Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
    Reboot & test.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
    If that does NOT help then I suspect the optical drive or media itself, or possibly just needs a cleaning CD run on it.

  • 16 GB x-Fi Style - does not start after charging

    Hi,
    4 weeks ago I bought my x-Fi style and used it during my holidays for 2 weeks. After charging the player only twice (USB-connection with notebook), it now fails starting. Maybe there is an internal temperature fuse to protect from overheating and I only have to wait to try again? After connecting to USB the CREATIVE sign appears but disappears directly and a battery symbol appears and remains on the screen. After disconnecting the player does not react in any way. I already tried to reset but cannot start it again.
    Can anyone help me?
    Cheers,
    Uli

    Re: 6 GB x-Fi Style - does not start after charging:Just fyi
    I found the website for Creative to be very frustrating. Not one snail mail address or corporate headquarters info. The link for website feedback didn't work and one other customer service link was a dud. They clearly don't want to be 'bothered' with complaints, or anything positi've for that matter!
    But, I searched on the forum and found a three-year-old post about someone who was frustrated with having to carry around a paperclip to always push 'reset' on his X-Fi -- and the light dawned! Didn't know I had one of those. I pressed reset and voila! it is working again. Still had to charge it, but it accepted the charge this time and I was able to finish my book and move on to the next. Now, the next problem is I tried to access my wireless network which has a $ in the password and there is no $ in the choices for entering a password. So, now I have to change the password, change all of my device passwords (Blu-Ray, iPad, laptops(2), friend's laptops, etc. a huge pain. Seems to me they could have included a $ in the choices!

  • Dvd player does not read windows 7 dvd

    i have bought a this windows version
    Windows 7 Professional 64 Bit OEM inkl. Service Pack 1
    but my dvd player (imac 24", core 2 duo, 2,8 GHz, 4GB) does not start this dvd.
    anyone knows why??
    thanks for answers.

    If you want to run MS Windows Simultaneously with OS X you can buy either Parallels or VMWare Fusion. Follow the installation instructions for the app you choose, both do the same thing. There are several advatages of using Parallels or Fusion including:
    1. Running OS X & Windows simultaneously
    2. You can run Windows XP, Vista and/or Windows 7
    You can also use Boot Camp which comes with OS X to run Windows 7. The downside is you can only run one operating system at a time, either MS Windows or OS X. If you are a Windows gamer this is the best option for 3D gaming. In order to install follow the instructions in Boot Camp Assistant, you can find BCA in Applications - Utilities - Boot Camp Assistant and then follow the on-screen instructions. 

  • After upgrading FireFox to V 26.0 Real Player does not load. I downloaded Real P but it will not execue. Says "side by side config is incorrect. Please see th

    Videos don't load, just black screen. Followed instructions and download Real Player. Real Player does not execute, provides message "The application failed to start because its side-by-side configuration is incorrect. Please see application event log or use the command-line sxtrace.exe tool for more detail."
    Can you please tell me where to go from here?

    Hi, its microsoft issue, please go-through the below link
    *http://support.microsoft.com/kb/2525435
    *http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/error-the-application-has-failed-to-start-because/df019c0d-746e-42d0-ad68-465e18e3f3ef

  • DVD player does not see a dvd or cd

    on my notebook, a pavilion dv5, the cdrom player does not see a dvd or cd, this happened suddenly, not after installing things. it is an optiarc BDRom BC5500S. On internet I do''nt find any software for the driver The standard problemsolving [rogram does not work

    Hallo, Arie:
    Voor het oplossen van deze fout Code 39, volg deze instructies:
    Opmerking: Na deze registersleutels verwijderen en opnieuw op te starten, het kan noodzakelijk zijn om het CD- of DVD-opname toepassingen opnieuw installeren.
    1) Sluit alle geopende programma 's
    2) Klik op Start, uitvoeren en typ REGEDIT en druk op Enter
    3) Klik op de plustekens (+) naast de volgende mappen
    HKEY_LOCAL_MACHINE SYSTEM
    CurrentControlSet
    Controle
    Klasse
    {4D36E965-E325-11CE-BFC1-08002BE10318}
    4) Deze map is de DVD-/ cd-rom-station klasse Beschrijving in het register. Kijk voor een van de volgende namen in de rechterkolom.
    UpperFilters
    LowerFilters
    UpperFilters.bak
    LowerFilters.bak
    5) Als een van de bovenstaande sleutels weergegeven in stap 4 worden weergegeven, klik op hen met de rechtermuisknop en kies verwijderen
    6) Na het verwijderen van sluit de sleutels, de Register-Editor
    7) Opnieuw opstarten uw computer
    8) Open mijn Computer en controleer als uw CD- of DVD-stations zijn teruggekeerd. U kunt ook open Apparaatbeheer en controleer of de gele uitroepteken en fout code op het CD- of DVD-station is verdwenen.
    Als u Adaptec Easy CD Creator hebt, ontvangt u een fout Code 31 in plaats van fout Code 39, dezelfde procedure hierboven zal werken voor de foutcode 31, 32 en 39.
    To solve this Code 39 error, follow these instructions:
    NOTE: After removing these registry keys and rebooting, it may be necessary to reinstall any CD or DVD recording applications.
    1) Close all open programs
    2) Click on Start, Run, and type REGEDIT and press Enter
    3) Click on the plus signs (+) next to the following folders
    HKEY_LOCAL_MACHINE SYSTEM
    CurrentControlSet
    Control
    Class
    {4D36E965-E325-11CE-BFC1-08002BE10318}
    4) This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.
    UpperFilters
    LowerFilters
    UpperFilters.bak
    LowerFilters.bak
    5) If any of the above keys shown in step 4 are listed, right-click on them and choose Delete
    6) After deleting the keys, close the Registry Editor
    7) Reboot your computer
    8) Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.
    If you have Adaptec Easy CD Creator, you may be receiving an Error Code 31 instead of Error Code 39, the same procedure above will work for the Error Code 31, 32, or 39.

  • Smartwatch 2 not working (update does not start, SW is stuck)

    Hello. I just bought SW2. I turned on NFC on my phone and placed SW2 on the back of my phone. Phone and SW2 made connection. SmartConnect was installed on my phone BUT then it wants me to install SW2 app (release date 13.12.2013). OK it installs the SW2 app and then progress bar appears on my SW2 and thats it. No progress at all. Phone just saying "downloading updates to SW2" but never starts. I waited two hours but nothing happend.
    I try to describe averything I have tried in detail, hoping so that someone can help me.
    I tried to use Sony Mobile Update service. I connected SW2 to my PC and Sony Mobile update service said that there is update available. So I do the update, SW2 restarts BUT then all starts over again. SW2 app is still trying to download updates but nothing happens. I tried to uninstall everything and reinstalling SmartConnect and SW2 app but that did not help.
    Then I used someone elses phone. I connected SW2 with other phone than mine, pairing worked, SW2 app managed to install the updates (this is where i got stuck with my phone) on SW2 and everything worked. Then I did reset on the SW2 and paired with my phone again. Pairing seems to work. Phone says that SW2 is connected BUT nothing really works. No notifications, facebook app does not show anything. Smart Music Player does not work, Smart Camera does not work. When I click on any app that needs to interact with my phone, a "waiting bar" appears for a few seconds and then nothing, silence. Whe I turn off the bluetooth on my phone, the SW2 app says that SW is disconnected and then I trun on the bluetooth, then it connects again. SW2 and phone seems to be connected but it seems that no information is moving between them. And then there is the battery drain. When SW2 and phone are "connected", the battery on my phone lasts about 3 hours max.
    So I tried the Sony Mobile Update service again. Suprisingly. update was available, even tough I did the update befoe AND with my friends phone. So i do the update again and now I am back where I started - my SW2 and phone are "connected" and SW2 app wants to install updates to SW2 but the downloading process does not start and I can not use SW2 without it. So I need my friends phone again just so that I can use SW2 as a regular watch.
    My phone:
    LG-P940 (Prada 3.0)
    Android 4.0.4 ICS
    I have heard that people with LG phones are experiencing the same issue...

    It seems that we are suffering from the same problem I also have an LG phone aswell.

  • DVD Player does not launch

    When I insert DVD's, even commercial ones, into my MacBook Pro, DVD Player does not automatically launch even though I checked "When a disc is inserted, start playing disc" in DVD Player's preferences. DVD Player works, however, when I manually launch it after inserting a disc. Also, sometimes the disc drive will not load the disk completely until I press "Eject". Any thoughts?

    In System Preferences/CDs & DVDs have you set "When you insert a video DVD" to 'Open DVD Player' ?

  • Flash 8 does not start

    Flash Professional 8 does not start anymore. Any idea what's
    going on? I tried removing and re-installing, but it does not help.
    I do see Flash.exe, but it's hardly using any memory. The CPU usage
    is high on the system process.
    Windows XP

    Hi, zokszo. Welcome to the Discussions.
    While the following Adobe tech note applies to Flash Player, you may find some of the steps therein helpful:"Troubleshooting Adobe Flash Player for Intel-based Macs."
    Otherwise, I suggest you:
    • Search Adobe's Macromedia Flash Support Center
    • Search or post on Adobe's Flash Forums. See also this topic and this topic on the Flash forums.
    I don't mean to send you somewhere else, but whenever one has problems with third-party applications, the first place to start troubleshooting is with the application's documentation, then vendor's web site. Usually their sites have FAQs, lists of known bugs, or application-specific forums similar to these Discussions. Sometimes, unlike the Apple Discussions, the questions are even answered by employees of the vendor.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

Maybe you are looking for