My playlist is my printing right.will it be fixed soon
my playlist for the jewel case wont print correctly will it be fixed soon?When might it be coreected?
Apple will exchange your iPod for a refurbished for this price:
Apple - Support - iPod - Repair pricing
A third-party place like the following may be less expensive. Google for more places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Fix it yourself
iPod Touch Repair – iFixit
Similar Messages
-
After my last update I can't start up an other keynote presentation from a link (only when the other presentation is already open) I hope there will be an fix soon.
I thought it was because of Lion but with snow leopard i have the same problem (On another Mac).
Other solutions????To check the local network for some of the common configuration problems, launch Terminal.app and issue the following diagnostic command:
sudo changeip -checkhostname
That'll report some local configuration information and then either no errors detected and no changes required, or it'll point to whatever configuration errors or issues it might detect. That doesn't catch everything, but it catches the common errors.
FWIW, 192.168.0.0/24 and 192.168.1.0/24 are poor choices for the local network, as VPNs are based on IP routing and IP routing gets tangled when the same subnet is used on both ends of the VPN. 192.168.0.0/24 and 192.168.1.0/24 are near ubiquitous in home networks and coffee shops. -
Firefox 5.0 won't work with mcafee site advisor-will this be fixed soon?
When I downloaded firefox 5.0 it checks for incompatible add on etc. and it deleted mcafee site advisor which shows which web sites are safe to use. I went back to firefox 4.0 because it works with site advisor. I'd like to use the newest form of firefox, but want mcafee site advisor enabled. Will this be fixed?
It will work again if McAfee does a full update...
-
TS1382 Playlist doesn't print right what can i do to fix it
I made a playlist and once I wanted to print it out the it comes out wrong. The title is fine just the songs on the playlist is all bunch together. I don't know if I checked something that I did by accident. This is only problem I am having printing out on a playlist.
One of your add-ons might be the culprit. Try running Firefox in [[Safe Mode]] with all add-ons disabled. If that solves the problem, see [[Troubleshooting extensions and themes]] and possibly [[Troubleshooting plugins]]
-
Just wondering if there is anything coming out soon. Kind of a big missing chunk from the iPad features list in my opinion. Thanks.
The website version is nowhere near as functional as the original app. It can't even go into fullscreen mode. I hope Google will make a decent version of YouTube for the iPad like they did for the iPhone. Third party apps seem to fall short in terms of software fluidity and features right now.
-
Firefox 4.0 loads pages very slowly - will this be fixed soon?
I upgraded to version 4.0 and it is much slower in page loading then any of your previous versions. Are you going to be fixing this problem soon? Or do I need to look for a different web browser to use... Very disappointing! So much for FASTER than before - NOT!
It will work again if McAfee does a full update...
-
ITunes New Release - Printing a playlist to my printer the header prints, but the song list all print in the same place. I am able to print from any other source. Does anyone else have this problem? Not sure if I should completely uninstall my ITunes and reload from scratch. Sure would appreciate any help you could provide as I really need to get some playlists printed now. Thanks - Scott
There is another discussion of this problem under "can't print cd jewel case inserts"--about 20 people on that page have the same problem.--I have a "band-aid" fix for anyone is in a hurry. When you go to print, choose the option "large playlist" (I think it is the last option). You can then print at least the songs that are on the playlist. Then, you can print a mosaic copy to get the album art work. Then you get out the scotch tape & tape them together! This is UNACCEPTABLE but it will do in a pinch. Someone on the other page suggests we all write in "itunes" feedback & complain.
-
JA4580 will not print right border of document in any reduction
My printer cuts off right edge of document in any reduction. Can not access print preview.
Please advise correction in non technospeak.Hi @rjclark42,
Welcome to the HP Forums!
I noticed that your HP Officejet J4580 will not print right border of document in any reduction. I am happy to look into this for you!
For further assistance, I will need to know:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, Ethernet, or USB.
If the printer is able to make copies.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
The name of the program you are printing from.
If you are using Windows, please try our HP Print and Scan Doctor, and let me know what happens!
Please see this post, Want Good Answers? Ask Good Questions, by @Bob_Headrick, so you can get the most out of these forums.
Thank you for posting, and hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
Cancelled print but will not cancel and comes back on to print same job
cancelled print but will not cancel and comes back on to print same job on on hp deskjet all in one
Hi,
From the Control Panel, open Administrative Tools and select Sevices. Browse down to the print spooler service, right click it and select Properties then click on the Stop button. Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
Restart the computer and you should find the job has been removed.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Print Queue will not remove print jobs
I am running Windows Server 2008 R2 Standard. I have a Printer HP LaserJet P4015n set up as a network printer thru DNS. The printer is working fine all print job will come
out. Each time I send a print job to stays in the queue with the Status "Sent to printer". If I send another print job to the printer it will print out however the job will stay in the queue. I have added the printer to a user’s machine and they were
able to see all the print jobs in the queue. I have stops and started the spool however it does nothing. I have already reinstalled the printer but it has done nothing to help.
After about 5 - 10min of the jobs are sitting the in the queue they delete themselves.
Does anyone know of anything I can do about this?Hi,
Thanks for the post.
Here is something I need to confirm:
1. Does this issue occur with other network printers?
2. Does this issue occur when printing a text file?
If this issue just occurs with HP LaserJet P4015n, it is caused by the specific printer driver.
Now please perform the following steps to troubleshoot this issue.
Clear spool file
1. Stop the spooler by doing the following:
a. Click Start , Settings , Control Panel , Administrative Tools , then Services .
b. Scroll down the list of services for the Print Spooler.
c. Right click Print Spooler and click Stop .
2. Delete the spool files
a. Open My Computer.
b. Go to C:\WINDOWS\system32\spool\PRINTERS\ .
c. Delete all of the files inside of this folder.
3. Restart the spooler.
a. Click Start , Settings , Control Panel , Administrative Tools , then Services
b. Scroll down the list of services for the Print Spooler.
c. Right click the Print Spooler and click Start.
Change the spooling format
Set the spooling format to RAW, and then try to print directly to the printer instead of spooling the print job. To do this:
a. Click "Start", point to "Settings", and then click "Printers".
b. Right-click the printer that you are using, and then click "Properties".
c. In the Advanced tab, click "Print Processor".
d. Set the default "Data type" to "RAW" for both "WinPrint" and "ModPrint".
f. Click "OK", click "OK" again, and then close the Printers dialog box.
Does it work?
Hope this helps.
Miles
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
HP Deskjet 3920 advanced printer drivers will not install on my laptop
I can't share HP Deskjet 3920 with Win 7 64 bit cause can't install advanced printer drivers for x64 on Win XP, error message like: "need some drivers from Windows XP CD-ROM" - and can't find it there (need for sRGB.ICM file).
If I manually point this file, the install process loops endlessly.
Spoiler (Highlight to read)
Spoiler (Highlight to read)
Spoiler (Highlight to read)Hi Yaugen,
Try these instructions. The main task is to get Windows XP and Win7 to share resources.
Step one: Windows 7 Homegroup must be setup
Printer sharing must be setup in the Homegroup settings, if one of the computers in the network is using Windows 7.
1. Click Start
2. Click Control Panel
3. In the upper right corner ensure that View by has Large icons or Small icons selected.
4. Click Network and Sharing Center.
5. Click Choose homegroup and sharing options
6. If the Homegroup is not setup, you need to set up your homegroup before continuing.
Step two: Set the Workgroup on each computer
Each computer on the network must be set to the same Workgroup. The workgroup name needs to be changed from the default to a new name.
Windows XP:
1. Click Start.
2. Right click Computer and then left click Properties.
3. The default Workgroup is WORKGROUP.
4. The name of the Workgroup should be changed from the default.
5. In System Properties, click the Computer Name tab.
6. Click the Change button.
7. Enter the Workgroup name that is used by your entire network. If you are changing the Workgroup name, use the same name used in Windows 7.
8. Click OK.
9. You must restart your computer for the change to take effect.
Windows 7:
1. Click Start.
2. Right click Computer and then left click Properties.
3. The Workgroup is listed in System Properties.
4. The default Workgroup is WORKGROUP.
5. The name of the Workgroup should be changed from the default.
6. Change your Workgroup in Windows 7 by clicking Change settings.
7. Click the Change button.
8. Enter a new Workgroup name that will be used by your entire network.
9. Click OK.
10. You must restart your computer for the change to take effect.
Step three: Setup a share account on each computer in the network
Create a common share account on each of the computers, including the computer that is sharing the printer to the rest of the network. This share account must have the same name and password on each computer.
If you decide to use an existing account that appears on each computer all ready, this existing account must be password protected. If you do not want to password protect your default login, create a new share login as described in the following steps.
Windows XP
1. Click Start
2. Click Control Panel
3. Click User Accounts
4. Click Create a new account.
5. Enter the same user account name created as the share account on the Windows 7 computer.
6. Click Next.
7. Under “Pick an account type”, select ‘Computer Administrator’.
Note: In Windows XP you must select Computer Administrator in order setup a printer.
8. After you new account is created, select it under ‘pick an account to change’.
9. Click Create a password
10. Enter the same password used when creating the share account on the Windows 7 computer, following the directions on the screen.
11. Click Create Password button.
12. Log off your current user account and log into the new share account to activate it.
13. Once the computer is ready after logging into the share account, you can log off the share account and back into your regular user account.
Windows 7
1. Click Start
2. Click Control Panel
3. In the upper right corner ensure that View by has Large icons or Small icons selected.
4. Click User Accounts
5. Click Manage another account
6. Click Create a new account
7. Select Standard User
Note: The account created should be created with the lowest security setting necessary. Creating the share account as an administrator is discouraged.
8. Enter a new user account name. Use a name that is easy to remember as the account used for sharing resources across your network. For example: ‘ShareAccount’
9. After your new account is created, select it under “Choose the account you would like to change”.
10. Click Create a Password
11. Enter a new password, following the directions on the screen.
12. Click Create Password button.
13. Close any remaining opened windows, making a note of the new account name and password as you will need to create identical accounts and passwords on the other computers on your network.
14. Log off your current user account and log into the new share account to activate it.
15. Once the computer is ready after logging into the share account, you can log off the share account and back into your regular user account.
Step Four: Share the printer to the network
The computer that has the printer attached and installed by USB must have the printer shared to the network.
Windows XP
1. Open the printers and faxes folder in Windows XP.
Note: A hand symbol under the icon for the printer indicates it is already shared to the network.
2. Right click on the printer to be shared to the network.
3. Left click on Sharing.
4. Click “If you understand the security risks but want to share printers without running the wizard, click here”.
5. Select “Just enable printer sharing”.
6. Click OK.
7. Select “Share this printer”.
8. If the Share name is acceptable, click OK.
9. If you want to change the Share name, enter a new name. Click OK.
Note: If the Share name entered is longer than 8 characters, you will get a warning that the printer will not be accessible from MS-Dos computers.
Step five: Install the appropriate software for your printer
Install the printer software on the other computers on the network that will need to access the shared printer. Install the correct driver for the printer model for each computer on the network. Not all printers will need to have a driver installed, only newer printers.
1. Check for available drivers – visit the HP website and download available drivers.
Note: Even if you have an install CD for your older HP product, there may be an updated driver for your printer.
2. Launch the driver setup by double-clicking on the downloaded driver.
3. If the driver install process requires you to attach the printer USB cable to continue, click cancel instead. This will roll back the install, but it will leave the driver files installed.
4. Select the USB connection type. Look for the checkbox labeled “Connect later – Do not connect to the printer now. I will connect it later”.
Note: You might have to select USB connection type before the checkbox is visible.
5. Complete the install without attaching the USB cable.
6. After the software is installed, delete any icons created on the desktop. They will not be linked to the shared printer and will only result in errors if used.
Step six: Install the shared printer.
Note: Computers that are not sharing a resource to the network may not show up by name when viewing the entire network.
Windows 7
1. Click Start.
2. Click on Computer.
3. In the lower left pane, click on Network.
4. Double click on the computer that is sharing the printer.
5. Enter the name of your share account as the “User name”.
6. Enter the same password created for the share account.
7. Check the box labeled Remember my credentials.
8. Click OK.
9. Right click on the printer, left click Open.
10. Windows will find the previously loaded driver for the printer and complete the install.
I was an HP employee.
Please mark the post that solves your problem as "Accepted Solution" -
When will there be fix for AirPrint? Since upgrading to Yosemite I cannot print from my MacBook Air which I use mostly. (I can print from the my old 2005 G5 desktop and iPad2 just fine on the same network.) I could print just fine when I had Mavericks. I have tried EVERYTHING under the sun: resetting print system, deleting and adding the printer, checking for updates, uninstalling and reinstalling printer software and folders, turning off modem, router etc. NOTHING works.
The laptop shows that it is printing but nothing happens. Then it says it cannot locate the printer or there is a broken pipe. But it does tell me that I have a low level in one of the ink cartridges (which is true.)
Help! I have warned everyone I know not to upgrade. Is there a way to go back to Mavericks?
MacBook Air (mid 2012), OS 10.10, HP Officejet 7500aThis is what appeared on Console:
11/12/14 12:42:32.558 PM com.apple.preference.printfax.remoteservice[3099]: <NSViewServiceMarshal: 0x7fa398514bd0> failed to complete rights grant 6B212CA9-7872-4726-BA05-68BD5C994479 due to 3
timestamp: 12:42:32.557 Wednesday 12 November 2014
process/thread/queue: com.apple.preference.printfax.remoteservice (3099) / 0x7fff78cb4300 / com.apple.main-thread
code: line 834 of /SourceCache/ViewBridge/ViewBridge-99/NSViewServiceMarshal.m in -[NSViewServiceMarshal invalidateWindowRights]
#exceptions
11/12/14 12:42:32.598 PM com.apple.xpc.launchd[1]: (com.apple.preference.printfax.remoteservice[3099]) Service exited due to signal: Killed: 9
11/12/14 12:42:37.845 PM com.apple.appkit.xpc.openAndSavePanelService[3298]: assertion failed: 14A389: libxpc.dylib + 97940 [9437C02E-A07B-38C8-91CB-299FAA63083D]: 0x89
11/12/14 12:42:37.879 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/CONM 136 - Study Guide Test 3 (2014).docx
11/12/14 12:42:37.971 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
11/12/14 12:42:38.033 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
11/12/14 12:42:39.712 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
11/12/14 12:42:39.000 PM kernel[0]: Sandbox: Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
11/12/14 12:42:39.748 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
11/12/14 12:42:39.850 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
11/12/14 12:42:39.874 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
11/12/14 12:42:39.945 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
11/12/14 12:42:41.000 PM kernel[0]: Sandbox: storeuid(3051) deny mach-lookup com.apple.dock.server
11/12/14 12:42:48.968 PM WindowServer[132]: WSGetSurfaceInWindow : Invalid surface 702894100 for window 1378
11/12/14 12:42:48.968 PM WindowServer[132]: WSGetSurfaceInWindow : Invalid surface 702894100 for window 1378
11/12/14 12:43:17.000 PM kernel[0]: Sandbox: storeuid(3051) deny mach-lookup com.apple.dock.server
11/12/14 12:43:23.225 PM com.apple.xpc.launchd[1]: (com.apple.quicklook[3316]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
11/12/14 12:43:24.355 PM WindowServer[132]: disable_update_timeout: UI updates were forcibly disabled by application "PrinterProxy" for over 1.00 seconds. Server has re-enabled them.
11/12/14 12:43:24.946 PM WindowServer[132]: common_reenable_update: UI updates were finally reenabled by application "PrinterProxy" after 1.59 seconds (server forcibly re-enabled them after 1.00 seconds)
11/12/14 12:43:34.503 PM mdworker[3319]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
11/12/14 12:43:34.514 PM mdworker[3320]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
11/12/14 12:43:34.604 PM mdworker[3318]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
11/12/14 12:44:38.628 PM sandboxd[246]: ([3051]) storeuid(3051) deny mach-lookup com.apple.dock.server
11/12/14 12:44:41.384 PM locationd[63]: Location icon should now be in state 'Active'
11/12/14 12:44:44.653 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
11/12/14 12:44:44.793 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
11/12/14 12:44:45.149 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
11/12/14 12:44:56.515 PM Console[3327]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
11/12/14 12:44:56.641 PM locationd[63]: Location icon should now be in state 'Inactive'
11/12/14 12:44:56.834 PM sandboxd[246]: ([3051]) storeuid(3051) deny mach-lookup com.apple.dock.server
Not sure what any of this means. -
PROBLEM: Cannot print from Photoshop
After restart error message appears:
— “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
• All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
The printer printed fine until about 2 weeks ago when this error message appeared. Printing continues from Pages, I-photo, preview etc. — only Photoshop fails.
The printer has been turned on and off, as have open documents been closed and open etc.. Preferences reset. Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
Attempting unsuccessfully to print to Epson 3880
What Adobe support will be of help.
Robert Darling — 2/19, 20, 21,22,23/2015Probably best to ask in Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll -
What other hp print drivers will work with the officejet pro 8600
I have an Officejet Pro 8600 and like many others here, I am having a problem printing a custom size envelope (6x9). I did find that I can use the drivers for a deskjet 450 and setup my 8600 using those drivers. However, the 450 6x9 does not have a portait option in the layout.
My question is, what other hp print drivers will work in the 8600? I'm hoping one will have a 6x9 portrait layout?Cheetah12 wrote:
Hello wingcheck,
Welcome to the HP Forums!
I understand you're receiving a problem printing a custom envelope size (6x9). You did state that you installed a Deskjet 450, but it doesn't come with a portrait option. I will do my best to assist you!
First, I need to find out your operating system on your computer? Windows or Mac?
If you have a Windows computer and using this Deskjet 450 driver, have you checked Devices and Printers on your computer to see if you have this portrait option:
1) Right click on the Deskjet 450, then click on Printer Preferences
2) Very top you should see a tab called "Finishing" and look for Orientation
3) You should see portrait, landscape, rotate by 180 degrees or mirror image.
4) Let me know if you don't have this option on this post
If not, then I would recommend installing a Deskjet 9800 to see if you have this option. Please follow this HP document on Installing an Alternate Print Driver in Windows 7 for a USB Cable Connection. When setting up this custom size, change the paper type to "Other Specialty Media". Please post your results, as I will be looking forward to hearing from you. Have a great night!
Hi Cheetah .... I don't have access to my printer at the moment due to travel, but here's what I have right now. My operating system is Windows 7 64. That's not much, but it is a start. I will have the additional information for you in a day or so. Something else I discovered in the user guide, which I didn't know, is that each tray will only handle specific media. So, when I print envelopes, I will have to use Tray 1 in order to do so.
Now I do have another question for you. Can I have installed, 2 different sets of print drivers at the same time without it causing a conflict? I'm assuming the diffenent driver will simply show up as a different printer in the listed printers, right?? Any way, thanks for your quick response, and upon arriving home, I will follow your previous suggestions. I will also keep you posted as to my success or failure.
Thanks
Paul -
Adobe Pdf Converter Print Driver Will not install
Acrobat V9.0
Vista Utimate Service Pack 1
I have not been able to print to the PDF Printer. I get the following error when I select the PDF printer.
"The 'Adobe PDF Converter' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
When I say yes and select version 8.5.0.0 printer since it is the latest version. I get a Add Printer Driver Wizard window that says. "Unable to install adobe pdf converter, Type 3 - User Mode, x86 driver. Access is denied.
I went through all the recommended steps on the web site listed below with no success.
Thanks in advance for you help.!!!!!!!!!!!!!!
Jim
Solution 1: Use a supported installation.
The following are unsupported installations, and the supported solutions:
If you install Acrobat (Professional or Standard) on a 64-bit operating system, then you may
see this error. Please update Acrobat to version 8.1 or later. You can update from within
Acrobat via the help pull-down menu, or download the updater from the following location:
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows.
If you install Acrobat to a shared network disk instead of a local hard disk, then the Adobe PDF
printer is not installed. Install Acrobat on a local hard disk.
TechNote Details
PRODUCTS AFFECTED:
DID THIS RESOLVE
YOUR PROBLEM?
Yes
No
300 characters
Acrobat Professional
Acrobat Standard
Acrobat 3D
TechNote
Home / Support /
Your account o Y Contact United States (Change)
Home Solutions Products Support Communities
Company Downloads Store
Error "Warning 20225..." or no Adobe PDF printer appears (Acrobat 8.0 and Acrobat 3D 8.0 on Windows)
http://kb.adobe.com/selfservice/viewContent.do?externalId=333221&sliceId=1[10/4/2008 2:04:17 PM]
If you install Acrobat to a directory with a path that contains extended ASCII or double-byte
characters, then English installations will display the error message. Install to a path that does
not contain extended ASCII or double-byte characters.
Solution 2: Ensure that the Print Spooler process is running and set to
Automatic, and then repair Acrobat.
1. Select Start > Settings > Control Panel.
2. Double-click Administrative Tools and then double-click Services.
3. Locate the service Print Spooler.
4. If the Startup Type is not Automatic, then set it to Automatic:
a. Right-click the Print Spooler.
b. Choose Properties.
c. Choose the General tab.
d. Choose Automatic in the Startup Type menu.
e. Click OK.
5. If the Print Spooler service is not running, then start it.
a. Right-click the Print Spooler line.
b. Select Start from the menu.
6. Start Acrobat, and choose Help > Detect And Repair.
Solution 3: Ensure that the Print Spooler process has no additional
dependencies.
Only the Remote Procedure Call dependency is required for Print Spooler to operate.
Additional Services can attach to the process but will interfere with restarting the service.
If the Print Spooler process has additional dependencies, then please refer to the steps
below.
To remove all services listed under "This service depends on the following system
components":
1. Choose Start > Settings > Control Panel.
2. Double-click Administrative Tools and then double-click Services.
3. Right-click Print Spooler and choose Properties.
4. Click the Dependencies tab.
5. Record services under "This service depends on the following system components" and click
OK.
Imporatnt: Remote Procedure Call is a system service and should not be removed.
6. Temporarily remove associated programs for the listed services.
7. Contact the service vendor for removal information if removal of associated software does
not remove the service.
8. Start Acrobat, and choose Help > Detect And Repair.
To disable all services listed under "The following system components depend on this
service":
1. Choose Start > SetI am having similar problems. After years of successful use, about a year ago, my printer (Epson stylus Photo R300) stopped working. After much investigation, it appears my computer no longer recognizes my printer. I've followed resets, safe boots, uninstalls, reinstalls, etc. This happened so long ago, I don't recall what I was doing when it happened. I'm figuring it happened shortly after a Software Update... So far none of the fixes recommended to me have solved the problem. I've been using Epson customer support, but they've stopped responding. None of their suggestions have seemed to work either.
Maybe you are looking for
-
? Why does my Photoshop PS2 open on my Mac Book Pro OS 10.6.8 Intel Core 2 Processor but not on my just purchased Mac Book Pro OS 10.7.3? On my new machine I get a message saying "You can't open Photoshop CS2 because Power PC applications are no lon
-
I have Windows 7 64 bit Home Premium,and I can't map a network drive. I use a Cisco VPN client to connect to my University network, and then when I go to map the drive I get a message that it can't be found. I have done web research it seems that
-
How do I move photos from iphoto to a thumbdrive
How do I move pictures from iphoto to a thumdrive. The wood worker
-
Printing withholding tax certificates for vendors
Hi all, I am printing withholding tax certificates for vendors. That time it is giving error message "Please maintain entries in layout customizing" Please give me clarification. This is very urgent Adavancely thanks Apparao
-
PMON process and ORACLE Instance - Cannot allocate log. Archival required
Hello there, We are running Oracle RAC (9i) database with two nodes and Oracle Applications 11i.The operatiing system is solaris 5.8. 1.Recently while bouncing the db, i happen to see many PMON process get started up? is it a normal thing to see thos