My playlist is not listed for device synch

I have a playlist on the left side of my iTunes schreen wil several audio items in it. However, when I click on my iPhone Sync Music section, the playlist is not listed. My other playlists are there. Any ideas why it is missing, and will not sycn with my iPhone?

Hi,
In your contacts list (Address Book) your Contacts (for iMessages) should list either and Apple ID or their Phone Number complete with international Dailling code.
In the UK I contact my iPhone by it's number that starts +44
(or I use the Apple ID I use in Messages Beta and set the Settings > Messages > Received At / Caller ID to the Apple ID)
FaceTime on the Mac (Included with Lion) works using an Apple ID
On the iPhone it tends to work with the Phone Number
9:34 PM Tuesday; May 1, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Similar Messages

G500 - Bluetooth not listed in device manager

Hi,
Bluetooth is not listed under device manager
it doesn't appear in pc settings/pc and devices neither does the bluetooth switch appears une aiplane mode
my model;
product: 20236
serial: xxxxx
thx
Moderator comment: Serial number(s) removed to protect member from mischief.

Hi guys,
I see that Shiv_K is helping you out on this
In addition.
Try to refresh the Hardware and Power.
    Remove AC and Battery
          Hold the Power Button down for at least 15 sec. Then Reconnect Everything back
Turn on the Systen and Right away start hitting F2 to load the BIOS Utility
          Inside BIOS hit F9 then Enter for Yes to load defaults
          Hit F10 to Save and Exit then Enter for YES.
now open
    Control Panel / Programs, and uninstall Lenovo Energy Management and restart the system
Then install these
Lenovo Energy Management
Intel Wifi Driver
Press Fn+F5 and see if you will be provided with this window showing the bluetooth..
Spoiler (Highlight to read)
Hope this helps,
Cheers
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Im unable to find in Apple Mobile Device USB Driver is not listed in device manager

i tried all option like uninstall my itunes and get latest and reinstall and factory reset my iphone5
but still my iphone is not reconzie under device manger , im unable find Apple Mobile Device USB Driver is not listed under device manger onmy windows7

Found a possible solution for me.
While the phone was plugged into my computer and iTunes is CLOSED.
1. I went to Services in Windows.
2. I selected Apple Mobile Device and right clicked and selected "Stop".
3. Then I right-clicked again and selected "Start".
4. Then I went to Device Manager and right clicked my iPhone with the yellow alert icon and selected "Uninstall". You will get a warning about uninstalling the device. Click OK.
5. At the top of Device Manager I clicked the Action menu and selected "Scan for Hardware Changes".
This re-installed the iPhone and everything started working again.

Material not listed for destination country

Hi Gurus,
i have an error when i create a Sales Order...
"Material TEST not listed for destination country US"
Can anyone help me to fix this error?
regards
Kumara

Hi Kumaran...
This is clearly the case of Material listing....
This is happening just because for that particular customer/Country you might have made the configuration through material determination that, he can order materials only which is listed to him.
In other words, That customer/Country can only order the materials which is in the list created by you through material determination.
If you desire to add this material to the list... go to Tcode VBO1 (its 'o1" not 'zero 1') and select the type as A001 (Listing). Just check weather the material is listed there.. if not.. add the material to the list.
Hope this help.. Reward if this is informative...
Thanks,
Safeer Rahman

G470 Bluetooth not listed under Device Manager and not working

Hi,
Can someone teach me how to solve my G470 problem?
Its Bluetooth is not listed under Device Manager and I can't find it anywhere.
Before that, it isn't working at all.
Thanks
Solved!
Go to Solution.

hi athirah11,
Welcome to the Lenovo Forums.
Can you try the following:
1. Press the Windows key‌ +R, type devmgmt.msc and press Enter. On the Device Manager, click View > Show hidden devices and check if the Bluetooth device is being listed.
- Link to picture
- Link to picture
2. If the bluetooth device shows up under the Device Manager, do the following:
a. Under Control Panel > Programs, uninstall the Bluetooth driver/software (reboot if necessary)
b. Run the Bluetooth Driver Installer
- this will identify the type of Bluetooth Device installed on the system (eg. Qualcom Atheros, Intel, etc.) and it will install a generic Bluetooth driver. If successful, the Bluetooth device and its components should now appear normally under the Device Manager.
If the bluetooth device still doesn't show up, can you provide the model number of your G470 (eg. 59xxxxxx) fur further checking.
Let me know how it goes.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

My country is Kuwait not listed for FaceTime and iMessage for activation?

my country is Kuwait not listed for FaceTime and iMessage for activation so how can i use it ??

Sorry... But... This cannot be changed
https://discussions.apple.com/message/15858866

Ipad not listed in devices, ipad not listed in devices

ipad 2 is not listed under devices in itunes. Have tried everything listed on apple help list & it stiil does not list my ipad2 under devices. Ipad makes a ping noise when i connect it to my laptop. Any suggestions?

Windows
http://support.apple.com/kb/TS1538

Attributes not listed for Adm

The issue is where the values for attributes (ex. Cost Centers) are not listed for the Administrator. The Attribute section is located in 2 sections: Manage Employee Data and Edit Attributes.
We added a note 910076 a couple of days back in DEV, which removed the Add New Line button.
Any suggestions and fix are welcome.
Points will be rewarded amfully.
Cheers,
Lokesh.

Hi Lokesh,
Check the Adm attributes in the org structure and make sure correct backend system is in the attributes.
Thank you

Ipad 3 charger problem im using the original charger and it say is not apropiet for device.this problem star today. :/

ipad 3 charger problem im using the original charger and it say is not apropiet for device.this problem star today. :/

Take it to an Apple Store for evaluation and possible replacement.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

New TMG 2010 servers are not listing for port 443

Experts,
We have installed New TMG 2010 servers are not listing for port 443, we have 2 servers installed in same subnet. server can telnet at port 443 to self but can not do to each other.
Do we need to create any access rule in TMG to allow this ?. Please help.
Anil MCC 2011,ITIL V3,MCSA 2003,MCTS 2010, My Blog : http://messagingschool.wordpress.com

Hi,
Please check the blog that lists the ports used by TMG.
Forefront TMG 2010 Protocols and Ports Reference
http://tmgblog.richardhicks.com/2012/09/10/forefront-tmg-2010-protocols-and-ports-reference/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does
not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Lotus Notes Missing in Drop Down List for Calendar Synch

Hello there,
   A) I am attempting to synch my blackberry tour with my calendar in Lotus Notes 8.5.2. I was able to previously synch my calendar when I had Lotus Notes 8.5.1, but since our upgrade to 8.5.2, I get an error saying it could not find a supported version of Lotus Notes.
B) When I try to go in and configure the organizer section of the desktop software, there is no option for the drop down list for Lotus Notes. I have tried uninstalling, rebooting and then reinstalling (based on info from other posts), but none of that seems to work. I have checked and all the connectors are there, but for some reason, they are not being recognized. Is there some specific key or file that intellisynch is looking for to know that Lotus Notes is installed on the machine?
Now, I am assuming A&B are symptoms of a common problem, but I am at a loss as to how to move forward. Any ideas on how I can get this software to recognize Lotus Notes? I appreciate any help you can give.
Thanks,
Rick

While calling method SET_TABLE_FOR_FIRST_DISPLAY pass 'A' to paramater I_SAVE .
CALL METHOD grid1->set_table_for_first_display
      EXPORTING i_structure_name = 'SFLIGHT'
                is_variant       = gs_layout
                i_save           = 'A'
                i_default        = p_def
      CHANGING it_outtab        = gt_sflight.

HT1386 Why doesn't my iphone show up when I plug it into my computer? I do not have a listing for "devices" and thus cannot backup my iphone contacts etc.

I am trying to backup my iphone contacts through itunes... Oddly, my iphone 4 is not visible under 'Devices' when I plug it into the USB port on the computer. It doesn't seem that I will be able to connect to or access or change anything unless my phone shows up as a Device in Itunes on the left side. Suggestions? I have tried two different ports and neither permits my iphone to show up as a device in itunes.
Appreciatively,
Donna

I will go back to step one on your support link that suggests checking the USB cord. or connectors I use it to charge the phone all the time but the phone does not register as a device in my computer either. I tried all four ports. Thanks. You have me off on a new path... hopefully to find a solution.

T430 NVidia GPU not listed in device manager

Hello -- I have a problem regarding the NVidia NVS 5400M inside the Thinkpad T430. I use Windows 8. I'm not exactly sure how it happened, but the NVidia card no longer shows up in Device Manager and the NVidia driver (both the standard driver from their website AND Lenovo's Optimus driver) refuses to install, complaining it can't find any compatible hardware. Device Manager does not list any graphics cards or unknown devices, and as far as Windows is concerned the NVidia card does not exist.
Here's a summary of what I see:
In Discrete Graphics mode -- my Linux installation (which uses native NVidia drivers) works fine and uses the NVidia card. Windows 8 boots and runs with a generic graphics driver; there is a performance hit, and no graphics cards or unknown devices are listed in Device Manager. That's the problem I want to fix.
In Optimus mode -- Windows 8 boots and runs with the Intel integrated graphics (Intel HD Graphics 4000) which is listed in Device Manager. Again, no other graphics cards or unknown devices are listed.
I appreciate in advance any help towards getting the NVidia drivers installed successfully!
Solved!
Go to Solution.

nsrathjen wrote:
Yep, still doesn't appear that the NVidia drivers from that package are installing. If I boot in Optimus mode, only the Intel card is shown in Device Manager. I'd like to not have to use Optimus and just stay in Discrete Graphics mode if possible because Linux support for Optimus is not very good.
Would completely uninstalling all the drivers possibly help?
Before you go through that hassle, try the following:
1. Go into the BIOS Configuration Display setting and change it to Discrete only. If you see a setting just below display that talks about OS detection, disable that as well otherwise it will try to flip back to Optimus. F10 to save and exit.
2. Go back into the BIOS settings and verify the setting was really saved. Exit the BIOS settings (discarding this time) and boot Windows normally.
3. Go to C:\DRIVERS\WIN\VIDEO\NVIDIA and run setup.exe. Use the Custom option for the mode after it does compat checks and asks for you to agree to the EULA.
4. When you see the list of custom installation options, turn on the "Perform a clean installation" checkbox. This should not present a problem if you don't have custom profiles.
See if that works.

Iphone not listed as device

My ipad2 and iphone 4 are listed as devices even when they are not plugged into my macbook in itunes and can be synced remotely. I cannot seem to figure out why my iphone 5 will not show up the same way. It works fine when it is connected via USB. Any help would be appreciates!

To enable Wi-Fi synching, connect the phone to iTunes and click "Sync this iPhone over Wi-Fi" on the computer.

Profile value per_person_id is not listed for $PROFILE$ block

Hi All,
I have reqirement to retrive the person_id to default Employee number in Personal analysis descriptive flex filed segment.
When i tried using $PROFILES$.PER_PERSON_ID or fnd_profile.value('PER_PERSON_ID') is not working for me.
Then i have checked the profile value list using "diagnostic-->examin" option in the application where i am not able to find the Per_person_id in the list.
Note: We are using the Oracle Applications : 11.5.9
Is there any way to meet my reqirement?
Appriciate your contribution towards this issue.
Thanks in advance.
Kumar
Edited by: Kumar Kasinathan on 04-Jul-2012 00:07
Edited by: Kumar Kasinathan on 04-Jul-2012 00:14
Edited by: Kumar Kasinathan on 04-Jul-2012 00:16

Hi, I need to attach a value set to attribute12 which should not be the employee number, attribute12 of per_all_people_f and employee_number of a custom table and the number for the attribute12 should be the unique value.
The steps i have followed
1. created a table file_number to hold the numbers from 0000001....to...9999999
2. created a view-file_number_v to have unique numbers as
SELECT fn.file_number
FROM file_number fn
WHERE NOT EXISTS (SELECT 1
FROM per_all_people_f pap1
WHERE pap1.employee_number = fn.file_number)
AND NOT EXISTS (SELECT 1
FROM per_all_people_f pap2
WHERE pap2.attribute12 = fn.file_number)
AND NOT EXISTS (SELECT 1
FROM table1 t1
WHERE t1.employee_number = fn.file_number)
3. Created a table validated value set based on the above view and attached it to the Attribute12 of the DFF
Its worked fine for new inputs, but when ever i try to requery the employee,hence the number is inserted in the attribute12 column of per_all_people_f table the value set validates and provides error message.
To avoid this i have used the following temp table query,
(select file_number fn from file_number_v
union all
select attribute12 fn from per_all_people_f where attribute12 = :PERSON.ATTRIBUTE12:NULL) temp
I have used the above query as table in the valueset.
Now i have to get the person_id to use it on the above query to avoid the issue which i have mentioned in previous discussion.

My playlist is not listed for device synch

Similar Messages

Maybe you are looking for