My .PNGs are tweaking out when i lower their quality!  Somebody, help meeee!

Hello.
So I've got animated pngs.  They're in symbols that aniamate.
When I go to Publish Settings and lower the JPG quality.  (it's curretnly at 100% which is TRULY regret.  I think I may be stuck here.. I should have left it at flashs default 80%)
The animated pngs glitch out.  Some are invisible for ever, and some cycle back and forth.  Visible, not visible, etc.etc.!
Help meeeee!
Using CS4.
I think I may have to manually do each one.  Manually adjust the static pngs.  But what about the animated ones?
T_T

Loooool.
Do you know how absuuurd that sounds?
haha, but I will try it. 
Okay, so what order should i do it?
Set the publish setting to 80% and THEEEN go in ......the....100's of movie clips...one by one.?
Do i have to do it all in one sitting?what if i export and i forgot like 40 of them, do i have to START ALL OVER?
Thanks dude, nice tip, hahah

Similar Messages

  • I connected my brand new iPod Classic 160 GB to my brand new Sony home entertainment system through the headphone jack (to the audio line in). The volume is ridiculously low. Can somebody help me out here?

    I connected my brand new iPod Classic 160 GB to my brand new Sony home entertainment system through the headphone jack (to the audio line in). The volume is ridiculously low. Can somebody help me out here?

    Make sure the volume on the iPod is turned up fully, since this will affect what you hear through the stereo.
    Make sure Volume Limit is set to full. (From Main Menu, Settings/Volume Limit)
    If you purchased your iPod inside the EU (European Union), then the maximum volume from the headphone jack is lower than elsewhere in the world. If this is the case, buy yourself a 30-pin Dock Connector to 3.5mm jack lead, such as the one linked here...
    http://www.amazon.co.uk/Decrescent-Connector-Stereo-Auxiliary-iPhone/dp/B007NIE5 EE/ref=sr_1_1?ie=UTF8&qid=1386012456&sr=8-1&keywords=30+pin+to+3.5mm
    That connector will take a higher volume out (than the European Union's output) and that will be louder (and hopefully loud enough) through your stereo.

  • Apps are greyed out when syncing

    When syncing my son's iPod, the apps on the computer screen are greyed out.  The check mark is there, but it is greyed out as well so I am not able to select or deselect apps.  What it this and how do I fix it?

    I solved it.  The restrictions were disabled so I enabled them.  The grey immediately went away.  Then after syncing I disabled them again so the little one can't download apps.
    Thanks anyway

  • .jpg files are greyed out when I try and upload to website

    I used Image Capture to scan documents in order to upload to a website.  When I go to select the .jpg files they are greyed out.  Any suggestions?

    Did you do a restore from iTune or iCloud backup recently?

  • QTs are washed out when rendered.

    HI there
    I'm rendering out through AE (v12) and through numerous codecs - animation,H264, ApplePro, tiffs, etc.... - and all QTs look washed out when compared to the AE project. Does anyone have a solution or know the cause of this? (OSX 10.8.4 & GeForce GT650M)
    Any help appreciated.
    E

    Tiffs and Targa sequences still seem to drop less so.
    When importing the rendered QTs back into AE they appear less washed out/desaturated within the viewer than they do with the QT player. Obviously one or the other is causing the main problem, but both seem to be playing a part.

  • Some of the extensions I am using are greyed out when I attempt to make their tool bar viewable

    There are several extensions I have installed from the Safari extension gallery. Two of them are the twitter extension and the Gtool Bar. I would like their tool bars to be viewable but they are greyed out under the View menu option. Any reasons why this is and what can I do?

    Definitely contact the developers but you can also try deleting the Extensions.plist
    Go to  ~/Library/Safari/Extensions
    Move the Extensions.plist file from the Extensions folder to the Trash.
    Quit then relaunch Safari to test.

  • Transferred itunes library from Windows XP PC to new Windows 7 PC. plugged in 3rd gen Ipod. Ipod icon appears along with playlists, music etc. Songs are grayed out and won't play. Please help!

    I recently transferred itunes library from windows XP PC to new Windows 7 PC. The transfer was successful, however when I plug my 3rd gen Ipod Nano into the new PC, the Ipod icon appears along with the music, playlists, etc. The songs are shown but are 'grayed out' and wont play or sync.The 'Devices & Printers' window in new PC shows icon for Ipod driver & is OK. The icon for the Ipod appears but depicts a delta shaped warning icon that states that the Ipod is'not operating properly'. Tried troubleshooting. The troubleshooting message states the the Ipod is 'disconnecting'. Can you help me with this problem?        

    Then, I dropped the entire itunes file from the old PC (XP) into an empty external drive.
    That "itunes file from the old PC"?  Is that the iTunes folder, from the old PC, that was in the user home folder's Music folder?
    All of the library, playlists, etc. from the ipod as they always have been are shown, by they are 'grayed out' and will not open or play.
    That's on the iPod, correct?  Are all of your old playlists in iTunes, from the old PC, still there in iTunes on the new PC?  Are the songs in iTunes still playable?
    This document provides the steps to transfer a complete iTunes library between two computers.  See the section called External drive.
    iTunes: How to move your music to a new computer - Apple Support
    There are many steps, but this is a summary.  (1) On the old PC, consolidate all of your iTunes data into the iTunes folder.  (2) Copy this iTunes folder to the external drive.  (3) On the new PC (that has iTunes installed but NOT running), replace its existing iTunes folder with the one from the old PC (on the external drive).  When you run iTunes, it uses the iTunes folder from the old PC, and it should look like iTunes on the old PC (with all the playlists, ratings, play count, etc.), and your iPod will see the iTunes library as the same iTunes library (because it is the same library).
    If you did something different, and the old PC is still accessible, you may want to try it using the method from the linked document.

  • Changes are not reflected when objects transported from Quality to Productn

    Hi
    In case of moving some Transport requests from Quality to Production, some times the changes made to the selection screen of a report program doesn't reflect in Production. Also we don't see any Transport error while transporting. Moreover, we can see the changes by regenerating the Program in production.
    Would any one help me out in this with the reason for this.
    Pls suggest what needs to be done.
    Satish.

    HI,
    Thanks for the reply.
    - I have checked the respective transport too, and every thing seems to be fine.
    - Recently we went to go live, for the next release, so earlier before go live, we didnt faced any proble.. Only now we are facing this problem, that we find the changes relating to selection screen are not reflected when the object / prog is moved from qty to Prd.
    - Only problem is with the selection screen.(not getting reflected in PRD. In Qty we are able to see those changes.
    - Then in order to reflect these changes in PRD, we have to re generate the object, then only it get s updated..
    Satish.
    Edited by: satish c on Sep 22, 2009 3:35 PM

  • Last two characters are cut out when entering data in a text form

    Whenever I try leaving a comment on a page, it always cuts out the last two characters, and replaces them with "Pr". This happens across multiple browsers, (Chrome, FF, and Camino), but not Safari.
    In addition, if a '<' character was put in, it'll cut out the last two characters in its code, and replace them with Pr again, leaving %Pr.
    This happens on a mac (I'm posting for my friend who I talk to all the time).

    We did end up checking keyboard related settings in her Mac Preferences, but there wasn't anything related. I will end up trying Apple's forums if no one here can help. Anyways the "Pr" I believe might've come from the source code, as there is "editProfile" in the page. I don't really do web development, so I'd have no idea here. This is the page's source from around that area btw (I had to convert them to all HTML character codes because it kept parsing it):
    &#60;&#100;&#105;&#118;&#32;&#99;&#108;&#97;&#115;&#115;&#61;&#34;&#99;&#108;&#70;&#108;&#111;&#97;&#116;&#34;&#62;&#60;&#47;&#100;&#105;&#118;&#62;&#60;&#47;&#100;&#105;&#118;&#62;&#60;&#47;&#100;&#105;&#118;&#62;&#60;&#100;&#105;&#118;&#32;&#99;&#108;&#97;&#115;&#115;&#61;&#34;&#104;&#111;&#114;&#105;&#122;&#76;&#105;&#110;&#101;&#34;&#62;&#60;&#104;&#114;&#47;&#62;&#60;&#47;&#100;&#105;&#118;&#62;&#60;&#100;&#105;&#118;&#32;
    &#99;&#108;&#97;&#115;&#115;&#61;&#34;&#100;&#97;&#116;&#97;&#83;&#101;&#99;&#116;&#105;&#111;&#110;&#34;&#62;&#60;&#97;&#32;&#99;&#108;&#97;&#115;&#115;&#61;&#34;&#114;&#116;&#34;&#32;&#105;&#100;&#61;&#34;&#97;&#100;&#100;&#99;&#109;&#116;&#108;&#110;&#107;&#34;&#32;
    &#104;&#114;&#101;&#102;&#61;&#34;&#106;&#97;&#118;&#97;&#115;&#99;&#114;&#105;&#112;&#116;&#58;&#118;&#111;&#105;&#100;&#40;&#48;&#41;&#59;&#34;&#62;&#65;&#100;&#100;&#32;&#67;&#111;&#109;&#109;&#101;&#110;&#116;&#60;&#47;&#97;&#62;&#60;&#108;&#97;&#98;&#101;&#108;&#62;&#67;&#111;&#109;&#109;&#101;&#110;&#116;&#115;&#60;&#47;&#108;&#97;&#98;&#101;&#108;&#62;&#60;&#100;&#105;&#118;&#32;&#105;&#100;&#61;&#34;&#112;&#111;&#115;&#116;&#99;&#109;&#116;&#34;&#32;
    &#99;&#108;&#97;&#115;&#115;&#61;&#34;&#100;&#97;&#116;&#97;&#70;&#114;&#97;&#109;&#101;&#72;&#76;&#70;&#66;&#32;&#104;&#105;&#100;&#100;&#101;&#110;&#34;&#62;&#60;&#100;&#105;&#118;&#32;&#99;&#108;&#97;&#115;&#115;&#61;&#34;&#117;&#115;&#101;&#114;&#69;&#110;&#116;&#114;&#121;&#34;&#62;&#60;&#100;&#105;&#118;&#32;
    &#99;&#108;&#97;&#115;&#115;&#61;&#34;&#101;&#100;&#105;&#116;&#80;&#114;&#111;&#102;&#105;&#108;&#101;&#34;&#62;&#60;&#102;&#111;&#114;&#109;&#32;&#97;&#106;&#97;&#120;&#105;&#102;&#121;&#61;&#34;&#49;&#34;&#32;&#97;&#99;&#116;&#105;&#111;&#110;&#61;&#34;&#104;&#116;&#116;&#112;&#58;&#47;&#47;&#119;&#119;&#119;&#46;&#111;&#110;&#118;&#101;&#114;&#115;&#101;&#46;&#99;&#111;&#109;&#47;&#112;&#114;&#111;&#102;&#105;&#108;&#101;&#47;&#97;&#106;&#97;&#120;&#47;&#99;&#111;&#109;&#109;&#101;&#110;&#116;&#115;&#47;&#97;&#100;&#100;&#46;&#112;&#104;&#112;&#34;&#32;
    &#109;&#101;&#116;&#104;&#111;&#100;&#61;&#34;&#80;&#79;&#83;&#84;&#34;&#62;&#60;&#105;&#110;&#112;&#117;&#116;&#32;&#110;&#97;&#109;&#101;&#61;&#34;&#116;&#111;&#105;&#100;&#34;&#32;&#116;&#121;&#112;&#101;&#61;&#34;&#104;&#105;&#100;&#100;&#101;&#110;&#34;&#32;
    &#118;&#97;&#108;&#117;&#101;&#61;&#34;&#55;&#48;&#57;&#56;&#49;&#34;&#32;&#47;&#62;&#60;&#116;&#97;&#98;&#108;&#101;&#32;&#99;&#108;&#97;&#115;&#115;&#61;&#34;&#102;&#114;&#97;&#109;&#101;&#34;&#32;
    &#99;&#101;&#108;&#108;&#115;&#112;&#97;&#99;&#105;&#110;&#103;&#61;&#34;&#48;&#34;&#62;&#60;&#116;&#114;&#62;&#60;&#116;&#100;&#32;&#99;&#108;&#97;&#115;&#115;&#61;&#34;&#105;&#109;&#97;&#103;&#101;&#67;&#101;&#108;&#108;&#34;&#62;&#60;&#100;&#105;&#118;&#32;&#99;&#108;&#97;&#115;&#115;&#61;&#34;&#115;&#109;&#97;&#108;&#108;&#73;&#109;&#103;&#70;&#114;&#97;&#109;&#101;&#34;&#62;&#60;&#97;&#32;
    &#104;&#114;&#101;&#102;&#61;&#34;&#104;&#116;&#116;&#112;&#58;&#47;&#47;&#119;&#119;&#119;&#46;&#111;&#110;&#118;&#101;&#114;&#115;&#101;&#46;&#99;&#111;&#109;&#47;&#112;&#114;&#111;&#102;&#105;&#108;&#101;&#47;&#112;&#114;&#111;&#102;&#105;&#108;&#101;&#46;&#112;&#104;&#112;&#63;&#105;&#100;&#61;&#53;&#52;&#49;&#52;&#34;&#62;&#60;&#105;&#109;&#103;&#32;&#115;&#114;&#99;&#61;&#34;&#104;&#116;&#116;&#112;&#58;&#47;&#47;&#112;&#104;&#111;&#116;&#111;&#115;&#46;&#111;&#110;&#118;&#101;&#114;&#115;&#101;&#46;&#99;&#111;&#109;&#47;&#112;&#104;&#111;&#116;&#111;&#46;&#112;&#104;&#112;&#63;&#115;&#105;&#122;&#101;&#61;&#50;&#38;&#97;&#109;&#112;&#59;&#112;&#114;&#111;&#102;&#105;&#108;&#101;&#61;&#53;&#52;&#49;&#52;&#34;&#32;&#97;&#108;&#116;&#61;&#34;&#80;&#108;&#117;&#116;&#111;&#32;
    &#105;&#115;&#32;&#97;&#32;&#80;&#108;&#97;&#110;&#101;&#116;&#34;&#32;
    &#116;&#105;&#116;&#108;&#101;&#61;&#34;&#80;&#108;&#117;&#116;&#111;&#32;&#105;&#115;&#32;&#97;&#32;
    &#80;&#108;&#97;&#110;&#101;&#116;&#34;&#32;&#47;&#62;&#60;&#47;&#97;&#62;&#60;&#47;&#100;&#105;&#118;&#62;&#60;&#47;&#116;&#100;&#62;&#60;&#116;&#100;&#32;&#99;&#108;&#97;&#115;&#115;&#61;&#34;&#99;&#111;&#109;&#109;&#101;&#110;&#116;&#67;&#101;&#108;&#108;&#34;&#62;&#60;&#112;&#62;&#60;&#97;&#32;
    &#99;&#108;&#97;&#115;&#115;&#61;&#34;&#117;&#115;&#101;&#114;&#34;&#32;&#104;&#114;&#101;&#102;&#61;&#34;&#104;&#116;&#116;&#112;&#58;&#47;&#47;&#119;&#119;&#119;&#46;&#111;&#110;&#118;&#101;&#114;&#115;&#101;&#46;&#99;&#111;&#109;&#47;&#112;&#114;&#111;&#102;&#105;&#108;&#101;&#47;&#112;&#114;&#111;&#102;&#105;&#108;&#101;&#46;&#112;&#104;&#112;&#63;&#105;&#100;&#61;&#53;&#52;&#49;&#52;&#34;&#62;&#80;&#108;&#117;&#116;&#111;&#32;&#105;&#115;&#32;
    &#97;&#32;&#80;&#108;&#97;&#110;&#101;&#116;&#60;&#47;&#97;&#62;&#60;&#47;&#112;&#62;&#60;&#100;&#105;&#118;&#32;&#99;&#108;&#97;&#115;&#115;&#61;&#34;&#101;&#100;&#105;&#116;&#70;&#114;&#97;&#109;&#101;&#34;&#62;&#60;&#116;&#101;&#120;&#116;&#97;&#114;&#101;&#97;&#32;
    &#110;&#97;&#109;&#101;&#61;&#34;&#116;&#101;&#120;&#116;&#34;&#62;&#60;&#47;&#116;&#101;&#120;&#116;&#97;&#114;&#101;&#97;&#62;&#60;&#47;&#100;&#105;&#118;&#62;&#60;&#100;&#105;&#118;&#32;&#99;&#108;&#97;&#115;&#115;&#61;&#34;&#115;&#117;&#98;&#109;&#105;&#116;&#34;&#62;&#60;&#73;&#78;&#80;&#85;&#84;&#32;&#116;&#121;&#112;&#101;&#61;&#34;&#115;&#117;&#98;&#109;&#105;&#116;&#34;&#32;
    &#118;&#97;&#108;&#117;&#101;&#61;&#34;&#80;&#111;&#115;&#116;&#32;&#67;&#111;&#109;&#109;&#101;&#110;&#116;&#34;&#32;&#47;&#62;&#60;&#47;&#100;&#105;&#118;&#62;&#60;&#47;&#116;&#100;&#62;&#60;&#47;&#116;&#114;&#62;&#60;&#47;&#116;&#97;&#98;&#108;&#101;&#62;&#60;&#47;&#102;&#111;&#114;&#109;&#62;&#60;&#47;&#100;&#105;&#118;&#62;&#60;&#47;&#100;&#105;&#118;&#62;&#60;&#47;&#100;&#105;&#118;&#62;&#60;&#100;&#105;&#118;&#32;
    &#105;&#100;&#61;&#34;&#109;&#111;&#114;&#101;&#68;&#114;&#111;&#112;&#71;&#114;&#111;&#117;&#112;&#95;&#108;&#100;&#116;&#34;&#32;&#99;&#108;&#97;&#115;&#115;&#61;&#34;&#104;&#105;&#100;&#100;&#101;&#110;&#34;&#62;&#60;&#105;&#109;&#103;&#32;&#115;&#114;&#99;&#61;&#34;&#104;&#116;&#116;&#112;&#58;&#47;&#47;&#115;&#116;&#97;&#116;&#105;&#99;&#100;&#97;&#116;&#97;&#46;&#111;&#118;&#115;&#116;&#97;&#116;&#105;&#99;&#46;&#99;&#111;&#109;&#47;&#105;&#109;&#103;&#47;&#98;&#97;&#114;&#95;&#108;&#111;&#97;&#100;&#105;&#110;&#103;&#46;&#103;&#105;&#102;&#34;&#32;
    &#97;&#108;&#116;&#61;&#34;&#34;&#47;&#62;&#60;&#47;&#100;&#105;&#118;&#62;&#60;&#100;&#105;&#118;&#32;&#105;&#100;&#61;&#34;&#109;&#111;&#114;&#101;&#68;&#114;&#111;&#112;&#71;&#114;&#111;&#117;&#112;&#34;&#62;&#60;&#115;&#99;&#114;&#105;&#112;&#116;&#32;&#116;&#121;&#112;&#101;&#61;&#34;&#116;&#101;&#120;&#116;&#47;&#106;&#97;&#118;&#97;&#115;&#99;&#114;&#105;&#112;&#116;&#34;&#62;&#10;
    And this is what it looked like to me: http://img442.imageshack.us/img442/5656/97668645.png
    Thanks for your reply, I appreciate it!

  • Table sizes are stretched out when opened in any browser except explorer

    I am working on a site and pretty much have everything lined
    out and loads the table dimensions and everything else just the
    same as it is created in dreamweaver. The problem that I am having
    is that when the site is opened in any other browser the tables are
    off or spread out of position. Is there something that i can do to
    change this so the site is uniform to more browsers than just
    Explorer? the site is www.greendiamond.mygoldenopportunity.com
    which is a test site that i am using to prepare this site. Could
    there be a problem with the host as well?
    i have seen other posts that are similar but it is still
    unclear about how to fix this problem

    i didnt seem to mention that the problem lies in my abrasive
    and foundry pages under the product menu. its mainly dealing with
    the table that the main text is in. its hieght is stretched out
    giving too much white space when viewed in netscape, or firefox.
    but it still looks good in explorer.

  • All files on new iPod are grayed out when connected and viewed in iTune 7.6

    I just bought a new 80GB iPod classic. I have been able to get everything loaded and it works fine (I have to get used to the new interface but that's OK). What is odd is that when I click on "music" on the now fully loaded iPod contents list of some 1,500 songs, all of then a grayed out and I cannot do any sort of renaming/re-arranging/deletion whatsoever. No doubt this is a simple setting that I am just not hip to. It did ask me to update to iPod software 1.1.1 when I put it in and I did.
    Any advice/help would be greatly appreciated.
    thanks
    Theo

    Sounds like your iPod is in auto-sync mode, which greys out the contents and won't let you change things. That's normal since you're expected to make such changes to your iTunes library and re-sync your iPod to capture the changes.
    If you want to manage the contents directly on the iPod, you need to select the option "Manually manage music and video", found on the general iPod summary when you connect to iTunes.

  • Images are blanked out when forwarding a message....any fix?

    When I forward a message with Thunderbird 3.0.6, the images are blank with a red icon in the top left corner. The message is being sent as HTML and Text.

    Thunderbird support is over here.
    [http://www.mozillamessaging.com/en-US/support/]
    or here:
    http://forums.mozillazine.org/viewforum.php?f=39

  • Ive used Youtube Converters to download my music, but since ive updated to IOS 7.3 the songs i download, play on my itunes but are greyed out when i try to sync them to my iphone 5? HELP !!

    Ive used youtube converters for ages now, but since i did the last update, its just not working? This hasnt happened before with any of the other updates? Ive tried deleting them and redownloading them, using different MP3 converters, they've all worked before but for some reason, itunes are not accepting them ?! Please help, i cant tell you how much its getting on my nerves !
    If someone could help me out asap, id be more than appriciative !
    Thank you xo

    On your iPad tap Settings > Store
    Switch Books off then back on then reset your iPad.
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.

  • Administrator settings are wiped out when called for Sysprep

    Hi All,
    I follow the below steps to imply sysprep on a clean PC with Windows 7 installed,
    1. Install windows 7 Ultimate,
    2. Install driver softwares as required
    3. Configure static IP
    4. Configure user settings including administrator.  Like Administrator will have the "Show hidden files" and some shortcuts available only for Administrator, and "Open each folder in its own window" option enabled.
    5. My Answer file is as below
    <?xml version="1.0" encoding="utf-8"?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
        <settings pass="specialize">
            <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <AutoLogon>
                    <Enabled>false</Enabled>
                    <LogonCount>5</LogonCount>
                    <Username>Administrator</Username>
                </AutoLogon>
                <ComputerName>CAPTURE01</ComputerName>
                <CopyProfile>false</CopyProfile>
                <RegisteredOrganization>CarlZeiss</RegisteredOrganization>
                <RegisteredOwner>CarlZeiss</RegisteredOwner>
            </component>
            <component name="Microsoft-Windows-Deployment" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <RunSynchronous>
                    <RunSynchronousCommand wcm:action="add">
                        <Order>1</Order>
                        <Path>net user Administrator /active:yes</Path>
                    </RunSynchronousCommand>
                </RunSynchronous>
            </component>
        </settings>
        <settings pass="oobeSystem">
            <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <RegisteredOrganization>CarlZeiss</RegisteredOrganization>
                <RegisteredOwner>CarlZeiss</RegisteredOwner>
                <OOBE>
                    <HideEULAPage>true</HideEULAPage>
                    <HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
                    <NetworkLocation>Work</NetworkLocation>
                    <SkipUserOOBE>true</SkipUserOOBE>
                    <SkipMachineOOBE>true</SkipMachineOOBE>
                </OOBE>
            </component>
        </settings>
        <settings pass="auditSystem">
            <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <UserAccounts>
                    <AdministratorPassword>
                        <Value>YgBlAGwAdQBnAGEAQQBkAG0AaQBuAGkAcwB0AHIAYQB0AG8AcgBQAGEAcwBzAHcAbwByAGQA</Value>
                        <PlainText>false</PlainText>
                    </AdministratorPassword>
                </UserAccounts>
            </component>
        </settings>
        <settings pass="auditUser">
            <component name="Microsoft-Windows-Deployment" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <RunSynchronous>
                    <RunSynchronousCommand wcm:action="add">
                        <Order>1</Order>
                        <Path>net user Administrator /active:yes</Path>
                    </RunSynchronousCommand>
                </RunSynchronous>
            </component>
        </settings>
        <settings pass="windowsPE">
            <component name="Microsoft-Windows-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <Display>
                    <HorizontalResolution>1280</HorizontalResolution>
                    <VerticalResolution>720</VerticalResolution>
                </Display>
            </component>
        </settings>
        <cpi:offlineImage cpi:source="wim:e:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
    </unattend>
    6. In audit mode, I pass the unattend.xml so called the Answerfile to sysprep as follows
    sysprep /oobe /generalize /unattend:unattend.xml
    7. The system shutsdown after applying the sysprep.
    8. When the system is started, all things are fine, the administrator account is also enabled but, when logged into administrator account, the system shows "Preparing your desktop" and resets all the shortcuts and user settings like "show
    hidden files" and "Open folder in its own window" are reset backup to windows default.
    Can any one guide me to retain these user settings for administrator profile.
    Regards,
    Arun
    programmer vc++

    Hello,
    You can only have one default profile. We use network share profile that is trimmed only to hold basic setup that all clients must have.
    If you are in a domain you can put the admins in their own OU:s (with "Active Directory - Users & Computers") and link the right Group Policy settings to the right OU-container. This is also a good way to do this because if the users computer changes
    the policy settings will apply automatically based on user account. Also if the admin needs to access users computer the correct group policy will make every fresh login set the folder settings etc. to right position.
    Folder Options - control panel config via Group Policy
    http://technet.microsoft.com/en-us/library/cc771379.aspx
    If you want to you can also link the Group Policy based on the security group of the user. That way for example when a user is added the the administrators group he will automatically get the right group policy containing the right settings.
    http://technet.microsoft.com/en-us/library/cc752992.aspx

  • I am showing 9 tabs open and I cannot access other websites (they are grayed out when I clock on them).  How do I close tabs?

    I was working on calendar and opened too many tabs.  I am showing 9 tabs open and it affects other sebsites I am now trying to access.  The webpage is grayed out and non-accessible.  I do not need all the tabs.  How do I close them?

    Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Maybe you are looking for

  • The Sirus-XM APP

    I  m a Sirius/XM subscriber. I got a full year for $20.00 when I bought my car. The trouble is the quality of the satelite section of the   radio that came with my '08 PT Cruiser is only so so. I use my Droid X in Moto's car dock daily and play music

  • BO 6.5 : save as excel (problem date)

    hi, i've a query result in BO with a date "31/12/2099". This date come from an oracle db file. I save it into xls (save as) but the result in xls give me "30/12/1900". It is the same for date greater than 31/12/2099. for date < 1900 the result is 01/

  • I lost my photo stream how do I get it back

    MY photo stream is gone how do i get it back

  • JB0:30004 and JB0:28006 errors in production

    Hi all, Working in JDEV 11.1.1.2.0. and i getting the JB0:30004 and JB0:28006 in production environment. it try to search in google and forum i didn't get the exact solution for this can any one help me. I am not using releaseApplicationModule/create

  • MRP Controller changes in Planned order

    Hi Gurus, If anyway possible to change MRP controller in Planned order. I tried to change in MD12 but it's shows only display mode. Any answer? Thanks, B.Deethya