My podcasts stop auto updating

They stop automatically updating when I haven't listened to one in a while. It's annoying because sometimes there's reasons I haven't listened to one in a while but I still want it updated.
But iTunes insists on stopping updates if I haven't listened to one in a while.
I haven't found anything in preferences that lets me change this either. Anyone have a solution?

This has always been annoying.  At least now it tells you it has stopped updating. In left column next to name it put exclamation point next to a couple podcasts in list. When I clickon on it to see what it was I got a message asking if I wanted to continue.

Similar Messages

  • Stop auto updating of extension

    I use the extension 'Tab Mix Plus' When they went to version 4.0.X , one of the functions was discontinued. I contacted them and they say there will be no change. I load an earlier version, but periodically it auto updates. I can reload it but this repeats. I have check the box for 'Check for updates, but let me choose...', but this does not work for updates of addons. Is there a manual way in 'about:config' that I can stop the auto update.

    you can disable auto-updates for a individual extension in the add-on manager by right-clicking it, then go to show more information & select "automatic updates: off"

  • Stop auto updating

    how can I stop Fire Fox 11 from auto update to FF14 ?I need FF11 and no higher for the version of Facebook i'm using

    Change your update preference from automatic to notification. See this article:
    https://support.mozilla.org/en-US/kb/update-firefox-latest-version#w_how-do-i-configure-update-32optionssf33preferencessf
    By the way, after each update Mozilla publishes the security vulnerabilities in the previous release, so running old versions does expose you to potential exploits. I have no idea why you can't run Firefox 14 on your version of Facebook (???), but you will have to decide what level of risk to run. Good system backups are advisable.

  • How stop auto update before you insert the ipod

    This seems to be a real quandary. sometimes you want to insert your ipod without the whole updating thing taking over you ipod. but I don't think you can change that setting unless the ipod in plugged into computer, and if setting is auto update it just starts. any ideas appreciated. thanks.

    thanks Niel, but before I proceed, what exactly happens when you do that, does the ipod not do the auto update? and you can access or update manually?
    also, anyway to stop the updating once it starts? thanks

  • TS3147 How do I stop auto updates for an HP printer I no longer have?

    I keep getting auto update notices for a printer I have discarded.  How do I stop this?  Within the last year my "HP" printer quit and I replaced it with a "Brother" printer.  It is annoying to keep getting the HP irrelevant update notifications.  I removed the HP printer info in the application folder on my hard drive, but that did not help.

    I use Find File myself.  I think it has been discontinued.

  • How do I stop auto update of date/time

    Hi,
    I'm starting to despair, a while ago I stupidly clicked on auto update/time on a letter I was working on, it seemed like a good idea at the time. But now whenever I open any letter the date is automatically updated which is a major problem as I am losing the references to when I actually wrote and therefore sent these letters. I'm too scared to open letters now because I'll lose this important piece of information.
    Any help appreciated!
    Thanks
    Nathalie

    Next time, don't use the Pages 's insert date_time feature.
    Use the one delivered in the free WordService from Devon Technologies.
    It always inserts a fixed date_time.
    But I have wondering about your problem.
    The Pages User Guide states:
    • To add and format the date and time, place the insertion point where you want the value to appear, and then choose Insert > Date & Time.
    To change the date and time format, Control-click the date and time value, choose Edit Date & Time, and then choose a date and time format from the pop-up menu. *If you want the document to always show the current date and time, select “Automatically update on open.”*
    Which, if I understand well means that the default setting is that the inserted date_time is a frozen (fixed) one.
    Yvan KOENIG (VALLAURIS, France) mardi 30 mars 2010 16:29:17

  • Can't Stop Auto-Update

    When I connect my BB Bold and startDesktop Manager, it automatically launches into auto-update: "Checking for device application updates...". If I click on "Cancel", it ignores me, but it doesn't hang. It eventually comes up with the message: "Updated versions... are available.. Blackberry 4.6 Core Applications". I am using 4.7 - So that doesn't make sense.
    I have tried to disable Auto-Update by clicking on "Check for Updates" and un-checking "Check for Updates automatically". But that makes no difference. I have looked for and renamed Vendor.xml (per some suggestions) but cannot find a Web.xml file. Renaming Vendor.xml to _Vendor.xml (so I can undo the change) makes no difference.
    Any more suggestions?
    Sean

    First off, your device does use the 4.6 software, even if the version of BlackBerry Desktop Manager is 4.7.  There is no 4.7 OS for the Bold.
    Second, the reason you're seeing this message is likely because you have the device software installed on your computer.  Go to your computer's Control Panel, then Uninstall Programs (in Vista, it's under Programs & Features in Classic View).  Remove any BlackBerry Device software you see (not the Desktop Manager, just the device software).  Once this is done, restart your computer.
    This should resolve the issue. 
    If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
    If your issue is resolved, don't forget to click the Solution button on the resolution!

  • Stop auto update

    This topic was deleted last time I asked the question because the gods moderators decided it wasn't a question.
    How do I disable automatic update of iTunes? Again, last time I posted people flat out denied that what I said had happened had actually happened. But I am not making this up and it has occured twice recently. I open iTunes and it has updated itself. I did not do anything to prompt this or even consent to this update. Yet when I opened iTunes today it had a new interface and forced me to either agree to the dictator's Apple's terms or not use iTunes at all and render my iPad, iPod Nano, and iPhone useless.
    I veriified in iTunes preferences that "check for new software updates automatically" is not checked. Every single time that Apple software updater pops up on my Windows 7 computer I uncheck al the selections and click quit.
    Yet it seems there's no escaping. When Apple decides I should be running another version of iTunes, apparently I have no choice in the matter, being a mere user who has been granted a license to use this technology on Apple's terms or not at all.

    When I clicked on Help | About iTunes it says version 11.1.3.8.
    All I know is that when I opened iTunes this morning, the interface was completely different than last night, and I was forced to either click "agree" to Apple's license agrreement or the program would close.
    It sounds like an update to me.
    It was much smoother than the last involuntary update when the program complained that my database was corrupted and I lost some (legitimately purchased) content. But that's neither here nor there. I just want to stop these imposed interface changes.

  • IPod shuffle= no pref. to stop auto update/sync with itunes 7

    If you have an ipod shuffle and you plug it in to your laptop, with your itunes library located on an external drive, itunes 7 will automatically sync the shuffle with itunes 7 and if the ext. drive is disconnected, subsequently erase all songs on the ipod, because it cannot find the itunes library.
    this stinks.
    I see no solution, until apple changes or adds a preference like "manually manage music" which seems to be available for other ipods, but not the shuffle:(
    even enable disk use doesn't help:
    http://docs.info.apple.com/article.html?artnum=61019
    my OG thread from last week:
    http://discussions.apple.com/message.jspa?messageID=3258360#3258360

    hmm - curiouser and curiouser
    I've now managed to get it to manually update (after iTunes took 100% of system resources and I had to force quit it...) but that still doesn't really help me with the auto-sync feature which still won't work
    aaaaaaggggggghhhhh

  • How can I stop auto update for the OS (not the apps)?

    Is there a way to stop the phone (mine is samsung note 3) from updating the OS (not the apps)? It works fine with the current version, and I have had/heard about issues with OS upgrades basically messing up the phone.

        srinik1, we want you to have the best wireless experience on your device. There's no way to restrict your device from receiving this update. You will continue to receive alerts to advise you to update the software on your device until you complete it. Should you have any issues with your device after updating, please feel free to reach out to us for assistance. We're here to help.
    LasinaH_VZW
    Follow us on Twitter @VZWSupport

  • How do you make Mozilla listen to users and stop FFFFirefox Auto Updating despite being set to NOT auto update?

    I am spitting nails
    After all the STUPID problems outlined here
    https://support.mozilla.org/en-US/questions/999831?esab=a&s=&r=0&as=s
    I set Firefox to stop auto updating,
    Then the other day I installed a new user on my laptop, when they loaded Firefox it auto updated MY version of Firefox.
    Has NOTHING been learnt?
    STUPID STUPID STUPID STUPID STUPID
    So I have 2 questions
    How do you make Mozilla listen to users?
    and how do prevent what happened to me happening again?

    SuperSluether
    Not a millionth, you have only provided 150 answers and I doubt they were all this issue.
    If you don't like it, don't use it.
    If a business took this attitude they would soon be out of business
    Updates help KEEP YOU SAFE
    Sometimes, but in my experience FFirefox updates can really screw up your system, lose you data, mess up your user interface. I have run IT for one of the biggest intranets on the planet and we never allowed even Mictosoft updates until we did User Acceptance Testing and understood the impact of the upgrade. I am a grown up not a child, I have system where I test updates for performance, security and impact, I WILL DECIDE when I want to install it. If Mozilla wants to provide real security updates I would take them but if you look at the link in my OP you will see it said an update was security and it completely messed up.
    Updates add tons of great new features
    Actually with FFirefox in my experience they take more away than they add, things I did not ask them to take, they do not look at my config and leave my settings as they were and then tell me about new options, no they completely screw my productivity as it takes days to figure out how to undo the kwap they have added. Copying the AWFUL Chrome interface is not an improvement, Google has one of the worst UI's on the planet accross all their products.
    Firefox is designed to be customized PER USER, NOT CROSS-SYSTEM
    There are some things that benefit from being per user and some that are per machine, windows has group policies per machine and per user. My OP is telling Mozilla that this is another area where they have "designed" badly, I tell them this so that they improve it and in the vain hope that there is some config setting that will stop this nonsense.
    So SuperSluether you have not really helped, all you seem to say is FO if you do not like it. Good job you do not run a business. With that attitude probably best you do not contribute.

  • Why, when you have auto update on, isn't the same language installed as before, but English instead.

    When auto update the new version installed is English and different from the original language installed. Probably the same thing happens with thunderbird. When I have a language installed I want an update in the same language without having to reinstall the wanted language.

    I already thought of that but it can't be the way it is suppossed to be. Firefox, and Thunderbird, offer an auto update function so the update automatically sould be in the same language and not in English as it does now. Downloading and installing your own language you can hardly call auto update.
    For now I have stopped auto update till a solution is presented.

  • How to stop the auto updater in N900 application m...

    Hey guys,
    Anyone know how to stop the auto updater in N900 application manager ?
    Coz when i connect via wifi or 3G, it always try to search for updates...Coz of that i cant search the web properly until its over.
    Specially when i connect via GPRS, i have to pay more for this extra mega bites use from app manager...
    So got any ideas for this prob...?
    (I usually use faster app manager to install apps.)
    Click the star if this helps you (",)
    If this is your answer, please do not forget to click "Accept as solution" (",)

    virajx3006 wrote:
    Hey guys,
    Anyone know how to stop the auto updater in N900 application manager ?
    Coz when i connect via wifi or 3G, it always try to search for updates...Coz of that i cant search the web properly until its over.
    Specially when i connect via GPRS, i have to pay more for this extra mega bites use from app manager...
    So got any ideas for this prob...?
    (I usually use faster app manager to install apps.)
    dude check your inbox
    Reality is wrong....dreams are for real... 2pac .
    don't forget to hit that green kudos

  • How to stop windows ipv6 route table auto-update

    In ipv6 , windows xp can get one global ipv6-address. how to delete the address and del the route in route table persistent? And stop route table auto update?

    The WsusContent folder is filled with 256 folders that are two-characters long (e.g. 00, 0A, 0B, etc), and each of those folders are filled with exe and cab files all with what appears to be a GUID as a filename.
    Currently the C:\Program Files\Update Services\WsusContent folder is 27.5GB in size with 256 folders and 15,361 files.
    Classifications are confirmed matching exactly when viewed from either the WSUS console or the Software Update Point Component Properties on the CAS server:
    Critical Updates
    Definition Updates
    Security Updates
    Service Packs
    Update Rollups
    Updates
    Product selection is confirmed matching exactly when viewed from either the WSUS console or the Software Update Point Component Properties on the CAS server:
    Developer Tools (VS 2005 - 2013, etc)
    Exchange 2007, 2010, 2013
    Forefront Endpoint Protection 2010, TMG Definition Updates for HTTP Malware and NIS, TMG, TMG Firewall Client
    BitLocker Admin
    Lync 2010, Lync Server 2010 and 2013
    System Center DPM 2006 and 2010
    Office Dictionary updates, new dictionaires, XP, 2003, 2007, 2010, 2013
    Silverlight
    SQL Server 2012, 2000, 2005, 2008, 2008 R2, 2012, feature pack
    System Center 2012 (all), 2012 R2 (all), 2012 SP1 (all)
    Windows (all except EU browser choice and graphics drivers for 8.1 upgrade)
    Admittedly we could update that list a bit, but it sounds like you don't think there should be any content downloading to the WsusContent folder at all?

  • Hp split 13 X2 does not update to windows 8.1 how do I stop the auto update

    My notebook runs with Windows 8.0 and functions well.  Unfortunately the Windows OS want so to update to Windows 8.1 and my notebook does not accept the upgrade as it will not configure the change.  Even though I have set the Windows update to require my approval before updates are initiated it continues to auto update to Windows 8.1.  When the update fails my PC automatically reinstalls Windows 8.0 and I am back working again.  This has happened 3X in the last 2 months and I am frustrated.  Does anyone have any suggestion on how to stop this cycle?

    Hi @PDaley,
    Welcome to the HP Forums!
    It is a terrific place to find answers and tips!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    How Do I Find My Model Number or Product Number?
    I understand that you are having an issue with updating your Windows 8 to 8.1. Although you have set the update to require your approval before installing the update, it does it automatically.
    When the update fails it reverts back to Windows 8 and all is well.
    Here is a link to HP PCs - Updating Windows 8 to 8.1 that may help.
    You can also go to the  Windows Compatibility Center  that may also help to determine what is required for a successful upgrade.
    This one from MIcrosoft may also help.  Update to Windows 8.1 from Windows 8.
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Maybe you are looking for

  • Purchase order number of the customer equals to the batch number

    At our case, purchase order number of the customer equals to the batch number. Purchase order number will be written on the sales document (VBKD - BSTKD). 1. How can the production department can see what is written in this field (on md04 or etc...)?

  • How to set default directory for SQL LOADER

    hi all, i wanted to know how can we setup a default directory for SQL LOADER if at all we can. i connot place my control and data files in local system and use them at command prompt. rather i wanted to know if we can set default directory that the l

  • Cfpdfformparam issues with cfprint.

    I have a pdf template that i am populating using cfpdfform, the form gets populated properly and look fine when i open it in adobe reader, but i am trying to print to a network printer using cfprint. My problem is that the pdf does not print properly

  • Toggling in while loop

    Hey ! I want to fit the scale of a graph thru button and undo the fit(when button pressed again logic 0 is latched) so that i can adjust it manually. But  in while loop i cant latch the button's logic ...Any idea how to do this... Regards, DeWalker A

  • Can you see my site with Safari 1.3 ?

    Help ! I'm not a Mac user... yet ! Can you please tell me if my site is fine on Safari 1.3 ? Thanks ! http://www.paysdevillers-tourisme.be