My Pogo game does not fit the game window even after changing resolution pixel only on Firefox.
In Pogo games my game is too large for the game window. I tried various pixel resolutions and game is still too large. Extending the window will not help.
What site?
Similar Messages
-
"BP Category 1 does not fit the data in category 2" "Replies Appreciated"
Hi Gurus,
When i am trying to create an "Individual Account" in UI, I am getting the error "BP Category 1 does not fit the data in category 2".
If i try to create a "group" then it says "BP Category 3 does not fit the data in category 2".
It allows me to create only "Corporate Account" i..e. Category 2.
What should i do to create "Individual Account" and "Group". (Category1 & Category 3).
Individual Account (Category 1) - "BP Category 1 does not fit the data in category 2".
Corporate Account (Category 2) - Able to create only Corporate Account
Group (Category 3) - "BP Category 3 does not fit the data in category 2".
Thanks & Regards
RohanHi Rohan,
Hope this SAP Note : 1232459, Solves your problem.
You might have created a custom configuration for corporate accounts.
Unfortunately in case of custom configurations exist, they are selected with higher priority.
So in this case the configuration for corporate accounts is also shown for individual accounts,
this causes error.
In order to solve this problem, create a custom configuration for individual account also,
i.e for view BP_HEAD/AccountDetails. Object type BP_ACCOUNT and object subtype INDIVIDUAL.
Please make sure that the custom configuration includes the fields firstname and lastname for
persons instead of name1 and name2 which are only allowed for corporate accounts.
I hope the above information resolves your problem.
Best Regards
Shiven -
CRM 2007 IC : error "BP category 2 does not fit the data in category 1"
Hi Guys,
When I am trying to save the data on the Bupacreate page it gives the error as follows.
"BP category 2 does not fit the data in category 1".
Can anyone suggest what is causing this error to happen and how this error can be corrected.
thanks & regards
SandyHi,
This error usually occrus when you try to set field in without specifing bptype ie person, group etc. In our scenario we were trying to set field in Person which was not present in group. but since do_prepare_output method is same in both, that feild was getting set for group as well. When we placed restriction this error got removed.
Best regards
Pankaj Kumar -
Error: 'BP category 1 does not fit the data in category 2'
Hi,
i have written a program to create a contact person and the code for it is pasted below...when i run this program i get nothing but this message in the status bar 'BP category 1 does not fit the data in category 2'...can someone tell me wht the error means and y it is coming.
thanks:)
pushpa
*table for storing the line by line records in the excel file
TYPES: BEGIN OF TTAB,
REC(1000) TYPE C,
END OF TTAB.
DATA ITAB TYPE TABLE OF TTAB WITH HEADER LINE.
*variable for storing the name of the excel file to be uploaded
DATA UP_FILE TYPE STRING.
*data to be uploaded
TYPES: BEGIN OF TDAT,
FLD1 TYPE BAPIBUS1006_CENTRAL_ORGAN-NAME1,
FLD2 TYPE BAPIBUS1006_ADDRESS-STREET,
FLD3 TYPE BAPIBUS1006_ADDRESS-CITY,
FLD4 TYPE BAPIBUS1006_ADDRESS-REGION,
FLD5 TYPE BAPIBUS1006_ADDRESS-POSTL_COD1,
FLD6 TYPE BAPIBUS1006_ADDRESS-COUNTRY,
FLD7 TYPE BAPIBUS1006_CENTRAL-PARTNEREXTERNAL,
END OF TDAT.
DATA IDAT TYPE TABLE OF TDAT WITH HEADER LINE.
DATA: BUSINESSPARTNER TYPE BAPIBUS1006_HEAD-BPARTNER,
CENTRALDATA TYPE BAPIBUS1006_CENTRAL,
ORGANIZATION TYPE BAPIBUS1006_CENTRAL_ORGAN,
ADDRESS TYPE BAPIBUS1006_ADDRESS,
BAPIRETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE.
PARAMETERS P_FILE TYPE LOCALFILE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
STATIC = 'X'
CHANGING
FILE_NAME = P_FILE.
START-OF-SELECTION.
UP_FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = UP_FILE
TABLES
DATA_TAB = ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
*writing out the contents of the internal table itab
LOOP AT ITAB.
WRITE:/ ITAB-REC.
CLEAR IDAT.
SPLIT ITAB-REC AT CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB
INTO IDAT-FLD1 IDAT-FLD2 IDAT-FLD3 IDAT-FLD4 IDAT-FLD5 IDAT-FLD6 IDAT-FLD7.
APPEND IDAT.
ENDLOOP.
LOOP AT IDAT.
MOVE: IDAT-FLD1 TO ORGANIZATION-NAME1,
IDAT-FLD2 TO ADDRESS-STREET,
IDAT-FLD3 TO ADDRESS-CITY,
IDAT-FLD4 TO ADDRESS-REGION,
IDAT-FLD5 TO ADDRESS-POSTL_COD1,
IDAT-FLD6 TO ADDRESS-COUNTRY,
IDAT-FLD7 TO CENTRALDATA-PARTNEREXTERNAL,
'0001' TO CENTRALDATA-PARTNERTYPE.
CALL FUNCTION 'BAPI_BUPA_CREATE_FROM_DATA'
EXPORTING
PARTNERCATEGORY = '1'
CENTRALDATA = CENTRALDATA
CENTRALDATAORGANIZATION = ORGANIZATION
ADDRESSDATA = ADDRESS
IMPORTING
BUSINESSPARTNER = BUSINESSPARTNER
TABLES
RETURN = BAPIRETURN.
IF BAPIRETURN IS NOT INITIAL.
READ TABLE BAPIRETURN INDEX 1.
MESSAGE
ID BAPIRETURN-ID
TYPE BAPIRETURN-TYPE
NUMBER BAPIRETURN-NUMBER
WITH BAPIRETURN-MESSAGE_V1
BAPIRETURN-MESSAGE_V2
BAPIRETURN-MESSAGE_V3
BAPIRETURN-MESSAGE_V4.
EXIT.
ENDIF.
REFRESH BAPIRETURN.
CLEAR BAPIRETURN.
CALL FUNCTION 'BAPI_BUPA_ROLE_ADD'
EXPORTING
BUSINESSPARTNER = BUSINESSPARTNER
BUSINESSPARTNERROLE = 'BUP001'
DIFFERENTIATIONTYPEVALUE =
TABLES
RETURN = BAPIRETURN.
IF BAPIRETURN IS NOT INITIAL.
READ TABLE BAPIRETURN INDEX 1.
MESSAGE
ID BAPIRETURN-ID
TYPE BAPIRETURN-TYPE
NUMBER BAPIRETURN-NUMBER
WITH BAPIRETURN-MESSAGE_V1
BAPIRETURN-MESSAGE_V2
BAPIRETURN-MESSAGE_V3
BAPIRETURN-MESSAGE_V4.
EXIT.
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE:/ 'Business Partner ID:', BUSINESSPARTNER.
ENDLOOP.Hi Pushpa,
you can use following code to create relationships using BAPI. In this Business partner is organisatin. contact persion paramenter is person. other information related to relationship details
CALL FUNCTION 'BAPI_BUPR_CONTP_CREATE'
EXPORTING
BUSINESSPARTNER = SEARCH_PARTNER
CONTACTPERSON = CONTACT_SAP
VALIDFROMDATE = '00010101'
VALIDUNTILDATE = '99991231'
DEFAULTRELATIONSHIP =
ADDRESSGUID =
CENTRALDATA = WA_CENTRAL_DATA
ADDRESSDATA = WA_ADDR_DATA
TABLES
BAPIADTEL = I_TEL_DATA
BAPIADFAX = I_FAX_DATA
BAPIADTTX =
BAPIADTLX =
BAPIADSMTP = I_EMAIL_DATA
BAPIADRML =
BAPIADX400 =
BAPIADRFC =
BAPIADPRT =
BAPIADSSF =
BAPIADURI =
BAPIADPAG =
BAPIAD_REM =
BAPICOMREM =
RETURN = I_RETURN
hope this will help you
Siva -
I am trying to transfer photos, music, etc from my Power Mac G5 to my new iMac. The Power Mac is too old for the migration assistant to help. I have an old Firewire but it does not fit the new iMac. Any suggestions? If a Firewire is the best option which one do I need? Thanks.
You need a Firewire 800 to 400 adapter or cable or a external USB 2/3 drive (self powered) it can default to the old USB the G5 uses 1 or 2.
Format the drive info here.
Backup and restore info
https://discussions.apple.com/message/16276201#16276201 -
using ios 8.1 on iphone 6. when I add a contact on the phone it does not appear in icloud contacts even after backup. pl resolve
Hello feroziem,
The article linked below can help get iCloud and your iPhone to synchronize your contacts.
Get help using iCloud Contacts
http://support.apple.com/en-us/TS3998
Cheers,
Allen -
Adobe Acrobat 8 Professional does not accept the correct serial number after reinstallation
Adobe Acrobat 8 Professional does not accept the correct serial number after reinstallation, what to do?
Thank you Bill. You could help me with the answer and the one in the other forum:
"Acrobat has a separate installation process and needs to be activated with your Adobe ID I think. The question on CC is really one for the folks in the CC forum (Adobe Creative Cloud), not the Acrobat forum".
I could resolve things with Adobe CC. I don´t need my old Acrobat 8, but I could finally install Acrobat XI Pro - and this time it seems to work, without permanently crashing down.
Thank you. -
Adobe Acrobat 8 Professionals does not accept the correct serial number after reinstallation
Adobe Acrobat 8 Professionals does not accept the correct serial number after reinstallation, what to do?
Moved to Acrobat Installation & Update Issues
-
My 4s Goes to speakerphone automatically while calling and does not go back to normal even after disabling speaker phone button
AlsO sometimes I. Cannot hear anything in normal speaker even though the call Is going through and has been re ieved on the other end, I have to enable speaker and then disable it to route audio to normal speakersI think that it is something wrong with kernel and graphic drivers but i'm not able to solve it from the beginning of using of Arch by me.
I'm not so sure this issue is software-related only because in my case it seems the laptop screen enters power-saving mode (10-min timeout) on its own without any events logged (as shown by dmesg) so my next thought was OK, I'm going to get rid of this issue disabling the screen power-saving timeout in the BIOS and set it to never power down or something like that and from then on managing power mode manually; ie: when I want to power down I will just use systemctl suspend/hibernate which work fine ... problem is: there are no related options in my BIOS for such timeout.
The only timeouts I have are in /etc/systemd/logind.conf set to 30min (#IdleActionSec) (commented) by default so these are not in effect because the screens goes blank after 10m which is less than the (default) 30m in logind. Maybe setting loggind to 9m (un-commented) to catch the event before the machine-default one ?
IdleActionSec=9min
IdleAction=suspend
Will check it and report back. -
Bought a new monitor.. wide screen 23"... Firefox is not filling the full window. IE works fine but I prefer Firefox. What do I need to do to fill entire window, not just the way it was with the old monitor? edit
Most pages are defined to be a certain size, regardless of how large or small your monitor is. You can use Firefox's zoom feature (View menu) to enlarge the text and images (or just the text, if you prefer) on a page.
In addition to making individual site adjustments, there are some add-ons that will default every site to a higher zoom level. For example, check out:
* [https://addons.mozilla.org/en-US/firefox/addon/6965/ Default FullZoom Level]
* [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint]
Does that help? -
HT3176 my apple remote will not link to my appletv even after changing the battery
my apple remote will not link to my appletv even after changing the battery. can anyone help?
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.
-
I had an ipod touch 4th generation and used the Apple Universal Dock to play music through my stereo. I just got the 5th generation and the lightning adapter but the adapter does not fit into the dock. Apple tech support has no solution, does anyone?
That is the adapter I purchased from Apple which does not fit in the Apple Universal cradle (which apparently is no longer universal). However, I just created my own solution. The cradle holds the dock connector at a slight angle so the adapter, which has a straight bottom edge, will not slide down far enough to make a connection. Since the adapter has a plastic case, I used my Swiss Army knife to whittle it down to fit. It's a no-tech solution, and free!
-
IDCS3 "page size does not fit w margin/column" error when changing bleed
Anyone know the source of this problem?
After deselecting "allow pages to shuffle" my bleed automatically, mysteriously, changes from 0pt to 9pt. When i try to change it back, I get an error: "This page size does not fit with the current margin and column settings. . ."
This happens on multiple docs.
The problem occurs in both Tiger and Leopard.
Help!
ThanksI'm having the same problem in CS4 when I try to create a document. I zeroed out the margins and gutters too but I didn't have any luck. It's also inconsistent in my case. I can create a document the size of a US business card with a margin of 3p0 but when it get's to something bigger than that but smaller than a letter, no gutter or margin will work.
But that only applies to document creation for some reason. So far, my workaround has been to create a default document and then resize it using the document setup after the fact. It's a pain and it's weird, but that's what I've had to do.
If you've come up with a better solution since your post, I'm all ears. -
New I Mac- safari does not show the URL window- help!
My safari does not show the website address window, but everyone else in the family shows it. How do I fix this so that I can view the address window. Thanks.
HI John,
From the Safari Menu Bar click View/Customize Toolbar.
Drag the default Toolbar up or individual items.
Carolyn -
I can log in to my apple account but not to the ICloud apps even though I am using the same Apple ID.
MickeDo you mean names and passwords in the Password Manager or do you mean that you are no longer logged on to (remembered by) websites after closing and restarting Firefox?
There is a difference between remembering the name and password in the Password Manager and a "remember me" check box on a web page to log you in automatically.<br />
The latter usually involves the creation of a special "remember me" cookie that is stored on your computer and that is send to the server.<br />
If that "remember me" cookie is removed or gets corrupted or is not send to the server then the server won't remember you anymore and you need to sign in once again.
*Create a cookie 'allow' exception to keep such cookies, especially for secure websites and when cookies expire when Firefox is closed.
*Tools > Options > Privacy > Cookies: Exceptions
* http://kb.mozillazine.org/Cookies
* http://kb.mozillazine.org/Password_Manager
Maybe you are looking for
-
Automatic form generation on creation transfer order for delivery note?
Hi, I have to create a form that should automatically be generated on the creation of a transfer order for delivery note. How do I trigger this automatic creation of the form? And how can the transfer order number be passed to my print program? Thx!
-
No Objects found! - Sotware components for Business System
Hello, I have changed the product assignment to the technical system after configuring the Business systems in IB. Then I am getting 'No Objects found!' in the 'Other Attributes' tab of Display Service -> Business System. Kindly do let me know How to
-
How to use iTunes gift card in App Store
My kids each just got an iPod touch with a gift card to iTunes ......how can they each purchase apps and things from iTunes while using my apple account? We redeemed the gift cards but I don't think it's set up right because the app price wasn't dedu
-
When trying to sync my Apple TV and iPhone after the 7.7 update, iTunes will only recognize "Last Import", and "Last 12 Months" folders. It will not show any of my events. When I choose to import all photos and albums, they come over, but all uncateg
-
In the logic Pro manual, the FX plugin section is thorough. Every plugin is explained. The FCE manual seems to fall short on this issue. It details the function of some of the filter effects as examples of editing procedures, but not much else. Where