My post code new ipad4

Trying to set up account for iTunes etc but the account form does not recognise the post code of je26sa I live in jersey ci

Use this:
http://www.coolwebhome.co.uk/fibre/checker.php
Postcode Exchange Service Type Probability Speed Increase Phase Cabinet
CH665PN
HOOTON
FTTC
75%
2.9
8a
P18
CH665PN
HOOTON
FTTC, but not available yet
25%
P23

Similar Messages

790FX-GD70 - FREEZES ON POST CODE "08"

Hi
I have just made a new build on a new 790FX-GD70 winki board - on initial start up it's freezing on the POST code "08". Nothing is showing up on the screen at all. Apprently this means:
08
Initializes the CPU. The BAT test is being done on KBC. Program the keyboard controller command byte is being done after Auto detection of KB/MS using AMI KB-5.
(according to http://www.ami.com/support/doc/AMIBIOS8_Checkpoint_and_Beep_Code_List_PUB.pdf)
The trouble is i just don't know what that means I should do - without anything on screen to go by!
My system is
MBD: 790FX-GD70
CPU: PHENOM II X3 720 2.8GHZ BLACK SKT AM3 7.5MB 95W PIB
RAM: 2gb from: Corsair Dominator XMS3 4GB (2x2GB) DDR3 1600C9D Twin3X (TW3X4G1600C9D)
GRAPHICS CARD: SAPPHIRE ATI RADEON HD 4770 512MB GDDR5 TV-OUT/DUAL DVI HDMI PCI-EXPRESS - RETAIL
PSU: 650W BeQuiet Dark Power Pro Modular PSU BN073
Any help or ideas would be really great as i'm totally at a loss.....!?

Quote from: Henry on 07-September-09, 18:24:45
... What PSU model and amps for +12V rail(s)...

'You can post in new year only after closing the previous year

Hello Experts,
I am also getting same error while executing depreciation run AFAB ''You can post in new year only after closing the previous year''.
I found one OSS Note 18800 and it is saying solution as below ...
At the first depreciation posting in the new fiscal year after a shortened fiscal year, the fiscal year variants must, in all cases, still be entered in asset customizing and in FI customizing for the affected company code. If necessary, all periods for the following fiscal year must be maintained with the variant of the shortened fiscal year.
Up to 2.2D the following correction must also be installed:
Please carry out the syntax check only in main program SAPLAFAR.
But in my case there is no shortended fiscal year.
Can I apply this OSS note correction instructions ?
Please suggest me.

Hi
I don't think so. Moreover that is applicable till 2.2D.
Moreover depreciation is to be run for all periods you have not run earlier. Please check upto which period dep run has happened. Thereafter close the fiscal years in order thro AJAB.
S Jayaram

Set maximum Number of post in News Feed WebPart

Is it possible to configure maximum number of Posts in News Feed webpart under following and EveryOne.
Also would like to know more about Newsfeed webpart internal functioning. Any link woud be really helpful.
Ashish Baranwal To know what you know and what you do not know, that is true knowledge

Hi Ashish,
The Newsfeed contains recent activities from followed entities. The
Newsfeed displays 20 items and is sorted in reverse chronological order. Items listed in the
Newsfeed are activities from entities a user follows, and conversations from any site feeds the user follows.
The Everyone feed shows the last 20 posts or replies across all users. The distinction between the
Everyone feed and the
Newsfeed is that the
Newsfeed only shows activities from entities the user is following.
More information, please refer to:
http://technet.microsoft.com/en-us/library/jj219700.aspx
There is not an OOB way to change the max number of posts in Newsfeed. You may try to use Code to achieve it. Here is a similar post for your reference:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/545b139c-8c07-48bc-93e4-3b1ef5f4bad2/community-site-newsfeed-posts?forum=sharepointdevelopment
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Additional field post code 2 in search in webui

Hi,
I am new to crm webui.I need to add the additional field post code to search this field is not available in the context node but is a standard feature.Please tell me step by step.
P.S points will be awarded.

The good news is that the field is in the underlying search function module used by Business Partner Search.
All you need to do is the following:
Add the field
POST_CODE2 data element AD_PSTCD2 to the structure CRMST_HEADER_SEARCH_BUIL.
This should magically make the element available for search and you will only need to configure your screen to have the element bound beyond the context node config.
I believe this should work, based on looking at the code used for the BP search.
Good luck,
Stephen

Job opening - Flex Programmer/Developer/Coder – New York, NY

Flex Programmer/Developer/Coder – New York, NY
A well-funded, NYC-based start-up that designs, develops, and provides proven, innovative, content sharing software and services for the social media/networking industry. Due to continued growth, there currently exists an opportunity for an exceptional, full time Flex Programmer/Developer/Coder with at least several years experience in programming tasks directly related to User Interfaces, and above-average communication skills, with abilities to write clear, clean, readable, portable, reliable, and manageable code; and to communicate effectively with designers, developers and investors to implement new UI features.
At least a year or two of working knowledge/experience with Flex (for web and database) is required, with additional programming skills utilizing front-end web development technologies including PHP, MySQL, JavaScript, etc. highly desirable. Further experience with end-user usability paradigms for web and desktop applications is ideal. In addition, the successful candidate will be very smart, leading edge, and a quick learner; and express a genuine interest in innovative social networking technology. Minimum education requirements include a Bachelor’s Degree in Electronics Engineering or Computer Science from an accredited university. Having graduated with honors and an impressive GPA can be a “big plus.”
This new position truly appears to be a great opportunity for an entrepreneurial “rising star” who desires the stability and creative energy of being part of a small but dynamic and enterprising, high-caliber team. The company offers a competitive compensation plan, with starting annual base salary dependent upon experience.
Candidates must be legally authorized to work in the USA without sponsorship.
=====================================
Please send your resume to [email protected]
=====================================

You should post this in flex.org, not here.

Depreciation run problem."You can only post in new year after closing the"

Hi,
We are implementing Asset accounting to one of our co code.New Assets were created in Jan and when I tried to Post depreciation for Jan, I get an error log that says "You can only post in new year after closing the previous year."
When i double click on error message.
Diagnosis
You want to post in a new fiscal year. However, a posting must have been made in the last period in the previous fiscal year before you can do this.
Procedure
Post to the last period in the previous year first.
So I went ahead and opened the previous year, posted the depreciation, closed the year and tried to post Period 1 again, but still get the same error.
Why do I need to post the previous period if I just created the assets in this period?
I Have completed AJRW, AJAB also.
I think it may be a problem with Table. Please suggest me.
Thank you

Hi,
Please check the following :-
1. Check the Last Closed year in your Asset Accounting.
2. Check the Last Depreciation Posted in Your Asset Accounting.
These 2 menus are available in "Data Transfer in Fixed Asset Accounting".
revert back to me for further actions,
regards
N.Kumar

I am trying to change my country from South Africa to Uk. I change my address on my id. When I sign into apple store, it asks me to verify the address details. It then comes up with invalid post code. All that works is the SA post code, not any UK code

I am trying to change my country from South Afrika to UK. I went into change ID, chose UK flag, changed everything to the new address. Logged into Apple Store, then got a message to verify account. Tells me invalid post code. Will not take anything else except my SA postcode. Then Apple store reverts back to Soth Africa and not UK

You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
(118441)

HT1695 I have the new ipad4'32gb non cellular,but I can't use ipad anywhere,very disappointing.What are my options?

I have the new ipad4 but I didn't know it was non cellular so am very disappointed with the wifi signal when I leave home hub .What are my options now?

If you mean that WiFi performance is poor when you connect to other WiFi access points, post details and someone may be able to offer suggestions to improve performance. If you mean that you wish to have connectivity when a WiFi access point is not available, then your options are:
- Tether the iPad through a cellphone that offers Personal Hotspot capability;
- buy a MiFi device, available through many carriers, and sign up for a data plan;
- return or sell your WiFI-only iPad and buy a WiFi+Cellular model.
Regards.

We have three discussions forums with same subject. whenever a post gets new reply in one forum, it should automatically trigger workflow functionality to check conditions and send the same reply to other synchronized forums.

we have three discussions forums with same subject. whenever a post gets new reply in one forum, it should automatically trigger workflow functionality to check conditions and send the same reply to other synchronized forums.
Rajiv Kumar

Hi,
More details about your discussions forum will make others easier to find a corresponding solution on your requirement.
If you mean there are three Discussion Board list waiting for synchronizing, I would suggest you create an Event Receiver for the three Discussion Board list.
Here is a link with code demo about how to copy items from one Discussion Board to another including Replies:
http://spcodes.blogspot.com/2013/03/programmatically-copy-items-from-one.html
Here is a step by step sample on creating a simple Item added event receiver for Custom List in SharePoint 2010:
http://msdn.microsoft.com/en-us/library/ff398052.aspx
More information on Event Receiver for your reference:
http://msdn.microsoft.com/en-us/library/gg749858(v=office.14).aspx
http://msdn.microsoft.com/en-us/library/ff408183(v=office.14).aspx
Feel free to reply if there are still any questions.
Best regards
Patrick Liang
TechNet Community Support

Asset You can only post in new year after closing the previous year

Hi Experts,
I am getting below error while running the depriciation:
You can only post in new year after closing the previous year.
Message no. AA687
Diagnosis
You want to post in a new fiscal year. However, a posting must have been made in the last period in the previous fiscal year before you can do this.
Procedure
Post to the last period in the previous year first.
Note : I closed FY09, even though there were no assets in it at the time. The first asset was capitalized on 12/29/09 (clearly in FY10). I tried closing FY09 again and got the messege No year-end close is necessary for company code XXXX .
Could you please any one help me on this.
Thanks In Adwance
Regards,
Saritha.

Hi Saritha,
Please check the following settings:
o Is there one ore more years since the last depr. run?
Solution: in this case an entry must be made into the table TABA.
                  Note 144441 gives a solution to make a "Dummy-entry".
o If there was never a depreciation run, the there must be 000/0000 in
TABA and T093D.
Solution: please take the report from the note Note 144441
                  and put the values 000/0000 in this fields.
o Do you have a non-calendar fiscal year (e.g. 2009/10)? In this case
    you should have in the field T093D-AFBLG the year 2010.
    Solution: Correction with note 26073
regards Bernhard

Post code error when installing apps (4s)

Hi, I have a new 4s and I cant install appls because it always says "wrong post code" even though I have entered the right one. Any ideas how to fix this? Thanks

I would suggest you try and update to the latest Ovi Store, now called Nokia Store.
With your phone's browser go to the following address:
http://lr.ovi.mobi/store/new-symbian-3
you should then get the option to install the latest Nokia Store client, and this should include new QT files. Corrupt QT files are usually the problem when installations from the Nokia/Ovi Store fails.

MSI 990FXA-GD80 updated POST code "99"

I started my computer up last night after 3 months of using it and now it is posting a 99 code when I start the computer. I can't get to bios or boot. Keyboards will not work (both PS2 and USB). BIOS was completely up to date for nearly 3 weeks.
This morning, to no avail, I tried a new power supply.
At this point I have tried all of the following:
-Disconnecting HHD (SATA and POWER)
-Disconnecting Opitical Drive (SATA and POWER)
-DISCONNECTING ALL F-PANEL (PWR SW, PWR LED, HDD LED, RESET SW)
-Disconnecting the USB and HD AUDIO
-Disconnecting ALL fans.
-Mounting and remounting the motherboard
-Mounting and remounting the CPU
-Attempting to use a new video card
-Attempting to use a new power supply
-Placing MOBO on a different surface
-Reseting the CMOS via the on board button and removing the battery
-Using only 1 stick of ram to boot
-New PSU
Basically I am booting the PC with the power button on the MOBO and the only things connected are the 8 pin MOBO power, the CPU, 1 stick of ram, and 1 of 2 different working video cards.
After doing all of those things, the MOBO stills post code "99" on the screen and on the MOBO itself. Additionally, keyboard does not work. Furthermore, I cannot access my BIOS or boot screen.
The original video card and the replacement video card both work on another PC therefore they are not the problem.
Thus, at this point, I have narrowed the malfunction down to either the following two components:
-Motherboard
-CPU (which I doubt, but do not have a AM3+ mobo on hand) or another AM3/AM3+ processor
Any suggestions or advice are more than welcome and needed.
I am considering RMAing the motherboard...

Quote from: xmad on 19-July-12, 03:06:34
Hopefully the cpu isn't the problem, wish there was a way for you to test it out. A computer shop perhaps?
Just to be clear, you removed the mobo from the case with just a cpu, cooler, 1 stick ram & psu and don't hear the no vga beep?
I see you already tried a new psu.
Hope you get it right soon, good luck I think you are right it's either the cpu or mobo.
Yes. The GPU is working fine I tested it in another computer. I installed another working GPU, it did the same "99" post.
Unfortuneately, there are 2 PC shops close by. 1 of them is a "mom and pop" type place that really doesn't get too deep in to technical aspects and doesn't care much for AMD products. The second is a shop that only carries very low end products as well as some i3 type proccessors and mobos.
Thus, since none of the computer stores give a flip about AMD, I am out of luck in that aspect. I have quite a few AM3 boards laying around, but that does me no good with this Zambezi.
On a side note, I decided to remove the processor. The processor and the heatsink became merged together. What I mean when I say they became merged is that the thermal paste become basically a superglue between the heatsink and the processor (the FX-4170 naturally runs hot, thus, AMD has included an upgraded heatsink in it with better thermal paste). Anyhow, in order to remove the thing I could only get the mounting lever about a little over half way up. Therefore, on the back row, the pins bent a little (I would say there were making somewhere between a 80-85 degree angle orthogonal to the board). I took a credit card and a screw driver and straightend the pins, stuck it back in, still posted the same thing.
Last but not least, I read over the mobo specifications and realized that it was backwards compatible. The MSI 990FXA-GD80 AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard supports the following CPU types/sockets:
Quote
FX / Phenom II / Athlon II / Sempron 100 Series
I realized I had a (working) AMD CPU HDZ955FBGMBOX Phenom II X4 955 Black Edition 3.2GHz AM3 125W Retail, thus, I mounted it on the MOBO... SAME CODE POSTED...
It must be the motherboard.

I'm trying to set up a new ipad4. It won't access my home wi-fi. The network is ok because this iPad is currently on it. It won't connect to iTunes either. What can I do?

I'm trying to set up a new ipad4. It won't access my home wi-fi. The wi-fi is working because I'm using another iPad to type this. The new one won't connect to my iTunes account either. What can I do now?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Post Code for UAE

I cannnt get any applications asking for Post code and billing information

Good news.
The issue is discussed at http://www.boards.ie/vbulletin/showthread.php?p=62084331
Setting the Postcode to 0 worked for me.

My post code new ipad4

Similar Messages

Maybe you are looking for