My power button has stopped working is there any other way of taking a screenshot

My power button has stopped working is there any other way of taking a screenshot

If the power adapter is already plugged into your computer, the AC power cord is likely to spark as you attempt to plug it in.  The power adapter is designed to shut down when a potentially damaging situation occurs.  The "sparking" can cause over-current and over-voltage protection circuits to turn the power adater off.  When this occurs, you should unplug the power adapter from the wall, unplug the power adapter from the computer, wait 15 seconds, plug the power adapter into a properly-grounded AC wall outlet, and then plug the DC output cable into the Mag-safe connector.

Similar Messages

  • Hello, my iPad's power button has stopped working. Does anyone have a solution as to how I can make it work again

    Please help. My iPads power button has stopped working. I cannot take it to sleep mode or switch it off

    Try a reset even though the Sleep/Wake button is not woring.
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • My power button has stopped working - seems to have lost it's 'spring'. My phone is over a year old and out of warrenty - any options?

    My power button has stopped working - seems to have lost it's 'spring'. My phone is over a year old and out of warrenty - any options? It also seems to be going thru the battery in less than a day which was never the case. Are these two situations related?

    I don't know if they are related or not, but I'd take it in to an Apple store.  They might be gracious and offer to replace it, or at the least, it may be eligible for an out-of-warranty replacement at a reduced fee (currently $149.00 for the iPhone 4, 3Gs, 3G, and original - you get a refurb as replacement).

  • My 2nd Generation Ipod touch lock button is no longer working is there any other way to lock my screen?

    my 2nd Generation Ipod touch lock button is no longer working is there any other way to lock my screen?

    Just go to Settings>General>Autolock and set a time period.

  • HT1212 When i connect to iTunes it says that i have enter my passcode to go in, but i have forgotten my passcode, and the power button is not worrking, is their any other way to do it without the computer or any other internet stuff or stores,

    When i connect to iTunes it says that i have enter my passcode to go in, but i have forgotten my passcode, and the power button is not worrking, is their any other way to do it without the computer or any other internet stuff or stores,

    No. You need a computer with iTunes and an internet connection.
    Place the iPod in recovery mode using one of these programs and then restore via iTunes:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • Power button has stopped working...

    well friends, 
    after powering on my playbook and when i put it on standby mode.. to again work on it vn i press the power button, it doesnt work. i need 2 swipe on d screen 2 gt it started.. what is the problem.. cn ne1 help me..

    Did you try the procedure I mentioned above?

  • My iPone 5 has broken the lock button has stopped working and there are many other software problems, I was wondering would I go about in getting this repaired by apple?

    I have my phone since november and it has slowly start to bug out, the brightness will just adjust itself, it won't repond to my touch. The lock button has completely stopped working. What do I do? I've never had to deal with apple ever before so I'm not aware of their producer and how long do I have to wait to recieve my product? Hoping you could answer my question. Many

    I should have seen that coming
    Start here
    https://expresslane.apple.com/Issues.action
    assuming you are in US
    Following on from excellent advice above you pick the  "Genius Bar" from top menu of particular store

  • Can't lower voice memo volume. My decrease button doesn't work anymore. Any other way i can lower it without disabling speaker

    Own an iphone 5. Can't control voice memo volume from anywhere that deals with volume on my phone. My decrease button doesn't work. I have to listen to my voice memos on full blown volume. Can't lower it from settings or from music. Help please!

    Hi,
    thanks for your answer. 
    The Size of all disks is: 6 x 4 TB.
    In the Pool are 5 x 4 TB plus 1 x Hot Spare. 
    It comes up to about 14,6 TB of Data formatable.
    But tried it also with just 3 x 4 TB to see if it works. 
    I just made a Raid5EE on the controller and then used Storage Spaces with simple, all worked fine. 
    Here the results of my tests: 
    1) your command had to be modified (typoe in usemaximumsize, and had to add -ResiliencySettingName Parity. 
    new-virtualdisk -friendlyname testpsh -storagepoolfriendlyname test -ResiliencySettingName Parity -usemaximumsize
    But anyway, my problem is not creating the virtual disk, but formatting the partition if it's parity only. 
    I added a screenshot: 
    Here you see my storage pool, and I added 3 virtual disk. 
    1 simple, 1 mirror, 1 parity. Only the parity cannot be formatted. The others can. No mather which size I do. 
    About a testserver, I added 4 x 4 TB to a VM (VHDX-files) and could do parity without problems. So it seems it is this server specific.
    As it worked with another controller, I really wonder if the controller could break parity of Storage Pools?
    The other weird part is, it sais "Raid" as BUS, but it's set to pass through, in details I see the serial of the attached HDD. 
    This is what properties shows on this volume. Always RAW. 
    I also tried Software Raid5 within the server. 
    This also worked fine. So really only parity. 
    Thanks
    Patrick

  • My power button has stopped working,

    i am still within my one year warranty, but my front and back screen are smashed, will this affect me getting a replacement or it getting fixed?

    Hmm honestly it might, back up your info, make an appointment and bring it in to see what they can do.
    You'd have a good case for an in warranty issue...
    I'd be nice, bring it in for the button and say that happened before the damage.
    The button not working is something that should be covered by the warranty.
    goodluck

  • My iPod Nano 6gen power button has stopped working. How do I fix it?

    It for some reason froze. How do I fix it? And it can't turn on.

    Hi peace1161,
    If you are looking for more information about repair pricing should you decide to have your iPod Touch serviced, you may find the following page helpful:
    Service Answer Center - iPod
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
    Regards,
    - Brenden

  • My iPhone 4 sleep/power button has stopped working?

    I was told by a friend that if I go into the apple store, because my iPhone is out of warranty, they'll offer me a brand new handset for £100. Is this true?

    You get an out of warranty replacement...could be new or refurbished...comes in a white box.  Cost is £126.44, I believe.
    Refurbished is indistinguishable from new.

  • HT5554 my mother in law has no internet at home and just got a 16gb ipad air, she bought a sim card from currys but of course she needs the ipad air with cellular for that to work is there any other way she canget hold of any portable router that will all

    can anyone help, is there anyway you can get a portable router for a 16gb ipad air

    Buy a wireless hotspot from any wireless carrier.

  • The on and off sleep button at the top of the phone has stopped working is there anything I can do

    The on/off/sleep button has stopped working, is there anything I can do to get it to work?

    Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • My home button has stopped working on my iPod touch 4th gen. Is there a way to fix it?

    My home button has stopped working all together!!!!! Any ideas how to fix??
    Many thanks.

    Try:
    http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • My iPad 2 home button has stopped working I have tried the swivel from landscape to portrait whilst holding the button, I have tried holding the off button then the home button and I was told I could create my own home button in the settings but I can't!

    My iPad 2 home button has stopped working all together, I have tried the swivel from landscape to portrait whilst holding the home button, I've tried pressing the off switch then pressing the home button, the other thing I was advised to do was create a home button in the settings under the accessibility option but I don't have the option I was advised to use under there! Help! It's really frustrating having to turn the device off everytim I want to switch apps and I really can't afford to send it away to be mended! Many thanks in advance

    The accessibilty setting that was mentioned is:
    * Enable AssistiveTouch
    Enable AssistiveTouch which floats a virtual button on-screen which can mimic all hardware buttons on the device:
    Settings>General>Accessibility>AssistiveTouch: turn ON
    *Note* If you power off the device using the AssistiveTouch panel (tap the on-screen AssistiveTouch button, Device>Lock Screen (tap and hold to power off)), you will NOT be able to power on the device *if your Sleep/Wake (power) button is not functioning*. You will need to connect the powered off device either to a PC's USB port or an external charger to power the device back on.

Maybe you are looking for