My powerbook can't recognize a font!

Hi, experts! I have a FFIL font(New Baskerville) for my web design job. I've copied it to Fonts folder a few times but either Font Book nor other applications such as Photoshop. Could anyone help me? Thanks in advance.

Was this downloaded directly to your Mac... or through a PC perchance? Or a FAT32 Disk?
PC/Mac Fonts...
http://www.macdisk.com/fontsen.php3
http://www.asy.com/fonts.htm
Or you might give a link to the Font.

Similar Messages

Can you recognize this font?

Thank you in advance

pufna,
You may try here,
http://www.identifont.com/
http://www.bowfinprintworks.com/ScriptIDGuide.html
http://www.whatfontis.com/
http://www.myfonts.com/WhatTheFont/
and you may also try to ask in the Typography forum,
http://forums.adobe.com/community/design_development/typography?view=discussions&start=0

While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

Thanks for answering. The version is XI.0.10. I just did the update yesterday hoping that I could now properly edit a scanned pdf document. Yes, it's happening on most all scanned documents. I followed your steps & found the list of fonts used in the document & then attempted to edit. The same occurs. When I type in a correction, I get an error alert... "the original font (in this case Fd 5805) is not available or can't be used in editing. Acrobat is using the font Minion Pro in its place."
When I select the text & right click as you suggested, my only choices are cut, copy, delete or select all, no "edit text".
I have no other options to choose another font. Thanks for any help you can direct my way.
Debbie
From: sukritd15 <[email protected]>
To: Deborah Karr <[email protected]>
Sent: Friday, February 13, 2015 5:35 AM
Subject: While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
created by sukritd15 in Creating, Editing & Exporting PDFs - View the full discussionHi Deborah , I would like to know couple of things before I assist you further.1.Which version of Acrobat are you using ?2.Is it happening for all the scanned PDF' or any particular PDF? You can try these steps,Launch the scanned PDF >right click >Document Properties(from the drop down list) >Fonts(on the dialog box)>From here you will get the fonts used in that PDF . While editing the PDF ,select the text that are editing or typing in with the help of selection tool .After you select the text ,right click on the text and choose "edit text" from the drop down list .From there you will be able to choose the desired font . RegardsSukrit Dhingra If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7190881#7190881 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7190881#7190881 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How can I limit the fonts in the Character Map (charmap) and reinitialize the state after use?

In a WPF application I have a RichTextBox in which users will be inserting text. I also must give the user the ability to insert characters. To do so I have called up charmap.exe using
Process charProcess = new Process();
ProcessStartInfo startInfo = new ProcessStartInfo();
charProcess.StartInfo.FileName = strCharmap;
charProcess.Start();
etc., and it works fine. There are several problems I have basically with charmap, however, not with WPF. The first is that because of the subsequent use of the user’s insertion in the RTB, I must restrict the font to “Ariel Unicode
MS.” So far all I have been able to do is instruct and warn the user not to change fonts and
change back any font change that occurs as a result of use of “Advanced view” features.
Question number one is, how can I restrict the fonts loaded into charmap to this one font? The second problem is that if another font is called up, or the “Advanced view” state of charmap is closed, or a “Group by” feature is opened, these choices will
be retained for the next user that opens charmap. How can I initialize the state of charmap for each new user with the correct font and “Advanced view” features showing. It is said,but in old posts, that reinitialization occurs for all but administrative users,
but this seems to be no longer true. I have tried permission changes in charmap’s Properties, but I can’t get the necessary reinitialization to occur even if user’s don’t have modify permission. Can one use a .ini file, or the .mui file, or make Registry changes
to accomplish my goals. There seems to be a warning in the .mui file about changing fonts, but is it cancelled? I am using Windows 7 and C#.
I have looked at other character maps but they are either too complicated for the casual user, or they have no search engine and advanced features, or they have the same problems.
I am pretty much a novice with respect to the Windows files use and WPF, so please be fairly clear, complete, and prescriptive in your answer. Also so that I and others can learn, it would be nice to have an explanation of why one does whatever you suggest.
Your help is appreciated.

Hi,
Thanks for your post!
According to your description, I am afraid your problem is out of support in C#language forum. So i move your thread to off-topic forum!
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. Thanks<br/> MSDN Community Support<br/> <br/> Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and
makes it easier for other visitors to find the resolution later.

Acrobat X Pro does not recognize system font

I scanned a document to pdf, opened it in Acrobat X Pro and then applies OCR to the image by clicking Edit in the OCR dialogue and chose ClearScan. I then went to edit the text, but when I clicked on a selection, a TouchUp dialogue box popped up stating, “All or part of the selection has no available system font. You cannot add or delete text using the currently selected font.” The font used in the document was Arial 10 pt. Does Acrobat not recognize that font? Is there any way to edit this pdf's text?

I still haven't got a sense of what exactly you are after, since you are not only talking about settings with visible OCRd text. But my results partly support yours, partly not. My tests were with Acrobat X, your mileage may vary.
OCR with searchable image... the image contained standard fonts, which I could freely edit. No problem, except of course that the results didn't change on screen. I could also correct OCR suspects, which is the editing Adobe are expecting you to do.
OCR with cleartext... the image contained generated fonts, which I couldn't change. I don't see this as a security thing, rather that Acrobat has generated synthetic fonts which match the exact appearance of the scan, and has no idea what the original font was. I can't edit these, because I don't have the font. (If it let me edit them I suspect it would fail horribly, because the generated font will only contain the letters it believes to be there, not other ones you might need). I can, however, select the text and change the font, then edit the results. There were no OCR suspects, which I find a little odd for the same original, but the OCR was indeed more accurate.
By the way, I may not have made this comment: editing PDFs is sometimes possible, but it should always be thought of as a desperate last resort. Just be happy the few times you can use it, don't expect much or anything, and you won't be disappointed. If you want to edit scanned text (as opposed to correct OCR) don't scan to PDF.

Error Message. IE doesn't recognize webkit font, converts to arial

MuseJSAssert: Error calling selector function:TypeError: 'undefined' is not a function (evaluating 'PIE.attach(this)')
I get this error in IE only. Also, IE doesn't recognize my font and converts everything to Arial, so it's all bigger and bolder and it doesn't fit how I want it to.
I'd like to know what this error means and also how I can get IE to recognize the WebKit font that I have used.
procleansupply.net

Hi ChoreoGraphics,
Search and ye shall find [see link below]
Newsgroups in Safari or Mail?
Hope that helps.

Does Indesign CS4 recognize missing fonts in links?

Could anyone tell me if Indesign CS4 (or any version of Indesign) will recognize missing fonts used in a linked image? We have a customer that is using Indesign CS4 they have linked images from photoshop (no fonts in the photoshop images) and .eps files that were created using Easy Barcode Creator. Indesign is not seeing that the font is missing from the eps file (easy barcode reader), nor is there an error when exporting a PDF or print a PS. Preflight in Indesign doesn't detect this either. If I open the eps in Illustrator then I get a font missing error. I don't want to open all the files (supporting links) to find out if I have missing fonts. Any suggestions would be appreciated. Thanks

I've been playing with this a little, and I get what you see, too with .eps files. Find font will list the fonts used in the links, but for the most part woen't tell you if they are missing (seems to know they're missing in placed .indd files, though). Not a whole lot of help, but at least it puts the list out front where you can see the fonts, and check to see what doesn't look familiar.
Maybe the scripting guys have some clever ideas.

Can't import old fonts

I just got a new Intel iMac and had several fonts from a previous mac. They are in Font Suitcase form. For some reason, Font Book on my new iMac will not import them. They are not corrupt as they are still fine on my Powerbook. Do the new iMacs only read TrueType fonts or is there a way to use my old fonts?

Font Book's Help gives these instructions for installing fonts. Is this what you are doing?
Installing fonts
When you get new fonts, you can install them using Font Book. When a font is added in Font Book, it automatically appears in the available font lists in your applications and in the Font panel.
1. Insert the disc that contains the new font, or copy the font to your hard disk from another location.
2. Double-click the icon for the font in the Finder. Font Book opens and displays the font so you can see what the font looks like.
3. Click Install Font.
The font is automatically installed in your Library folder so it is available only to you. If you want to make the font available to all users of the computer, drag it to the Computer folder in the Collection column of Font Book.
You can change the default install location so that fonts are always available for all users of the computer. You can make this change in Font Book Preferences.
To see a list of the fonts installed in Mac OS X, click the link provided on this page to open the Apple Support website. Then search for "Mac OS X fonts list" and choose the article that corresponds to your version of Mac OS X. To verify which version of Mac OS X is on your computer, click Apple > About This Mac.

PowerBook won't start, possible font issue?

I was having a problem with the fonts on my PowerBook. Several fonts in my web browser were showing as gibberish. I figured out that a sub set of my times font was loading (I think it was times symbol or something like that). So I deleted my times in fontbook and left it in the trash can. The correct font loaded in my browser and all was well. Until I shut it down for a few hours. When I restarted it, it loaded up to the user login. After I entered my password, it loaded my wallpaper and just the Spotlight corner of the top tool bar. Then it just sat there. It won't finish loading. I suspect that by moving the times system font (or even part of it) into the trash, the system won't load.
I recently got a LaCie firewire external HD. I installed the SilverKeeper back-up software and ran it so everything from my PowerBook is now sitting on my ExtHD. However, I can't start the PowerBook up and I don't know how to restore from the ExtHD.
I've tried booting up from the install DVD, but it only gives me the option to reinstall or run the Disk Utility.
What I want is to boot from a CD or DVD that will let me access the PowerBook's HD and put the fonts back in the system folder. Or run a restore from the ExtHD.
I know I have an option to reinstall the software from the install DVD, but it's 10.4.0 or 1 and I have 10.4.7 on the PowerBook. Will that screw with any of my settings if I restore back to the early version and then update to 10.4.7?
And is my font theory even right? It's just the last thing I remember doing that might have caused this.
One more resource at my disposal is my Mac Mini that I'm on right now. Can I force the PowerBook to load in firewire disk mode just as a disk and not as a networked system?
Thanks in advance,
Jake

Greg, thanks for your suggestions. I did try to boot up in safe mode, but it froze on the system loading screen and never made it to login. Restarting after that just brought it back to the original problem.
I was using FontBook to locate and delete the Times symbols sub-font.
Is there a way to make a CD or DVD on my MacMini that I can use as a start up disk on the PowerBook and access the hard drive? The system installer DVD won't let me touch the HD when I boot from it.

Just did the new Windows XP update and Fireworks CS# doesnt recognize the fonts

Can anyone help me out? this affects all my previous work all the old layouts just dont recognize the font that is still installed in the system, however if I rewrite it recognizes the font. Just dont want to rewrite all the text in all my past work which is a lot.
Thank you

I got ITunes and my IPHone talking to each other again. First off my Iphone was linked with the usb cable to my iphone. Also my PC could conect with my phone and transfer files.
This may be too simplistic, but I restarted my PC with the Iphone still conected and turned on. When the startup was complete I opened ITunes. Iphone was still not recognized. Then I unpluged my Iphone and plugged it back in.
The Iphone then became visible and the auto sync started up. All Good.

System will not recognize purchased fonts

I recently updated my macintosh to OS 10.4.4 from OS 9.4 and now cannot use three sets of fonts that we purchased from adobe.com or had custom-made. I had no issue using them in OS 9, and plan to use them in Illustrator, which runs in Classic anyways. Any insight as to why the system won't recognize the fonts, even in Classic? I have the fonts in the OS 9 system folder. Thanks.

Lynmarie,
You've posted your question in the PowerBook G4 DVD discussion group, and the people who might be able to answer your question may not be reading here. If you haven't already, you might want to pose the question in an OS X or OS 9 discussion group. The main index is located at http://discussions.apple.com/index.jspa?categoryID=1

After I upgraded to Yosemite iphoto can't recognize my backup CDs which were created in iLife09. Ihave the original applications install disk and my old hard drive(I upgraded to SSD). How do I get a n iphoto back to read by old CDs?

After I upgraded to Yosemite,iPhoto can't recognize my backup CDs created in iLife 09. The applications install disk won't install iphoto because iphoto 9.5 is already installed..I updated to a SSD and have the original Hard Drive with an updated iphoto which recognized the older CDs(thanks to iphoto expander). I thought that the iphoto that transferred with the new hard drive was the same as what was on the old one. I guess it wasn't. I really need to access my backups. HELP

Later version of iPhoto write to the library on opening, and so cannot open libraries on optical media, as that cannot be written to. Further, optical media is going e way of the floppy disk. Therefore, you need to use a different form of archiving and back up going forward.
To allow iPhoto to open these libraries you need to copy them to your Mac or an attached external disk.
To merge them into an existing Library will require that you use either Aperture (if you have it) or iPhoto Library Manager.

My new MacBook Pro and Imac can't recognize my digital video camera (Canon GL2) via FireWire 800 9 pin to 4 pin cable.

My new MacBook Pro and Imac can't recognize my digital video cameras (Canon GL2 or Sony) via FireWire 800 9 pin to 4 pin cable. I've tried two different cables. Any suggestions? Thanks.

Is your DV camera plugged in to AC power (not batteries only)? When you step down from 9 pins to 4 pins, you lose the "power" pins.

Remote Disc Can't recognize Blank disc, but it does recognize other discs. I am trying to burn something from my itunes on my mac mini to a blank disc on my windows computer. What could be wrong?

Remote Disc Can't recognize Blank disc, but it does recognize other discs. I am trying to burn something from my itunes on my mac mini to a blank disc on my windows computer. What could be wrong?
I can see other discs such as music and stuff so I know I have installed it correctly but how come I can't see the blank disc that I need to burn?

You can't burn discs remotely, you can only read data discs remotely (i.e. you cannot play movie DVDs either).
Either copy the files to the remote computer or get an external drive.

Macbook can't see time capsule through airport utility; powerbook can.

This question probably applies to Airport Extremes as well as Time Capsules, but I happened to see it with a new TC.
My Time Capsule came in yesterday. My plan was to bridge it into my existing network to serve 802.11n over 5ghz. I did the initial setup using a 12" powerbook and it worked fine. I set the Time Capsule in bridge mode and for 802.11n 5ghz, plugged it into my network, and reset. The light on the TC turned green and all looked like it was working. At least, until I tried to connect through my Macbook Pro.
I installed the Airport Utility software that came with the TC, rebooted, then launched Airport Utility -- and it couldn't find any devices. It can, however, see the Airport's wireless network. After a reboot of the TC, it can also connect to the Airport's wireless network. I can get to the internet and the local network, but cannot see the Airport through Airport Utility and cannot see the Time Capsule disk. It's as if Bonjour is being blocked between my laptop and the Airport. This happens whether I'm connected to the TC wirelessly or wired.
I've tried restoring to factory defaults and starting over (I still can't see the TC, even after a hard reset) and I've tried a hard reset of the TC (I had to, actually -- it hung during startup several times). In each case, the powerbook can see it, but the macbook can't. I'm out of things to try. If I can't get this resolved soon, I'm going to have to return the TC, since it's useless if I can't access the disk.
I was planning on upgrading the two computers to Leopard over the weekend, then use the TC for Time Machine for both computers, but if it's not working for Tiger I'm worried that it won't work for Leopard, either.
Is there any variable anyone knows of that blocks a computer from seeing an base station through the Airport Utility? A non-obvious firewall setting, perhaps, or something that could be blocking Bonjour? Does Airport detection even use Bonjour, or am I on the wrong track?
Thanks

An update: I can see the Airport configuration of the TC through my Macbook if I pick File->Configure Other... on the Airport Utility, and then put in the IP address. Which leads me to believe that it's a Bonjour issue, but I haven't figured out more than that.
Of course, the TC is still useless for Time Machine if I can't get to the disk, so the problem remains.

My powerbook can't recognize a font!

Similar Messages

Maybe you are looking for