My powerbook G4 12" wont wake up after sleep anymore all the time!

Hi there
I've got a problem with my 12 " pb. quite often it wont wake up anymore after sleeping mode. I then press the "p", "r", comand, and "alt" together with the power button and usually that works. sometimes I need to do that 3 or more times untill it finally starts up again. I ran the hardware test, repaired everything I could but it still does it and I cannot figure out why.
Do you have any ideas what could cause this problem and if so what I could do to solve it?
Thank you very much

Luca:
If you leave your computer on all the time and allow it to sleep instead of shutting it down, you should completely shut it down every now and then (I do this weekly) and then start up in Safe Mode, log in, empty Trash and Restart normally and log in.
Let me know if this helps.
Cheers
cornelius
Message was edited by: cornelius

Similar Messages

  • X505-sp8915r wont wake up after sleep mode

    My laptop wont wake up after sleep mode (suspender). The laptop does everything it should like the red lights go off but when i hit the power button just the power red light goes on... The keyboard backlights if I try using it but the monitor wont show anything and the hard disc red light doesn't even blink.
    Hibernation seems to be working fine. I had to change all that will make my computer enter sleep mode to hibernate. But I would like to get that fixed. I read something about the bios and my version is "BIOS Version: V1.40. 12/04/09.

    Qosmio X505-SP8915R
    The BIOS is up to v2.2 now. It's possible that will help.
       ACPI Flash BIOS version 2.20 for Qosmio X505 (PQX33U)
    See the long thread containing Jim's message.
    -Jerry

  • TS1702 i have paid for angry birds star wars my touch wont download it it says waiting all the time iwa

    i have purchased Angry birds star wars via my desk top using my itunes account but wont allow me to put on my touch it just says waiting all the time. if i reset my ipod as long as i have backed it to my desktop will i keep all of my data from games played on it or is there another way of removing just the game it self and rebooting on to mt touch

    Downloading apps stuck on waiting...: Apple Support Communities
    Waiting applications: Apple Support Communities

  • X120e 0596 screen wont wake up after sleep mode until unplug it and remove the battery

    I recently purchased a Thinkpad X120e (0596) and am genneraly very happy with it however when it goes to sleep the screen does not wake up when the laptop does. when i wake it up i hear the fan spin up but the the screen remans powered off. ive tried waiting several minutes and it still doesnt wake up, ive also tried holding the power button for several (more than 5 ) seconds to force it to power off fully then start it again and the screen still doesnt wake up. the only way i can get it to work again is to make sure to unplug it and remove the battery for several seconds then i can get it to boot with the normaly expected complaints from windows after an abnormal shutdown.
    I have the latest updates from lenovo and microsoft installed including the latest firmware. I like the laptop so i would rather report the problem and provide any information neccisary to find a resolution than have to return it. Ive seen this problem with other laptops before and know its probably a  bug in the firmware thats not waking up the GPU is ther any tool i can use to provide the debuging info or any more direct way for me to report the bug I tried calling customer support and they told me they told me my only option was to return it and they could not report or record the issue.

    Same issue here, confirmed many times in linux, will likely recur at some point now that I am on windows (8).  The event log from the HAL says "The platform firmware has corrupted memory across the previous system power transition. Please check for updated firmware for your system" even after successful suspends, so who knows what happens when it fails. Since it's video-related, the problem could as well be in AMD's driver (also hinting at this is the fact the system periodically freezes when the screen is simply turned off from being idle).
    Also worth noting is the fact suspend seemed to work just fine on my system with the factory BIOS (1.08), with the issue appearing only in newer ones (the oldest one still available for download is already affected, and I am running the latest one). There are also slight differences in the issue between the legacy and UEFI boot modes, but none of them mitigate it.

  • PB wont wake up. Sleep light in the front is constantly on

    Hey guys, i'm having a big problem with my PB 17. It wont wake up at all from what I think is sleep. When I open the lid, or when I push the power button or even hold down the power button, the flashing blue/whiteish light stays on and never goes away. Even when I close the lid or disconnect the battery from the PB, the light still stays on. The Hard drive is off, the screen is off, its not making any noise at all. Just a nice little light on the front. Can't get anything to go.
    Any one have any ideas?
    Thanks

    Reset the PMU: it didn't work.
    Removed the list of PMU as suggested by another discussion in the form: it didn't work.
    It was just getting worse and worse that the computer fell asleep every 5 seconds.
    I took it to the Apple Store. The guy at the Genius Bar immediately said that it's due to the top case, which was exactly the same as what I found out from Google and Apple Discussions. Two days later I received the call regarding that the computer is ready to be collected. The topcase has been replaced. The computer has been working fine so far.

  • My IMac wont wake up after sleep mode

    Every morning when I want to wake my IMac from the sleep mode I have to restart it because it is impossible to open it. I tried the keyboard and the mouse but nothing works. Please help

    Zap the PRAM:  http://support.apple.com/kb/HT1379 Resetting your Mac's PRAM and NVRAM
    Mac OS X (10.6.7)
    Use Software Update or the OS 10.6.8 combo update to update your OS.  Also, update everything SU has to offer for your computer.  When done, repair permissions and restart your computer.

  • My macbook wont wake up of sleep and beeps 3 times.. why???

    My macbook pro 10.5.8 Intel Core due 2 goes to sleep and it would boot up for example in 3 hours .. but if it is more than 3 hours it wont boot up and starts to make 3 infinite beeps.. its so weird .. what can I do???
    and when I had my old battery the span was like 1 hour .. i bought a new one like 4 days ago and I thought that would resolve the problem

    According to this Apple article 3 beeps means no good banks.
    It's possible your RAM just needs to be reset (it's loose).
    DALE

  • Powerbook G4 won't wake up from sleep

    My 4 1/2 year old powerbook G4 won't wake up from sleep anymore. After I close the lid, or even manually put it to sleep, I can still hear the HD run. The backlight on the top of the lid never lights up and when I open the lid the blank screen doesn't do anything. The only way for me to work around this issue is to power down the laptop and start it up again. Since I've been having this issue every program that I use take forever to load. The spinning color wheel is the bane of my existence! I tried resetting the PRAM, I used Onyx to repair file permissions, and am out of ideas. Any help would be greatly appreciated.

    How incredibly strange. I am having exactly the same problems with my computer. I just started the same behavior today. I have tried using MacJanitor, repaired permissions, verified disk, but it still will not go to sleep properly. S.M.A.R.T status is verified
    I have tested my RAM as described above with no problems surfacing. Anyone else have any ideas that we can try. When I get home on Sunday I will try some more intense investigative tools including re-installing OSX 10.5
    By the way, I am running 10.5.4 on a 15" 1.5Ghz G4 Powerbook with 1.25GB of RAM and 28.9GB harddrive free.
    Another strange thing I have also observed is that it now takes 10 minutes to start up. 5 minutes on the Apple screen with pinwheel, and then 5 minutes with the blue screen before the cursor appears. After that point startup is normal. Also, even though Disk Utility shows 28 GB free on my harddrive when I try to copy something, it says that I do not have enough free space on my harddrive.
    Do you suppose this means that my harddrive is on the way out? Is this also the case of the original poster?

  • MacBook Air won't wake up after sleep

    I've been reporting sleep problems with my iMac for a while in the past. No-one here would take it seriously (probably hardware, your reports are incidents, no-one else has these problems) so I just went away and I disabled the sleep function of my iMac alltogether, and I won't select the "sleep" button in the login screen anymore, or select "sleep" from the apple menu. No sleep no problem, right?
    *Well, I bought a Macbook Air three days ago, and in those three days I have had TWO occasions already where I wanted to wake the Macbook after sleep* (closed lid) and it wouldn't wake up. All I get is the rainbow mouse pointer and the Macbook is unusable unless I reboot it.
    Mind you, nothing is connected to the macbook but the power cable, and I find it hard to believe that my Macbook Air would also suffer from 'hardware problems' like my iMac alledgedly is.
    In all my time using OSX 10.4 on my 17" PowerPC MacBook pro I have never had any problems, but since switching to Intel Macs with 10.5 I have these "sleep" problems all the time.
    What gives, and can I expect Apple to do anything about this problem that I've been having since I bought my iMac more than a year ago, and is now also spoiling my MacBook Air experience?

    I have a Macbook Air and it also frequently (6 times out of 10) will not wake from sleep mode, only way to revive it is to hold down power button for 10 secs and force a restart. VERY FRUSTRATING!
    I also occasionally use an external Apple 24' Screen (Non LED) and find that the MBAir will often freeze when you plug that into it or unplug it from it.. Perhaps I have a hardware fault on the MB Air? Or will this be fixed in software?

  • Computer won't wake up after sleep

    I've been reporting sleep problems with my iMac for a while in the past. No-one here would take it seriously (probably hardware, your reports are incidents, no-one else has these problems) so I just went away and I disabled the sleep function of my iMac alltogether, and I won't select the "sleep" button in the login screen anymore, or select "sleep" from the apple menu. No sleep no problem, right?
    Well, I bought a Macbook Air three days ago, and in those three days I have had TWO occasions already where I wanted to wake the Macbook after sleep (closed lid) and it wouldn't wake up. All I get is the rainbow mouse pointer and the Macbook is unusable unless I reboot it.
    Mind you, nothing is connected to the macbook but the power cable, and I find it hard to believe that my Macbook Air would also suffer from 'hardware problems' like my iMac alledgedly is.
    In all my time using OSX 10.4 on my 17" PowerPC MacBook pro I have never had any problems, but since switching to Intel Macs with 10.5 I have these "sleep" problems all the time.
    What gives, and can I expect Apple to do anything about this problem that I've been having since I bought my iMac more than a year ago, and is now also spoiling my MacBook Air experience?

    I have solved my sleep issue with some help from this forum. Intel iMac 20 and 24. Leopard.
    1. Repair Disk Permissions with Disk Utility.
    2. Download 10.5.6 Combo: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1056comboupdate .html
    3. Reboot, and install Combo.
    4. Shutdown. Unplug all Firewire and USB connections, and iMac power cord. Wait 5mins.
    5. Re-attach iMac power cord only, and reboot.
    6. Optional. Run a day or so without Firewire and USB items to see if sleep allows waking after overnite sleeps.
    I strongly suspect the Firewire controller is the suspect.

  • My macbook pro doesn't wake up after sleep

    my macbook pro doesn't wake up after sleep

    I'm having the same issue. I've had my logic board replaced twice now, which I did last week and then Monday I had to take it to a Genius Bar again because my hard drive cable was malfunctioning. I don't know why it's happening but I'm really starting to get frustrated with my machine. I bought my MacBook Pro brand new last year in September and ever since I've dropped it in November, it's been really glitchy. After I dropped it, I had to replace my Logic board, graphics card, and hard drive and they covered it.

  • MacBook wont wake up after installing 10.5.7

    Hi
    My MacBook wont wake up after installing 10.5.7. Have to reboot.
    Any ideas gratefully received.

    Have you checked if your machine's firmware is up to date?
    Have you run the hardware test that came with your computer?

  • MacBook wont wake up after I open the lid

    It has been a persisting (and boring) issue. My MacBook wont wake up after I open the lid. I try closing and opening it lots of times but the screen stays black - it doesnt display the user login screen. Anyone has ever experienced this kind of issue, knows what causes it or has a fix for this bug?

    Try resetting the SMC:
    http://support.apple.com/kb/HT3964

  • Wont wake up after update to 10.8.2

    Wont wake up after upgrade to 10.8.2

    I've seen many posts on this issue which apparently appears after the 10.8.2 update.
    First try a SMC reset.
    Then do a Disk Repair
    Then download and install the 10.8.2 Combo update.
    You can install it right over the Delta update you recently installed with no issues.
    DALE

  • PC wont wake up from sleep

    MY HP wont wake up after its been asleep.
    A few times while typing up a legal documents Ive had the following message ......." Your PC ran into a problem .This problem caused your pC to restart."
    AND once I was half way through drafting up legal submissions in word and it said it had to restart to repair drive errors
    and once when i tried to start it i got " the system BIOS is being recovered"
    I think theres something majorly wrong with this Im on HP 500 PC series Model 500 - 007a its a desktop, can anyone offer me some advice
    {Content Removed}

    Hello!
    Thank you for posting in HP support forums and thank you for your trust in HP.
    I am sorry about the issue you experience.
    I suspect your computer's hardware might be faulty.
    I think you mean BSOD - blue screen of death or something like >this<
    This is safety mechanism. By default when Windows encounters BSOD, it copies the memory to the so called memory dump files. They can be useful to analyze the issue.
    Please, go to Control Panel -> System -> System Protection -> "Advanced" tab
    Follow >these instructions< and configure the system to generate Kernel dump files. 
    Once ready, repeat the BSOD.
    When you next start Windows, a file with this location
    %SystemRoot%\MEMORY.DMP
    should have been generated. Usually this is C:\Windows\memory.dmp
    When you are ready, please let me know and I will provide you a way to submit this file to me so that I analyze it and see what I can see from it, what the issue is.
    Please, also test your HDD and RAM from BIOS:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00439024&cc=bg&dlc=en&lc=en
    http://h10010.www1.hp.com/ewfrf/wc/document?cc=bg&lc=en&dlc=en&docname=c02097000
    Thank you! Let me know when you are ready
    Please, let me know if I can help you further and don't hesitate to ask for assistance if you face issues.
    *** Please click the white KUDOS star (on the left). This way you show appreciation for advice or help you received.  If your problem has been solved - click the appropriate button and accept the solution. ***
    Best wishes,
    IT_WinSec
    Hewlett-Packard employee | HP Enterprise Services
    Although I work for HP, I express my personal opinion.
    Visit www.hp.com/makeitmatter
    --Say "Thanks" by clicking the Kudos Thumb Up in the post that you find useful.
    --Please mark the post that solves your problem as "Accepted Solution"

Maybe you are looking for

  • Wrong data type when writing XML file

    We are trying to write an XML file from ODI but we get the following error: ODI-1217: Fallo de la sesión CMT_PAQ_CREA_XML (15001) con código de retorno 8000. ODI-1226: Fallo en el paso WRITE_XML_SCHEMA después de 1 intento(s). ODI-1232: Fallo en la e

  • Need to test something on Tiger

    Hi all, I have OSX installed on the Macbook but it has some issues with the wireless so I would like to try and run 10.4. Is it possible to connect my external HDD to the Macbook's USB and install 10.4 to it? If so, how do I then boot in to 10.4? Tha

  • Using HD Footage in SD Project

    I have an old SD project for a set of video instructions that needs to be updated. Most of the old SD footage is still good, but I do need to reshoot a few scenes at the moment. I'd like to shoot the new stuff in HD and mix it in with the old SD foot

  • URGENT - Modifying Form Properties in APEX

    Hi, I am migrating 6i Forms to APEX and facing an issue with change of properties for Database Block Items. My Issue is: - In form 6i Item associated with DB block is not a database item whereas after uploading the converted fmb xml to APEX it is dis

  • Restrict window size reduction up to a certain size

    Hi, I didn't know how to search for this, hence sorry if it has been answered before. My question is not about window resizing which is easy via setResizable() method. I 've noticed that some complex dialog boxes do not allow to descrease their size