My Powerpoint presintation doesn't play right in Keynote.

I created a powerpoint presintaion with 250 slides, each with a photo on it. I have already added some songs but when I went to add a new one from iTunes it was in m4p format, which I couldn't get powerpoint to insert. So, I opened the presintation in Keynote, since it would take the new song. But, when I tried playing the presintaion in keynote the timings of all of the songs that were already in there were messed-up and the desolve slide transition that I had used between every slide was now a fade transiton. Is there anything I can do to make it run proporly?

I Have tried and still don't work

Similar Messages

  • My video playback out...every video shakes/flashes/doesn't play right. What's wrong? I thought the hard drive was too full, but I just deleted 125gigs, rebooted and it still flashes and doesn't play videos. This is true for youtube, ads, foxnews videos...

    My video playback out...every video shakes/flashes/doesn't play right. What's wrong? I thought the hard drive was too full, but I just deleted 125gigs, rebooted and it still flashes and doesn't play videos. This is true for youtube, ads, foxnews videos...

    Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
    Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
    So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
    If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
    All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
    Is there an easier way?

  • Song doesn't play right

    Just one out of over a thousand songs does not play right anymore. It is almost as though it is skipping, and jolts in slower than the actual pace of the song. The song was purchased from the iTunes store quite some time ago, and just recently stopped working. I have updated to the latest version of iTunes, and it still does not play right.

    I have the same problem. I purchased a song off iTunes over two years ago and for the past month the song has played so roughly that it's unbearable to listen to. This problem may coincide with the recent iTunes update to the most recent version. Please answer this question before I begin to think Apple wanted old songs to play improperly to force the listener to re-purchase.
    Thanks!

  • Plays fine in IMOVIE and IDVD but disk doesn't play right in home DVD Playe

    I created a movie in IMovie and it plays fine there. I converted it to IDVD and it plays fine there, but when I burn the actual DVD, it takes 12 hours! and then it won't play on my home DVD player. (It starts out fine, shows the menu and has the movie, but halfway through it freezes. Or if I try to fast forward to skip to the next chapter it freezes.
    I tried upgrading my Superdrive to the new Pioneer 111D (it was suggested to me that my older 103 was not compatible with Panther) and still the same problem.
    I am noticing now that when I go to check my system profiler, it's now saying for the new Pioneer 111D that "disc burning is NOT supported".
    I'm in the midst of a project and feeling pretty screwed. HELP!

    First of all, I'm appreciating all the responses and help. This is a serious concern for me which I need to find a solution for asap.
    As far as the media itself... the discs are TDK DVD- and I've ruined about 4 or 5 of them... each having the same problem...taking 12 hours to burn they play for awhile on a commercial DVD player then freezes up about 2/3rds the way through (unless you try to scan through, in which case it freezes up on the spot.) There are a total of 3 scenes... and the 3rd scene doesn't happen at all in the final burned disc. So, J.Keller, as much as I'd love to blame the media I don't think I can. But it's certainly a reasonable explanation.
    Karsten, I have to tell you the thought that it might actually take LONGER to butn this disc is painful. It's actually only 45 minutes or so of material. But if I knew that it would take 24 hours but it would work perfectly I'd go for it! I will download the patch you recommend to see if it offers a workaround solution.
    But I'm still perplexed that in the SYSTEM PROFILER for the Pioneer 111D it says that "burning is NOT supported". Should I be concerned about this?
    At this point I'll try just about anything. So if J Keller thinks that by waving a dead chicken over my head while singing dixie would help create a workable DVD so I can finish this project for my boss, I'd give it a try.
    Any other thoughts? I really appreciating the insights and suggestions.

  • Audio doesn't play right in transitions

    So I have 2 clips that i'm trying to put an overlap in between.It inserts fine, but when i play it the audio in the transition is the audio from a clip that's at the beginning of the video. Every transition is like this and I have no clue what to do, suggestions?
    Macbook Pro   Mac OS X (10.4.9)  

    "..ANy idea what's causing this?.."
    Yes, it's reading the audio from a "cache" ..a bit of memory where it's stored what it played previously. Same as when you preview a transition: it uses its memory cache to give an idea of what the transition will look like between clips. One or more of the clips which it uses in the 'preview' may be different from the clips which you're intending to apply the transition to.
    Tides are caused by the proximity of the moon and sun to the earth. It's a glitch. The Supreme Being inadvertently forgot to keep the moon and sun at right angles to each other ..a programming error.
    Don't worry; it'll be corrected in the next version of the Universe. (Except that water may be accidentally reformulated as H2O2.)

  • Imported PowerPoint Slide doesn't look right

    I read Captivate 3.0 help and learned it can't
    handle PowerPoint 2007 files, so I saved my PowerPoint slideshow to
    1997-2003 compatibility mode. One of the slides has tables with
    headings, and Captivate 3.0 does strange things when I import
    it--like change the font sizes of the headings and insert bullets
    into every box in the table. The result is unreadable and
    unfixable. This table took me a long time to make. Is there anyway
    possible for Captivate 3.0 to import it so that it looks the same
    way it does in PowerPoint? I know that to do something with themes
    in PowerPoint creates problems in Captivate, so you should know
    that I didn't use themes in creating this slideshow. Any help you
    can provide will be greatly appreciated.

    Hello Fikenhild,
    This might just be a limitation with the way the PPT
    importing engine currently works. I would recommend that you submit
    this as a bug using the
    Adobe
    Captivate Feature Request/Bug Report Form
    In order to capture the screen I would suggest that you
    record this using Adobe Captivate - using the steps I have outlined
    below:
    1. Open your MS PowerPoint file (I only have PowerPoint 2003)
    2. Chose Slide Show > Set up Slide Show...
    3. Choose the Show type Browsed by an individual window
    (disable the show scrollbar)
    4. Click OK.
    5. View the Show
    6. In Adobe Captivate choose Record or create a new project
    7. Select Custom size.
    8. Specify your project size
    9. Position your PowerPoint Show window within the recording
    area
    10. Capture your screens.
    HTH
    Regards - Mark

  • Safari on Snow Leopard doesn't play right with multimedia on WordPress

    I have a problem when I insert a QuickTime movie or Flash graphic into a WordPress post. The problem is that the CSS drop-down menu on the post page fall 'behind' the QuickTime movie instead of in front.
    To combat this I inserted the following embed codes in the html for the movie: <param name="wmode" value="transparent"> and wmode="transparent"
    This would appear to fix the drop-down problem but it creates a new problem for Safari on Snow Leopard for Macs. The QuickTime controls don't work on the movies. You can start/stop the movie by using the spacebar but the transparent layer kills access to the controls when either QuickTime X or QuickTime 7.x is used in Safari. Seems to work fine in Firefox.
    It might be easier to show the problem via examples which follow:
    No transparency code example
    http://www.hawaii247.org/2009/11/06/community-pays-tribute-and-honors-uncle-geor ge-naope/
    transparency code embedded example
    http://www.hawaii247.org/2009/10/29/rallying-in-hilo-for-the-international-day-o f-climate-action/
    Is there a away around the drop-down bug so I don't have to use the transparency embed code? The drop-down bug also occurs in IE8 I believe. If you choose the Sports drop-down you should see what I'm talking about in the first example.

    Yep. Exactly as you describe.
    Since your menu "drop downs" are the source of the original issue have you considered breaking the "long" one into "two" parts?

  • Youtube has stop working properly, just goes to the end and doesn't play. Firefox ver. 30.0

    I've been using Youtube fine for years in Firefox but all of a sudden yesterday videos doesn't play right from Youtube in Firefox. The video tries to load for a bit then just goes to the end and if I click the play button it's stuck in endless loading.
    It seems to be only a Youtube plus Firefox related problem. Dailymotion and other flash videos from other websites loads right and I can load Youtube videos in Internet Explorer just fine.
    I've tried many methods in the search related threads here in the support section and they were of no help. I've uninstalled and reinstall Flash multiple times. I'm truly lost now on what to do here. I would like to continue using Firefox as my main browser.

    Hello,
    Some problems with Flash video playback can be resolved by disabling hardware acceleration in your Flash Player settings. (See [[Flash Plugin - Keep it up to date and troubleshoot problems|this article]] for more information on using the Flash plugin in Firefox).
    To disable hardware acceleration in Flash Player:
    #Go to this [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues Adobe Flash Player Help page].
    #Right-click on the Flash Player logo on that page.
    #Click on '''Settings''' in the context menu. The Adobe Flash Player Settings screen will open.
    # Click on the icon at the bottom-left of the Adobe Flash Player Settings window to open the Display panel. <br/> <br/>[[Image:fpSettings1.PNG]] <br/>
    # Remove the check mark from '''Enable hardware acceleration'''.
    # Click '''Close''' to close the Adobe Flash Player Settings Window.
    # Restart Firefox.
    This [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash Player Help - Display Settings page] has more information on Flash Player hardware acceleration, if you're interested.
    Does this solve the problem? Let us know.

  • Aggregator project doesn't play content well

    Good morning,
    I created eight separate projects which I combined into an aggregator project called "Video Tutorials".  I published the aggregator project into a zip file so that I can send it to our IT department.  They downloaded the zip file and uploaded the main link ("Video Tutorials.swf") onto our website.  All eight videos play but all visual elements such as buttons, captions, don't appear.  I only see the video I captured and hear the audio.
    What could be the issue?
    Many thanks in advance for your help.
    Vincent

    The IT department uploaded all files and linked the HTML and not SWF and it still doesn't play right. 
    I also noticed that there is a "loading" symbol in the middle of each page (see screenshot below).
    We also tried to link a PDF.  It does load, but because the file is "large" (only 60 MB), it doesn't show the entire screen (see second screenshots). 
    What should we try?

  • I have a powerpoint presentation with music which works fine when played through my macbook onto tv, but want to save the presentation to dvd.  Music doesn't play - presently saved as wav.  Anything i can do - have tried through idvd.

    I have a powerpoint presentation with music which works fine when played through my macbook onto tv, but want to save the presentation to dvd.  Music doesn't play - presently saved as wav.  Anything i can do - have tried through idvd.

    Hi
    Please describe How You go from PPT to iDVD. Via iMovie ?
    If so - then convert Your .wma file to .aiff (same kHz) and use this in iMovie instead. (no .mp3 either)
    Yours Bengt W

  • IOS5 Music doesn't play the right songs!

    Newly upgraded, and when I use what used to be called iPod (now Music) the list of songs shows, but tapping certain songs doesn't play them, it plays either nothing at all, or the wrong song. Very chaotic!

    The database files on the iPad have probably become corrupted. You will have to remove the songs from the iPad and re-sync them from iTunes to re-write a fresh database file. It can easily be done by unchecking "Sync Music" in the iPad's sync settings in iTunes, sync then re-check it.

  • ITunes doesn't play wavs made on PC

    I have backed up a number of PC files on a DVD and tried to put them on my iPod shuffle, using iTunes on my MacPro, when I realized that iTunes doesn't play them, so I can't put them on the shuffle. However, those wav files play alright in Quicktime on my Mac. Why not also on iTunes? Is there something that I have to enable, or some sort of conversion that I must do?
    The files seem to load in the playlist, then they show in both the playlist and the Music folder. The files seem to be there, for when I Ctrl+click > Get info, within iTunes, it shows their size, sample rate, etc. It's just that they won't play.
    Any suggestion will be much appreciated.
    Message was edited by: aeneas12

    Yes, I have played almost endless numbers of WAVs in iTunes. These files have been created with foobar2000, PlexTools Professional, and EAC for the most part.
    My PC is switched off right now so I can't play with NMP WAV files and iTunes, but I still think that if you simply use another program to reconvert the problematic files to WAV format again (a lossless process) with known good settings, the files will likely play in iTunes.
    Also, it may be that NMP has created "floating point" vs. "fixed point" WAVs, and that would cause problems with iTunes.

  • 1st song on all my cds breaks up or doesn't play

    All the others songs work perfectly, but the first makes crackling sounds, or doesn't play for like 10 secs or a minute. When it starts playing, and I drag the timer back to the start of the song it works fine, but it nevers works if I just double click the song. Any ideas?

    MrDew,
    Let's start with this knowledge base article,
    iTunes for Windows: Songs and other audio don't sound right
    Sometimes it's just an audio driver problem.
    If that doesn't help, I need more information about your hardware configuration. Please run the iTunes Help menu -> Run CD diagnostics and post the output here.

  • 2 of my movies are no longer working in my iTunes or on my iPod Touch, One doesn't play at all and the other gets to about 29:00 than stops working and I don't want to buy them again. What's happening?

    2 of my movies are no longer working in my iTunes or on my iPod Touch, One doesn't play at all and the other gets to about 29:00 than stops working and I don't want to buy them again. Then also when I added a non-iTunes movie and tried to have iTunes make an iPod/IPhone version it gave me error -4. What's happening to my movies?

    I also have to add that the right earbud only doesn't work on my phone while i'm listening to music. If I'm face timing it's okay. what the heck.

  • IDVD problem burning and multiplexing - gets stuck but ejects the DVD and the DVD doesn't play

    I am having trouble burning DVDs.  Everything seems to be working fine during the iDVD project creation.  I can watch the movie and select scenes within iDVD.  Then, when I go to burn the DVD, it gets stuck at the burning/multiplexing stage - the wheel just keeps spinning and says there is about a minute left.  Yet it ejects the DVD and the DVD won't play when inserted into a DVD player.  It will show the intro and the scene selection pages but when you click on one of the scenes, it gets stuck and doesn't play.  I have already uninstalled and reinstalled iDVD.  The problem persists.  It seems like the burner itself is the problem.  What can I do to fix it?  I have Mac OS X Version 10.6.8 with a 2.8 GHzintel Core 2 Duo and iDVD version 7.0.4.

    Hi
    Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
    So first - turn on TV-Safe area and move any object well inside of this.
    Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
    Now my long long list on Multiplex Error
    LONG LONG LONG LIST
    Multiplexing Error
    PART One.
    Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
    I only use.
    Video - StreamingDV (miniDV tape via FireWire) and
    Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
    Photo - .jpg (.bmp known problematic)
    Chapters !
    A.    Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
    as described by Donnyboy69.  Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
    B.    Location of Chapters
    • Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
    • Not in a transition (or within 2-3 seconds from it)
    Important when from iMovie HD6 or previous - Now also observed when using FCE 4
    PART Two.
    from Robert Modero.
    "Multiplexing Error. Problem during initialization of tracks"
    Simply remember to add subtitles to your Quicktime files and menu buttons.
    Once I did that, I was back in business.
    from Boise Jim
    Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
    I always makes a DiskImage first and test this so that it runs OK
    I use only - Verbatim DVDs
    I use only - DVD-R
    I burn at an as slow speed possibly e.g. x1
    This gives good DVDs
    PART Three.
    Multiplex Error
    Chuck, Chicago 2/7/2009.
    Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
    2. Disconnect any other external devices not absolutely needed.
    e.g. external USB/USB2 hard disks, other FW hard disks etc.
    3 Chapter marks in transitions - minimum 2 sec from
    FROM Bev.
    (Not a 'guy' but I will answer!)
    First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
    Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
    Also, choose a slower burn speed, 4x or less.
    Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
    From. Boise, Idaho
    I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
    It worked, and I got a clean burn from iDVD.
    Hopefully this can help other people.
    by dheb0422
    Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
    One user more writes
    To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
    Video from both passed from FCE 4.01 with chapters
    One project worked fine in creating disk image file
    The other gave Multiplex Errors
    I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
    Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
    Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
    This time multiplex errors gone
    So had something to do with chapters
    So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
    After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
    That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
    When I removed "bad" chapter mark (and others in), no multiplex error
    As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
    I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
    Rich839
    In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
    Russ One - suggest this
    Multiplex Error-There was an error during muxing preparation
    One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
    Summary - What to try
    1. Chapters
    • Only A to Z and 0 to 9 in chapter title
    • No Chapter mark at very beginning of movie
    • No Chapter mark in or within 2 seconds from any transition in movie
    2. TV-safe area for buttons (no one outside this)
    3. Safe re-boot
    4. No other external devices connected - that are not needed
    SDMacuser adds to this
    • On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
    Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
    5. Minimum of 25Gb free space on Start-up hard disk
    6. Make a DiskImage first - reduces where problem originates
    7. Trash iDVD pref. file
    8. Make a new iDVD project
    9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
    10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
    Yours Bengt W

Maybe you are looking for