My powershot sx20is intermittently gives the following message --- lens error, restart camera.
Sometimes on start up, the telephoto lens opens and the moves back and forth several times then stopping with the lens error message. After I restart the camera several times, the lens may operate. Often when the lens error message is given, the lens has not closed properly and comes to rest outside its normal closed position. Can this be fixed? I tried camera reset. Now camera reset on menu is faded out.
It sounds like there may be a mechanical problem with the lens. It could be that some dirt got on the lens barrel and is preventing proper operation of the lens, or the zoom motor may be going bad, or the gear is worn out. There is also the possibility that the lens might be out of alignment. All of these can be expensive repairs, but if its dirt on the lens barrel, you might be able to clean that up by using an index card to gently see if there is any grit that's keeping the lens from functioning. Just insert the corner of the card a little bit in the space around the lens barrel and gently circle the lens. Be careful not to force anything into the body of the camera when doing this. If you are lucky, you will get any dirt out and free up the lens. Since the camera is basically from the end of 2009, the cost to repair it might be more than its' worth.
Steve M.
Similar Messages
-
I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document “Tina-19.jpg” could not be opened. Photoshop cannot open files in the “Adobe Photoshop JPEG file” format.
What does this mean? I have opened my photos in Adobe Photoshop for years and suddenly I get this message and can't open any of my picturesJoeLib wrote:
You type way faster than me Gene.
Well, not necessarily in this case.
According to the time stamp, Gene posted his answer a bit over three hours before you did, Joe.
Gene's post: Dec 29, 2014 5:54 PM
Joe's post: Dec 29, 2014 8:57 PM -
Hello - my safari on my ipad2 gives the following message "safari could not open the page because the server stopped responding"...email works fine and I can download from the app store...seems to just be a safari issue
Marc-
The Safari message is probably telling the truth. Is the problem repeatable at several websites, or is it only with a particular one? If all websites, you may have trouble with your internet connection downloading large amounts of data. Mail messages are relatively small unless there are attachments or embedded images.
Fred -
The dropdown menu from the Creative Cloud icon on the menu bar keeps giving me the following message: "Download Error" I quit and restarted the creative cloud app to no avail. Running Mavericks on a mid 2011 iMac.
Try below steps once
click Gear icon on the top Right corner and Quit Creative Cloud App
Click on Finder and then hold Command + Shift + G keys on your keypad
It will open Go to folder window, type exactly ~/Library and click on Go
Make sure to open ~/Library not /Library ( there will be two Library folders )
Then open Application Support > Adobe folders
Trash AAMUpdater and OOBE folders.
Then launch Creative Could and check. -
I keep getting the following message:
Runtime Error...Microsoft Visual C++ Runtime Library Program C:\Program Files\iTunes\iTunes.exe
R6034 An application has made an attempt to load the C runtime library incorrectly and can't open iTunes now.
Please could someone help with this query as I am at a loss as to why this problem is now occurring? Thank you.Check the user tip below.
https://discussions.apple.com/docs/DOC-6562 -
i can't send an e-mail from thunderbird, it was working well though , suddenly it says the following message:An error occurred while sending mail. The mail server responded An error occurred while sending mail. The mail server responded: (Alis-MacBook-Air.local) [46.138.187.135]:51054 is currently not permitted
OR
i have changed the port from 587 to 465 but still cannot send e-mail, it keep sending and sending for 5 minutes and respond is time out?Can you post your Troubleshooting Information?
Help (Alt-H) - Troubleshooting Information -
When I try to open ITUNES I get the following messages: Runtime Error R6034 - "An application has made an attempt to load the C runtime library incorrectly" . I have 15,000 songs in my library. Will I lose them if I uninstall as suggested by Apple??
Exactly the same problem. But it gets worse. iTunes has now disappeared from my list of installed programs so I can't uninstall anyway. Appalling problem. This update clearly didn't get proper testing before release.
In answer to your question about your song library, I seem to remember uninstalling and reinstalling iTunes a few years ago and the uninstall didn't remove the library then - I can't see why it would. Of course there have been a lot of updates since then, so it is definitely worth asking the question. Personally, I would be inclined to make a copy (if you have the space) of the iTunes folder just to be sure.
I certainly hope they get this fixed soon. I use iTunes mainly for podcasts on my iPod and I can't download anything right now. -
Hi , in the Creative Cloud panel under "APP" i have the following message "download error". What I have to do? Also if I click on "reload application"...the error is still there
Sorry I can not understand what I have to do. Could you please explain me what I have to do?
Messaggio originale----
Da: [email protected]
Data: 02/01/2015 11.01
A: "Francesco Mazzetta"<[email protected]>
Ogg: Hi , in the Creative Cloud panel under "APP" i have the following message "download error". What I have to do?
Hi , in the Creative Cloud panel under "APP" i have the following message "download error". What I have to do?
created by Mylenium in Creative Cloud Download & Install - View the full discussion
Troubleshoot Creative Cloud download and install issues
Mylenium
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7059129#7059129 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7059129#7059129
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Creative Cloud Download & Install by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
can't download book. Get the following message. "Error getting license server communication problem MW_ADEPT_CORE_EXPIRED" I have no faith in this type of communication because I have never recieved answers from forums/ wish you could afford a live person
I select a book to read from my library it takes me to digital editions and this message comes up. Has been working for a couple of years but something has happened, maybe I did it but don't and to make it worse there is no one to contact to fix it. Get the following message. "Error getting license server communication problem MW_ADEPT_CORE_EXPIRED" I
-
When the Adobe Application Manager will open the following message: Download error. What should I do
When the Adobe Application Manager will open the following message: Download error. What should I do
is the error some gibberish like : UW44PKU or some code similar to that?
i think the code is U44M1P7.
if this is what happens i think i know what to do, that is if you already have PSCS6 (permanent license) version on you risk before you joined cc.
vince
Message was edited by: vinsolo -
When saving iDVD to disk image the following message appears: "Error during rendering/codification. There was an error during rendering/codification of menus/slide presentation. The recording process was canceled.
What am I doing wrong?Read and answer the questions posted by Bengt Wärleby in this thread: Cant burn my idvd project to...: Apple Support Communities
OT -
After upgrading to firefox 4, everytime I open the program, I get the following message, "TYPE ERROR:conponentclasses undefined." How do I correct this?
That indicates that you are using an add-on that is not compatible with Firefox 4. For details of how to troubleshoot this to find out what one is causing the problem see https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
-
What can I do after receiving the following message: "An error occurred while contacting the radio tuning service. Check your internet connection, or try again later".
I have received this message the last 3 days, is itune radio down or am I the only one experiencing this type of problem?
Need help.
Thanks
Sam3Ok.. Apparently it's not just me
Apple needs to make a statement or something on this issue. I'm running Lion OS X 10.7.3 -
I have a Mac Book Pro 2.4 GHz Intel Core i7; Memory 4 GB 1333 MHz DDR3
Mac OS X Version 10.7.5
I updated to iTunes 12.0.1.26 and I am trying to burn a playlist and I get the following message: "Disc burner or software not found" . I have burned lots of CD's and DVD's before and this is the first time I get this message and cannot burn anything. Can anybody help me, please?Hello queenabs,
It sounds like you are trying to burn a playlist to a disc in iTunes, but you are getting the error, "disc burner or software not found." I found a couple of resources that I think might help with an error like this.
I recommend starting with the steps in this article:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
http://support.apple.com/kb/TS2308
If you are still having trouble with burning a disc after following the steps in that article, I recommend following the steps in this article:
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.comI have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?
Maybe you are looking for
-
More than one name with the same email
Hello there! I have an account with skype that i use frequently and once i forgot my password and got the link on my email. when i tried to log in and change password i found out that i have three names and i don't want them all, so how can i delete
-
Crystal Reports 9 Save/Save As Buttons Not Responding
I'm trying to install Crystal Reports 9 on my laptop. The installation process itself goes well but yet when I create a new report and click either the Save or Save As buttons, absolutely nothing happens. No dialogue box pops up so I'm unable to Sa
-
Javascript Menus not Working in version 2.0 per &SESSION. not interpreted
Hi. <br> I had an application in HTMLDB 1.6 and I built javascript cascading menus using the syntax:<br> <\a href="http://myserver.com:7777/pls/htmldb/f?p=104:13:">Expense Accounts</a\> (backslashes added to prevent this from displaying as link) And
-
I have to verify the signature of files, the signature is included in an XML file generated throw C# .Net. The public key is also extracted from the XML file. Every time I want to verify a file it returns false, I'd like to know if my code is correct
-
Libefi.so.1: version `SUNWprivate_1.1' not found error
Hello All, I am trying ot hook up some USB storage devices to a Sol 10 box. The USB is recognized and I want now to format and partition it. I am attempting to use rmformat to do this, but get the following error immediately after typing the command.