My PowerShot SX260 HS stops video recording prematurely. Why?

My PowerShot SX260 HS stops video recording prematurely.  The elapsed time turns red for a few seconds then it stops recording.  This usually happens around the 16 min. mark on 1080p video.  I just bought a faster Class 10 Ultra SDXC memory card rated for HD video.  It did not help at all.  I also tried low level formatting the card.  How can I record longer videos?

I am having a similar problem. This has happened to me and I have NO CLUE why. I am not sure for how long we were recording a video scene for something (my cousin and I were making a video with my Powershot camera). This thing suddenly stops working and then it did not let me record anything else. Why?
However, I need to know if this solution will prevent this problem from happening. I managed to delete one video scene and it lets me record videos, HOWEVER, I have an 8 GB SD card and this is what's more confusing: The camera screen is labeled 1' 17" remaining. What does that mean? Does this message mean that at some point, the camera will stop recording stuff?

Similar Messages

  • When recording a Video demo slide in Captivate 8, pressing the [END] key takes more than a minute to stop the recording. Why is there such a lag?

    When recording a Video demo slide in Captivate 8, pressing the [END] key takes more than a minute to stop the recording. Why is there such a lag? Additionally, the software I record experiences terrible lag times. For instance, It may take 15 seconds to display a 2-digit number I typed into a blank field. the same software has no lag issues when I'm not recording it.

    Yes and no. The CPTX file is on my PC. Our software that I'm making the demo of is on the network. but I'm not the "IT Guy" so I can't provide specifics; however, I work at a computer software company and we probably have more servers than employees. The network hardware is kept current. I've been making similar tutorials for 10 years and haven't run into this issue until switching to the subscription Captivate.

  • Cannot stop video recording

    The stop button for videoing doesn't work! I can't stop any recording.
    Any ideas?

    Close the app.  Restart the device.  Open the app again and test the issue.

  • Quicktime error stops video recording

    I am receiving a Quicktime Error:
    "recording stopped because the maximum duration for the file has been reached" Try continuing recording in a new file.
    Then it shuts the camcorder off.
    Thanks in advance for any assistance.
    Mark

    I am also having this same issue. I get the error in Quicktime Pro: "Recording stopped because the maximum duration for the file has been reached. Try continuing recording in a new file."
    I called Apple support and they were not able to help but in talking with them I figured out what might be the problem. Often there are some breaks in the data being transmitted across firewire because there was a drop out in the tape. I believe that this is the problem because I would keep getting the error in the same part of the tape. There is no timecode break so if I capture in Final Cut Pro, I get two files instead of one but I at least can record the whole thing without stopping. The reason I want to use Quicktime is to record at a smaller screen size.
    My work around is buy better tapes! Or to play the video past the problem area (this may mean losing some video) and start a new recording. Alternatively, use final cut pro to do your recording. If you use iMovie and want to adjust the volume, you may need to use a mixer and a digital converter box to do it all in one shot. Doing it this way you may lose some video quality as well.
    Good luck everyone. I hope this helps.

  • Quicktime 7 Error Stops Video Recording ( 7,900 VIEWS ) Locked???

    https://discussions.apple.com/thread/1704655?start=0&tstart=0
    I am having a terrible time with Quicktime 7 and it's automatic stopping of a recording during recording.
    Apple locked the posts that are years old .. but still the problem persists.
    I am trying to transfer a simple VHS in high quality .. and can't find a way.
    Anyone have a solution?

    I found a app called Vidi for Formac Firewire DV converters. It may work with others .. but it solved my issue of the recording stoppinng due to poor VHS quality or breaks in the video.

  • Presenter video recording from PowerPoint has stopped working

    My Adobe Presenter 9.02 Build 173 has suddenly developed a problem where recording video from within PowerPoint has stopped working. I have Office 2013 32-bit and Windows 8.1 64 bit. I believe that Presenter installed itself automatically in the installation process as a 64-bit application.
    When I press the 'record now' icon on the Presenter toolbar, PowerPoint opens the current displayed in Slide Show view and I get the following error message:-
    "Adobe presenter has encountered unexpected problem while working with this presentation......" etc.
    This video recording feature from within PowerPoint has worked just fine on my system with the identical setup as mentioned in my opening paragraph but it's suddenly stopped working for some reason? I checked and do have the latest graphics driver.
    The stand - alone video creator tool records video outside of PowerPoint just fine but as stated, I can’t execute recording from the ‘record’ icon on the Presenter menu in PowerPoint.
    I tried the following without success:-
    I created a new PowerPoint file and tried to repeat the recording process
    I ran PowerPoint as Administrator and ran the file ‘Adobe-Pr-VC.exe’ (in C:\Program Files\Adobe) as Administrator
    I uninstalled and re-installed Presenter
    I turned off my AV software and firewall
    I created a new Windows Administrator account and tried video recording within PowerPoint
    Anyone have any ideas on what else I could try?
    Peter

    Solved! In the end, the solution was simple!
    I went to the PowerPoint 2013 ribbon and clicked on 'Slide Show' and unchecked 'Use Presenter View' and video recording from within PowerPoint immediately started working fine. Previously, the 'Use Presenter View' box had a check mark in it. When you click on the record video button in Presenter, PowerPoint goes into slide show view and clearly Presenter doesn't like PowerPoint opening the Slide Show view in Presenter view.
    I picked up on this from another PC I have with PowerPoint 2013 and Adobe Presenter 9. The video recording feature worked every time on that PC and I noticed that the only difference was that the newer PC had a check mark next to 'Use Presenter View' where as the older PC setup didn't.
    So everything is working well now!

  • Video recording, playback and music playback stop every few seconds after 5.0.1 upgrade

    Hi,
    Ever since I upgraded my iPhone4 to 5.0.1 it randomly stops during recording of video or playing back of video or music!
    This is very annoying, anyone experiencing the same?

    See if this Link offers any assistance
    iPad Unable to Update or Restore
    http://support.apple.com/kb/ht4097

  • Video record wont stop

    Hello
    When I start a video record the iphone will not stop recording. If I force close then the video is not saved. Am I doing something wrong. Let me know thanks

    Hey mauricefrommississauga,
    So when you tap the Record Video (stop) icon, or press a volume button again, the video recording does not stop.
    Take photos and videos - iPhone
    Shoot some video. Choose Video, then tap the Record Video button to start and stop recording. Video records at 30 fps (frames per second). With iPhone 6 or iPhone 6 Plus, you can switch it to 60 fps in Settings > Photos & Camera.
    Although that symptom is not specifically mentioned in the camera troubleshooting article, please try these steps from the top.
    Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
    3. Restart your device, then open the Camera app again.
    4. If your device has a front and rear camera, try both cameras by tapping   (camera swap icon).
    Please let us know what works.
    Regards,
    Nubz

  • BB bold 9791 video recording stops after 1:58 hrs

    I tried using sd card which is 32GB even though the recording stops after recording for 1:58 hours for each video and it displays a message something like  "no space available to record video". How to record continuously untill the memory is full.
    Thanks and regards,
    Ghouse 

    bbblogger wrote:
    Dear team.,
    1) Just for the record, It was the original blackberry charger. 
    2) The pic is removed from my blog. 
    3) I have been a loyal customer  and I don't have any reason to waste my time unless I have proof. I have a business to run. 
    4) WHY HAS BLACKBERRY SERVICE BEEN HOLDING MY PHONE FOR 2.5 years if there's is no fault on the phone? 
    5) Redington is being very responsible with service. Everyone in the coutry know that. Don't pass on the blame. 
    Blackberry is responsible for their products and defects. 
    6) Do you really think it's ok if 1 or 2 customers got electrocted? you can just pass the blame? 
    thanks. 
    Concerned news channel is looking into it this matter. 
    2) So the picture was fake? Not you, but of someone else you found on the internet?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Video recording issues (it jumps and the audio sto...

    Dear Support team,
    I was very satisfied with my phone for a couple of months but nowadays I've an annoying issue with the video recordings of my Nokia Lumia 920. I've noticed in the past few weeks that there's a "bleep" or a "jump" in each video I take. (Nokia Camera software, Lumia Black, RM-821_eu_hungary_434)
    It's very dissapointing because every video is let's say faulty at some point of the video.
    For example please take a look at the following video at 0:34 where not just the video "jumps" but the audio recording also stops for a couple of seconds:
    https://www.youtube.com/watch?v=xD9R2x5Kx4c
    The interesting thing is that during the next 21 minutes it did not make any mistakes while recording.
    Please take a look at an another example at 3:31:
    https://www.youtube.com/watch?v=hYQ5vNY-BUw
    If you're interested in debugging the issue I can send you somehow (by FTP or so) the original files as well.
    I have got more videos which are like this and it was shown like this on the phone's screen as well so I've ruled out the possibility to have an issue while transfering it to my PC.
    I'm assuming that possibly there's something wrong with the Lumia 920's RAM memory or with the 32GB internal storage drive, e.g.: let's say bad sector like on hard drives.
    The phone recently had it's first freezing while I was reading my facebook the phone suddenly went black and restarted.
    I still have 1,5 year warranty on my phone but I've bought ~150 km far away so I hopeI won't need to travel there and wait for weeks and to travel there again to get my phone back! What do you suggest?
    Is it possible that it's rather a software issue not a hardware? Or should I return my phone to the retail shop or is there any downloadable software patch to correct this issue? Is this a known issue to you?
    I've noticed one more thing: when I'm using my phone for e.g. like 10 minutes it's back cover gets warmer and warmer somewhere around the camera; I thought first it's because of the higher processor and battery usage but I don't think it's normal. The "heat issue" is also present while playing with a game.
    Info: my battery lasts for 1,5 day or so by very moderate usage, is it normal? (4 times a day wifi for 5-10 minutes, max. 1 pcs one minute call per day)
    Thanks for your help in advance,
    Best Regards
    Richárd Márk NAGY

    Hi All,
    I'm shocked about this device as you know I was disappointed due to the video recording glitches previously, but what yesterday happened is the worst I could ever imagine: I've recorded 3 videos and from this 3 videos 2 are unplayable even on my phone and on my PC, it gives an error message: "The video failed to play".
    The 2 files can't be seen in the camera roll only by using Pocket File Manager.
    I was able to copy all files to my computer:
    WP_20140802_21_16_58_Pro.mp4 - 661 203 084 bytes - playable
    WP_20140802_21_22_19_Pro.mp4 - 3939 658 131 bytes - unplayable
    WP_20140802_22_13_59_Pro.mp4 - 3235 991 965 bytes - unplayable
    To me these 2 videos are really very important, please help me to recover them! Please tell me, how you want me to send the files as they're, ~4GB each, by using Onedrive or how?
    If this issue won't be solved I'm considering NOT TO BUY a Nokia again! Can it be a hardware related issue, e.g. faulty internal flash? Should I return the phone to the retail shop?
    Regards
    Richard Mark NAGY

  • Nokia Lumia 1520 Video recording/playback issues.

    I seem to have issues with video recording. Video seems to have some pause "still" effects when taking video and playback in phone shows those stops very clearly as it freezes for while and jumps many seconds forward.
    When I play same file in PC with video player the video plays better but still I can manage to see some small Glitch in video like my phone did stop recoding for some frames.  I have been using SD card and phone memory and both have same problem.

    No solution so far and it is my wife phone so haven't have much reason to play with it find solution. She only takes photos anyway.
    This current phone has already broke down 2 sim cards also or wireless charging did brake those not sure after stop using wireless charging 3rd sim card have been fine.
    someday when have I feeling to take this phone to warranty service I will try wireless charging again.

  • Dual video record limited

    I bought S5 for unlimited dual video recording.   Now will return because a 10 min limit is imposed.  Who knows where and under what temperature I am operating.  This is foolish.  On my motorcycle handlebars it will be cooled just fine at 70 MPhil and less.

    Hey mauricefrommississauga,
    So when you tap the Record Video (stop) icon, or press a volume button again, the video recording does not stop.
    Take photos and videos - iPhone
    Shoot some video. Choose Video, then tap the Record Video button to start and stop recording. Video records at 30 fps (frames per second). With iPhone 6 or iPhone 6 Plus, you can switch it to 60 fps in Settings > Photos & Camera.
    Although that symptom is not specifically mentioned in the camera troubleshooting article, please try these steps from the top.
    Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
    3. Restart your device, then open the Camera app again.
    4. If your device has a front and rear camera, try both cameras by tapping   (camera swap icon).
    Please let us know what works.
    Regards,
    Nubz

  • I am running my canon camera on the EOS utility program for mac, and i was wondering if there is a keyboard shortcut to start video recording, instead of using the mouse.

    I am using EOS utility for MAC to run my canon camera at work. I have a foot switch connected to my macbook that allows me to take snapshots with my foot while i work ( i am a dentist and i have my camera hooked to a microscope). the way i did that is by programming a keyboard shortcut that snaps photos on EOS utility, to the foot switch software.
    So my question is: On EOS there is a video recording function, so i was wondering if there is a keyboard shortcut or if i can create a keyboard shortcut for the start/stop record function for video recording..

    Hi
    How much free space do you have on your boot disk ( Macintosh HD)?
    You may also like to add your current OS ;-)
    CCT

  • N85 video recording problem

    hi, I´ve got a serious problem with my N85. When I try to record a video in high-TV-quality(to my microSD card) it starts to lag extremely after about 8 sec., same problem with normal TV-quality after 30 sek..
    Another interesting part is that after I stop the recording the video is saving for about 10 sec.!(even if the video is only 1 sec. long)
    It works fine if I save videos to internal memory! My 8GB card is original and only 45% filled (so about 3.6GB free)
    But now the interesting Part: It worked fine before(with the same SD card), the video didn´t lag and it was saved in about 1 sec. I didn´t add anything to my phone, so what could be the problem??
    thanks for your help

    I´ve testet the problem for a few weeks now and I noticed something. the video stuttering is gone when I delete older videos(they have to be older than 4 days), after i do that I can record a video up to a length of 10 min(or even longer, if I had time to try) but after 1 video the effect is gone, even if I delete the just recordet video. I also experienced that deleting a good video(non-stuttering) takes a lot less time than to delete a lagging one.
    to sapporobaby: it sure is the way date is being written to the card, cause it is working if I record to phone memory, but I didn´t buy a Nseries device to capture videos with only 2 min. length.
    Furthermore this problem is not listet in the changelog for the new SW
    can anyone help me?

  • Quicktime - New Video Recording using Canon HV30 - Codec?

    I'm using Quicktime Pro 7.4.1 with a Canon HV30 connected via firewire. In Quicktime preferences pane, the HV30 is the video source with "Device Native" as the Quality setting. Though, I can't see a preview in the Quicktime window while recording, it does appear to record footage. When I stop the recording, it says that I don't have the codec to view the footage and sends me to the Quicktime plug-in page on this site, but I have no idea what I need.
    Considering some of the codecs (if not all of them) cost money, I'd rather not buy something that won't fix my problem. Anyone have any ideas?
    EDIT: Oh yeah, the camera is set to HDV 1080i60 video standard. When I switch the camera to SDV, the Quicktime preview returns and everything works as expected.
    Message was edited by: Robbie Schneider

    a2043 wrote:
    When I try to start a new video recording I receive the following error:
    The operation couldn’t be completed. (OSStatus error -536870206.)
    I am using Quicktime Pro on an iMac running Mac OS X 10.6.5. Quicktime will work with iSight but not with my PS3 eye (usb webcam). I am able to choose the PS3 eye from Quicktime preferences and the video screen will show up with video from the PS3 eye (so I know that Quicktime recognizes the cam). But the error dialogue box appears immediately.
    Other information - I am using macam.component for Quicktime and the PS3 eye works perfectly with Macam.
    Welcome to Discussions, a2043
    Has anyone received this error before?
    I have not, but I do not use PS3 eye. If it is a "UVC" (usb video class) device, it should work with any Mac running Mac OS X 10.4.9 or later _without additional software drivers_. Some unnecessary drivers can conflict with your Mac's software.
    If desired, you can remove the file macam.component from /Library/QuickTime and restart Mac to see if the PS3 eye can work with QuickTime without the additional driver.
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

Maybe you are looking for