My presario is beeping 14 times when trying to upgrade ram.

I have a compaz presario CQ62z-200.  I bought 2x4 gig 204 pin SODIMM ddr3 pc3 from Crucial.  I took the bottom plate off and replaced the ram. However when I booted it is now beeping 14 times.  I tried to install the previous ram however still beeping. Can anyone please tell me what Im doing wrong. Ive looked up beeps for this laptop bu found nothing.

if there are two sticks then one is beneath the other is on top.  Make sure to install a matching pair.
did you hear them click into place?
are you sure you have the correct ram speed?

Similar Messages

  • Not able to open PDF or do any changes even if the PDF opens. Run Time Error is shown every time when trying to open PDF. Please help

    Hi,
    Not able to open PDF or do any changes even if the PDF opens. Run Time Error is shown every time when trying to open PDF. Please help

    Hi Shilpa ,
    Please refer to the following link and see if that helps you out.
    https://helpx.adobe.com/acrobat/kb/runtime-error-roaming-profile-workflows.html
    Are you trying to access the PDF with Acrobat or Adobe Reader?
    Regards
    Sukrit Dhingra

  • I am really having a horrible time when trying to do our Church announcements in FCP X. When I try to take a clip from the event to the timeline my clips expanded and my timeline zoom level does not stay in the original place. Help

    I am really having a horrible time when trying to do our Church announcements in FCP X. When I try to take a clip from the event to the timeline my clips expanded and my timeline zoom level does not stay in the original place it moves to the right and is max out which makes every clip that I bring to the timeline expanded.

    What format etc. are the video clips and what were they shot on?
    Before you do anything else, trash the preferences with this free app:-
    http://www.digitalrebellion.com/prefman/

  • IPhone 4s reboots many times when trying to sync with iTunes

    iPhone 4s reboots many times when trying to sync with iTunes.
    Since IOS 8, my iPhone 4s reboots many times when trying to sync with iTunes on my Mac. It will start running the backup and reboot, it will reboot many times when updating packages. It can take 12 hours to finish a sync with the mac. The phone gets hot during this. I keep deleting more and more pictures and apps, hoping that maybe it doesn't have enough space, but iTunes shows I have 4.9 Gbytes free, which I think should be enough.  I am on IOS 8.0.2, I thought maybe I would try to upgrade to the latest IOS today, but I am worried that I will end up with a non working phone.
    Is anyone else having these problems?
    Ed

    Well thats Od... I have never experienced that problem.. Maybe you should try to backup your phone and then wipe it by going to Settings<General<Reset

  • Aperture recently started listing Facebook albums multiple times when trying to select an album to share to.

    Aperture recently started listing Facebook albums multiple times when trying to select an album to share to.

    I've seen this duplication once or twice before - in my case it was with SmugMug.
    Try removing the Facebook account from within Aperture, and then re-adding it. It should resolve the issue.

  • MacBook  Pro screen glitches out, gray lines appear on it then my computer freezes and must be restarted sometimes it will beep 3 times when restarting and other times it won't. Is this a virus?

    I have a MacBook Pro running mavericks. Sometimes the screen glitches out, gray lines appear on it then my computer freezes and must be restarted sometimes it will beep 3 times when restarting and other times it won't. Is this a virus, software issue, water damage, etc? An error message usually appears after being restarted. It does it all the time please help.

    No Virus. You have a Hardware Problem. 3 Beeps means a RAM problem. You could try Reseating the RAM is its sockets.
    But that wouldn't necessarily cause the screen to Glitch Out, as you say.

  • My macbook beeps three times when turned on and won't boot up continues beeping. any ideas?

    when i power up my macbook it begins loudly beeping 3 times. it wont boot and the screen is white and blank.
    Any suggestions?It never stops beeping 3 times.

    You have some bad RAM in there. Just replace it and it should take care of it.  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

  • Getting message "we are unable to complete your activation at this time" when trying to update iphone 3gs to ios5

    After downlaoding ios5 and installing I get the message "we are unable to complete your activation at this time" when trying to update iphone 3gs to ios5 using itunes. Can anyone help?

    Hi David,
    any luck later?
    I'm experiencing the same issue and I see that you're also posting from China. Not sure is location-related but if you managed to activate you iPhone: how did you do it? Just keep on trying?
    I'm a bit fed up of trying. It's already two full days...
    Thanks, ciao.
    Stefano, Shanghai

  • Sharepoint 2013 webDAV PROPPATCH fails with status code 409 error every time when trying to set custom property.

    Sharepoint 2013 webDAV PROPPATCH fails with status code 409 error every time, when trying to set custom property.
    anyone have any idea

    Hi
    Stumbled upon the resolution myself. The Bean Area item needs to be set to Visible=Yes in the property palette for the bean within Forms Builder, and also the implementation class also in the bean's properties must match exactly the package & class name specified in the PJC (my full implementation class string had to be set to oracle.forms.demos.runApplication).
    As this bean has no user interface component, and since the Visible property has to be set to Yes, to avoid having a random square shape for the bean sitting on the form's canvas, I also set the Width and Height properties for the bean to 0.001. This does show a very small dot on the form, but that will be acceptable.
    So in summary there has been a change for PJC / Bean Areas between 6i and 10g Forms, in 6i you could have the Bean Item to be set Visible=No, and the SET_CUSTOM_ PROPERTY built-in would work, however in 10g Forms the Bean Item must be set to Visible=Yes for the SET_CUSTOM_PROPERTY built-in to work.
    Daryl

  • IMac shuts down when trying to upgrade from Tiger to Leopard

    My iMac, purchased in November of '07, came installed with Tiger but also came with a Leopard OS update disk. When trying to upgrade to Leopard last week, every time I rebooted off the disk the computer would run for a minute in the gray screen and then suddenly shut off with no warning message. I checked HD in disk utilities, repaired my permissions and tried again with the same results. I've got 30 gigs of free space and 4 gigs of RAM which should be plenty. I talked to Apple support who walked me through the installation procedure with the same results and ended up shipping me a new install disk which came today. I am getting the same shut down on reboot with their replacement disk. Apple actually sent me two white disks. The first is labeled "For Mac Computers, Mac OSX Install disc 1" The second is labeled "MacBook, Mac OSX Install Disc 2" Since the second disc is label "MacBook" is it possible they sent me the wrong set of discs?
    Thanks

    rk87,
    Thanks for replying. I have a 500 gig hard drive which yields a 465gig usable capacity, so, at 30 Gigs available, I don't have 10% of the drive free. This may be an issue, but my more immediate problem is that I can't get the install disk to boot up at all.
    I called apple support again see what I could find out about the install disks which wouldn't work. The support guy seemed like he had a lot of knowledge about the system and suggested trying the Tiger install disk (that came with the machine) to see if it would boot up, which it did. After that success, I tried the Leopard update disk in another iMac I have at home and it worked as it should. Since the disk worked fine on the other mac, the guy at tech support speculated that there is some sort of hardware issue causing the install shut down on the computer in question.
    His speculation was about the memory installed in the machine which might be the issue. I had bought the computer from an Apple Authorized store here in town who upgraded the RAM to 4GIGs using third-party memory. Even though the memory seems to have functioned properly for the past year, apple support says that there could be some sort of incompatibility with the third party product causing the install disk not to work.
    Apple support told me about running a memory diagnostic off of the Tiger install disk by rebooting with the disk in the computer and hold down the "D" key. After I got off the phone I ran the test which turned out to take an hour in its long version. The test indicated no problems, but apple had told me that it might not be totally conclusive. At this point, I'm taking the computer back to the store where I bought it and will let them figure it out.

  • TS3694 Hi I am getting an error 3194 when trying to upgrade my ipad 2 to IOS v 5.1, any tips?

    Any advice on the eror code 3194 when trying to upgrade to IOS v5, i cannot download the lateste version of iTunes and cannot do a restore because of this error?
    Thanks

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    See
    iOS 5: Updating your device to iOS 5
    http://support.apple.com/kb/HT4972
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
    Tip - You may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • Issue when trying to upgrade FB 4.7 to AIRDSK 3.6

    Hi,
    I'm desperately trying to upgrade FB 4.7 to AIRSDK 3.6 since 3 weeks.
    I've followed the various solutions found on forums and the various processes displayed by the "helpx.adobe.com" pages, but none of them works.
    So please, if a member of Adobe Support Team or someone who succeeded to perform the upgrade reads this, I need help and if possible a detailed strp by step process.
    Thks in advance for answers.

    I think i tried all the available ones, and there are many. Why can't we
    have a definitive automatic upgrade solution instead of having to do
    such a number of manipulations ?
    Le 14/03/2013 04:41, Flex harUI a écrit :
    >
          Re: Issue when trying to upgrade FB 4.7 to AIRDSK 3.6
    created by Flex harUI <http://forums.adobe.com/people/Flex+harUI> in
    /Flex/ - View the full discussion
    <http://forums.adobe.com/message/5146932#5146932

  • Error code 23 when trying to upgrade???

    Error code 23 when trying to upgrade/ also have lost wi-fi connection.  A coindence or related problem?

    Hi Dauby51,
    You may need to uninstall and reinstall PSE 11, then reapply the updates.
    Make sure you don't have any disk cleanup utilities that might be running during and after the install that may be altering any of the files installed or installation paths.
    Give this a try and let me know how it goes,
    Regards,
    Pete

  • Error when trying to upgrade scsm dw 2012 sp1 to r2

    Hello,
    when I trying to install scsm 2012 r2 upgrade on my scsm dw server error appears.
    does anyone faced and successfully resolved this problem?
    regards,
    Ilgar
    Regards, Ilgar Khalilov.

    This issue might happen if you have a space in the DW Management Group name.
    Maybe this blog post from Anders Asp is helpful:
    Strange error message when trying to upgrade SCSM 2012 Sp1 to SCSM 2012 R2
    Andreas Baumgarten | H&D International Group

  • When tried to upgrade iphone 4S from 8.1.2 to 8.1.3 it crushed at the middle, after it it not let it tern on and cannot make recovery and crush in the middle of the process with "could not be restored. An unknown error occurred (3014)"

    When tried to upgrade iphone 4S from 8.1.2 to 8.1.3 it crushed at the middle.
    After it it not let it tern on and cannot make recovery and crush in the middle of the process with "could not be restored. An unknown error occurred (3014)"

    Hi bahaluly,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like you are not able to update the iPhone. I would recommend that you read this article, it may be able to help the issue.
    Get help with iOS update and restore errors - Apple Support
    Solve network errors
    Related errors: 17, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, 3200, or "There was a problem downloading the software," or "The device isn't eligible for the requested build." These alerts mean that your computer is either having difficulty contacting the Apple update server or communicating with your device. 
    Check your computer for software or settings that might cause communication issues between your computer and Apple or between your computer and your device.
    Cheers,
    Mario

Maybe you are looking for