My presentation that i created with keynote in my mac os x 10.9.2 on my pc is a folder!

so for me it's impossible tu put the presentation with itunes! This presentation is important for me! How can change something so on the pc I'll see the presentatione like a file and not e folder?!?! On my mac I see the presentation perfect like a keynote file but i sincroniza my ipad with the pc that i have in the office!
Please help me!
Thank yuo

Perhaps the issue is that the PC does not have Keynote, so it turns them into folders. If you need to see your Keynote files on the PC, you could put them in iCloud.com and access them there.

Similar Messages

I cant open pages documents on my ipad that i created with my mac

When i create a document on my Mac, and try to open it on my iPad I get a message "Document couldn't be imported." What is going on? I thought that iCloud was supposed to allow me to use Pages across all my Apple devices. Is this an iOS specific problem, or is it just a problem with iWork on iCloud problem?
Is anyone having the same problem?

Gail, you are wonderful! That solved the problem. My Keynote docs are now downloading, and the docs I created with Pages on my Mac now open on the Mini.
Muuahh!
gail from maine wrote:
Do you have "Documents and Data" checked in iCloud on both the Mac and the device?
If you do, then try resetting your iPad (nothing will be lost) and trying again: Hold down both the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears (up to 30 seconds). Once the Home screen redisplays, see if you can open your document.
Cheers,
GB

HT2513 my iCal calendar that I created with the color green keeps changing to purple. no matter how many times I change it to green, it turns it back to purple. Of course this only happens with iCloud and not "from my Mac". Any ideas?

my iCal calendar that I created with the color green keeps changing to purple. no matter how many times I change it to green, it turns it back to purple. Of course this only happens with iCloud and not "from my Mac". Any ideas on how to correct this? This seems like a trivial error, but it's super annoying.

I called Apple and they said that they know about this problem. It's a problem with iCloud which their Engineers know about. (there was a new iCloud release, hence...) No ETA for a fix yet. I asked that this be escalated so Engineering doesn't put it at the bottom of their fix list. I talked to a Senior Advisor and mentioned to them to have QA check their regression tests as this has happened before to me (the problem just didn't take this long to resolve). I like to use green too for important stuff, so I've resorted to creating a new calendar using the normal calendar green for events going forward. They could have picked another color besides green to have this problem with and I wouldn't have been so upset. ;-)

Convert an integer value that was created with the Excel DATEVALUE formula to a valid date?

Hello everyone,
How can I convert an integer value that was created with the Excel DATEVALUE formula to a valid date in SSIS?
Is this even possible?
For example:
=DATEVALUE("8/22/2008") will format the cell to display 39682.
Reading the column as a string to get the int value (39682) - how can I turn this into a valid date using SSIS and then importing the real date to sql server?
Thank you!

You can use Script component for this and convert your integer values to Date. An example here is following:
CultureInfo provider = CultureInfo.InvariantCulture;
string dateString = "08082010";
string format = "MMddyyyy";
DateTime result = DateTime.ParseExact(dateString, format, provider);
Source: http://stackoverflow.com/questions/2441405/converting-8-digit-number-to-datetime-type
Vikash Kumar Singh || www.singhvikash.in

Restore old images that were created with Netware ZDM

We have issues to restore old images that were created with ZDM 7 on NetWare. PXE booting works, everything looks okay, but when we should see the progress bar of the imaging process, we just stuck.
Creating a new image works fine. Restoring the newly created images also works fine. It is only restoring the old images that were creted with NetWare ZDM.
Should this cross platform imaging work at all? Assuming that we are on the same ZDM version level on both environments?

tcsabina,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Does adobe muse support flash that was created with lightroom

does adobe muse support flash that was created with lightroom

I suspect your PhoneGap app was flagged as running on both iPad and iPhone. You'll need the same from DPS. You can do this in AppBuilder at the start of the wizard where it asks what kind of devices you want to support. Note that this is only available to DPS Professional and Enterprise customers. If you are a Creative Cloud customer building a Single Edition application it will only support iPad.
Neil

If i have a file that i created with an older Illustrator version, will it still open on the latest Illustrator?

If i have a file that i created with an older Illustrator version, will it still open on the latest Illustrator?

favela,
It will, but there may be certain changes, which may be profound, especially live Type, depending on the version and thereby how many times the text engine has been changed.
The proof of the pudding is the eating. You may download a CC trial here:
http://www.adobe.com/downloads.html?promoid=JZEFS

After Effects CS6 connot open files created with CC 12.1 Mac version

After Effects CS6 connot open files created with CC 12.1 Mac version. Is there an update?
I am running Windows 7 Pro and Adobe CS6 Suite with all updates

You are never able to open projects from one version of After Effects in an earlier version. This has always been the case.
You can use the command File > Save As > Save A Copy As CS6 to save a version of the project from After Effects CC (12) that can be opened in After Effects CS6 (11).

Why cann't i see the cube that i create with owb ??

hello:
owb version:10.1.0.4
db version:10.2.1.0.1
Business Intelligence 10.1.2.0.2
windows 2003
i use owb create 3 dimensions and 1 cube,and deploy on target schema successfully.
and export the metadata to eex file, and import eex file into discoverer administrator ,when create workbook i can see the cube created with owb;
then i selected ORACLE BI DISCOVERER option to connect target_schema,so i can see my cube and dimension;
but when i selected ORACLE BI DISCOVERER FOR OLAP option to connect target_schema, login in successful , but when i create my workbook ,cann't see my cube and demension
why for this,and how to do it,so i can see them?
pls help me!

There are three ways to deploy a multi-dimensional model and the final model selection depends on the database options you have purchased and they tools you have at your displosal:
relational access - You can define relational cubes and dimensions within OWB and deploy these to your target schema. The dimensions are implemented as query re-write objects and can be viewed within the view USER_DIMENSIONS. The data relating to the dimension is stored within a simple relational table, either as a snowflake or star schema format. The cube object does not really exist as such but is implemented as fact table. Typically, access to this type of implementation is via Discoverer and you need to create a Discoverer EUL to view the deployed tables. Within Discoverer you will not see the dimension or cubes listed but you will see tables and/or views relating to your deployed schema.
The Discoverer Bridge will create the eex/EUL file to install the schema within Discoverer Administrator. However, you must use Discoverer Plus/Viewer with the relational connection details.
As an FYI the management of Discoverer EULs is integrated within OWB 10gR2.
OLAP models - OWB also supports the deployment a schema as either a relational OLAP model or within an analytic workspace (this creates a MOLAP model). The OLAP deployment can be viewed only using Discoverer OLAP, however, management of the schema does not require an EUL and the administration is managed by Discoverer Administrator. All the administration is managed by OWB. To access a multi-dimensional model using Discoverer OLAP you must first run the OLAP bridge from within OWB. This will deploy all the required metadata for Discoverer OLAP to connect to your schema.
However, I would recommend you urgently upgrade to OWB10gR2 as this provides additional tuning options for the OLAP data model that are not present in your current version of OWB 10.1.0.4. Unfortunately, with your current OWB version building an OLAP model is a two stage process, a form of data staging. You need to create a relational target schema first and then replicate that target schema within an OLAP model. OWB10gR2 allows you to map data from a source object directly to a multi-dimensional object with no need to stage the data.
If you cannot upgrade at this point my suggestion would be to use OWB to design the target relational schema and then use Analytic Workspace Manager (AWM) to design your OLAP schema for Discoverer OLAP access. AWM will provide you with all the tools for tuning and managing your OLAP model within a 10gR2 database schema.
Once you have upgraded to OWB10gR2 you can stop using AWM as all the tuning features are within OWB.
Hope this makes sense and is helpful.
Keith

Is there anything that you can do to fix a pdf that was created with the wrong orientation?

Someone sent me 40-page pdf created from a document with landscape orientation that was output with portrait orientation. The pages are clipped off on the right and left. There is no way that I can see that you can change the orientation in Acrobat Pro and if it is converted into a Word document you can see most of the text, but there is still some missing, especially where there are tables. I don't have access to the original document. I was just curious if there was a way around this?

Thanks, that is what I figured. Just thought I would ask. Some of the text that was clipped off did appear when the pdf was converted into a word file, but not all of it.
Mary Jane

Invalid state in SQL query for a function that was created with no errors.

SQL> CREATE OR REPLACE FUNCTION overlap(in_start1 IN TIMESTAMP, in_end1 IN TIMESTAMP, in_start2 IN TIMESTAMP, in_end2 IN TIMESTAMP) RETURN NUMBER
2 IS
3
4 BEGIN
5 IF (in_start1 BETWEEN in_start2 AND in_end2 OR in_end1 BETWEEN in_start2 AND in_end2 OR in_start2 BETWEEN in_start1 AND in_end1) THEN
6 RETURN 0;
7 ELSE
8 RETURN 1;
9 END IF;
10 END;
11 /
Function created.
SQL> show errors;
No errors.
SQL>
SQL> SELECT * FROM tbl where overlaps(current_time,current_time+1,current_time-1,current_time+2) = 0;
SELECT * FROM tbl where overlaps(current_time,current_time+1,current_time-1,current_time+2) = 0
ERROR at line 1:
ORA-06575: Package or function OVERLAPS is in an invalid state
I do not understand why overlaps is returned as in invalid state in the query, when it was created with no errors earlier. Could anyone help me?

Marius
Looking at the logic you are trying to create it looks like you are looking for overlapping time periods.
Consider two date/time ranges:
Range 1 : T1 - T2
Range 2 : T3 - T4
Do they overlap?
1) No: T1 < T4 (TRUE) T2 > T3 (FALSE)
T1 --- T2
           T3 --- T4
2) Yes: T1 < T4 (TRUE) T2 > T3 (TRUE)
T1 ---------- T2
           T3 --- T4
3) Yes: T1 < T4 (TRUE) T2 > T3 (TRUE)
T1 -------------------- T2
           T3 --- T4
4) Yes: T1 < T4 (TRUE) T2 > T3 (TRUE)
               T1 ----- T2
           T3 --- T4
5) Yes: T1 < T4 (TRUE) T2 > T3 (TRUE)
           T1 --- T2
       T3 ------------ T4
5) No: T1 < T4 (FALSE) T2 > T3 (TRUE)
                T1 --- T2
       T3 --- T4Answer: Yes they overlap if:
T1 < T4 AND T2 > T3
So you can code the logic in your SQL as simply:
SELECT *
FROM tbl
WHERE range1_start < range2_end
AND    range_1_end > range2_startIf you go around implementing PL/SQL functions for simple logic that can be achieved in SQL alone then you cause context switching between the SQL and PL/SQL engines which degrades performance. Wherever possible stick to just SQL and only use PL/SQL if absolutely necessary.

Can't open projects with Imovie 5 that were created with earlier version

I can't open my Imovie projects that I created when using Mac OS 9.2 now that I'm using Tiger and Imovie 5.
I'm not sure what version of Imovie I created them with. Do I need to find an earlier version and open them in the classic environment, or is there some way of converting or importing them?
iBook G4 Mac OS X (10.4.2)

Theoretically iMovie 5 can convert old projects, but projects created in Mac OS 9.2 can be quite difficult, for OS 9 is very different than OS X. More about that here:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=1677339
Your best option is to use the version of iMovie that you used originally to edit the project. If the projects are really old, that may require starting up your Mac in Mac OS 9 (instead of running iMovie in the Classic environment, which is Mac OS 9 running inside Mac OS X.)
Your best solution may be to boot up in Mac OS 9 and use your old version of iMovie to export the project back to the camera, then boot into Mac OS X and import the tape into iMovie 5.
If you don't have a camera, export to a Full Quality DV movie, then import that movie into iMovie 5.
The camera will (probably) deliver the clips to iMovie 5 as clips, while the export to a Full Quality DV movie will not.
By the way, to see which version of iMovie last edited the project, drop the project file on the TextEdit icon in the Dock. The version is shown at the top of the file.
iMovie 2.1.2 was the first version to run in OS X, I believe. The last version to run in OS 9 had the same version number, unfortunately.
If your Mac doesn't let you start up in Mac OS 9, then say more about exactly what happens when you try to convert the project. Do you get error messages? What are they?
Karl

I want to user JAR button that i created with button maker

ive download one oh those java Button Maker and it creats me a jar file with .class file i want to use it on my Panel that ive created by myself
(im working with eclipse)
How do i do it?
tnx
Message was edited by:
deviance

Add the jar to your project?

I have many floopy discs with information that I created with "Adobe Home Publisher" How do I acces

i have used "Adobe Home Publisher" extensively in the past. I some how concluded that this application is no longer and has not been available for many years. I have many floppy disks that re loaded with important history and genealogy information that I would like to access. Is there any means of getting the information off these
floppy disks.
Jack D. Palmer

Read this on how to do that https://discussions.apple.com/docs/DOC-3141

Open/fill in form on Mac that was created in Windows? What Mac software needed?

Created a form in Windows using Acrobat Pro 9/LiveCycle Designer. Need to send this form to Mac user to fill out. He can't add info to form or see check boxes. What software does he need on Mac? Once he completes form will email data back to me to import to form, then I need to email completed form to him to open on his iPad, read & sign. What software does he need on iPad to open/see/sign form? He has the program that allows him to "overlay" and save signature.

I'm not aware of any software that allows XFA forms created with LiveCycle Designer to work with iOS. If you want PDF forms that will work on iOS you shold create them in Acrobat. These are known a Acroforms. Adobe Reader for iOS can then be used to work with the forms, but Readdle's PDF Expert has the most complete support for forms and JavaScript.

My presentation that i created with keynote in my mac os x 10.9.2 on my pc is a folder!

Similar Messages

Maybe you are looking for