My prgram crashes before it can open and I receive this error:

Problem signature:
Problem Event Name:    BEX64
Application Name:    Illustrator.exe
Application Version:    16.0.3.691
Application Timestamp:    50bb31df
Fault Module Name:    StackHash_1dc2
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    00000000
Exception Offset:    0000000000000000
Exception Code:    c0000005
Exception Data:    0000000000000008
OS Version:    6.1.7601.2.1.0.768.3
Locale ID:    1033
Additional Information 1:    1dc2
Additional Information 2:    1dc22fb1de37d348f27e54dbb5278e7d
Additional Information 3:    eae3
Additional Information 4:    eae36a4b5ffb27c9d33117f4125a75c2
Thank you for your help resolving this problem.

Does anyone have any suggestions? I restarted my PC and even tried to repair through the contol panel Uninsta; program. HELP!!!

Similar Messages

After Installing Itunes, it will not open and I receive this error, "The procedure point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVFoundationCF.dll"

Please help, cannot open itunes after uninstalling and reinstalling multiple times. Each time I receive the error message, "
The procedure point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVFoundationCF.dll

Does anyone have any suggestions? I restarted my PC and even tried to repair through the contol panel Uninsta; program. HELP!!!

I am trying to use sync outlook 2013 with icloud and am receiving this error - Setup can't continue because Outlook isn't configured to have a default profile. Check your Outlook settings and try again - can anyone help me out

i am trying to sync outlook 2013 with icloud and am receiving this error - Setup can't continue because Outlook isn't configured to have a default profile. Check your Outlook settings and try again - can anyone help me out

Here are two threads you may want to review. I'm sure there are others. Good luck!
https://discussions.apple.com/thread/3427840?start=0&tstart=0
http://www.slipstick.com/outlook/icloud-outlook-problems-syncing-calendar/

Intalled os x yosemite and my greys are displaying brown and Im receiving this error message -Checking 80 profiles... /Library/Application Support/Adobe/Color/Profiles/RedBlueYelllow.icc    Tag 'pseq': Required tag is not present. /Library/Applicati

Intalled os x yosemite and my greys are displaying brown and Im receiving this error message
Tag 'pseq': Required tag is not present on 4 of my color profiles
Thank you

EtreCheck version: 2.0.6 (91)
Report generated October 23, 2014 at 6:17:40 PM EDT
Hardware Information: ℹ️
    MacBook Pro (17-inch, Mid 2009) (Verified)
    MacBook Pro - model: MacBookPro5,2
    1 2.8 GHz Intel Core 2 Duo CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    NVIDIA GeForce 9400M - VRAM: 256 MB
    NVIDIA GeForce 9600M GT - VRAM: 512 MB
        Color LCD 1920 x 1200
System Software: ℹ️
    OS X 10.10 (14A389) - Uptime: one day 3:29:31
Disk Information: ℹ️
    FUJITSU MJA2500BH FFS G1 disk0 : (500.11 GB)
    S.M.A.R.T. Status: Verified
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / [Startup]: 499.25 GB (245.60 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    HL-DT-ST DVDRW GS21N
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple, Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Extensions
    [loaded]    com.sophos.kext.sav (9.2.50 - SDK 10.8) Support
    [loaded]    com.sophos.nke.swi (9.2.50 - SDK 10.8) Support
        /System/Library/Extensions
    [not loaded]    com.Seagate.driver.PowSecDriver (4.4.10) Support
    [not loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.39) Support
    [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.39) Support
    [not loaded]    com.wacom.kext.wacomtablet (6.3.9 - SDK 10.9) Support
    [not loaded]    com.wdc.driver.1394HP (1.0.9) Support
    [not loaded]    com.wdc.driver.USBHP (1.0.11) Support
Startup Items: ℹ️
    HP IO: Path: /Library/StartupItems/HP IO
    Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [running]    com.adobe.AdobeCreativeCloud.plist Support
    [running]    com.amazon.sendtokindle.launcher.plist Support
    [loaded]    com.hp.help.tocgenerator.plist Support
    [running]    com.intego.commonservices.statusitem.plist Support
    [running]    com.intego.netupdate.agent.plist Support
    [loaded]    com.intego.personalbackup.agent.plist Support
    [loaded]    com.intego.task.manager.notifier.plist Support
   [invalid?]    com.intego.VirusBarrierX6.alert.plist Support
[invalid?]    com.rim.BBLaunchAgent.plist Support
    [running]    com.sophos.uiserver.plist Support
    [running]    com.wacom.wacomtablet.plist Support
    [invalid?]    Kersh-Wellness.Activity-Monitor-Dock.plist Support
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist Support
    [running]    com.intego.commonservices.daemon.plist Support
    [loaded]    com.intego.commonservices.icalserver.plist Support
    [loaded]    com.intego.commonservices.metrics.kschecker.plist Support
    [running]    com.intego.netupdate.daemon.plist Support
    [running]    com.intego.personalantispam.daemon.plist Support
    [running]    com.intego.PersonalBackup.daemon.plist Support
    [running]    com.intego.task.manager.daemon.plist Support
   [invalid?]    com.intego.VirusBarrierX6.daemon.plist Support
   [invalid?]    com.intego.VirusBarrierX6.scanner.daemon.plist Support
    [loaded]    com.microsoft.office.licensing.helper.plist Support
   [invalid?]    com.rim.BBDaemon.plist Support
    [running]    com.sophos.common.servicemanager.plist Support
    [invalid?]    com.wdc.WDSmartWareServer.plist Support
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [invalid?]    com.citrixonline.GoToMeeting.G2MUpdate.plist Support
   [invalid?]    com.google.GoogleContactSyncAgent.plist Support
    [loaded]    com.google.keystone.agent.plist Support
    [running]    com.microsoft.LaunchAgent.SyncServicesAgent.plist Support
    [running]    com.spotify.webhelper.plist Support
User Login Items: ℹ️
    iTunesHelper    UNKNOWN (missing value)
    Antispam Engine    ApplicationHidden (/Library/Application Support/Intego/Personal Antispam/Antispam Engine.app)
    EvernoteHelper    UNKNOWN (missing value)
    Android File Transfer Agent    Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
    iAntiVirus    UNKNOWNHidden (missing value)
    SpeechSynthesisServer    Application (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
    Google Drive    UNKNOWN (missing value)
    EvernoteHelper    Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
    StatusMenu    Application (/Incompatible Software/StatusMenu.app)
    HPEventHandler    UNKNOWN (missing value)
Internet Plug-ins: ℹ️
    WacomNetscape: Version: (null) Support
    Default Browser: Version: 600 - SDK 10.10
    Flip4Mac WMV Plugin: Version: 2.3.8.1 Support
    OfficeLiveBrowserPlugin: Version: 12.2.6 Support
    WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 Support
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
    FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
    AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
    Silverlight: Version: 5.0.61118.0 - SDK 10.6 Support
    Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.7.3
    iPhotoPhotocast: Version: 7.0
    SharePointBrowserPlugin: Version: 14.2.0 - SDK 10.6 Support
    DirectorShockwave: Version: 11.6.0r626 Support
User Internet Plug-ins: ℹ️
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
    Picasa: Version: 1.0 - SDK 10.4 Support
3rd Party Preference Panes: ℹ️
    Flash Player Support
    Flip4Mac WMV Support
    NetUpdate Support
    WacomTablet Support
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
        12%    firefox
        10%    WindowServer
         4%    plugin-container
         0%    hidd
         0%    AppleSpell
Top Processes by Memory: ℹ️
    743 MB    firefox
    451 MB    plugin-container
    94 MB    Finder
    90 MB    mds_stores
    77 MB    WindowServer
Virtual Memory Information: ℹ️
    64 MB    Free RAM
    1.22 GB    Active RAM
    1.16 GB    Inactive RAM
    733 MB    Wired RAM
    9.37 GB    Page-ins
    119 MB    Page-outs
MacBook Pro, OS X Yosemite (10.10)

When I open Firefox, I receive this error code: Error ID Code: 8a2affaa-cb4f-4b96-9649-ecc39a102bb6. How do I fix this problem?

Firefox will not start, and I receive an error code. The characters change in each error message, but the heading is always: "An error occurred while processing your request". I would appreciate any help available to solve this problem.

This is likely due to an extension. For example, the Web Developer extension has a setting to open the error console, and some mouse gesture extensions have been known to open the error console.
To track down what extension is causing this for you, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Adobe in design cs2 crashes before it can open - Please HELP!!

Dear Wise ones:
I have been using my ID CS2 for years and all of a sudden I went to open it one day and it crashed before it opened. I tried this several times, sent crash reports to Adobe but when there was no response from them I decided to try to reinstall the suite.   I did this according to the instructions (deleted the files/folders as per the instructions, uninstallled acrobat etc), then tried to open the newly re-installed InDesign but it CRASHED again. I called Adobe today and after being on hold for 35 minutes was told they could not help me with CS2 and I should try the forum so here I am.
Attached is today's crash report. It starts with
"<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE AdobeCrashReport SYSTEM
"AdobeCrashReporter.dtd">
<crashreport version="1"
applicationName="InDesign" applicationVersion="4050"
build="4.0.5.688">
<time year="2010" month="1" day="25" hour="19"
minute="57" second="2" />
<user host="laptop.local" />
<system
platform="macintosh" osversion="10.4.9" ram="512" machine="Power Macintosh"
model="PowerBook6,4" cpuCount="1" cpuFreq="1333333328" busFreq="166402287"
/>
<crash exception="Read Only Memory Exception"
instruction="81830000">
<backtrace crashedThread="0">
   <thread
index="0">
    <stackStatement index="0" address="0x0874d1b8"
symbolname="_GetPlugIn"/>
    <stackStatement index="1" address="0x0874d440"
symbolname="_GetPlugIn"/>"
etc. etc. (as mentioned, full report is attached)
So far, the othe programs in CS2 open.
Please please help me. I have a show that opens in the beginning of March and I depend on In Design to make my artwork.
Believe me , if I could afford to go out and upgrade my MAC and version of CS, I would but unfortunately I cannot do that at this time.
Is there anything I can do to solve this problem?
I truly appreciate your time and assistance.
Thank you,
Jane

Well, the zip file works for me. The stack trace is not exactly enlightening:
   <thread index="0">
    <stackStatement index="0" address="0x0874d1b8" symbolname="_GetPlugIn"/>
    <stackStatement index="1" address="0x0874d440" symbolname="_GetPlugIn"/>
    <stackStatement index="2" address="0x2c040ff4" symbolname="__ZN7Command11DoImmediateEs"/>
    <stackStatement index="3" address="0x06094bdc" symbolname="___code_start__"/>
    <stackStatement index="4" address="0x060948ac" symbolname="___code_start__"/>
    <stackStatement index="5" address="0x06619e84" symbolname="dyld_stub_binding_helper"/>
    <stackStatement index="6" address="0x0661a378" symbolname="dyld_stub_binding_helper"/>
    <stackStatement index="7" address="0x06616b94" symbolname="dyld_stub_binding_helper"/>
    <stackStatement index="8" address="0x06605ffc" symbolname="dyld_stub_binding_helper"/>
    <stackStatement index="9" address="0x0662551c" symbolname="_GetPlugIn"/>
    <stackStatement index="10" address="0x00002c58" symbolname="_main"/>
    <stackStatement index="11" address="0x000024fc" symbolname="__start"/>
    <stackStatement index="12" address="0x00002370" symbolname="___code_start__"/>
    <stackStatement index="13" address="0xbffffd54" symbolname="unknown"/>
   </thread>
To me this implies something wrong with a plugin or a system library. Did you delete InDesign and your ~/Library/Adobe/InDesign folders before re-installing? Otherwise there might be something wrong with your OS...

How to make VI wait until data is saved before it can open and read data

I have developed two VIs for continuous monitoring. First VI is for acquiring raw strain data and saving it into a folder, let's say, every 10 minutes or every 100 Mbyte of data (for example, after monitoring for an hour, the folder will have 6 files, each of which contains 10 minutes of data). Second VI is for opening/reading/processing data files collected by the first VI. Right now, this second VI can handle only one file at a time. What I am trying to do is to have this second VI open the files one after another automatically. Also (here is what I think will be difficult part), I want the second VI recognize that a file is saved by the first VI before opening it (i.e., wait until the first 10 minutes of data file is saved by first VI, open and process this first data, wait until the second 10 minutes of data file is saved by first VI, open this second file and process it, wait until the third 10 minutes of data file is saved by first VI, open and process it........). Any help or comments would be appreciated.
Thanks in advance for your help.
Brdg.

Basically, If your purpose is to keep one thread from opening the file until the DAQ thread has finished with it, then the queue is what I would use.
All functions are on the ADVANCED | SYNCHRONIZATION | QUEUE palette.
Use the OBTAIN QUEUE to create the queue. Set the DATA TYPE to a PATH constant. This creates a queue of paths.
Pass the QUEUE REFNUM to both the DAQ VI, and the PROCESSING vi.
In the DAQ VI, when you write a file, take the PATH from the CLOSE FILE function and use ENQUEUE ELEMENT to put it into the queue (use the refnum you passed in).
In the processing thread, use DEQUEUE ELEMENT to fetch the path from the queue. You probably should use a timeout value of 1000 mSec or so. If you timed out, go check your PROGRAM RUNNING flag (so you can stop without waiting forever on the queue), and if you're not stopped, try again.
If the DEQUEUE ELEMENT returns WITHOUT a timeout, then open the path it gives you - the file is guaranteed to be closed, since you closed it before you enqueued it.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks

You have attempted to access a secure page without the appropriate authorization. I have used this website every week and today received this error message. I can access it with Internet Explorer.

I received an error message after attempting to log in to a website. Access prohibited. You have attempted to access a secure page without the appropriate authorization.
I access this website at least twice a week and now I get this error message. I am able to access this website through Internet Explorer. Is there something I can do to fix this problem, so I can use Firefox?

Maybe:<br />
Dafizilla Table2Clipboard: https://addons.mozilla.org/firefox/addon/1852

Do I need to uninstall itunes, before I reinstall it? I received this error message because of missing driver.

Received this message to reinstall itunes so do I uninstall it first?

You can, but it is not necessary.

Itunes crashes before it can open

Hi,
Dell Dimension with Windows Vista
I just upgraded Itunes and I try to open it and it says a problem has caused Itunes to stop working and no solution can be found. I have uninstalled and reinstalled it numerous times now with no luck. Also when I start my computer the Itunes helper module crashes just as it's starting up and any attempt to get it working again fail. Any help anyone could give would be greatly appreciated.
Please Help!!!

I'm having a very similar problem. A night or two ago I did a system update and since then I can't get Safari, iTunes or my Word to open. I don't know if there are any other applications affected, I don't really care, these are the ones I use practically everyday.
I did try to look at my activity monitor too since the spinning beachball and Safari closing on me was a common thing, and I did look at the inactive processes, and I did try to quit some of the processes that were under my name, since I could not log into the root user. So I probably messed something up there, but anyway...
I tried to restart, unplug the AC/remove the battery and hold power for 5 seconds, do the entire create a new account thing, delete the com.apple.safari.plist and no success. I also tried to do the repair permissions thing and it says "Repairing permissions for "Macintosh HD" Error: No valid packages Permissions repair complete.
Another weird thing is that the clock and airport icons are gone again from my bar. I had to put them back yesterday.
I know I will probably have to reinstall everything, I tried to do that, but I lost my discs in my move, so I know I will probably have to drive 3 hours to take it to a genius to fix, but I was hoping someone would have some clue or insite as to what I can do to try and fix this situation. I love my mac and my boyfriend is getting one this weekend (converted him from PC), so I don't want him to think they are bad at all!! Thanks.

I Updated to 8.0 and now firefox will not open and I receive an Error message stating that 7.0.1 is not compatible with Min version 8.0 and max version 8.0. What can I do now?

I tried uninstalling 7.0.1 and reinstalling it and still it would not update and problems such as losing my bookmarks, and it having different tool bars and add ons each time I opened it. I lost so many bookmarks and it became so frustrating that I decided to try and upgrade to see if that would overcome the problems. And now I have this problem. When I did a search on my hard drive to see how many firefox components there were I found firefox related files and documents all over the place and wondered if I should just delete anything related to firefox to clean any residual files that might be causing problems and then start a clean download, but I didn't want to delete files in windows and wasn't sure what I should delete and what I should leave. Can anyone help?? I miss my firefox and wish that I had never upgraded to 7.0.1 .

If you use ZoneAlarm Extreme Security then try to disable Virtualization.
*http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
See also:
*[[/questions/880050]]

I open iTunes and I received this error message (-45054), then my iTunes closes. How can I fix this?

After the latest update I did, 23Oct2013 7:30pm PT, my iTunes no longer opens up without the error message (-45054). I click "ok" to acknowledge the message and it immediately closes iTunes with no further information. Any help would be greatly appreciated, expecially if it's an actual employee of Apple. They seem to be way to into the user-helping-user system they need to step up.

Hi,
re: the dialogue: You do not have enough access privileges for this operation Error code -45054
A fellow musican I know had an identical issue with this and asked me to check it out. I fixed it and wrote a long set of instructions on my blog. His problem was with 10.6 but it was an update he did preparing to move to Mavericks.
I was able to reproduce the error by just removing the /Shared folder from /Users
Here is the link to the problem and the instructions on how I fixed1t
http://fixed1t-mac-support.blogspot.co.uk/2013/10/fixing-itunes-you-do-not-have- enough.html
Regards fixed1t
In order to comply with this form, I must point out that the fixed1t blog site does sell cheap Garageband and sampler support software and that I will benefit if you buy it. The reality is, nobody buys these days LOL ;-)

Why won't iTunes open and what does this error message mean?

I can't open up my iTunes. I've tried reinstalling it but it still doesn't work. I get an error message that reads: The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll. I press ok and then another message pops up reading: iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127). I don't get an error message when I hook up my iPod but it doesn't bring up iTunes either and restarting my computer doesn't seem to help. I don't want to completely remove iTunes from my computer because I'm afraid I'll lose most of my music since most of it were on CDs which I no longer have. Help?

I am having this same problem. I took Kappy advice on restarting the Apple Mobile Device Service, however that did not work. I got this message in a pop up window that came up immediately.
Windows could not start the Apple Mobil Device Service on local computer.
Error 1053 The service did not respond to the start or control request in a timely fashion.
I have already uninstalled itunes, all the related programs and I cannot reinstall, this Apple Mobil Device message stops the install.
Can anyone please help?

TS1368 "Cannot connect to the ITunes store" Trying to purchase through an app (Game Of War) and have received this error for the past three days. I can still purchase music through ITunes and I have read Apple's article on troubleshooting and none of th

Tried everything on Apples list for this issue with no luck. Any suggestions?

Ok I got it fixt.
Go to: https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/72/wa/directCallLandi ngIndex?wosid=tRtVd4bx348XlzN7Je9tb0&localang=en_US
Manage account, and resend your verification email..
Hope it helps.

My itunes does not open. I receive this error message:unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary

Process:         iTunes [6564]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         10.3.1 (10.3.1)
Build Info:      iTunes-10315501~1
Code Type:       X86 (Native)
Parent Process: launchd [143]
Date/Time:       2011-06-26 09:12:25.888 -0400
OS Version:      Mac OS X 10.7 (11A390)
Report Version: 8
Sleep/Wake UUID: 57AD9B95-8923-403C-BDB2-EBBBD4E1F09C
Interval Since Last Report:          40546 sec
Crashes Since Last Report:           6
Per-App Crashes Since Last Report:   5
Anonymous UUID:                      0B83B69E-63F7-4197-908B-49A24783F09F
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
@executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
Binary Images:
    0x1000 -   0xe50ff3 com.apple.iTunes (10.3.1 - 10.3.1) <DA5B3668-53FC-8550-A39C-06EB35AA692F> /Applications/iTunes.app/Contents/MacOS/iTunes
0x8fe00000 - 0x8fe3320b dyld (195 - ???) <33A6763E-295E-3FE1-9594-81B9E296BACC> /usr/lib/dyld
Model: MacBookPro7,1, BootROM MBP71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 5.100.198.11 )
Bluetooth: Version 2.5.0b13, 2 service, 19 devices, 3 incoming serial ports
Serial ATA Device: Hitachi HTS545025B9SA02, 250.06 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26100000 / 2
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24600000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06610000 / 6
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x06500000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x06300000 / 2

I have the same problem...
Process:         iTunes [498]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         10.3.1 (10.3.1)
Build Info:      iTunes-10315501~1
Code Type:       X86 (Native)
Parent Process: launchd [254]
Date/Time:       2011-06-27 14:23:04.822 -0400
OS Version:      Mac OS X 10.7 (11A390)
Report Version: 8
Sleep/Wake UUID: AC114B5B-BBDE-47BE-A34A-73D0CBEC2D1D
Interval Since Last Report:          21605 sec
Crashes Since Last Report:           3
Per-App Crashes Since Last Report:   3
Anonymous UUID:                      7CA002EB-2F78-46A8-B8FC-917C420125C9
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
@executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
Binary Images:
    0x1000 -   0xe50ff3 com.apple.iTunes (10.3.1 - 10.3.1) <DA5B3668-53FC-8550-A39C-06EB35AA692F> /Applications/iTunes.app/Contents/MacOS/iTunes
0x8fe00000 - 0x8fe3320b dyld (195 - ???) <33A6763E-295E-3FE1-9594-81B9E296BACC> /usr/lib/dyld
Model: MacBook4,1, BootROM MB41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB, SMC 1.31f1
Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.5)
Bluetooth: Version 2.5.0b13, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHY2250BH, 250.06 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, apple_vendor_id, 0x8501, 0xfd400000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8205, 0x1a100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0229, 0x5d200000 / 3

My prgram crashes before it can open and I receive this error:

Similar Messages

Maybe you are looking for